VSOM MSP RHEL Server runtime error

Similar Questions

• Windows media player does not work; get a server runtime error

  I took my computer to repair store to have repaired minor problem.  They fixed the problem I had, but in the process they must have done something to Windows Media Player.  I didn't until I got the home computer.  The Media Player is the only problem;  the Media Center works great. Recover a server runtime error whenever I try to do something with the Media Player I really don't want to take the computer to the repair shop, who did a bad job in my opinion, any help would be appreciated.

  Search the forum for the server runtime error and you will find several questions on the subject, so one of the suggested solutions might also work for you.

• Tried the FAQ help still getting a runtime error, server with a Web site error

  I tried several times to go on texags.com forums that I have in the past, but get the following message.

  In the Application Server error ' / '.
  Runtime error
  Description: An application error occurred on the server. The current settings of error customized for this application prevent the details of the error in the application being viewed remotely (for security reasons). It could, however, be read by browsers running on the local server computer.

  Details: To enable the details of this error message specific either visible on remote machines, please create a < customErrors > tag in a "web.config" configuration file located in the root directory of the current web application. The < customErrors > tag should have its attribute of 'mode' on 'Off '.

  <!-- Web.Config Configuration File -->
  
  <configuration>
      <system.web>
          <customErrors mode="Off"/>
      </system.web>
  </configuration>

  Note: The current error page, you see may be replaced by a custom error page by modifying the "defaultRedirect" of an application < customErrors > attribute tag configuration to point to a custom error page URL.

  <!-- Web.Config Configuration File -->
  
  <configuration>
      <system.web>
          <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
      </system.web>
  </configuration>

  Other people on the forum using firefox without problems and I did in the past. I'm moving to Chrome, but it is a huge block for me. I checked the updates and erased the history and cache as suggested in the FAQ. Any advice?

  Thank you. I tried only the part about the deletion of my story. Supposedly to forget this site or adjust my cookies solved the problem.

• Why open links in Firefox causes a "Server error in ' / ' Application Runtime Error" but not in "Internet Explorer"?

  When I click on certain links in an e-mail message (and Firefox is the default browser), I get the following error:

  In the Application Server error ' / '.

  Runtime error
  Description: An exception occurred while processing your request. In addition, another exception occurred during the execution of the custom for the first exception error page. The request was interrupted.

  If, however, I follow the same links (and Internet Explorer is the default browser), I get no error and the good content of the link is displayed.

  What is causing this error? As I prefer Firefox, how can this problem be fixed?

  Windows 7 Service Pack 1 operating system
  Firefox Version 32.0.1
  Internet Explorer Version 11.0.9600.17280

  Thank you for your help.

  First

  When you look at the address in the address bar, it seems to coincide with the e-mail?

  It seems that Firefox has sent the server something it was not expected. Sometimes this can be caused by obsolete or damaged cookies - assuming that you have visited the site before. It could also result in changes of standard information sent to servers such as the string 'user agent' that specifies your version of browser and operating system.

  To clear cookies for a site, while displaying a page on the site, either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.

  Then try to reload the page. Who help me?

• Library of visual c ++ runtime error message microsoft when you install the Backup Exec Server 2010 continues to protection on Windows storage server 2008

  When I try to install the Backup Exec 2010 Continuous Protection Server on Server Windows storage server 2008 I get error microsoft visual c ++ runtime library error. Runtime error! The setup.exe has put an end to this application has requested in a medium unusaul.

  Hello

  Your question is better suited in Windows server on TechNet. Please post your questions here.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Server 2.0.0 - host Agent stops with C++ Runtime Error

  Hello world

  I have a frustrating problem that was due on my Windows Server 2003 Datacenter Edition.

  Box is a: HP DL380 G5 - 2 x Xeon Quad Core E5405 - 16 GB of RAM

  I am running VMware Server v2.0.0 - 122956.

  This machine had been running this version of VMware for several weeks without problem.

  The server was arrested last night, and when he came online this morning, I discovered that the Agent Host kept stopping.

  On the screen a box appeared titled "Microsoft Visual C++ Runtime Library" and contained the following information:

  Runtime error!

  Program: & lt; blank & gt;

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.

  -

  ---

  I can close this dialog by clicking OK and if I look at the services, host Agent is no longer running. If I start it again, it will do the same if for a few minutes.

  I uninstalled VMware Server, rebooted and reinstalled. Still happens...

  I uninstalled v 2.0.0 v2.0.1 restarted and installed and restarted again...

  Can anyone think of a reason why this might have started to happen?

  Any help would be much apprechiated that we are does not now due to not being able to run our virtual servers!

  Thanks in advance,

  Barry.

  Winton Arts and media College

  Hello

  Have you checked the server logs? Is there anything related to this error?

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  Post edited by: janlib

  I recall there was problems with missing DLLs (msvcr80.dll or msvcr71.dll). Please check in the event viewer.

• I went to check the letter American Legion for this month, I get a runtime error?

  I was do my email pok, but this month I aug.2014 check with the Legion and are gone send my name and email address.incase, she was lost, but I get this server "/" application then runtime error, I don't know why

  This also happens with the current version of Firefox 31?

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• 17600 Runtime error code

  Hello

  I get an annoying runtime error when you try to run my sequence file.

  the error is:

  Unable to load the 'T:\ATE\TS-e-Detect\e-Detect CAT2 Status.vi' VI in the version of "13.0.1f5" LabVIEW runtime engine

  (I've also attached a picture of the full error)

  I've never seen this before and I'm at a bit of a loss as to how to fix this!

  I am uing LabVIEW 2013 verssion 13.0.1f5.

  The screw that calls the sequence file are published as a source distribution and located on my server, what I see under all the screws have been added at the distribution of sourse was built.

  Did anyone had this problem before and able to point me in the right direction?

  Any help is greatly appreciated!

  Thanks for watching!

  Iain

  I found what was causing my problem.

  Some of the screws that have been published related to the various bodies or screw SPI.

  I deleted all references to these screws of my project and then Redid the links and redid my source distribution.

  Took forever to get out, but I got there in the end!

• Tagsrv.exe C++ Runtime error during the shutdown of the PC

  Hello

  When we close an error appear with the message:

  Visual C++ runtime error!

  C:\Programme\National Instruments\Shared\Tagger\tagsrv.exe

  No address or other information.

  I have not found

  http://digital.NI.com/public.nsf/allkb/27A007940341705B8625716500723B97?OpenDocument

  But we don't use LabView.

  Can someone help me? Thank you!

  Environment:

  I use Visual Studio 2008 SP1 installed

  Measurement Studio 2003 v7.1.0.306

  NOR-DAQ v8.8

  NOR-488. 2 v2.60

  NI-VISA v4.4.1

  Traditional OR-DAQ v7.3

  List of the application of the system error says:

  Die description der Ereigniskennung (0) (NI Variable Engine) wurde nicht found. Der local Computer has nicht über die zum show der von einem sRemoteComputer erforderlichen Registrierungsinformationen oder DLL-Meldungsdateien messages. You must flag/auxsource das Sie einen is zum Ermitteln der description use. More information are Hilfe und Support. Ereignisinformationen:

  NEITHER Variable engine started.
  Executable: C:\Programme\National Instruments\Shared\Tagger\tagsrv.exe
  Plug in the path: C:\Programme\National Instruments\Shared\Tagger\
  Plug-Ins: LogosRTServer, NI OPC Server Plugin., MXS, LogosRTClient.

  Hello NI_addict,

  first the bad news: Measurement Studio 7.1 is developed for Visual Studio .NET 2003 and it is not supported in Visual Studio 2008, Visual Studio 2005 No.

  (I think you know who...)

  Maybe I can help you in any case.

  I think the message has to do with the shared Variable engine. (Shared variables are an easy to use way, sharing data between computers of a network).

  First step, you must perform the actions described in this document: http://digital.ni.com/public.nsf/allkb/27A007940341705B8625716500723B97?OpenDocument

  "" You will find the Variable manager programs as"National Instruments" Variable Manager ' Manager of Variable.

  "If this does not work you can try to turn off the shared variable engine: open the Control Panel start ' Control Panel. Select Administrative Tools' Services. Right-click on the Variable of National Instruments engine and stop the engine Variable. (Disable the Variable engine will not affect your other programs or Measurement Studio unless you use shared Variables.)

  When shut down you your computer, do you still get the error? We will have you uninstall and then reinstall the engine Variable.

  I hope it will solve the problem.

  Good day.

  N. Ralf

  Engineering applications

  Germany

• SE runtime error shortened application on my Vista computer

  I run windows Vista and use mozilla firefox. Its a Fujitsu siemens computer.
  Access my wireless, I have to press Fn and F1
  I have checked my (6to4) wireless adapter in Device Manager and get this error message that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).  I also have a network adapter wireless Atheros AR5007EG, which seems to work very well, but can not use the wireless on my laptop.

  I tried drivers udate but that comes by saying that they are up to date and also tried searching for solutions, but nothing comes back.

  * original title - I get runtime error shortened application on my computer, and then it keeps closing. Now my wireless keys do not work. Can help you with a soultion? *

  Hello
  You can follow below link that can help you to solve your problem:
  Error message when you attach a PCI Express expansion chassis to a computer that is running Windows Vista or Windows Server 2008: "Code 12" or "Code 31"
  http://support.Microsoft.com/kb/942959
   

  If nothing works, try to uninstall and install the drivers for your wireless network adapter

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your driver CD. After installation, create the connection.

  Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.

  Note: Please make sure that you have downloaded the drivers or have a driver installation disk before you uninstall the drivers for the network card

• OneDrive of browsing for the file of the company is blocking explorer.exe with visual c ++ runtime error

  I posted this in the OneDrive for business forums and was told to come here because they were not able to climb it - a few other people responded saying that they had exactly the same problem.  I copy + paste the original message here.

  OK, now let me preface this by saying: I was fix this for the better part of a week and I am puzzled.

  I work in the it Department for business (~ 200 employees) medium, we have recently migrated our the server local exchange to Exchange Online (we are now using a mixture of licenses Office 365 E1 and E3) and we have since then all members of society with their synchronizations of OneDrive.

  About 200 people, that we have put in place, there is a person who has this problem - when he opens the file Explorer and looks in his folder OneDrive @ company, less than a minute, it will get a Visual C ++ runtime error and explore crashes / restarts and is able to work again.  Of course, within a minute, the same thing happens. It is under windows 7 x 64.

  This particular user has a mixture of files .dwg-AutoCAD, PDF, word/excel files and jpg files on his onedrive for a total amount of approximately 7 GB.  It uses the preview in the Explorer pane, and I saw a similar problem during its use in the past, so I applied the patch and it did not help.  If I disconnect his onedrive and move his files back in its documents folder, it can browse its files without any problems whatsoever (including using the preview pane).

  want to hear the best part?  I set him up on a laptop quite different from ZERO and it does EXACTLY the same thing!  No one else in the company is having this problem, and almost every other laptop that we deployed using the same exact configuration.  I'm starting to think, it could be a problem with his records, but I'm not sure - go to synchronize its reader to my computer to see, even if I'm on windows 8.1.

  Everyone knows about this type of problem?

  Also, I already tried to delete the cache of records office and completely reinstalled onedrive on the original computer.

  This is clearly a problem inherent in the OneDrive itself.  Let me know if any kind of logs are needed.

  I could never get anyone to help me here so I ended up spending the user assigned to windows 8.1 and it helped.  Sometimes it happens again but windows 8 is much better at handling explore crashes, so it's just a quick blip and he is back at work.

  Good luck.

• Download the runtime error "this application has requested the execution in an unusual way. Please contact support. »

  Original title: problem with the search function of the browser.

  Hi all
  I hope that everything is fine, I'm having a very strange problem.
  A user when they access a particular network drive and try to use the search function of the browser he invites the following error
  Runtime error
  Program:

  This application has requested the execution in an unusual way. Please contact the application support team.

  I checked the event viewer on the user's machine and the server hosting the share, not events appear on the issue.
  I tried with the user's machine in safe mode with networking, and the problem persists
  Of course, it does not have the application or program is the cause.
  I have confirmed that all windows updates are up-to-date.
  I spent looking for windows services and swapped 1 0, which has opened three of the four discs network for research
  the last of them is continues to cause this error.
  User computer is windows 7 Professional 64-bit
  Server is 64-bit windows server 2012.
  I'm at a total loss as to why what is happening on both machines in 10.
  for any help or suggestions would be most appreciated.

  See you soon
  Josh

  Hi Josh,.

  Given that you have this problem on a domain network and you use Windows Server 2012, ask to view the query in this TechNet Forum for better support.

  TechNet Windows Server Forum

  If you need any other help with Windows, we will be happy to help you.

• Examples of error performance... ? Difference between the runtime error and the syntax error?

  Hello, I know that an implicit validation occurs before a runtime error.

  What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).

  Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.

  Hello, I know that an implicit validation occurs before a runtime error.

  You do? How do you know that? What is the source of your information?

  What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).

  The syntax is checked at the time of the analysis/compile. Runtime errors occur to, of course, of execution time. You can NOT run sometimes that there are syntax errors.

  Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.

  Ideally, Oracle has created an entire book of them. Make your choice.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28278/TOC.htm

  The doc PL/SQL treats Exceptions language and everything that you always wanted to know about them. It also includes examples

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/errors.htm

• Formula for [member] runtime error: status [1130203] code

  Hello everyone

  I have the following error message when you try to retrieve data in srepadsheet Add-In: "formula for [member] runtime error: status [1130203] code".

  Also, I tried to run a calcscript by ODI and I got the error on: ERROR - 1013289 - command [MaxL: run] failed due to memory allocation failure.

  It is an application of OSI in Hyperion Planning 11.1.1.3, I found in the forums that it could be a question of memory. I checked the essbase.cfg and I found this:

  DataErrorLimit 65000

  CalcCacheHigh-1100000000

  CalcCacheDefault 500000000

  CalcCacheLow 30000000

  4000000 CalcLockBlockHigh

  CalcLockBlockDefault 900000

  CalcLockBlockLow 400000

  UpdateCalc False

  NetDelay 3000

  NetRetryCount 1000

  MultipleBitmapMemCheck True

  ParCalcMultipleBitmapMemOpt True

  ; CalcParallel 1

  DYNCALCCACHEWAITFORBLK TRUE

  DYNCALCCACHEBLKRELEASE TRUE

  DYNCALCCACHEMAXSIZE 600M

  DYNCALCCACHECOMPRBLKBUFSIZE 400M

  Is it a memory problem? How can I solve it?

  Kind regards

  It is certainly not a problem with your server that you have enough memory. I do not suggest to use memscaling now as it helps anyway for 32 - Bit

  It is because of the values that are defined in your config file.

  Data cache, cache index slightly seems good.

  I suggest you reduce the CALCCACHEHIGH and the CALCCACHEDEFAULT as the Cache calculator may take a maximum of 200 M

  Try to reduce the DYNCALCCACHEMAXSIZE and all the relevant settings for DYNCALCCACHE

  Take a look at the technical reference information

  I would say to reduce / remove these settings, restart the services, the same testing process and see if they are causing the problem.

  Concerning

  Amarnath

  ORACLE | Essbase

• GlassFish tools does not provide a Server Runtime for Java Build Path

  The server can be added to the servers see and start and stop works very well.

  However, adding the server to the classpath of a such project does not work:

  1. Right click on project > Properties
  2. Select Java Build Path
  3. Select the libraries tab
  4. Click Add library...
  5. Choose Server Runtime

  Real: The selection dialog box is empty.

  Expected: The dialog box lists a duration of GlassFish 3.1.

  Thus, the classpath does not contain the Java EE and API JPA, resulting in compilation errors. This allows to work with older versions of the plugin (for example that of http://download.java.net/glassfish/eclipse/indigo).

  The problem is at least in the following configurations:

  • Eclipse 4.3 RC3 with GlassFish tools 6.0.2.201306071627 and 3.1.2.2 GlassFish Server
  • Eclipse 4.2.2 with GlassFish tools 5.2.2.201305291930 and 3.1.2.2 GlassFish Server

  One ugly solution (until this problem is corrected) is to manually add the following (or more) pots via external Jars Add...:

  glassfish/lib/javaee.jar
  glassfish/modules/org.eclipse.persistence.core.jar
  glassfish/modules/org.eclipse.persistence.jpa.jar
  glassfish/modules/org.eclipse.persistence.asm.jar
  glassfish/modules/org.eclipse.persistence.antlr.jar
  

  The problem with the above is that it adds absolute paths to the .classpath and therefore cannot be committed to the repository.

  What is the problem? This GF is not available as a Server Runtime (question at the beginning of the thread) or the problem of classpath with GlassFish System Libraries?

  The problem with GlassFish libraries on the system works is not with the flag of the export has been resolved. The old method of being able to add libraries system GF to any Java project without targeting GF won't.

  I see that 6.0.3.201306271729 has been released, does it include the fix?

  The pre-release version you are referencing does indeed of this fix.