VS2010 and MFC herit support compilation error

Similar Questions

• I'm trying to generate a chm on the net and I get a compilation error message

  Hi all

  I am trying to generate chm over the net, and the project even when I'm generating the same chm locally works fine, but when I try to generate the same chm on a network location, it gives me a compilation error and give up the generation. It is also to keep the chm open subsequently file, so I have to reboot the machine.

  It is working on a Windows XP Pro 32-bit RH7.

  Thank you

  It is not a question of project. RoboHelp is simply not designed to work this way, but like many things, some people can use them out of what they were designed for. However, just because some people can work this way, it follows not everyone can.

  I've seen people with projects on a network, and they say they have been doing it for years, it must be OK. A while later, they come back and say that the problem is solved since arriving it locally.

  Sorry, but it seems that you're stuck with working like you do or get your colleague to do so. It could be as simple as it is a bit different from your network.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• LabVIEW FPGA CLIP node compilation error

  Hello NO,.

  I work on an application for my Single-Board RIO (sbRIO-9601) and faced with a compile error when I try to compile my FPGA personality via the ELEMENT node.  I have two .vhd files that I declare in my .xml file and all at this point works great.  I add the IP-level component to my project and then drag it to the VI I created under my FPGA.

  Within the FPGA personality, I essentially have to add some constants on the indicators and entries CLIP to my CLIP out and attempt to save/compile.  With this simple configuration, I met a compilation error (ERROR: MapLib:820 - symbol LUT4... see report filling for details on which signals were cut).  If I go back to my VI and delete indicators on the output (making the output pin of the CLIP connected to nothing), compiles fine.

  I've included screenshots, VHDL and LV project files.  What could be causing an indicator of the output of my VI to force compilation errors?

  Otherwise that it is attached to the output ELEMENT, a successful compilation...

  

  After that the output indicator comes with CLIP, compilation to fail...

  

  NEITHER sbRIO-9601
  LabVIEW 8.6.0
  LabVIEW FPGA
  Windows XP (32-bit, English)
  No conflicting background process (not Google desktop, etc.).

  Usually a "trimming" error gives to think that there are a few missing IP.  Often, a CLIP source file is missing or the path specified in the XML file is incorrect.

  In your case I believe that there is an error in the XML declaration:

  
    1.0
    RandomNumberGenerator
   
      urng_n11213_w36dp_t4_p89.vhd
      fifo2.vhd
   

  This indicates LV FPGA to expect a higher level entity called "RandomNumberGenerator" defined in one of two VHDL files.  However, I couldn't see this entity in one of two files.  If urng_n11213_w36dp_t4_p89 is the top-level entity, edit the XML to instead set the HDLName tag as follows:

  urng_n11213_w36dp_t4_p89

  Also - in your XML, you set the 'oBits' music VIDEO for output as a U32, however the VHDL port is defined as a vector of bits 89:

  oBits: out std_logic_vector (89-1 downto 0)

  These definitions must match and the maximum size of the vector CLIP IO is 32, so you have to break your oBits in three exits U32 output.  I have added the ports and changed your logic of assignment as follows:

  oBits1(31 downto 0)<= srcs(31="" downto="">
  oBits2(31 downto 0)<= srcs(63="" downto="">
  oBits3(31 downto 0)<= "0000000"="" &="" srcs(88="" downto="">

  Both of these changes resulted in a successful compilation.

  Note: The only compiler errors when you add the flag because otherwise your CUTTING code is optimized design.  If the IP is instantiated in a design, but nothing is connected to its output, it consumes all logic?  Most of the time the FPGA compiler is smart enough to get it out.

• I click on start and go to help and Support application, but a pop-up appears «Microsoft compilation error code 800A03EE, can be used to help and support...» Help

  "When I open start and click Help and support, it opens the page, but when I click on one of the options, as the information systems, troubleshooting or Ant other option a square small pop-up appears with the following message" Windows Script Host

  Script: C:\windows\help\oem\scripts\Launch.jse

  Online: 1845

  Char: 3

  Error: Expected ') '

  Code: 800A03EE

  Sourse: Microsoft JScript Compilation error

  For this reason pop until I can't use the help and support that came with the HP Pavilion notebook PC

  HOW THIS CAN BE SOLVED? Help please

  Will search for your answer

  Hi Petey61,

  ·         Did you do changes on the computer before the show?

  ·         Why you try to open the help and support?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

   

  Step 1: Create a new user account.

  Follow the link below to create a new user account and check if the problem persists.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved, the fix for the damaged user account.

  Step 2: Difficulty of damaged user account.

  Follow the steps in the below link to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  It will be useful.

• LV 2011 (and 2012 LV) compilation error. Size not valid in _InstSize: 21

  I created a Subvi in LV8.5 to manage events UI outside a main vi. The Subvi gets control references who are registered for the events, through a queue that all actions are sent to a consumer case, nothing complicated. Everything works fine in LV8.5, but now I got all LV2011SP1 on a Windows 7 64 bit and I still get the same error:

  "Compile error. Report this issue to National Instruments Tech Support. Invalid size in _InstSize 21 "

  which appears 3 times. I tried to open the same code also in LV2012, same error... When you try to isolate the problem, I discovered that by disabling the code in 3 cases of greater consumption that I can get rid of the warning, but then I can't reduce the problem to one...

  Any ideas?

  Yes, the thing to put 'problem' labview code into a Subvi its own helped me as well.

  My speculation is that it forces the choice of another compiler (without the bug) path when compiling the source of the LV.

  I think you should file a bug report using the pages of http://ni.com/support .

  In this way we will have better tools in the future.

  BR,

  / Roger

• Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

  When recording / runing a vi that performs calculations in a node formula containing several if and a switch statement. (LV6.1, WinNT)

  I solved the problem: the compile error occurred because a single formula node entry was an enum.
  When you insert a cast to digital, the problem has been resolved.

• Acrobat and Word compilation error alert: linkCreation.dotm

  

  I've been getting (and ignorant) this alert in Word 2016 and finally google it. It seems to be linked to additional Adobe with the file name linkCreation.dotm which was installed with Acrobat DC. This Microsoft Web site recommends the deletion of linkCreation.dotm. Until I delete it, I would like to learn more about this file.

  den-module-link-using-Word-for/11c6764c-A527-4db1-ad35-08154331efac http://Answers.Microsoft.com/en-US/Mac/Forum/macofficeinsider-MacWord/compile-Error-in-HID

  Here are my questions about linkCreation.dotm

  • What is its purpose

  • Why Adobe it add

  • what Adobe thinks it would do for me

  • will cause problems in Acrobat DC if I delete it in the Microsoft system files

  If I have to choose between Acrobat and Word succeeds, guess who wins...

  My card, because someone will ask you:

  

  Jane

  ACI, ACP

  This problem is due to running 64-bit Version of Office with this add-in that is compatible with 32-bit. Adobe is aware and have released a patch you can download Word to problems of conversion to PDF with Acrobat and Mac Word 2016 version 15.23.2 or later https://helpx.adobe.com/acrobat/kb/word-to-PDF-conversion-problems-mac-word-2016.html

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• Cannot install the update for Photoshop 9. Get error and says contact support. IT IS THERE NO SUPPORT ADOBE! Just that.

  I am very disappointed in what we call 'support Adobe.' There is no online, phone number, e-mail chat for live support. They expect you to go to the 'Community' and hope that someone asked the same question. Stinks.

  When I boot it says that there is an update to Photoshop Elements 9. Whenever I'm trying to install it there is an error and it says it can not be installed and contact technical support. WHAT SUPPORT?

  Hi georgenel53170063,

  Please try to download the updates directly from the links below:

  Adobe Photoshop Elements: For Windows

  Adobe Photoshop Elements: For Macintosh

  Let us know if that helps.

• I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:

  ' I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:

  
  

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.0.0.88

  Application timestamp: 55681d 39

  The default module name: StackHash_76b2

  The default module version: 0.0.0.0

  The default module timestamp: 00000000

  Exception code: c0000005

  Exception offset: 0000000000000006

  The system version: 6.1.7601.2.1.0.768.3

  Locale identifier: 3084

  Information extra No. 1: 76 b 2

  Information extra No. 2: 76b2e5a7b24373bbe6f47563f13e47b1

  Information extra No. 3: 51ff

  Information extra No. 4: 51ff68a42cf4d2164e10e22e1f794f34

  
  

  Hi Oscar,.

  Please see the thread below:

  Photoshop CC 2015 crashing?

  You can also check: 2015 release of Photoshop CC: FAQ

  Kind regards

  Sheena

• OSMF 2.0, Flash Builder 4 and Flex SDK 4.6 of compile errors

  So I have and you try to compile a new StrobeMediaPlayer.swf file of the StobeMediaPlayer.as and associated libraries.  I'm getting the following error when I perform an export-> Release Build:

  Met with errors or warnings during the generation of project StrobeMediaPlayback.as

  MulticastNetLoader.as: The definition of base class MulticastNetLoader is not found.

  MulticastNetLoader.as: Overide marked method must override another method.

  VideoInfoOverlay.as: Type was not found or was not a compilation constant: VideoSurface.

  VideoInfoOverlay.as: Access of undefined property OSMFSettings.

  VideoInfoOverlay.as: Access of undefined property VideoSurface.

  VideoInfoOverlay.as: Type was not found or was not a compilation constant: VideoSurfaceInfo.

  VideoInfoOverlay.as: Access of netGroup property possibly undefined via a reference with org.osmf .net: static type NetStreamLoadTrait.

  VideoInfoOverlay.as: Definition org.osmf.media.videoClasses:VideoSurface could not be found.

  VideoInfoOverlay.as: Definition org.osmf.media.videoClasses:VideoSurfaceInfo could not be found.

  VideoInfoOverlay.as: Definition org.osmf.utils:OSMFSettings could not be found.

  StrobeMediaPlayer.as: Access of undefined property isDVRRecording.

  If someone has encountered this.  I know that OSMF 2.0 was recently released.  I could go back to 1.6, but some ABR features are very attractive.

  Hello

  OSMF 2.0 has a CFC included in download to http://sourceforge.net/projects/osmf.adobe/files/OSMF%202.0%20Release%20%28final%20source% 2C%20ASDocs%2C%20pdf%20guides%20and%20release%20notes%29/OSMF.swc/download files - you can use it.

  Please also replace the OSMF1_6_FP10.swc - or do not use this old SWC.

  S.

• Alienware Windows 8.1 support wire [Questions and Discussions here]

  What's new in point 8.1 of Windows?
  Link

  How to boot to the desktop Windows 8.1
  Link

  How to perform a cleanup / update of Windows Setup 8.1
  Link

  Check list before Windows 8.1 update
  Link

  The product Windows Alienware 8.1 update
  Link

  Computer Dell upgrade of Windows 8 support
  Link

  How to Setup multiple monitors in Windows 8 and Windows 8.1
  Link

  Microsoft Windows crashes or an error occurs
  Link

  Computer will not start in Microsoft Windows 8 or 8.1
  Link

  Windows 8 and Windows 8.1 STOP error (blue screen) troubleshooting
  Link

  To access the services of Windows in Windows 8 and Windows 8.1 Troubleshooting
  Link

  Resolution of the problems of account password in Windows 8 and Windows 8.1 Local
  Link

  Windows 8 and Windows 8.1 video settings
  Link

  Hello

  What is mean soon you too much.

• OfficeJet 6700 analysis via radio to 90% and then fails with an error of communication

  New HP Officejet 6700 Premium; no error during installation; -device not scan via radio: scan to ~ 90% with the visible image in the preview is when inaccessible window of the Scanner is returned with the error message "Scannner communication cannot be established.  Ensure that your product is turned on, check the connection... ».

  Dell Inspiron E1505 laptop. Vista; Trend Micro Titanium 2011 Dell

  1. Network wireless, print, fax work very well.
  2. Software has been uninstalled, cleaned and resintalled.
  3. Fixed IP address received.
  4. Windows drivers are the most common, HP device firmware is up-to-date.
  5. When the trend is disabled, scanning works completely.
  6. All scanning functions and work completely through USB with active trend.
  7. MS Paint scanning to the device wireless without problem with active trend.
  8. Ports below were opened in the Windows Firewall.

  TCP UDP
  137 137
  138
  139
  161

  427 427

  9100

  9220

  9500

  • Printing and scanning doctor works and ends when the trend is disabled.
  • Print and scan doctor hangs up on Scan Test and returns the same communication error window when the trend is activated but no further information or help.
  • Contacted Support of trend, which has provided information on how to create an exception in the product and advise him to: "... to add the file scanner to the program exceptions list."   Trend has been unable to give advice on what specific HP or the files to add to the exceptions list.
  • File by file, the following files have been added to the list of exceptions of trend without effect:

  C:\Program Imaging\devicemanagement\hpzscro1.exe HP

  C:\Program 6700\bin\HP Officejet HP Officejet 6700.exe

  "\HP Officejet 6700UI.dll.

  '\HPNetworkCommunicator.exe '.

  '\HPScan.exe '.

  '\HPScanDisco.exe '.

  ScanToPCActivation.exe

  ScanToPCActivtionUI.dll

  Toolbox.exe

  ToolboxUI.dll

  C:\Windows\twain_32\HP Officejet 6700\HPScanUI.dll

  '\Scanapp.ini '.

  '\hpxsTwain.ds '.

  • Device IP address correction has been added and listed as an exception in Web site.
  • Other computers are able to scan wireless unit.

  Are there other HP file or file windows called scanner of HP who participates in the scan Communication that must be added or tried?

  A short history:

  After spending 4 hours and countless computers, printer, router restarts, channel changes etc, on the phone with HP printer support, to solve this problem, I was called back to my firewall provider (Trend Micro) when the product is disables scan works. (Yes, it's the same question that I started.)  As you can imagine made me unhappy...? Since I had already made contact with them for advice on how to configure the product before posting here in the first place and, possibly, appellant assistance from the printer.

  The solution was finally trend had me to rename a file in the registry, which, I presume, caused the trend product regenerate a clean version of the file.  As trend firewall exceptions had already been saved, scan over wireless works now! I post the location of the file and registry name, unless you use the identical product etc. to modify your registry database is scary business.

  Naturally, because it was just going to be like that, scan network worked, but then the network printer showed offline and I couldn't online despite shooters evil etc.  In the end today I completely uninstalled the product and the resinstalled it and now everything works.  Hard to be too crazy about HP, when, notwithstanding this saga, HP was right to send back me the vendor of the firewall... everyone gets their turn in the barrel of the dysfunction of the technology, and it was mine.

  What a striped set incredibly complicated of technologies that we depend on.  Travis, thanks for your help and trying on it.

• Xilinx Compilation error: Formal HDLCompiler:432 &lt; eiosignal &gt; has no real or default value

  Hello

  I've compiled several programs for sbRIOs previously but did not run in before compile errors. I can't find any support to see what is actually wrong. Any help with this would be appreciated!

  The summary of the situation of the Compilation is:

  LabVIEW FPGA: Compilation failed due to an error of xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 87: Formal has no real or default value.
  INFO: TclTasksC:1850 - enforcement process: synthesize - XST is made.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000032_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 106: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000033_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 125: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000034_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", Line 144: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000035_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 163: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000036_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 182: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000037_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", line 201: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000038_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" at line 220: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000039_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 50: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd ignored errors

  -->

  Total memory use is 189944 kilobytes

  Number of errors: 9 (0 filtered)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  I had similar errors (not real or by default) then compile using the code LV would not remove, but the compiler Xilinx would be due to determine it was unused.  It is usually inaccessible code with a register read in the main loop, but write it to enroll in a deal structure that would not be executed.  Differences in the ability of the LV compiler or compiler of Xilinx to decide what is safe to delete this could lead.

  Other times we had errors when a clock has been specified in the file of constraints, but the clock was not used.

  Maybe one of these two seemingly unrelated points might help.

  Shane.

• Outside regs, reg 1239 compiler error

  I installed LV2009 and trying to open the version 8.6 vi.

  I get a message "compilation error. Report this problrm to Technical Support from National Instruments. off-regs - no release candidate has found, reg 1239! »

  32-bit client of Labview on Win 7 64 bit and Win Server 2008 64 bit give the same error.

  The attached code.

  Technical support NOR suggested installation LV 2009 service pack 1, which fixed the problem.