Cannot select the attribute client network Orchestrator

Similar Questions

• Cannot select the drive (NAS) on Windows Media Center

  Original title: cannot select the drive (NAS)

  My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet.  The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC.  In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option.  What can I do to get the WMC to see the SIN?  Is there another setting of mapping I should use?

  Also, as a side note, there is no option to change the quality of the recording at all.  Installer below.  If any other information is needed, let me know.

  ASRock m - itx E-350 APU/MB
  Kingston SSD now V series SSD 30gig
  Western Digital My Book Live 2 TB
  Cisco/Linksys E2000 Wireless N Router
  PCTV usb TV Tuner (HD capable) with on the HDTV antenna
  Win7 Premium

  Record TV directly to a network location is not supported.

  You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195

• Cannot select the device scanner, AIO F380, MacBook Pro

  Cannot select the device scanner, AIO F380, MacBook Pro

  Thank you, Sean. I found out what I needed to know to fix the DIF from a document from hp customer service. I was able to fix by restarting, it is to unplug the usb cable first from the printer, wait 5 seconds, plug the cable back in. Then I desconnected the cable from the computer, wait 5 seconds and plugged.

  Duh!

  Thanks for responding.

• Cannot select the Dictionary view user USER_TAB_COMMENT?

  Hello.
  
  I have this weird problem in 11.2.0.3
  
  I cannot select the view of the USER_TAB_COMMENT of a user dictionary, but others can.
  If I try to describe it, I get ORA-00942 and ORA-04043 messages.
  
  Here is my attempt. I create a comment on a table, try desc or select the view from the dictionary. Then connect with SYS and select the comment in the view "dba" to check if the comment was created:

  SQL> conn RODOLFO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "RODOLFO"
  SQL> comment on table DOCUMENTILLOS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments;
  select table_name, comments from user_tab_comments
                                   *
  ERROR en línea 1:
  ORA-00942: la tabla o vista no existe
  
  SQL> desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> desc all_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> conn / as sysdba
  Conectado.
  SQL> show user
  USER es "SYS"
  SQL> select owner, table_name, comments from dba_tab_comments
    2  where owner = 'RODOLFO' and table_name = 'DOCUMENTILLOS'
    3  ;
  
  OWNER                          TABLE_NAME
  ------------------------------ ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  RODOLFO                       DOCUMENTILLOS
  This is a comment
  
  
  SQL>

  Other users, I don't have this problem

  SQL> conn MANOLO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "MANOLO"
  SQL> comment on table DOCS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments where table_name = 'DOCS';
  
  TABLE_NAME
  ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  DOCS
  This is a comment

  Clues why this is happening?
  
  Kind regards.

  elvegaa_esp wrote:
  What do you think?

  OK, the question is in the place where he is not pointing?

  Edit:
  Oh, it looks that it points to dba_tab_comments. Since your original post:

  desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  

  Who do not have the right of Rodolfo.

  Thus, final to get rid of him.

  And a good thing that you do not 'go to your DBA"as suggested. It was just to choose the wrong solution to an unknown problem.

  Concerning
  Peter

  Published by: Peter on March 11, 2013 08:49

• Cannot complete the operation of network against My Oracle Support

  The weirdest thing that happens to me, new installation of 12 c, with the correctly filled out proxy settings, with proxy test works successfully, with the CCR download at MOS, I am not able to connect to console 'EM MOS, reception:
  
  Cannot complete the operation of network against My Oracle Support. Please check the network connectivity to the Oracle Support Site.
  
  eMoms.log is filled:
  
  + 2012-07-18 11:30:13, 537 [EMUI_11_30_13_/console/mos/signin] ERROR handlers. SigninHandler logp.251 - SigninHandler0: impossible to establish a proxy connection: 407 Proxy authentication required.
  oracle.sysman.emmos.common.exception.EMMOSException: 0: could not establish a proxy connection: 407 Proxy authentication required
  
  Seems half of 'EM is aware of proxy setting and the other half is not.
  I open SR but the named person will be able to help me because apparently, he doesn't understand a thing I want to talk. I hope that I will find someone who is willing to help out here.

  Can you use the same domain in proxy page you found in the trace: "Infrastructure to browse" & give it a try.

• Cannot ping the Anyconnect client IP address to LAN

  Hi guys,.

  I have an old ASA5520 running 9.1 (6) 8 where I installed Anyconnect SSL split tunneling access:

  See establishing group policy enforcement
  attributes of Group Policy DfltGrpPolicy
  VPN-tunnel-Protocol ikev1, ikev2 clientless ssl

  lanwan-gp group policy internal
  gp-lanwan group policy attributes
  WINS server no
  DNS server no
  VPN - connections 1
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value lanwan-acl
  by default no
  WebVPN
  AnyConnect value lanwan-profile user type profiles

  permit for line lanwan-acl access-list 1 standard 172.16.0.0 255.254.0.0 (hitcnt = 48) 0xb5bbee32

  Now I can ping, RDP, etc. of any VPN host connected to any destination within 172.16.0.0 255.254.0.0 range.

  Here is my routing information:

  See the road race
  Route outside 0.0.0.0 0.0.0.0 69.77.43.1 1
  Route inside 172.16.0.0 255.254.0.0 172.25.8.1 1

  interface GigabitEthernet0/1
  nameif inside
  security-level 100
  IP 172.25.8.4 255.255.254.0

  But I can't ping any Anyconnect VPN client connected from my LAN.

  See the establishment of performance ip local pool

  mask IP local pool lanwan-pool 172.25.9.8 - 172.25.9.15 255.255.254.0

  Here's the traceroute of LAN:

  C:\Users\Florin>tracert d 172.25.9.10

  Determination of the route to 172.25.9.10 with a maximum of 30 hops

  1 1 ms<1 ms="" 1="" ms="">
  2<1 ms="" *=""><1 ms="">
  3 * the request exceeded.
  4 * request timed out.

  While the ASA routing table has good info:

  show route | I have 69.77.43.1

  S 172.25.9.10 255.255.255.255 [1/0] via 69.77.43.1, outdoors

  Other things to mention:

  -There is no other FW between LAN and the ASA

  -There is no FW or NAT configured or enabled on this ASA(see her running nat and see the race group-access they return all two virgins).

  -FW Windows on the Anyconnect workstation is disabled (the service is running). I also tested and able to ping to my workstation Anyconnect House of another device on the same network.

  So, I'm left with two questions:

  1. first a I do not understand: after reading some threads here, I added this line standard lanwan-acl access-list allowed 69.77.43.0 255.255.255.0

  out of ping and tracert commands remains the same, but now I can RDP to the docking station VPN connected to any workstation LAN;

  What happens here?

  2. how can I do ICMP work after all? I also tried fixup protocol icmp and icmp Protocol Error Correction, still no luck

  Thanks in advance,

  Florin.

  Hi Florin,

  The entire production is clear enough for me

  in debugging, you can see that traffic is constituent of the ASA

  "Inside ICMP echo request: 172.17.35.71 outside: 172.25.9.9 ID = 22 seq = 14024 len = 32.

  the SAA can be transferred on or can be a downfall for some reason unknow

  can we have a wireshark capture on the vpn client to see if the icmp request is to reach the customer? I want to just isolate the problem of fw so that we can concentrate on the ASA rather than silly windows ;) fw

  made the RDP Protocol for VPN client for you inside the LAN work?

  run logging on ASA and ping and then inside to VPN client and the Coachman connects on the firewall, if ASA comes down the pkt it will appear in the log.

  loggon en
  debug logging in buffered memory

  #sh logging buffere | in icmp

  #Rohan

• cannot change the process unique network released (cleared)

  I have software running on a fieldpoint which normally runs standalone but I need to run a simulator to debugging on a windows computer. The RT software uses several shared single process variables that are deployed to the target. In order to launch the simulator that accesses screw has also deployed to the target, I also access these variables on the windows machine (but only during the simulation).

  I thought I could do this simply by changing the shared variables 'unique process', "network broadcast" through their properties dialog. However, when I access those variables, the network published option is grayed out. Does anyone know why this is? I prefer not having to recreate these variables from scratch, they are connected in several places in the application.

  I have included the library file that contains these variables, in case anyone knows anything I put in it that prevents the change to the published network.

  Hi Kgolden

  The reason that you are not able to select the network has published is because the refnum of queue is not a data type that can be sent via a published network shared variable.

• Cannot get the DHCP client service to start automatically

  I work on a computer that has been recently infected with a fake AV protection virus.  The user has removed the virus using Microsoft Essentials and Malwarebytes.  Subsequently, they were unable to connect to a network with wired network cards or wireless.

  The afd.sys file has been deleted and couldn't start the DHCP client.  As soon as I restored the AFD, I was able to manually start the DHCP client.  At this point, I was able to connect to the network and get on the internet.

  The problem is that I restarted the computer and saved in Windows, the DHCP client is not automatically start as it should by the setting.  I can still go and start it manually, but it does not start by itself.

  I tried to use Winsock fix, the different netsh commands, / flushdns and enough & renew, tdsskiller and a number other programs I have come across.

  Computer is running Windows XP Service Pack 3

  Microsoft Essentials, Malwarebyes, Superantispyware and CCleaner are all installed.

  Any ideas on how to get this to start running automatically without having to do a reinstall of Windows XP?

  Thank you.

  an error saying there is no hard drive installed.

  This may mean that you have a SATA drive.  If so, you have to activate something like "legacy mode" in the BIOS before you can use the XP CD to do a reinstall (unless you have a floppy drive to add SATA drivers or integrate a CD with SATA drivers).

• ISE 1.3.0.876 - cannot delete the Group of network devices

  Hello

  When I try to delete a NDG I tells me "this node cannot remove because it contains devices or subgroups.

  When I search in the peripheral topic network no devices are part of the group, and it has no sub-groups in this group.

  So what don't understand me?

  Brian

  Hi Brian,.

  If you have checked everything regarding the configuration and we are still not able to remove the NDG group.

  In this scenario, that the problem is although the n group is not referenced for an any Nagels when we try to delete the n group, it will throw an error "this node cannot remove because it contains devices or subgroups.

  The reason for this problem is that previously when n use this group of n, and if we reference out of this group of n, "dereferenced" information only are not updated in the database table and thus causing the issue when deleting GUI. He still thinks as if it has references.

  You may need to open a TAC case for this because it will be access to the SQL DB of the ISE and you don't have access to him.

  Kind regards

  Aditya

• ACS v5.2 - cannot add the attribute enumeration to aggravate the condition

  Hello

  I created an internal user attribute and the attribute enumeration type so that only certain values can be selected. I am trying to apply this attribute to a composed State. However, when I select the value of the enumerator of the compound State none of the configured values display in the window pop up. (It is easier to explain with screenshots.). Is there a way to do this? Any advice would be appreciated.

  Thank you very much

  Dave

  

  

  I've recreated your problem both in ie and firefox. I tried to remove the spaces from the listed strings, but it did not help

  Note that the enuemrated conditions work for simple conditions. It's when customize you the table you select CAR as a condition; instead of using a compound conditon.

  I found a CDETS for this question:

  CSCtg51846: Enum values do not appear in generally compound conditions

• Cannot call the Jabber Client customer Movi

  Hi team,

  We cannot call Jabber Client customer Movi using client SIP URI of Movi.

  Here is the photo of the back-end infrastructure: -.

  CUCM: 8.6.2

  VCS: X7.2

  TMS: 13.2.1

  CUPS: N/A

  The Jabber Clients are sized CUCM and CUPS. MOVI Clients are provisioned on the TMS and VCS.

  I've referred a case of TAC and TAC engineer informed that dialing SIP URI is not supported Jabber client on CUCM 8.6.2 Movi

  Could someone provide me with the Bug ID or valid document that says. ?

  Thank you

  Saurabh

  Slim,

  I'll send you the link Monday

  Thnx

  Alok

• trying to downlad but 12 items cannot select the language

  I try to download 12 items but cannot select language.on page where you choose the version, it asks of prefference language but the language button does not work. I'm trying to move items to a new computer. (windows)

  Download Photoshop Elements products | 10, 11, 12, 13

  There are a group of languages in the upper left block and the 2 files in the right column to download for Windows in these languages, and a group of languages in the lower left for Mac and a single file to download in the Central column for all these languages.

  Guinot

• Cannot create the vDC Org network

  I am trying to create a network isolated for an organization, and I see the following on the creation error message:

  "Cannot deploy the network organization VDC (e90bc014-47f4-43dd-80dc-299228383388).
  com.vmware.ssdc.util.LMException: portgroup dvs DV. VCDVSInternal-5b323cfb-abbb-4185-95f0-744417f418fc is not found in the inventory after creation.

  Can someone advise on the problem?

  Thank you
  Alex

  This probably means that the vcenter proxy does not work. In the system, manage & monitor, go to the page of cells and see if the vcenter proxy is running on any cell

• Cannot select the text to change

  I inherited a document and I can't change the text on a page. I tried the different layers but cannot select same text.

  I use CC 2014.0

  Brian

  Is the text on the master?

  It is on a locked layer?

  The text block is locked?

  Something is above the text frame?

• cannot select the disk to install the update of the Sierra (Macbook Pro 13 inch, late 2011)

  I downloaded the update of the Sierra and proceeded with the installation. However, I noticed that even if I could move the pointer autour, I couldn't make selections on tapping the trackpad. I managed to get past the first steps by using the 'tab' key (keyboard) to make selections and 'space' to make the confirmations. However, arriving at step 'select the disk where you want to install Mac OS', the 'Tab' and 'Space' technical has stopped working. Now I'm stuck here. Can someone tell me please how to go beyond this?

  Looks like it's a problem of trackpad? Or in any case a trackpad issue connected with installation of Sierra? I would take the MBP for a Genius Bar...