VPN from Site to Site of 2600 NSA does not work after upgrade to 6.2.0.1/6.2.2.0 6.2.0.0 SonicOS

Similar Questions

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

  I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
  The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
  I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

  Probably for a lot of traffic on the connection

  Were you finally able to download the driver?
  I could download the package without worrying about performance too

• "show my windows and tabs from last time ' does not work after upgrade to 8.01

  After I've upgraded to the latest v8.01 I lost all my tabs sites and even trying to add them and save them with the tools > Options > general > start > when Firefox starts selected have to "show my windows and tabs from last time" she does not hold registered sites and browser restarts it always loses all tabs and shows only a tab with Firefox home Web page. I need to open several sites to work and the only way to do it now is to make sure, I click on the current use in "pages" under General Option of the tools. It's getting very boring because I keep changing my tabs to different sites in a meeting and I am used to simply close the browser, based on making them all back in when you restart Firefox.

  Have you tried to delete the file or move it to another location?

  There should also be a file sessionstore.bak that contains the previous session, i.e. the sessionstore.js file found at the beginning of the current session and is used to restore the previous session via ' history > restore previous Session '.

  Also, make sure that Firefox is closed correctly and that there is not any suspended the process Firefox

• HP Pavilion 2000 - 2120TU Bluetooth does not work after upgrade from Win7x32 to Win8.1x64

  Hello

  I used my laptop HP Pavilion 2000-2120TU since Apr. 13.
  Initially it was without any OS, so installed Win7x32 Pro.

  After that, I downloaded and installed the drivers from the HP site and all features were OK, including Bluetooth.

  Now I have upgraded to Win8.1x64, once again, downloaded all the drivers from the HP website and install them, but the Bluetooth is not working properly.

  I downloaded

  Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows 8

  Try this one and if it does not, unfortunately, I won't be able to any more help this issue because I have no idea what the problem is.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_127984_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• Satellite U920T - 100 PSUL1E - WIDI does not work after upgrade from 8.1 to win

  Hi people,

  is there someone who has the job of WIDI? AFAIC he had a symbol WIDI in Device Manager @W7, after the W8.1 there is no way to make it work.

  Try to use the Intel driver fails because custom toshiba Driver, the last driver from Toshiba is dated with 28.10.2013 that should be a beginning driver W8.1 or W7.

  Is this something like the functionality of GNSS Broadcom? Build but still not usable?

  Hello

  According to Toshiba information I found in the bulletin of the technical support document, the Intel Wireless Display are no longer supported on Windows 8.1, but you may be able to connect to the external display wireless, if your computer supports Miracast.

  Here is the link to the doc:

  Important notice for users of Wireless Display (WiDi)
  http://APS2.toshiba-tro.de/KB0/TSB3903IF0000R01.htm

  By the way: the Intel display driver can be installed and updated but you have to do it in the Device Manager. You need to download a zip package containing the only driver files, and then you can update the driver using the procedure in the device manager that allows you to choose the driver folder that contains only files.

• Pavilion dv5020ca sound does not work after upgrade from xp to vista Home premium

  HP Pavilion Dv5020ca windows vista Home premium

  After the transition from xp to vista will not install the drivers for my sound card and the error message I got was

  cannot find media any help would be apperciated

  Hello:

  See if the works of audio driver XP installation...

  Download and run this driver.  If it automatically installs audio, very well.  If it's not... close any Windows error.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&DLC=en&LC=en&OS=228&product=3223544&sw_lang=

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver and at the bottom of this window software option, select Let me pick from a list of drivers for devices on my computer.

  Select disc and go to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver will install.

  Then restart.

• First Elements 10 does not work after upgrade from 8.1 to 10 Windows

  I haven't had any work in first 10 items from my computer updated from Windows 8.1 for Windows 10. Yesterday, I discovered that the videos I had edited and made first pay more. Videos 'Mpeg' now appear as "mi/gal." The original clips again will play, but not the edited videos.

  Is there a solution?

  I have to go back to Windows 8.1?

  If I go to the first 14 elements, these videos will be playable?

  First of all make sure that you uninstall and reinstall Premiere Elements after that you upgrade your operating system. Version 10 is a 32-bit program and will not be able to take advantage of the advanced architecture of Windows 10.

  Also to ensure that you have the latest version of Quicktim installed, according to the requirements of the program.

  If you have trouble running first Elements 10, the value that it is running in Compatibility Mode. It should work just fine - just not as well as new 64 bit versions of the program.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Transition from tables to call a library function does not work after the application builder

  Call a DLL with function of library to call that requires a data table to work properly in Labview, but after building an exe with the application generator, the call no longer works.  Dereferecing the pointer in the DLL returns all values 0 and not the real.

  So finally figured it out.  It seems that you cannot use the utilities of pointer in an exe built such asGetValueByPointer.xnode.  Once I replaced the calls with calls to DSNewPtr and MoveBlock library, everything works as expected.

• System Restore is missing from the start menu and does not work after upgrade from win98se to winXP Pro.

  I just upgraded to winXP Pro win98se. After doing so I discovered there are no ads for tabs "System Restore, disk cleanup, Disk defrag, scheduled tasks or System Info ' not listed in the"System Tools"menu, but the others are. I also noticed he wasn't an App icon. "Security system" in the control panel. I installed SP2 to try for a fix, but later he installed only the "security system" App.  I find 'rstrui.exe' in the C:\WINDOWS\SYSTEM32\Restore folder, but when I click it, nothing happens.
  I'm working on a laptop Dell Latitude cpi with a Pentium II 363 and 128 MB of Ram.

  The reason for all the downtime is you have 2 OS installed (partially), & windows

  XP is you expected in the Committee to xp & remove the possibility of return to 98... its been a long time

  but, open Disk Cleanup utility, remove the previous operating system (select all), once through, open the disc

  cleaning, locate the 'other options' button, select this option to remove all but the last restore point, close. Go

  to run, type: appwiz.cpl locate the large fo; der with the old operating system, remove it, close when thru.

  Run Disk Cleanup.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "History & clear Web site data" in Safari does not work on my iPhone 5 ios running 9.1.

  The "clear history and data from the Web site" in Safari does not work on my iPhone 5 ios running 9.1.

  How to determine you are exactly ?  It works fine on my 6s + 9.1 running.

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS