Vs Display VGA Port

Similar Questions

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• How to connect my 23 "Cinema HD (DVI - D) to a VGA port?

  I have a 23 "Cinema display HD display (2008) I'm trying to connect to a VGA port. According to my research, it seems that VGA and DVI - D are compatible, but I can't make it work. When I cycle the power on the computer as well display cycles, but I cannot get any video. I guess there is a problem with the adapter, and hoping that someone can recommend one that works?

  A simple adapter won't work, you need a VGA to DVI converter, such as:

  http://www.MonoPrice.com/product?C_ID=101 & cp_id = 10114 & cs_id = 1011401 & P_ID = 8214 & have q = 1 & format = 2

  Make sure that the VGA port is capable of 1920 X 1200 60 Hz.

• How to connect Portege M700 to TV using the VGA port?

  I bought a VGA S-video/audio adapter and connected my VGA port and the TV.
  Nothing happened.

  In the control panel... no other display/external display was detected.
  Validations only that I ran using an emulator port or something.
  I have the Portege M700 preinstalled with Vista Business lozenges.

  Any ideas would be welcome.
  Thank you

  Hello!

  I have a Portege M700 too and there is no S-video port.

  If you want to switch between the following views the use of FN + F5 as Feliks said. I use the Portege M700 with an external monitor via a VGA cable and it works perfectly.

  Good bye

• Satellite U300 - 13 M - port external monitor (VGA port) does not work

  Dear users of Forums from Toshiba,

  I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.

  Please help me.

  Best regards, Elbrus

  Hello

  I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
  Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.

  Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
  The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.

  You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.

  Check it out please and post the results.

• How can I connect another monitor to compaq SG3 because there is only 1 VGA port and no HDMI.

  How can I connect another monitor to compaq SG3 series because there is only 1 VGA port at the back and there is no HDMI port.  The operating system is Windows 7. I think to buy vga splitter, I don't know if that will allow me to move images/data between the monitors. Please tell us what to do. Thank you

  It is based on the expected results.  A VGA splitter will give you two monitors but they will display the same image.  If the expected result is two different pictures, maybe something like this will do;

  http://www.Amazon.com/IOGEAR-external-video-card-GUC2015V/DP/B000NJFJJK

  or

  http://www.Amazon.com/STARTech-com-external-video-monitor-adapter/DP/B005G306I2/ref=pd_cp_e_0

  Some will also do DVI: http://www.amazon.com/Plugable-Multiple-2048x1152-1920x1200-DisplayLink/dp/B0038P1TP4/ref=sr_1_1?s=electronics & ie = UTF8 & qid = 1345919878 & sr = 1-1 & keywords = usb + to + DVI

• How can I connect mac pro to a projector VGA port

  How can I connect my mac pro book to a projector with a VGA port

  should be pretty simple.  Acorrding to Apple, you have a Thunderbolt port video that supports MiniDisplayPort, so you would need a MiniDP to VGA, then a VGA cable, and then turn on the mirror in the display preferences, under the Big Apple icon at the top left of your screen, then go to System Preferences and there you go.

  John B

• Lack of Aspire V5 573g VGA port?

  You just bought a new V5 Aspire (ACER ASPIRE V5 - 573 G-54208G50AII). On the card it says that this computer has a standard VGA (D - sub), that I took to mean a plug 15 blue pins. I am misstaken? Instead, it has a port that it looks like a mini display port. The specifications are incorrect or if I should have a VGA port?

  Hello...

• CQ62-410US stuck with "Several monitor - Clone View" and VGA port does not

  Hello!

  I have a Compaq CQ62-410US computer laptop with an Intel GMA 4500 M (onboard) video card and a port output VGA, Windows 7 x 64 operating system. A few weeks back the screen was broken (kick straight punch of a child) and nothing could be transmitted via the VGA output either, but the laptop booted and I could hear the sound of Windows 7 logon. I never checked before the VGA output port.
  Yesterday, I replaced the screen broke up with and identical. The fine (full-screen) display in case of back work (boot from USB Flash and the sea + test images), but in Windows 7, two vertical black stripes appeared on the sides because lower than the native resolution. The resolution can be changed at native 1366 x 768 "Screen resolution" because the display is set by default to "Multiple monitors" (I have no other monitor connected, only the built-in screen) and "display of Clone. The built-in display is set as secondary and 'Generic non - PnP' is defined as primary. Any attempt to set the integrated display as primary function or to change the mode "display single" / "Extend view" leads to a black screen with the backlight always on, no matter where I change the settings - in the 'screen Resolution' or 'Graphic properties' (from driver Intel). In the 'Screen Resolution' window the pictogram of the screens show a single screen split in two, and when I press the button "Identify" it shows on the screen ' 1 | 2 ", as you left half of the screen is the main display and half right is the secondary display.
  I put a Philips monitor to the VGA port, Windows detects and installs the appropriate driver, but there is no picture any of mode I put - Clone, Extend, unique display - monitor.
  I tested 3 view of the site of Compaq drivers for my device and the GMA 4500 M drivers from Intel, but the problem is the same (with the drivers from the site intel, on I get only black screen with backlighting.) Pilots are unstable, sometimes at the opening session, page is only a black screen (but before the windows loading screen appear very well) that cannot be changed by "Fn + F4" / "F4" (change view) but a black with the backlight is turned off.
  Due to the replacement of the hard disk, I can't use restore of the operating system that is installed at the factory.
  Please advise me how to solve the display problem and enable the port VGA (get the image on the external monitor).
  Thank you in advance.
  SSM there is not output through the VGA input even at the BIOS screen (no material or to issue independent of the operating system support?).

  I have attached a screenshot.

  Update: I started a live Knoppix CD, and I don't find any problem - unique in 1366 x 768 display configuration; I could even play a game in 3D (OpenGL). While hanging from one monitor to the VGA port, it was found, but when trying to print image to it the OS hung. I guess it's a hardware problem, something to do with the video controller.

  

  I thought about it, it's the GPU, I think that some of the contacts are damaged. Today even in the BIOS screen I see in the middle of the screen a vertical thin purple line which was bounded two screens on a single screen, and all now have a purple tint.

  I had a quick glance at the GPU and surprise - it is glued to the motherboard, no sleeve, no welding. The motherboard chipset is also stuck.

  See the attached images.

  Thank you for the excellent support. I will never buy anything with Compaq logo on it.

• TV Toshiba 43SH9UM - no picture but audio using the VGA port

  Hello

  I have a 43SH9UM projection TV.
  But now that I model in research on the Internet don't could not find anything on this TV!

  Please let me user guide to download (I would lose it!)

  I have problems with this TV!
  When I take my laptop with VGA port to connect to a TV, I do not see any image!
  Connect the audio, but I can hear it.

  Thank you

  _Another wire we Forum_
  http://forums.Toshiba.com/T5/televisions/43SH9UM/TD-p/599054

  + Hi +.

  + Thanks for your response. But I think that you're wrong! +

  + Vga port to connect my laptop to my TV, but only at a resolution of 600 x 480 image I saw on TV (480i), but when I change the resolution to a black screen on my TV show. +
  + Who does not automatically go to 1080i. +
  + While this TV supports this resolution! +

  + How can I get my TV in 1080i resolution? +

  + You have the user manual? +

  Thank you

  When you connect the laptop to the TV, the first thing you need to do is to allow certain port on your TV.
  When the VGA port is combination of keys specific use of TV from laptop desk to the external device.

  I don't know what laptop do you have but on most computers Toshiba laptop is FN + F5 key combination. Of course it won't work if the external device is recognized properly.
  Somehow, I think that your TV is not recognized correctly.

  Can you see options to toggle between your laptop and the TV on your laptop?

• Satellite C850 - how to prevent breaking easily the VGA port

  Hello

  Our school has recently made 20 portable Toshiba L850 and computers C850. As most of the staff allows to connect to his projector VGA port, VGA The port must be strong.

  In recent days, we have 3 laptops with the Port VGA brought away from the laptop! just one thumb on the cable when connected breaks this port, and we cannot get a Toshiba repair, because it's our fault. Fixing this problem will cost us an entirely new Mobo that will most likely cost to buy a new laptop.

  All solutions on how we can prevent the VGA port to stop so easily? There are no screws to screw the VGA port, unlike all of our older laptops that do not break and lasted much longer than 7 days...

  It is not easy to write something about it, except to say when you remove or disconnect VGA cable do slowly, gently and may move slightly left/right.
  I put t know if this is a design flaw. I think that everything is tested until it goes to production.

• Satellite Pro A300 - 1 GR - VGA ports with TV-out function?

  Hello

  Can someone tell me if the VGA port on my Satellite Pro A300-1 (Mobile Intel GMA 4500MHD) is equipped with TV-out function?

  If a single cable is needed to connect with TV's S-video input while a TV-out function is not available, then a relatively expensive converter is necessary?

  Any help will be greatly appreciated.

  Have you checked the user manual?
  What is the manual says?

• missing vga port

  I have HP Pavilion p077TX-15 Notebook lapptop and I found that there was not then, how can I connect to a projector vga port?

  Thanks, it helped!

• HP Pavilion Tower 550-188na: does the trick for Pavilion HP 550-188na AMD A8, have a VGA port to connect to the VGA monitor

  Hello

  I just ordered a HP pavillion 550-188na desktop computer that will be delivered in a few days... QUESTION...

  This office has a VGA port?

  I need to know that I have a VGA screen and am not sure if I will have an appropriate or not.

  Help would be very appreciated.

  Congos, welcome to the forum.

  Yes, it has a VGA port in back i/o ports.  Here is the Specifications of the motherboard of the computer page:

  Figure: Orchid2-S i/o ports

  1. USB 2.0: 4

• Monitors VGA port broke on my hp Pavilion s7700n slimline

  I have a hp Pavilion slimline s7700n, Windows Vista, how do I fix the broken VGA output port

  If it's the motherboard installed: http://support.hp.com/us-en/document/c00783691

  There is not much to do, since there is not a video card slot.  According to all that is 'burst VGA port?  Please explain why or how things are at this point.