VSM appears no not after installation
I installed vsm 4.0 on my vcenter, but after the installation, I do not see any icon of MSM on the House of vcenter.
only the VM VSM is displayed in the VMS and templates.
I m with vsphere 5.5.
Downloaded the Manager of virtual storage from dell for vmware v4.0 (EGGS) to install.
Hello Alex,.
Are you using the Web Client vSphere vCenter? VSM 4.6 icons appear only on the web interface.
If you use the web client and still does not work, you must restart the services vCenter.
Let me know the results.
Best regards
Tags: Dell Products
Similar Questions
-
Image appears does not after installation of APEX
Hello gurus.
I installed 3.2 on XE and after installing APEX, images are not displayed to the top. The default URL is http://localhost: 8080/apex/apex_admin. In addition, when I get ID them admin and the password. It doesn't do anything. The status baar browser indicates error on page.
Installation has been successful, according to the journal of PRECAUTIONS. Here are the contents of the Setup log. Don't know what don't get me. Any ideas? Thank you, R
-------------Thank you for installing Oracle Application Express. Oracle Application Express is installed in the APEX_030200 schema. The structure of the link to the Application Express administration services is as follows: http://host:port/pls/apex/apex_admin (Oracle HTTP Server with mod_plsql) http://host:port/apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway) The structure of the link to the Application Express development interface is as follows: http://host:port/pls/apex (Oracle HTTP Server with mod_plsql) http://host:port/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway) JOB_QUEUE_PROCESSES: 4 PL/SQL procedure successfully completed. Session altered. Performing Application Express component validation - please wait... Completing registration process. Validating installation. PL/SQL procedure successfully completed. timing for: Validate Installation Elapsed: 00:00:42.14 Session altered. ...Adjust flow owner to install owner 10 rows updated. Commit complete. ...Adjust flow version FLOW_VERSION -------------------------------------------------------------------------------- 3.2.1.00.12 1 row selected. 9 rows updated. 1 row updated. Commit complete. VII. L O A D E N G L I S H D I C T I O N A R Y Trigger altered. ...10000 rows ...20000 rows ...30000 rows ...40000 rows ...50000 rows ...60000 rows ...70000 rows timing for: English Dictionary Elapsed: 00:00:58.62 -- Now beginning upgrade. This will take several minutes.------- -- Ensuring template names are unique ------- -- Migrating metadata to new schema ------- -- Switching builder to new schema ------- -- Recompile WWV_DBMS_SQL ------- -- Migrating SQL Workshop metadata ------- -- Upgrading new schema. ------- -- Copying preferences to new schema. ------- Upgrade completed successfully no errors encountered. -- Upgrade is complete ----------------------------------------- timing for: Upgrade Elapsed: 00:00:29.73 ...End of install if runtime install ...create null.sql timing for: Development Installation Elapsed: 00:07:20.56 GLOBAL_NAME ------------------------------ SYS
Hello
Probably you do not update the DB images.
This might help
Re: Upgrade problem Apex 2.1 to 3.2.1 in Oracle Database 10g Express EditionBR, Jari
-
Application appears no not after installation
I tried to test my application on a current device, a BlackBerry 8300 Curve and the application has been installed successfully and everything, but not its appearance with the other application.
8300 has no request or download folder as the 8900 and 8350i (emulators that I work on 4.6.1 JDE)
I enter the list of applications on advanced options and the application is listed
Any help on the issue will be more appreciated because google has not much helpes
Your curve running 4.2.2 then you should develop a JDE which is 4.2.2 or less. As there is not a JDE to 4.2.2 you must use 4.2.1. Can you recompile on 4.2.1 and test on devices/simulators.
BlackBerry code is forward but not backward compatible. Code developed on older d runs on devices with new OS, but not the reverse.
Edit: Added the following Article reference.
What is - an appropriate version of the BlackBerry JDE
Article number: DB-00537
http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is... -
Unit does not not after installation, missing drivers, dot know were to get drivers
Unit does not not after installation, missing drivers, dot know were to get drivers
George2222 (2) you were right. Problem solved, thank you.
-
BlackBerry Smartphones BLACKBERRY APP WORLD ICON doesn't APPEARS DO NOT AFTER the upgrade!
I upgraded my Blackberry App world, last night and the icon does not appear in the list, tried to download it via different modes but it doesnot anything on the contrary he says: "sorry, your session has expired. "Please close all your browser windiws and then return to the home page to start over.
nothing happens pls help!
I would say this:
Go to Options > device > advanced > Applications then highlight the AppWorld application IF it shows up as installed and do not click it, just scroll to it. Click Menu > delete and remove the application.Now, do a restart: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.
Finally, use your BlackBerry browser to go to the www.blackberry.com/appworld and download/install again.
After installation and restarting possibly another, check your download folder or other frolders of application. -
some characters on the keyboard does not not after installation of macos sierra
keys on one side does not not after installing sierra on my mac pro book
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
Also the keys do not work in recovery mode?
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Halo 2 does not not after installation of Vista Service Pack 2
Original title: HALO 2
Hello
I've installed HALO 2 on windows vista Home premium sp1 on (vm ware) and it worked without doubt... after I installed sp2 game gave me a white window and does not start...Do you think the problem is the new service pack?Hi Plast000,
Follow the suggestions below for a possible solution:
Method 1: I suggest you perform the clean boot and check whether the game will work.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.
Method 2: You can follow the procedure in the article and mark mentioned below.
"LIVE Gaming on Windows cannot initialize" or "system cannot find the path specified."
http://support.Microsoft.com/kb/941208
Let us know if that helps.
-
Captioning appears no not after the first
Try cc for the first time. I added a CC object and added a few legends of the sample. One looks fine in preview, but later have problems. I got a screenshot of the configuration...
Note that the previews of the 2 and 3 are empty. I checked three times and the text isn't black.
No caption 2 or 3 appear when the timeline scrub or play the preview. I tried to make everything, but no change. I had a test configuration different last night where #3 would appear for every 1.5 seconds, then all but the last line would disappear for half a second, then it would also disappear. In this configuration, sometimes rendering would appear but not often.
Is there something about CC setting that I don't understand?
Using of 2015.0.Release, although similar problems appeared when I tried the same thing with 7.2.2
Each caption line is no longer than 32 characters, including spaces - max quantity of lines, by block, 4
You can go here too, for more questions legend:
-
Page of developer apex 4.2 not appearing is not after the installation of more than 10g
Hello
If by chance it crashed my Win XP OS. Yes, it is the portable desktop and I can't upgrade the OS for now. In any case, I had the whole machine reconfigured and installed 10 g which was version 2.1 and everything was fine. Earlier, I was running apex 4.1.1. I couldn't find the installation on the site of oracle, so I downloaded apex 4.2 and ran the installation according to the page
http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/upgrade-Apex-for-XE-154969.html
Everything went through properly except for step
5 log in to SQL * more (as above) and load the images:
SQL > @apxldimg.sql APEX_HOME
[Note: APEX_HOME is the directory that you specified during the have decompressed the file.] For example, under Windows "C:\". ».]
where it asked me to enter the directory and I walked into C:\
This is what happened
SQL > @apxldimg.sql
PL/SQL procedure successfully completed.
Enter the value 1: C:\
old 1: create the directory APEX_IMAGES as '& images/apex/1 '.
new 1: create the directory APEX_IMAGES as 'C:\/apex/images '.
Created directory.
^ C
C:\apex >
I see a backslash and oblique so I did a ctrl c. When I tried running the new command - @apxldimg.sql
He would just open the .sql file.
Don't know if this is the problem, but still, after that, when I tried the 'go to the page of data. It shows just a blank page. No idea of what needs to be done. I was happy with 4.1.1. Which is available anywhere? Maybe I can remove XE and do a fresh install with it.
Please notify.
Thank you
RyanTry
C:\
Even if it gets rewritten as C:\/apex/images I think that it will always load the images correctly. If the script takes less then a minute (depending on the speed of your machine), then he probably did not.
-
Login page appears no not after cloning.
Hello
We have Oracle EBS 12.1.3 with database 10g RAC on RHEL.
Recently, after cloning, we can not get the login page and the following error message appears: -.
"Could not generate the redirect URL. "Exception: Oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating object that can be aggregated.
Please guide in problem solving.
Thanks in advance
Are there errors in the database log files?
Please check the files of application log for more information on the error-(Doc ID 1964851.1)
Please also see (Doc ID 1598680.1) and (Doc ID 1626838.1).
Thank you
Hussein
-
Hello
I downloaded 11.1.1.7 OTN jdeveloper. After installing and adding SOA extension, I'm still not managed to create a SOA application.
1 tried the windows.exe and the jar version.
2 installed the extension on OTN and also, zip file downloaded.
3. after the installation, the very 1st time, I am able to see the jdev with SOA app. Once I have quit the jdev and reopen after awhile, this option disappeared.
Please suggest.
Uninstall and reinstall the extension. View (but for a different version)
-
Cloud app creation does not not after installation
Dear concern,
I have download the installer of creative cloud from the adobe.com for the title of test site, after installing the application creative cloud his does not open & keep loading for several hours. and restarted the machine, I reinstalled the creative application of cloud but still having the same problem.
Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress
-
Manager application Adobe appears no not after effects update.
I have IMAC with 8 GB of ram and processor Intel I5.
I'm trying to update after effects from13.5.0.347 by but my Adobe application manager does not show the update for the legacy yet I scored in it for the highest priority. (or whatever he calls)Thanks in advance for the help.
Please see:20141 App updates not showing upward into the clouds Creative
Updates in the cloud do not appear to be available (body)
I hope this helps.
Greetings
Megha Rawat
-
InDesign CS6 spelling does not not after installation of the Plugin Blurb
I am running Adobe InDesign CS6 Version 8.0 on OS X Yosemite Version 10.10.5 and installed the last Plugin Blurb (Blurb book creator CS6 v2.7.0.20d18s.dmg): http://www.blurb.com/apps/InDesign-Plugin/v2-download
After installing the Plugin, I point out spelling CS6 InDesign no longer works. Spell check worked perfectly just before installing the Plugin.
I see that my operating system does not appear in the list of Blurb Book Creator download (it goes only until Mac OS X 10.9).
I created a layout without other problems (as far as I can tell) I just don't seem to not be able to run spell check.
Any suggestions for how to fix this?
Thanks in advance for any help.
If someone else has the same problem, here is the solution (thanks to Grabzoo on a previous discussion forum):
Open the paragraph Styles Panel, and then double-click one of the styles (i.e. [standard paragraph]). Click on the "Advanced character Formats" tab in the left navigation menu; Verify that the language is set to your preferred language (e.g. English: us.).
Do this for all the styles listed, and then save your document. Run the spell checker and your problem should be solved.
It worked for me.
Thanks again for all your suggestions.
-
CS5 does not not after installation into Time Machine... Cannot download site
I had to wipe the hard drive and reinstall all my apps. Suite CS5 my (I have a license) cannot be started after my installation time machine.
Also, I can not download entirely direct download from adobe.com (https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html) for CS5 to clean install and had to rely on time machine for my old version (the installation disc is lost). But then the download from direct download on adobe.com, it stops at halfway and State "you don't have permission to access to...» »
Help, please... I'm not passionate about the upgrade and pay for a new license.
Uninstall everything that you have and that you use the cleaning tool. Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
Before you download, make sure that you have enabled cookies and clear your cache. If he continues to not try to use a different browser.
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
Maybe you are looking for
-
Question about the Satellite C50D of charge
Hello I have a problem with the battery on my Toshiba laptop. I connect and it says "charge (100%). ", but as soon as I disconnect the battery supply cable down exactly 50%. I don't know how much time he did this, but it's very frustrating not being
-
my mouse continues to go to different place when you enter?
My mouse keep jumping to different locations when you type any text. Can anyone help?
-
I have a code 10 error when I insert my SD card. How can I fix it?
I have a code 10 error when I insert my SD card. I click on update driver, to connect to windows update, but it cannot complete. Is there any solution for this? I reinstalled windows a few months ago SD card worked fine until a few days ago. Than
-
can not find drive f: on my windows vista computer
I can't find any other my removable drive as f drive on my computer. all this shows is my dvd drive (drive E). How can I find this show I can trasfer pictures on an sd card?
-
How to change the setting that indicates what program automitally downloads of photos
I need to know how to change the default setting? Help