VPN IPSec running but you have to configure the NAT

I just established an IPsec VPN with one of our prividers, the EEG established VPN but the addresses in my LAN IP is in conflict with a device in my side suppliers. I am trying to configure NAT in order to avoid the conflict, but I'm naïve markets do.

This is part of my current configuration

the customer_outside object-group network

network-object X.X.X.X 255.255.255.248

the customer_inside object-group network

network-object 192.168.1.210 255.255.255.255

network-object 192.168.1.25-> conflict IP 255.255.255.255

network-object 192.168.1.38 255.255.255.255

customer_acl list extended access permitted ip object-group customer_outside-group of objects customer_inside

Crypto ipsec transform-set esp-3des esp-sha-hmac customer_ts

card crypto client 10 correspondence address customer_acl

client card crypto set 10 peers Y.Y.Y.Y

card crypto client 10 transform-set customer_ts

3600 seconds, duration of life card crypto client 10 set - the security association

customer interface card crypto outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

tunnel-group Y.Y.Y.Y type ipsec-l2l

tunnel-group ipsec-attributes Y.Y.Y.Y

pre-shared-key *.

Thanks for your help.

Hello Rafael,.

You can do it with a nat policy:

The host ip X.X.X.X 255.255.255.248 192.168.1.25 allowed access list TEST

public static 192.168.20.25 (inside, outside) TEST of the access list.

As nat goes first cryptography for VPN traffic, you'll need to include in the list of ACL of Crypto traffic from natted ip address (in this case 192.168.20.25).

Kind regards

Note all useful posts

Julio

Safety engineer

Tags: Cisco Security

Similar Questions

  • 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

    Original title: the user environment

    After starting windows, on the Welcome screen, this message always comes.
    "User environment.
    Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
    And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

    Thanks... :)

    This is typical of a corrupted profile.  To recover, perform the following steps:

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

    "How to perform disk error in Windows XP check"
      <>http://support.Microsoft.com/kb/315265 >

    HTH,
    JW

  • I bought the full version of adobe cc 2015, but it download the free version, you need an application (adobe application Manager) but I have'nt that the app, can you help me?

    I bought the full version of adobe cc 2015, but it download the free version, you need an application (adobe application Manager) but I have'nt that the app, can you help me?

    Hello

    In order to download the creative application of cloud refer:-Creative Cloud help | Creative cloud desktop.

    In case you get an error for the trial, visit:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  • Hello, I would just remove my ADOBE ID but I have not found the right place to post my question! Could you help me?

    Hello, I would just remove my ADOBE ID but I have not found the right place to post my question! Could you help me?

    What do you mean by "delete my ADOBE ID"?

    The following link might be useful.

    To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

    Support of Adobe ID and registration of chat (non - CC)

    http://helpx.Adobe.com/x-productkb/global/service-C1.html ( http://adobe.ly/19r6ZDp )

  • "You have to format the disk in the drive...". »

    Hello

    I had some problems with Vista is not able to read hard drive when I try to open my Buffalo external hard drive or my camera, I get the following message: "you must format the disk in drive x until you can use it." Vista reads both in RAW format, but I am absolutely certain that they are not - all of the two has worked very well until a few days ago, and both work perfectly on both XP and OS X. If anyone knows how to solve this problem, I would appreciate it a lot. Thank you

    RA

    Hello jaetejou2,

    Thank you for your response back!

    I suggest you to visit the link provided below to the support of Buffalo with your external hard drive.  I don't know your specific model, but there is a search.

    Buffalo support:
    http://forums.buffalotech.com/Buffalo/Board?Board.ID=SolvedStorageThreads

    However, he advised that it was working a couple of days, when you have submitted.  You did it changes on your operating system before this problem?  I suggest to try a system restore to a point in time where everything worked.  Please let us know status.  Thank you!

    The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
    http://support.Microsoft.com/kb/936212/
    James Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

  • Download worksheet of others generates you have not signed the Applications required database error

    Greetings,

    We use the 7.2.12.04.25 32-bit version of ADI on a machine IBM P750 running AIX 5.3.  The correct application of the Oracle is version 11.5.10 on a 10G database.  We have two users who are unable to download each other spreadsheets, but are able to upload their own.  Another user is able to download the worksheets created by both users who cannot download all other worksheets.  ADI settings seem to be the same, and users choose the same responsibility.  Database properties appear to be the same as well inside spreadsheets.  One option would be to copy the contents of the worksheet to the other person in one they have created, and then load it but this process is too cumbersome to entertain.  Has anyone met and solved this problem?  The mistake they see is "you have not signed the required Applications database.

    Thank you!

    Scott

    User418146 wrote:

    No - in the CRITERIA of worksheet tabs.  Column A on line 10 is "CONNECTION STRING".

    I don't think so.

    Could you please try to use the same GL responsibility first and see if it works?

    Thank you

    Hussein

  • Reinstal Cloud but not uninstal not possible as long as the app running, but not other applications in the Task Manager

    Hello

    I need to reinstall the Cloud but uninstal is not possible as long as the app running, but not other applications in the Task Manager.

    Windows 7

    Uninstaller: "another version of office of creative cloud or an installer Adobe is running...". »

    TaskManager: browser runs only.

    Windows Installer / change: "unable to désinstaller creative cloud to desktop. You still have creative Cloud computer applications that need it.

    So, how I re install this, thank you

    Safe mode using the application of Creative Cloud Uninstaller has worked.

  • Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window.

    When I try to open Firefox, I get this message:
    "Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window. »
    I then clicked close firefox, but the problem was solved not so I uninstalled and reinstalled firefox, but it's the same thing.
    At this point, I went to support Mozilla and tried the steps described in the article, "Firefox is already running but is not responsible for - How to fix error message", but the firefox.exe process was not in the processes tab in windows Task Manager. While he was in the Details tab, when I tried to put an end to the process, I received this message:

    "The operation could not be completed. Access is denied. "

    What can I do to fix this?

    Thank you.

    Usually when you stop and restart Windows, Firefox is not running and can be started normally.

    Firefox is set to start automatically with Windows? Microsoft has a utility to investigate what is set to happen at startup: https://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    It is possible that something is triggering a process in your default browser and it is the hanging of Firefox. You can try to change your default browser to IE (IE can offer to do when you start) before the shutdown and restart Windows to see if it makes a difference.

  • Why did you have to change the layout of Firefox?

    I would like to know why you've gone and changed the provision in the Firefox?

    I'm still on Fx 3.6.18 because frankly 5.0.1 is horrible.

    Why did you have to change everything and make a difference. Why couldn't you have given us the same layout as 3.6.18 but with these new updates.

    I will never download Fx5. 3.6 was perfect.

    Also how can I contact Fx without upgrading?

    Firefox 3.6.19 is available here.

    http://www.Mozilla.com/en-us/Firefox/all-older.html

    grumpyolman - got a message by MP, saying do not post if he has nothing constructive to post

    Regard to the caveat, you can't choose who can post in threads that you start. James offered a suggestion to customize the toolbars by linking this technical support article. Almost everyone who helps users here is volunteer, especially now in the wee hours of Sunday morning (USA), so please treat us a little more sympathetic. Separate your anger by changes in Firefox, people who are here to help. Most of us don't like the changes either, but we change what we dislike interface customization.

    Please see this - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines

  • Action menu is empty; "You have not installed the extensions.

    Like many others, share my Menu is empty after the upgrade to El Capitan. By running the recommended command here has no effect. In the system preferences panel, the only options on the left are all and share Menu. Share menu 'not allowed' in gray below. Everything indicates "you have not installed the extensions.

    Please read this message before doing anything.

    This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

    Step 1

    The goal of this step is to determine if the problem is localized to your user account.

    Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

    While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

    Test while signed in as a guest. Same problem?

    After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

    * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

    Step 2

    The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Please take this step regardless of the results of step 1.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

  • You have won in the Splash microsoft Award. ? real or spam

    receipt above e-mail

    Probably spam, but you have not we gave something to go.

    What email headers can tell you - it's actually a MS Server?

    He invites you to visit a website package or complete the attached request form?

    Details please!

  • Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team at the 800 448 custom

    Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team customer to 800 448 1642 for assistance. my credit card is already loaded, but not received numbers.please series suggest

    Hi Kunal,

    If the problem still persists, can you please contact the support for this issue through https://helpx.adobe.com/support.html#/top_products.

    Please do not hesitate to me message in person if assistance is needed.

    Concerning

    Stéphane

  • I have a redemption code, I used now when I logged my cc his watch App still the trial period and if I click on buy now it takes me to buy the plan page but I have already bought the plan. why it is not working?

    I have a redemption code, I used now when I logged my cc his watch App still the trial period and if I click on buy now it takes me to buy the plan page but I have already bought the plan. why it is not working?

    Hello

    Please see -https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

    Make sure that you are connected to your adobe id.

  • Why IS IT YOU CAN BURN CDA ITUNES AND PLAY IN car BUT YOU can NOT DO THE SAME WITH A DIVING USB FLASH

    iTunes

    Why is it you can burn a cd of your itunes playlist and play in a car multimedia system

    But you can't do the same thing with a USB flash drive

    You can drag all the songs in the playlist on the flash drive and they can be read from here. You can't burn in the iTunes menu except for a CD or DVD drive.

  • I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?

    I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?

    Find the serial number of your Adobe product quickly

Maybe you are looking for

  • El Capitan Version errors

    Another question, I have attached a screenshot. I posted the previous question, and it is showing that I am running on version 10.11.4. However, under "about this mac", it says that I am under 10.11.6, please see attached screenshot.

  • Satellite Pro U400 starts and overheating problems

    Hello 6 weeks ago, I bought a Satellite Pro U400. Shortly after that I bought, I noticed that the computer overheating. After 1 hour of use, it becomes very hot in the touchpad area, as well in the base of the computer and on the touchpad itself. It

  • Problem wireless, mute volume and area button button scroll volume

    The product name and number: HP pavilion dv6-2137sl Product number: WE047EA Operating system: Windows7, 64-bit All of a sudden my Wireless button, the mute button volume and the area scroll volume does not work... Please help me solve the problem. co

  • Laptop hung on the windows logo

    HpPavilion-g6-1394sa Freezes on the windows logo during boot (windows 7). Crashes when starting safe mode. Crashes when you try to go into recovery tools. Help please.

  • Server Windows 2008 R2 - can you use for a single user remote desktop after the initial 120-day grace period?

    I installed Windows Server 2008 R2.  During the 1st 120 days, remote desktop worked for multiple users.  Now that the 120 days are up, it is necessary to purchase client access licenses.  However, is it possible to activate the remote desktop for one