VPN Site to Site Secret shared and can co-exist RADIUS authenticated VPN?
Hello
I have a setup VPN site to site between two offices on 515Es PIX (v.6.2 software) and has recently added a vpngroup/shared secret based VPN remote access to one of the offices. Given that just forced me to add a number of different policies to my existing crypto card, it was a plant direct and easily implemented. For more security, I want to use a RADIUS server to give to each remote user their own connections and profiles rather than a group on all password is configured. To do this, however, it seems that I have to add the following additional commands to my existing crypto card:
client configuration address map mymap crypto initiate
client card crypto mymap RADIUS authentication
These do not correspond to the policy number (my site-to-site is 10, and remote access policy is political 20), so I don't know what the effect would be if I added the. It would cause my connection from site to site for authentication RADIUS request (a very bad thing)? If so, do I need another interface to bind a new encryption card to? The answer to this would be greatly appreciated!
Also, if anyone knows an example configuration for a similar configuration, I can look at, please let me know! Thank you.
-A.Hsu
For the site to site connection, you change line isakmp keys and add the parameters of "No.-xauth No.-config-mode" at the end of this one, which tells the PIX not to do the auth RADIUS or assign an IP address, etc. for the specific site-to-site tunnel.
Example of config is here:
http://www.Cisco.com/warp/public/110/37.html
Note that there is no command options I have just said, I just sent an email to the web guys to fix this. Basically, your config will look with the options "No.-xauth No.-config-mode" on the line «isakmp x.x.x.x key...» "for LAN-to-LAN tunnel.
Tags: Cisco Security
Similar Questions
-
I thought that the site broke down and I can't get rid of the message on my screen.
I try everthing, TI saids that site a crash and can, t get rid of
Hello
(1) is the issue limited to any particular Web site? If so, what website?
(2) what browser do you use?
(3) you get an error message?
(4) all the troubleshooting steps you have tried so far?
You can try the following methods and check if it helps.
Note: The troubleshooting steps apply to Internet Explorer.
Method 1:
Run the fixit from Microsoft available in the article below and check if it works.
Solve Internet Explorer add-on problems when IE hangs or freezes
http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
Method 2: Why some webpages look incorrectly in Internet Explorer 9?
Method 3: Try all the steps described in the article below
You can not view, access, or load some Web pages in Internet Explorer 8 and Internet Explorer 9
http://support.Microsoft.com/kb/967897Method 4: How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/ro
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
VPN site to Site btw Pix535 and 2811 router, can't get to work
Hi, everyone, I spent a few days doing a VPN site-to site between PIX535 and 2811 router but returned empty-handed, I followed the instructions here:
http://www.Cisco.com/en/us/products/ps9422/products_configuration_example09186a0080b4ae61.shtml
#1: config PIX:
: Saved
: Written by enable_15 to the 18:05:33.678 EDT Saturday, October 20, 2012
!
8.0 (4) version PIX
!
hostname pix535
!
interface GigabitEthernet0
Description to cable-modem
nameif outside
security-level 0
address IP X.X.138.132 255.255.255.0
OSPF cost 10
!
interface GigabitEthernet1
Description inside 10/16
nameif inside
security-level 100
IP 10.1.1.254 255.255.0.0
OSPF cost 10
!
outside_access_in of access allowed any ip an extended list
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.0.0 10.20.0.0 255.255.0.0
inside_nat0_outbound list of allowed ip extended access all 10.1.1.192 255.255.255.248
outside_cryptomap_dyn_60 list of allowed ip extended access all 10.1.1.192 255.255.255.248
access extensive list ip 10.1.0.0 outside_1_cryptomap allow 255.255.0.0 10.20.0.0 255.255.0.0
pager lines 24
cnf-8-ip 10.1.1.192 mask - 10.1.1.199 IP local pool 255.255.0.0
Global interface 10 (external)
15 1.2.4.5 (outside) global
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 15 10.1.0.0 255.255.0.0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 X.X.138.1 1
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA MD5-ESP-3DES ESP-DES-MD5
life together - the association of security crypto dynamic-map outside_dyn_map 20 28800 seconds
Crypto-map dynamic outside_dyn_map 20 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA
life together - the association of security crypto dynamic-map outside_dyn_map 40 28800 seconds
Crypto-map dynamic outside_dyn_map 40 kilobytes of life together - the association of safety 4608000
Dynamic crypto map outside_dyn_map 60 match address outside_cryptomap_dyn_60
Crypto-map dynamic outside_dyn_map 60 value transform-set ESP-3DES-MD5 ESP-3DES-SHA ESP-DES-MD5 ESP-DES-SHA
life together - the association of security crypto dynamic-map outside_dyn_map 60 28800 seconds
Crypto-map dynamic outside_dyn_map 60 kilobytes of life together - the association of safety 4608000
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-SHA-3DES ESP-MD5-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map 1 match address outside_1_cryptomap
outside_map game 1 card crypto peer X.X.21.29
card crypto outside_map 1 set of transformation-ESP-DES-SHA
outside_map map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map 1 set security-association life kilobytes 4608000
outside_map card crypto 65534 isakmp ipsec dynamic SYSTEM_DEFAULT_CRYPTO_MAP
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP crypto identity hostname
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 1
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 3600
internal GroupPolicy1 group strategy
cnf-vpn-cls group policy internal
attributes of cnf-vpn-cls-group policy
value of 10.1.1.7 WINS server
value of 10.1.1.7 DNS server 10.1.1.205
Protocol-tunnel-VPN IPSec l2tp ipsec
field default value x.com
sean U/h5bFVjXlIDx8BtqPFrQw password user name is nt encrypted
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key secret1
RADIUS-sdi-xauth
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
tunnel-group cnf-vpn-cls type remote access
tunnel-group global cnf-vpn-cls-attributes
cnf-8-ip address pool
Group Policy - by default-cnf-vpn-cls
tunnel-group cnf-CC-vpn-ipsec-attributes
pre-shared-key secret2
ISAKMP ikev1-user authentication no
tunnel-group cnf-vpn-cls ppp-attributes
ms-chap-v2 authentication
tunnel-group X.X.21.29 type ipsec-l2l
IPSec-attributes tunnel-Group X.X.21.29
Pre-shared key SECRET
!
class-map inspection_default
match default-inspection-traffic
!
!
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:9780edb09bc7debe147db1e7d52ec39c
: end
#2: 2811 router config:
!
! Last configuration change to 09:15:32 PST Friday, October 19, 2012 by cnfla
! NVRAM config update at 13:45:03 PST Tuesday, October 16, 2012
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname THE-2800
!
!
Crypto pki trustpoint TP-self-signed-1411740556
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1411740556
revocation checking no
rsakeypair TP-self-signed-1411740556
!
!
TP-self-signed-1411740556 crypto pki certificate chain
certificate self-signed 01
308201A 8 A0030201 02020101 3082023F 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31343131 37343035 6174652D 3536301E 170 3132 31303136 32303435
30335A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 34313137 65642D
34303535 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100F75F F1BDAD9B DE9381FD 7EAF9685 CF15A317 165B 5188 1 B 424825 9C66AA28
C990B2D3 D69A2F0F D745DB0E 2BB4995D 73415AC4 F01B2019 C4BCF9E0 84373199
E599B86C 17DBDCE6 47EBE0E3 8DBC90B2 9B4E217A 87F04BF7 A182501E 24381019
A61D2C05 5404DE88 DA2A1ADC A81B7F65 C318B697 7ED69DF1 2769E4C8 F3449B33
010001A 3 67306530 1 130101 FF040530 030101FF 30120603 0F060355 35AF0203
1104 B 0 300982 074C412D 32383030 551D 551 2304 18301680 14B56EEB 301F0603
88054CCA BB8CF8E8 F44BFE2C B77954E1 52301 D 06 04160414 B56EEB88 03551D0E
054CCABB 8CF8E8F4 4BFE2CB7 7954E152 300 D 0609 2A 864886 F70D0101 04050003
81810056 58755 56 331294F8 BEC4FEBC 54879FF5 0FCC73D4 B964BA7A 07D 20452
E7F40F42 8B 355015 77156C9F AAA45F9F 59CDD27F 89FE7560 F08D953B FC19FD2D
310DA96E A5F3E83B 52D515F8 7B4C99CF 4CECC3F7 1A0D4909 BD08C373 50BB53CC
659 4246 2CB7B79F 43D94D96 586F9103 9B4659B6 5C8DDE4F 7CC5FC68 C4AD197A 4EC322 C
quit smoking
!
!
!
crypto ISAKMP policy 1
preshared authentication
ISAKMP crypto key address SECRET X.X.138.132 No.-xauth
!
!
Crypto ipsec transform-set the-2800-trans-set esp - esp-sha-hmac
!
map 1 la-2800-ipsec policy ipsec-isakmp crypto
ipsec vpn Description policy
defined by peer X.X.138.132
the transform-set the-2800-trans-set value
match address 101
!
!
!
!
!
!
interface FastEthernet0/0
Description WAN side
address IP X.X.216.29 255.255.255.248
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
No mop enabled
card crypto 2800-ipsec-policy
!
interface FastEthernet0/1
Description side LAN
IP 10.20.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly
full duplex
automatic speed
No mop enabled
!
IP nat inside source map route sheep interface FastEthernet0/0 overload
access-list 10 permit X.X.138.132
access-list 99 allow 64.236.96.53
access-list 99 allow 98.82.1.202
access list 101 remark vpn tunnerl acl
Note access-list 101 category SDM_ACL = 4
policy of access list 101 remark tunnel
access-list 101 permit ip 10.20.0.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.20.0.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 permit ip 10.20.0.0 0.0.0.255 any
public RO SNMP-server community
!
!
!
sheep allowed 10 route map
corresponds to the IP 110
!
!
!
!
WebVPN gateway gateway_1
IP address X.X.216.29 port 443
SSL trustpoint TP-self-signed-1411740556
development
!
WebVPN install svc flash:/webvpn/svc.pkg
!
WebVPN gateway-1 context
title 'b '.
secondary-color white
color of the title #CCCC66
text-color black
SSL authentication check all
!
!
policy_1 political group
functions compatible svc
SVC-pool of addresses "WebVPN-Pool."
SVC Dungeon-client-installed
SVC split include 10.20.0.0 255.255.0.0
Group Policy - by default-policy_1
Gateway gateway_1
development
!
!
end
#3: test Pix to the router:
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1
1 peer IKE: X.X.21.29
Type: user role: initiator
Generate a new key: no State: MM_WAIT_MSG2
> DEBUG:
12:07:14 pix535:Oct 22 Oct 22 12:20:28 EDT: % PIX-vpn-3-713902: IP = X.X.21.29, Removing peer to peer table has not, no match22 Oct 12:07:14 pix535: 22 Oct 12:20:28 EDT: % PIX-vpn-4-713903: IP = X.X.21.29, error: cannot delete PeerTblEntry#4: test the router to pix:LA - 2800 #sh crypto isakmp hisIPv4 Crypto ISAKMP Security Associationstatus of DST CBC State conn-id slotX.X.138.132 X.X.216.29 MM_KEY_EXCH 1017 ASSETS 0> debugLA - 2800 #ping 10.1.1.7 source 10.20.1.1Type to abort escape sequence.Send 5, echoes ICMP 100 bytes to 10.1.1.7, time-out is 2 seconds:Packet sent with a source address of 10.20.1.1Oct 22 16:24:33.945: ISAKMP: (0): profile of THE request is (NULL)22 Oct 16:24:33.945: ISAKMP: created a struct peer X.X.138.132, peer port 50022 Oct 16:24:33.945: ISAKMP: new created position = 0x488B25C8 peer_handle = 0 x 8000001322 Oct 16:24:33.945: ISAKMP: lock struct 0x488B25C8, refcount 1 to peer isakmp_initiator22 Oct 16:24:33.945: ISAKMP: 500 local port, remote port 50022 Oct 16:24:33.945: ISAKMP: set new node 0 to QM_IDLE22 Oct 16:24:33.945: ISAKMP: find a dup her to the tree during the isadb_insert his 487720 A 0 = call BVA22 Oct 16:24:33.945: ISAKMP: (0): cannot start aggressive mode, try the main mode.22 Oct 16:24:33.945: ISAKMP: (0): pair found pre-shared key matching 70.169.138.132Oct 22 16:24:33.945: ISAKMP: (0): built of NAT - T of the seller-rfc3947 IDOct 22 16:24:33.945: ISAKMP: (0): built the seller-07 ID NAT - tOct 22 16:24:33.945: ISAKMP: (0): built of NAT - T of the seller-03 IDOct 22 16:24:33.945: ISAKMP: (0): built the seller-02 ID NAT - t22 Oct 16:24:33.945: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM22 Oct 16:24:33.945: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1Oct 22 16:24:33.945: ISAKMP: (0): Beginner Main Mode ExchangeOct 22 16:24:33.945: ISAKMP: (0): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_NO_STATE22 Oct 16:24:33.945: ISAKMP: (0): sending a packet IPv4 IKE.22 Oct 16:24:34.049: ISAKMP (0:0): packet received dport 500 sport Global 500 (I) MM_NO_STATE X.X.138.13222 Oct 16:24:34.049: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH22 Oct 16:24:34.049: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_I_MM2Oct 22 16:24:34.049: ISAKMP: (0): treatment ITS payload. Message ID = 0Oct 22 16:24:34.049: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.049: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123Oct 22 16:24:34.049: ISAKMP: (0): provider ID is NAT - T v2Oct 22 16:24:34.049: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.049: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 19422 Oct 16:24:34.053: ISAKMP: (0): pair found pre-shared key matching 70.169.138.132Oct 22 16:24:34.053: ISAKMP: (0): pre-shared key local found22 Oct 16:24:34.053: ISAKMP: analysis of the profiles for xauth...22 Oct 16:24:34.053: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 122 Oct 16:24:34.053: ISAKMP: DES-CBC encryption22 Oct 16:24:34.053: ISAKMP: SHA hash22 Oct 16:24:34.053: ISAKMP: default group 122 Oct 16:24:34.053: ISAKMP: pre-shared key auth22 Oct 16:24:34.053: ISAKMP: type of life in seconds22 Oct 16:24:34.053: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x8022 Oct 16:24:34.053: ISAKMP: (0): atts are acceptable22 Oct 16:24:34.053: ISAKMP: (0): Acceptable atts: real life: 022 Oct 16:24:34.053: ISAKMP: (0): Acceptable atts:life: 022 Oct 16:24:34.053: ISAKMP: (0): fill atts in his vpi_length:422 Oct 16:24:34.053: ISAKMP: (0): fill atts in his life_in_seconds:8640022 Oct 16:24:34.053: ISAKMP: (0): return real life: 8640022 Oct 16:24:34.053: ISAKMP: (0): timer life Started: 86400.Oct 22 16:24:34.053: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.053: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123Oct 22 16:24:34.053: ISAKMP: (0): provider ID is NAT - T v2Oct 22 16:24:34.053: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.053: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 19422 Oct 16:24:34.053: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE22 Oct 16:24:34.053: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM2Oct 22 16:24:34.057: ISAKMP: (0): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_SA_SETUP22 Oct 16:24:34.057: ISAKMP: (0): sending a packet IPv4 IKE.22 Oct 16:24:34.057: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE22 Oct 16:24:34.057: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM322 Oct 16:24:34.181: ISAKMP (0:0): packet received dport 500 sport Global 500 (I) MM_SA_SETUP X.X.138.13222 Oct 16:24:34.181: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH22 Oct 16:24:34.181: ISAKMP: (0): former State = new State IKE_I_MM3 = IKE_I_MM4Oct 22 16:24:34.181: ISAKMP: (0): processing KE payload. Message ID = 0Oct 22 16:24:34.217: ISAKMP: (0): processing NONCE payload. Message ID = 022 Oct 16:24:34.217: ISAKMP: (0): pre-shared key found peer corresponding to X.X.138.132Oct 22 16:24:34.217: ISAKMP: (1018): load useful vendor id of treatmentOct 22 16:24:34.217: ISAKMP: (1018): provider ID is the unitOct 22 16:24:34.217: ISAKMP: (1018): load useful vendor id of treatmentOct 22 16:24:34.217: ISAKMP: (1018): provider ID seems the unit/DPD but major incompatibility of 55Oct 22 16:24:34.217: ISAKMP: (1018): provider ID is XAUTHOct 22 16:24:34.217: ISAKMP: (1018): load useful vendor id of treatmentOct 22 16:24:34.217: ISAKMP: (1018): addressing another box of IOS!Oct 22 16:24:34.221: ISAKMP: (1018): load useful vendor id of treatment22 Oct 16:24:34.221: ISAKMP: (1018): vendor ID seems the unit/DPD but hash mismatch22 Oct 16:24:34.221: ISAKMP: receives the payload type 2022 Oct 16:24:34.221: ISAKMP: receives the payload type 2022 Oct 16:24:34.221: ISAKMP: (1018): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE22 Oct 16:24:34.221: ISAKMP: (1018): former State = new State IKE_I_MM4 = IKE_I_MM422 Oct 16:24:34.221: ISAKMP: (1018): send initial contact22 Oct 16:24:34.221: ISAKMP: (1018): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication22 Oct 16:24:34.221: ISAKMP (0:1018): payload IDnext payload: 8type: 1address: X.X.216.29Protocol: 17Port: 500Length: 1222 Oct 16:24:34.221: ISAKMP: (1018): the total payload length: 12Oct 22 16:24:34.221: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:24:34.221: ISAKMP: (1018): sending a packet IPv4 IKE.22 Oct 16:24:34.225: ISAKMP: (1018): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE22 Oct 16:24:34.225: ISAKMP: (1018): former State = new State IKE_I_MM4 = IKE_I_MM5...22 Oct 16:24:38.849: ISAKMP: (1017): purge the node 19855474022 Oct 16:24:38.849: ISAKMP: (1017): purge the node 81238000222 Oct 16:24:38.849: ISAKMP: (1017): purge node 773209335...Success rate is 0% (0/5)# THE-2800Oct 22 16:24:44.221: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:24:44.221: ISAKMP (0:1018): increment the count of errors on his, try 1 5: retransmit the phase 1Oct 22 16:24:44.221: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:24:44.221: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:24:44.221: ISAKMP: (1018): sending a packet IPv4 IKE.22 Oct 16:24:44.317: ISAKMP (0:1018): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH X.X.138.132Oct 22 16:24:44.317: ISAKMP: (1018): package of phase 1 is a duplicate of a previous package.Oct 22 16:24:44.321: ISAKMP: (1018): retransmission jumped to the stage 1 (time elapsed since the last transmission 96)22 Oct 16:24:48.849: ISAKMP: (1017): serving SA., his is 469BAD60, delme is 469BAD6022 Oct 16:24:52.313: ISAKMP (0:1018): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH X.X.138.132Oct 22 16:24:52.313: ISAKMP: (1018): package of phase 1 is a duplicate of a previous package.Oct 22 16:24:52.313: ISAKMP: (1018): retransmission due to phase 1 of retransmissionOct 22 16:24:52.813: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:24:52.813: ISAKMP (0:1018): increment the count of errors on his, try 2 of 5: retransmit the phase 1Oct 22 16:24:52.813: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:24:52.813: ISAKMP: (1018): package X.X138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:24:52.813: ISAKMP: (1018): sending a packet IPv4 IKE.Oct 22 16:24:52.913: ISAKMP: (1018): package of phase 1 is a duplicate of a previous package.Oct 22 16:24:52.913: ISAKMP: (1018): retransmission jumped to the stage 1 (time elapsed since the last transmission of 100)22 Oct 16:25:00.905: ISAKMP (0:1018): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH X.X.138.13222 Oct 16:25:00.905: ISAKMP: node set 422447177 to QM_IDLE....22 Oct 16:25:03.941: ISAKMP: (1018): SA is still budding. New application of ipsec in the annex22 Oct 16:25:03.941: ISAKMP: error during the processing of HIS application: failed to initialize SA22 Oct 16:25:03.941: ISAKMP: error while processing message KMI 0, error 2.Oct 22 16:25:12.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:25:12.814: ISAKMP (0:1018): increment the count of errors on his, try 4 out 5: retransmit the phase 1Oct 22 16:25:12.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:25:12.814: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:25:12.814: ISAKMP: (1018): sending a packet IPv4 IKE.Oct 22 16:25:22.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:25:22.814: ISAKMP (0:1018): increment the count of errors on his, try 5 of 5: retransmit the phase 1Oct 22 16:25:22.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:25:22.814: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:25:22.814: ISAKMP: (1018): sending a packet IPv4 IKE.Oct 22 16:25:32.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:25:32.814: ISAKMP: (1018): peer does not paranoid KeepAlive.......22 Oct 16:25:32.814: ISAKMP: (1018): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (post 70.169.138.132)
22 Oct 16:25:32.814: ISAKMP: (1018): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (post 70.169.138.132)
22 Oct 16:25:32.814: ISAKMP: Unlocking counterpart struct 0x488B25C8 for isadb_mark_sa_deleted(), count 0
22 Oct 16:25:32.814: ISAKMP: delete peer node by peer_reap for X.X.138.132: 488B25C8
22 Oct 16:25:32.814: ISAKMP: (1018): error suppression node 1112432180 FALSE reason 'IKE deleted.
22 Oct 16:25:32.814: ISAKMP: (1018): error suppression node 422447177 FALSE reason 'IKE deleted.
22 Oct 16:25:32.814: ISAKMP: (1018): node-278980615 error suppression FALSE reason 'IKE deleted.
22 Oct 16:25:32.814: ISAKMP: (1018): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
22 Oct 16:25:32.814: ISAKMP: (1018): former State = new State IKE_I_MM5 = IKE_DEST_SA
22 Oct 16:26:22.816: ISAKMP: (1018): purge the node 1112432180
22 Oct 16:26:22.816: ISAKMP: (1018): purge the node 422447177
22 Oct 16:26:22.816: ISAKMP: (1018): purge the node-278980615
22 Oct 16:26:32.816: ISAKMP: (1018): serving SA., its A 487720, 0 =, delme = A 487720, 0
The PIX is also used VPN client, such as the VPN Cicso 5.0 client access, works very well. Router is used as a server SSL VPN, too much work
I know there are a lot of data here, I hope that these data may be useful for diagnostic purposes.
All suggestions and tips are greatly appreciated.
Sean
Recommended action:
On the PIX:
no card crypto outside_map 1
!
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
!
card crypto outside_map 10 correspondence address outside_1_cryptomap
crypto outside_map 10 peer X.X.216.29 card game
outside_map crypto 10 card value transform-set ESP-3DES-SHA
life safety association set card crypto outside_map 10 28800 seconds
card crypto outside_map 10 set security-association life kilobytes 4608000
!
tunnel-group X.X.216.29 type ipsec-l2l
IPSec-attributes tunnel-Group X.X.216.29
Pre-shared key SECRET
!
On the router:
crypto ISAKMP policy 10
preshared authentication
Group 2
3des encryption
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
output
!
card 10 la-2800-ipsec policy ipsec-isakmp crypto
ipsec vpn Description policy
defined by peer X.X.138.132
game of transformation-ESP-3DES-SHA
match address 101
!
No crypto card-2800-ipsec-policy 1
Let me know how it goes.
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
-
What is the secret shared key when connecting to a VPN, and where can I find/do.
I'm hosting a VPN server on my windows computer. But when I try of is there to connect, I can't understand what the "secret shared key" what he wants is, and where I can find. I tried for this search in many places. Please tell me where I can find and where I can create. Thank you!
The shared secret is a sort of password. It is defined by the VPN server, then this would be the place to start looking. Personally, I have no experience in running Windows Server VPN service, so I can't be more specific, but I hope that puts you in the right direction.
-
Can I download the Stock Images I paid for to photo sites such as imgur of sharing and so on, so that I declare that copyright law and they are not downloadable etc.? Secondly, can I modify Stock photos, for example the combination two photos, change templates?
Hello
Hope that helps!
Kind regards
Sheena
-
ASA (v9.1) VPN from Site to Site with IKEv2 and certificates CEP/NDE MS
Hi all
I am currently a problem with VPN Site to Site with IKEv2 and certifiactes as an authentication method.
Here is the configuration:
We have three locations with an any to any layer 2 connection. I created each ASA (ASA5510 worm 9.1) to establish one VPN of Site connection to the other for the other two places. Setting this up with pre shared keys and certificates that are signed by the CA MS administrator manually work correctly.
But when we try to enroll these certificates through the Protocol, CEP/NDE his does not work.
Here are my steps:
1 configure the CA Turstpoint to apply to the certification authority
2. request that the CA through the SCEP protocol works fine
3. set up a Trustpoint and a pair of keys for the S2S - VPN connection
4. registration form identity certificate CA via the SCEP Protocol with a one time password works fine
5. set the trustpoint created as for the S2S - VPN IKEv2 authentication method.
Now I did it also for the other site of the VPN Tunnel. But when I ping on a host that is on a different location to make appear the Tunnel VPN - the VPN session is not established. In the debugs I see that there are a few problems during authentication of the remote peer.
On the MS that I see that the certifactes of identity for both ASAs are communicated and not revoked or pending state. The certificate based on the model of the "IPSec (Offline).
When the CA-Admin and a certificate me manually based on a copy of the model of "Domaincontroller" connection is successfully established.
So I would like to know which is the correct certificate for IP-Sec peers template to use for the Protocol, CEP and MS Enterprise CA (its server 2008R2 of Microsoft Enterprise)?
Anyone done this before?
ASA requires that the local and Remote certificate contains EKU IP Security Tunnel Endpoint (1.3.6.1.5.5.7.3.6) (aka IP Security Tunnel termination). You can create a Microsoft CA model to add.
If you absolutely must go with the 'bad' cert, there is a command
ignore-ipsec-keyusage
but it is obsolete and not recommended.
Meanwhile at the IETF:
RFC 4809
3.1.6.3 extended Key use
Extended Key Usage (EKU) indications are not required. The presence
or lack of an EKU MUST NOT cause an implementation to fail an IKE
connection.
-
Family sharing and creation of local Web site/blog
Hello...
I have been looking online and have not found what I'm looking for... Maybe I'm using the wrong terminology in my query. I hope this is something already available and I don't know where to find it on the machine...
We have an iMAC with the recent update.
I want to create a family blog on the iMAC, that would 'feel' like a Web site - where I can post family updates, calendar, news, academic results and achievements, photos, a family journal, recipes, etc... each topic under a different title, which open as tabs in the browser, in order to avoid having to open different applications for this information. But I want all to reside on our family computer. It is accessible directly from the machine at home, nothing online.I am familiar with wordpress.com, but once again, I want to keep this content just us.
I am listed with family sharing and iCloud, Apple has something that does what I'm looking for, but I ask just the wrong question.
Thank you
Penny
No, please read that sharing of the family is in OS X Yosemite: set up the sharing of the family. If you want to set up a blog, you need a blogging app and a place to store. I advise to use Google to research what you need. I found the following article by doing a quick search on Google that you may find useful.
http://www.shoutmeloud.com/5-desktop-blogging-softwares-for-Mac.html
-
VPN site to Site IDLE-UP and no traffic...
Hello
I have two Office (hand and brach) each with a router cisco 887 15.3 with s + ios k9
I have configured the vpn client (works without any problem at all) and a site to site VPN.
The tunnel between main and the site of the direction is up (according to sh cry session and sh crypto isakamp her) but I can't send traffic from one site to another and the condition of the tunnel is still 'IDLE-UP '.
(address removed)
MAIN SITE
Interface: Dialer0
The session state: IDLE-UP
Peer: Port of 500 intellectual PROPERTY branch
Session ID: 0
IKEv1 SA: active local
FLOW IPSEC: allowed ip 10.0.0.0/255.255.255.0 192.168.1.0/255.255.255.0
Active sAs: 0, origin: card cryptoIPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
QM_IDLE 2009 ACTIVEInterface: Dialer0
Tag crypto map: clientmap, local addrprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (10.0.0.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
current_peer port 500
PERMITS, flags = {origin_is_acl, ipsec_sa_request_sent}
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
#send 458, #recv errors 0endpt local crypto. :, remote Start crypto. :
clearly, mtu 1500, path mtu 1500, ip mtu 1500 ip mtu BID Dialer0
current outbound SPI: 0x0 (0)
PFS (Y/N): N, Diffie-Hellman group: noSAS of the esp on arrival:
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
outgoing ah sas:
outgoing CFP sas:
GENERAL MANAGEMENT OF THE
Interface: Dialer0
The session state: IDLE-UP
Peer: HAND IP port 500
Session ID: 0
IKEv1 SA: active local
FLOW IPSEC: allowed ip 10.0.0.0/255.255.255.0 192.168.1.0/255.255.255.0
Active sAs: 0, origin: card cryptoCrypto isakmp HS her
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
QM_IDLE 2012 ASSETSSH crypto ipsec his
Interface: Dialer0
Tag crypto map: clientmap, local addrprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.0.0.0/255.255.255.0/0/0)
current_peer 79.0.238.28 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
#send 30, #recv errors 0endpt local crypto. :, remote Start crypto. :
clearly, mtu 1500, path mtu 1500, ip mtu 1500 ip mtu BID Dialer0
current outbound SPI: 0x0 (0)
PFS (Y/N): N, Diffie-Hellman group: noSAS of the esp on arrival:
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
outgoing ah sas:
outgoing CFP sas:
Set both the sh run CONF.
I see no problem with peer and ACL configuration for nat and trafficThanks for any help.
I'm not for some without seeing a cry of debugging IPsec, but I think you can be matching your dynamic map first with a seq of 10. I would try delete and assigning to 100 or something on both sides. Disable sessions and try again.
No map clientmap 10-isakmp ipsec crypto dynamic dynmap
100 ipsec-isakmp crypto map clientmap Dynamics dynmap
Claire crying its
Disable the IPsec Security Association cry
HTH
-
Dear Experts,
If we have 2 remote sites with the same shared storage, can mount us a drive on remote site?
- Assume that the oracle database is on the shared disk (for example HP 3PAR)
- Primary Oracle server with storage as a common drive (storage shared on sites geographical apart) have all the files database.
- failure, it is possible to mount the drive even at the remote site and mount the database oracle it?
There must be no effect on the as it should the same disk that has dismantled master site.
Thank you and best regards,
IVW
Thanks a lot mseberg
Is it a design valid ?
- We have remote sites and want to set up DR. As we only SE pare data is therefore no choice.
- We think of the SAN replication option.
Have you ever seen / configured such architecture or design?
Can you please throw some light on this. Thanks in advance for your ideas.
Thank you best regards &,.
IVW
-
all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow
One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
You can try to reset (power off / on) of the router.
-
Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire
Try to download from this site:
- Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
-
original title: At & t uverse internet
Use internet AT & T Uverse, their diagnosis happens every time I go online for the first 3 sites until I run their diagnosis, and then traverse the requested Web site. The diagnosis can never find anything. Works great after that. Is something my tracking sites and interrupt my process?Hi Chelsea,
· When you get the run diagnostics?
· Do you get this message in the browser or is it a popup on the computer?
It would probably be best for you to contact uverse support to see why this is happening.
-
Don't understand why can't listen to videos on the web sites ie HULU and ads. Using Vista + Adobe Flash player
Hello
1. what happens when you try to play videos on the mentioned website?
2. you use Internet Explorer browser to play videos on the mentioned website? If so, which version?
3. are you able to play videos on other websites like YouTube, etc?
See the following article: If you use the Internet Explorer browser.
The video problems when you use Internet Explorer:
-
Original title: Weird problem.
My computer says it is connected to the network and the network is connected to the internet, but I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection. I have reset the router and the computer many times and the problem is still there. Any ideas on how to solve this problem?
Very strange that this issue has been raised suddenly and even system restore back the working time is not solve it. At this point, I suspect something mischievous because restoration of return must be a guaranteed fix. If it worked on Friday, it should work if restore you backup on Friday.
I ask you to check if your network card has got an update which could have features broke, but that can't be the problem because the restoration of return would be handed over the old version.
Indeed, using restore in a working time essentially says that this isn't a configuration problem, because configuration is in a known-to-be-working state (because he worked at the restored time).
I would therefore start at this stage, verification of hardware, antenna, connections, equipment devices.
-
I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?
[moved]
I had the same problem 2 weeks while in the Mexico. I contacted the support TWC and the person to whom I spoke said he had to unlock something. When he did, all my mail came in Outlook in the spam folder. It was OK because I got my mail.
I moved to a different House and now have the same problem again. I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage. He has not found anything by the previous call that guided him by setting this time. He said that he would open a ticket and call me in the next 24 to 48 hours.
Is it reminds and solves the problem, I'll post how it was corrected.
Amigos audio!
Maybe you are looking for
-
I am trying to send a rule HPDM task that synchronizes the system clock to an NTP server every day at a specific time. With Scripture filter off it works fine, but with it enabled system restart to commit the filter. I don't want to restart (I'm fine
-
Notification Server 2008 R2 errors
There is always 2 errors appearing in the dashboard from the server. The first is the typical 'surveillance computer error' which, after having applied the Hot MS difficulty is still there, the second is an error message indicating a PC Backup throug
-
How to print a calendar and task bar on Windows Vista
My calendar prints well but cannot print my task
-
When I turn my computer I geet an error message "bgedit.exe". How can I fix it?
When I turn on Mycomputer, I get an "error bgedit.exe message and a white screen." How do I fox this?
-
Not active blackBerry Smartphones browser
Well, the title says barely enough. So I'll just paste what I send to Telstra. -------- I recently bought a blackberry bold 9000 flea market. He is originally a telstra device (it is covered with logos of Telstra and started there the telstra boot sc