VSOM-POC-Clarification needed

Similar Questions

• Clarification needed Pavilion a1120n memory upgrade

  First time on the Forum, need for clarification after reading others entry and to collect the necessary information on the PC in question.

  HP Media Center Edition Pavilion a1120n

  Processor: Pentium 4 519 (p) 3.06 ghz

  Motherboard: Asus LRTP - THE (3 goldfish - GL8E) front bus at 800 mhz

  Will support maximum 4 GB of ram

  Unit is equipped with 4-240 pin Dimm, unbuffered, non - ECC 533/400 mhz sticks memory memory DDR2, dual channel architecture

  This office has 2-258 or 516 MB PC2 3200 DDR SDRAM OEM.  I opened the unit to check for this.

  OEM preloaded with Windows XP Media Center Edition.

  Now, most anyone looking at this request, probably why I'm wanting this on such an obsolete machine...

  I have bought new at the beginning of 2005, used the PC for a few months, remarried & it packed to move.  My husband had a Pavilion, so instead of having 2 running side x side, I copied my files in his unit, left (the most recent of the two) packed mine, thinking that we would need it down the road.  The road became long 7 years.  More to the story, but I'll spare you the pain. The only way I can use this material is upgraded to Windows 7 home & I need to increase the memory to install even.  It will be dedicated to the dissemination of music on the internet in the shop, period.

  Here are the complete specs for your HP Pavilion a1120n desktop and it is card mother PTGD - THE (Goldfish3). Please consider the purchase of 2 of the CORSAIR 2 GB Kit (2 x 1 GB) 240 pin DDR2 533 (PC2-4200) VS2GBKIT533D2 or 2 of the Crucial 2 GB kit (2 x 1 GB) DDR2-667 PC-5300 #CT475923 to bring your computer to the 4 GB maximum, it supports.

• Initiate the process: clarification needed

  Hello gurus

  1 clarification if the validation process writes the new data in redo files online when we question this statement where the data is read in

  (1) from redolog files online?

  (2) (or the data files? I doubt because data files will be updated only when there is point of control or stamps Sales reached full

  Please provide details

  S

  Once the data are updated and committed, it can still be present in the cache of the buffers as buffers "Sales".  Oracle can write down to the data files on drive sooner or later.

  Anyone questioning the data after that validation will probably recover in the buffers in memory.  If, however, the data has been written to disk and the buffer memory are no longer available, the application must make a reading of the disc (data files).

  Hemant K Collette

• Several CPU VM - Clarification needed

  I have a few questions that I need stated on several CPU VM. So here it goes... one of our existing ESX servers, we have 8 logical processors (2 x quad core). All our virtual machines are uniprocessor VMS however a running SQL server and is now run out of resources because there have been some changes. Here are my questions:

  1. since it is a single CPU VM, does this mean that he can never use more than one of the logical processors (although there may be a large amount of free resources available on the ESX host)?

  2 is it bad to add a second processor to a virtual computer and why? I noticed it says in a configuration that it could cause the VM to become unstable.

  I would like to hear answers to the foregoing the benefits and disadvantages... personal experiences...

  Thanks in advance!

  (1) it is correct - a single vCPU can only work on one logical processor at the same time - a dual vCPU runs on two logical processors.

  (2) it is not bad to add a second vCPU if this is doen for the right reasons and it looks like you need a second vcpu - the reason why the recommendation for a single vcpu must with planning the vcpu - the vmkernel plan vcpus all a VM multi-vcpu simultaneously so if he can't schedule vcpus all the non-volonte get on demand - think of it this way it's easier to schedule 1 vCPU 2 or 4 - and if you have enough resources, you should be okay to add a second vcpu to your server SQL - the other thing to do if you add a second vcpu are of course the HAL is configured to support multiple processors.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Clarification needed!

  Hello
  
  I would like to ask you a few entries on one of the discussions of the forum of the installation.
  
  Installation on 10.2.0.4.0 DBMS_XMLSave
  
  Please let us know of your contributions in this regard.
  
  Thank you

  I hope that I have answered to your satisfaction in the other forum?

• HP eprint

  Installed hp eprint, a printer showed fine wks, boredom, adding a second printer without changing the settings, request another email address.

  Hi franks78. Just a small clarification needed on this one because there are a few different ways, you can use and configure ePrint. When you say 'installed hp eprint', do you mean that you have installed the application on a Tablet? If so, what kind of Tablet?

  In addition, you made an account with one of our sites ePrint:

  http://www.ePrintCenter.com or http://www.hpconnected.com

  I work on behalf of HP.

• Javascript break when thrown app.alert

  Hey everybody,

  So I'm pretty new to Javascript, so be patient.

  I created a form with several combo boxes that I validate when using final, click on send it via the email button that I created.

  Very simply on the mouse upward javascript code that runs:

  var DD1 = this.getField("Dropdown1").value;

  If (d1 is "Make a choice")

  App.Alert ("Please make a valid selection");

  Then I have the code that sends the form by e-mail.

  My question however, is if the app.alert is thrown to an "incorrect selection", the script still continues on and begins the email. I tried to move the electronic part of the script in a separate event for the mouse to the top. However, there is continuous on and launches the email.

  What I would like to have happen is the code eliminate at the end and skip the electronic part until all the app.alerts not throw himself.

  (old school way would be to use a function of type goto end.

  Thanks in advance,

  PS. If there is no clarification needed please ask, I tend to ramble.

  Place the order to send the form in another block after your

  If statements.

• Several General Questions VMSphere/hypervisor - of a VM noob

  Hello

  I am trying to wrap my head around the vm technology and I was hoping I could get some general indications. Any intervention on my sub questions would be more useful.

  1. What is the difference between ESXi Hypervisor and VMSphere?

  2. do I buy hardware from the HCL list to install the software?

  3. I am able to get a free license for VMware vSphere Hypervisor ESXi 4.1 + on the VM site. When I read the ESXi Setup Guide mentions buy licenses and will host to the evaluation mode. What it means? I complete the feature with the free license?

  4. is it possible to calculate the necessary RAM? The ESXi setup guide suggested that the 4 x demanding guest OS as 512 MB of RAM each eventually require 4 GB of RAM in the physical hardware. Does anyone have a guide for the calculation of costs? Is there a fixed RAM overload for the hypervisor software then determines the amounts for each additional guest OS that is actively running?

  5. can I operate more than one guest per core or processor operating system? Should I assign that one operating system prompted by core or processor?

  6. here is the application that I want to create - the VMSphere would be the correct software tool?

  A physical set of hardware in a laboratory to run several virtual machines that are different flavors of windows server. Our application will be loaded on every version of windows so we can check to see how the application reacts to different OS. The traffic/impact on our application server is negligible.

  If there is no clarification needed please let me know.

  1. What is the difference between ESXi Hypervisor and VMSphere?

  ESXi Hypervisor edition refers to VMwares free ESXi license edition.  vSphere refers to the paid version of ESXi.  This is the same code and the license key that you apply (whether free or paid) determines the features that are available.

  2. do I buy hardware from the HCL list to install the software?

  No, but if you go with low quality material, you may find yourself with questions of performance or stability that reflect the choice of the material.

  3. I am able to get a free license for VMware vSphere Hypervisor ESXi 4.1 +. When I read the ESXi Setup Guide mentions buy licenses and will host to the evaluation mode. What it means?

  When you register for free ESXi, you will get a serial number.  Apply the same way as described in the installation guide.

  4. is it possible to calculate the necessary RAM? The ESXi setup guide suggested that the 4 x demanding guest OS as 512 MB of RAM each eventually require 4 GB of RAM in the physical hardware. Does anyone have a guide for the calculation of costs? Is there a fixed RAM overload for the hypervisor software then determines the amounts for each additional guest OS that is actively running?

  Allocate 2 GB for ESXi and overhead, and then add what you need for virtual machines.  One of my guests of tests has 9 virtual machines allocated 13 GB and the host reports 14 GB in use.  ESXi is very good with the sharing of memory between virtual machines, so you can no longer allocate memory, but ideally get as much as you can.  It will make it easier if you find that you use several virtual machines that you have planned for.

  5. can I operate more than one guest per core or processor operating system? Should I assign that one operating system prompted by core or processor?

  You can run more than one vCPU by heart.  If the host is lightly loaded, you can get between 5 and 8 vCPUs by heart.  It really depends on your VM load.

  6. here is the application that I want to create - the VMSphere would be the correct software tool?

  A physical set of hardware in a laboratory to run several virtual machines that are different flavors of windows server. Our application will be loaded on every version of windows so we can check to see how the application reacts to different OS. The traffic/impact on our application server is negligible.

  It'll be just fine for this.

  Dave
  VMware communities user moderator

  ESXi Essentials free training / eBook offer

  Now available - VMware ESXi: planning, implementation, and security

  Also available - vSphere Quick Start Guide

• Evaluvating LiveCycle PDF Generator ARE

  Hello

  POC, I need evaluvate LiveCycle PDF Generator ES. When I went to the product from Adobe site to download the trail version, I'm redirected to download LiveCycle ES.

  Is this the right way. To install and evaluvate LiveCycle PDF Generator, how I download suite Livecycle full of about 3 GB?

  Is this even when I have the product provider? because I only need LiveCycle PDF Generator, will I pay if I have to use the PDF generator for LiveCycle ES?

  Thank you

  ANU

  Hello

  Yes, you need to download the whole package Livecycle ES2. When you install the product, you can select to deploy only PDF Generator. When you purchase the product, you can install from even downloaded the package "trial". You can choose to buy only PDF Generator, or you can buy PDF G + additional modules in the package that you want.

• I need a list of devices supported for VSOM 6.3.2

  I need a list of devices supported for VSOM 6.3.2.   The link I had previously recorded with this info for different versions of VSOM is no longer there is a world of Cisco.com.  Help, please.

  Thank you.

  I think that the list you're looking for are accessible through the portal of emerging Cisco Technologies to:

  https://www.ciscoet.com/resource/VSM-632-MR2-supported-devices-list

  I hope this helps!

  Scott Olsen
  Solutions specialist
  Bulletproof Solutions Inc..
  Web: www.bulletproofsi.com

• Need a Clarification on the installed component and run Simulator Configuration

  Help!

  I need clarification on what the plugin Eclipse is telling me. There are two parameters that are confusing me. For components installed (found under preferences/Window/BlackBerry JDE/Installed Components), I have a choice of 5.0.0 4.7.0,4.6.1, 4.6.0 4.5.0 and 4.3.0.

  Depending on which component I select when I go in the tab Configurations.../Simulator/course walk, I see a different mix of devices.  In all cases, there is a default Simulator.

  Initially, I assumed that each JDE component supports a mixture of different devices, and that is it compiled correctly, I would be assured that the app would work for all devices on the tab run Simulator Configuration.  In my tests, I found theopposite.  I also assume that, for each component of the JDE, there is a 'default' Simulator that was representative of all devices in the drop-down list run Configuration Simulator.  In my tests, am not sure what actually represents the Simulator 'by default'.

  Can someone clarify how to JDE and Configuration simulators run installed interact and a developer show how to ensure that their application is running on a mix of devices?

  When I finally get to the point where I am ready to deliver, what are the points of decision of installation?  Is it enough to simply require a specific version of an operating system (for example 4.7?) or do I have to create a grid and check the two model number and version of the operating system?

  Thanks for your help.

  "currentT shipping Curve 8330 come with OS 4.5" - they must be, as far as the carrier released a version 4.5.

  "Your statement that most consumers do not upgrade surprised me too" - only I support!  You might get a different opinion of someone else.  But the question is why would?  And our world app downloads indicate that he is did not upgraded phones out there.

  "I guess you are right in this assumption of statementI you are right in this statement"

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  "If there is some Curve 8330 there running 4.5 OS, it's a configuration supported." - correct

  "Construction of the 4.3 OS will be one where the menu appears in the upper right and the built 4.5 OS will be one where the menu is out."  Sounds good

• You can save a. CPTX (project) as one. CPTL (model) and convert later than for one. File CPTX? I just need a little clarification on this operation in Adobe Captivate 8.

  You can save a. CPTX (project) as one. CPTL (model) and convert later than for one. File CPTX? I just need a little clarification on this operation in Adobe Captivate 8. Thanks in advance!

  Sorry, but I neglected to include a bit small (but essential) information on this thing cptl.

  A file cptl is a model of Captivate. When you create one and create a new project based on a template, you point to the .cptl file. And at this time, no matter what the .cptl file has inside of it at this time is copied to a new project file. From there, you simply save the project and .cptx is assumed. The CPTL will already have the draft resolution together and many other things. The beauty is that once it is all set up correctly, it allows you to create faster training because you don't have to stop and consider things like the resolution of project, which should show the first slide, which should show the last slide, but also a host of other possibilities.

  The reactive substance, you need to ask one of the new kids on the block who is struck with it. I'm old school and have yet to fully embrace it. It's new and full of contradictions. And I really struggled with how many people ask to see training which normally runs on a large monitor displayed on their tiny phone screens where text messages are often barely legible.

  See you soon... Rick

• Need clarification on the ANSI joins

  Hi all
  
  I need some clarification on the ANSI join I am building to avoid an error when I try to run the same in standard join.
  
  With standard join, I get the error ORA-01417: a table can be external joined as another table.
  
  Regular join condition:
  Select null
  Of
  land_event_device_fraud dealer update,-T1
  land_event_device_upgrade T2, - New Subscriber first Set
  syn_intg_event_device_state T3, - subscribed existing
  land_event_device_upgrade T4 - new Subscriber Second Set
  WHERE T1.event_id = T2.event_id (+) AND T1.rate_plan_id = T2.rate_plan_id (+)
  AND T1.event_id = T3.event_id (+) AND T1.rate_plan_id = T3.rate_plan_id (+)
  AND T4.event_id = T1.event_id (+) AND T4.event_id = T1.rate_plan_id (+)
  AND T4.event_id = T3.event_id (+) AND T4.event_id = T3.rate_plan_id (+);
  
  -Get the error ORA-01417.
  
  Replaced the join above with ANSI join
  
  SELECT NULL
  OF land_event_device_fraud t1
  LEFT OUTER JOIN t2 land_event_device_upgrade
  WE (t1.event_id = t2.event_id AND t1.rate_plan_id = t2.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t3
  WE (t1.event_id = t3.event_id AND t1.rate_plan_id = t3.rate_plan_id).
  land_event_device_upgrade t4
  LEFT OUTER JOIN land_event_device_fraud t5
  WE (t4.event_id = t5.event_id AND t4.rate_plan_id = t5.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t6
  WE (t4.event_id = t6.event_id AND t4.rate_plan_id = t6.rate_plan_id);
  
  
  I want to know if the ANSI join is goig work properly or it will give me any Cartesian production information.
  
  Appreciate your help here.
  
  Thank you
  MK.

  Hello

  Maldini says:
  Hi all

  I need some clarification on the ANSI join I am building to avoid an error when I try to run the same in standard join.

  With standard join, I get the error ORA-01417: a table can be external joined as another table.

  Regular join condition:
  Select null
  Of
  land_event_device_fraud dealer update,-T1
  land_event_device_upgrade T2, - New Subscriber first Set
  syn_intg_event_device_state T3, - subscribed existing
  land_event_device_upgrade T4 - new Subscriber Second Set
  WHERE T1.event_id = T2.event_id (+) AND T1.rate_plan_id = T2.rate_plan_id (+)
  AND T1.event_id = T3.event_id (+) AND T1.rate_plan_id = T3.rate_plan_id (+)
  AND T4.event_id = T1.event_id (+) AND T4.event_id = T1.rate_plan_id (+)
  AND T4.event_id = T3.event_id (+) AND T4.event_id = T3.rate_plan_id (+);

  -Get the error ORA-01417.

  Replaced the join above with ANSI join

  SELECT NULL
  OF land_event_device_fraud t1
  LEFT OUTER JOIN t2 land_event_device_upgrade
  WE (t1.event_id = t2.event_id AND t1.rate_plan_id = t2.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t3
  WE (t1.event_id = t3.event_id AND t1.rate_plan_id = t3.rate_plan_id).
  land_event_device_upgrade t4
  LEFT OUTER JOIN land_event_device_fraud t5
  WE (t4.event_id = t5.event_id AND t4.rate_plan_id = t5.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t6
  WE (t4.event_id = t6.event_id AND t4.rate_plan_id = t6.rate_plan_id);

  You mix ANSI joins and the old joints. It's very confusing. Use all of one type or the other.
  >

  I want to know if the ANSI join is goig work properly or it will give me any Cartesian production information.

  What happens when try you it? Is it produces the results you want?

  Whenever you have any questions, post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data. Explain how you get these results from these data.
  Always tell what version of oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

  Why the SELECT clause includes only NULL? Is that going to serve as an EXISTS subquery? If so, why bother to make the outer joins, and why do you care if it is a Cartesian product? What is the query to go for?
  For the purposes of debugging, you can include something that you see in the SELECT clause.

• Need a bit of clarification here...

  Hi, I was wondering if my machine 9210 M52 Thinkcentre (Small Form Factor) could support the Intel Core 2 Duo processor, because my Pentium 4 HT is getting old and I am looking for an upgrade.

  I looked somewhere on the lenovo/IBM site and it says somewhere that the computer is capable of managing the Core 2 Duo. Then I looked on several forums, ask questions about the compatibiltiy with the processor, and they said that it was not possible. I also looked on the Intel site and it also sets out the motherboard and chipset is not compatible... what I need someone to actually clarfiy is that it can or can not handle the Core 2 Duo.

  Data sheet:

  Motherboard: Thinkcentre M52 - Socket LGA 775 3.3 Rev

  Chipset: Intel 945G Express Chipset Family

  Thank you

  EDIT:

  In fact, I read the page on the M52 detailed specifications and he registered the Pentium D taken processor supported higher... but the chipset CAN support the Core 2 Duo?

  Check these:

  http://www.Intel.com/products/desktop/chipsets/945g/945g-overview.htm

  http://www.digit-life.com/articles3/mainboard/Foxconn-945g7ad-8EKRS2H-i945g.html

  Format of different plug and voltage, you have to replace the whole motherboard for possible upgrade.

• Post a message (need for clarification)

  Hi all
  This is going to be a long post, because I want to give good background.

  I wrote a message on the cancellation of the automatic updates. Here, it is pasted:

  "I have an old HP Pavilion dv7-4180us Notebook PC using Windows 7 Home Premium. It seems that I can never stop automatic updates. There is a problem.
  On the one hand, we are informed to install updates to keep our machines running well, up-to-date, to increase security. But I found that when these control sooner or later my computer, that my device is malfunctioning and I have to run the system restore.

  QUESTION: how to cancel - once for all - automatic updates all the?
  QUESTION2: How do you know which programs are bad operating system and are necessary?

  The damage has been done is usually a bad slowdown in operations. Start-up takes longer, opening files is slower, and I got an impossibility to open my system thanks to the fingerprint recognition.
  About me:
  -00359 - 899 2687 OEM product ID - processor: Intel (R) Core (TM); 5 UC; M 460 @ 2.53 GHz
  -Memory (RAM) installed 4.00 GB - system Type: 64-bit operating system
  -Prod. No.: XG834UA #ABA
  All comments welcome. Thank you. »

  (end of my first message block)

  A response has been sent by a peer:
  He pasted my original message in the upper part of his, then added the comment below. I have stick.

  "Windows updates are updates most of the time required of course there are glitches but then you must restore to the last frame of work and try to update again." Constant updates is a good indicator of your operating system is corrupted and you need for your system back to factory recovery install and update again.
  -First follow help links.
  Do not know how to display help click on the following link.
  First time here? Learn how to post and more
  -For disk recovery only.
  Get a HP USB recovery or HP recovery disc drive
  Read this before ordering your recovery discs! (United States and Canada only)
  Don't PM me if you do not allow PM in return. »
  (end of message from One Peer, glued)

  I tried to send a response to a peer. I clicked on the button "Answer" in the bottom right of his message, but my answer is back to my original thread. The 1st link in the message is 'Learn to use the forum.' It is said (stuck),

  A brief subject title including:
  • Name of the product
  • A brief description of the problem
  • A detailed message with the following information:
  o name of the product and operating system
  o How do I find my product name and number?
  o Description of the problem, including:
  o error messages, if applicable
  o changes to your system until the problem occurred
  o do not include the serial number of the product or personal information.
  (end of dough)

  With this link, I guess that a counterpart found my original post did not argue correctly. BUT: I entered the information about the product. on my first line and below the o/s. According to info. the link, I did everything that I need.

  QUESTION: was my insufficient message following protocol?

  Approved One also said in his message, (quote is pasted): ' don't not PM me if you do not allow PM in return '.
  In my attempt at a peer response, I wrote (pasted below).

  "Your last comment, ' Don't PM me..." If you do not have... "
  Could you explain that? Do you have I have somewhere a "PM" option for answering machines cannot delete "PM" me? Not to my knowledge. Finally, please be so kind as to explain what is "PM". "(end of dough)

  QUESTION: given that my answer to the q. above might not have reached a counterpart, can someone pls. specify what is "PM"?

  Another issue is the link 'Learn to use... forum.' A link on this link goes to "" tips ask the ' very best Question. "» "I opened that and saw this picture:

  

  In the image is "CNF". It's a serial number. Confusion which is on the first link "learn... use... forum", it is said, 'Do not understand the serial number of the product, or any personal information'.
  Please clarify this discrepancy, betw the statement and the image.

  LAST QUESTION: want to post this message, I thought that it wasn't on laptops, then search "HP Expert Forum. However, under "Choose a Board" has a long list, then "Show all" and "HP Expert Forum" comes. However, by clicking on it, I can't see in the empty bar where I need to place it. What I am doing wrong?

  Please follow the long message. All responses appreciated.

  AtAF

  I can't answer all your concerns. I will try to answer some of your questions and give you some places to look for answers.

  ---------------------------------------------------------------------------------------------------------------

  P.m.s are Messages private, somewhat like a mail between posters, but always using the guidelines and the presentation of the general forum.  In general, most people have this feature enabled.   I have impossible (not) comment in particular on the use of any Expert of the service.

  More information: How to send a private Message

  ---------------------------------------------------------------------------------------------------------------

  The bit about Product Information reminded members do not provide the serial number of their computer.  People post their serial numbers, their send addresses, same numbers on occasion.  It is an invitation only and we strongly advise anyone to publish personal information on this public Web site.

  ============================================================================

  Windows updates

  Everyone has an opinion about updates.  On a Windows 7 system, the need for updates - once the system is installed and the main updates are installed, AND assuming that it does not install no matter what additional programs or software - is mainly to preserve the system of some security problems are hiding everything.

  If you want to turn off Windows updates, then do it.  You are the admin.  It is your machine that is at risk - or not - and it is your decision to make.

  You can switch automatic updates / stop in

  Control Panel > set view icon > Windows Updates > settings

  Windows updates - turn auto update or disable

  ============================================================================

  Essential programs

  As a general rule, you must the programs running on the computer when it starts up which are included in the list of programs in the system and Microsoft programs in your startup file configuration list.

  How to use MSCONFIG in Windows 7

  Note the general Word - depending on what you have installed on your computer, your boot file can be filled with, well, an interesting range of programs that can indeed have slowed down the performance of your system over time.   Yet once, however, most of the programs - unless they are poorly written, or you forced them into the startup sequence when they belong there – are not by themselves slowing down the system by law "to be in the startup list.  In other words, you might consider doing some homework before snatching the programs in this list.

  ============================================================================

  -Comment-

  Your computer contains only 4 GB of RAM and he is older; We say "vintage".  This is not to start with a lot of resources and Windows 7 can, in itself, consume a lot of what is available.  Windows 7 is greedy.

  Add a gourmet operating system, a file system (perhaps) fragmented, a couple of badly written programs (bad code), less fast blazing to the Internet, and you might have the recipe for a slow computer.  I'm not saying that your computer is under one of these weaknesses, only that many computers don't have these problems.

  -------------------------------------------------------------------------------------------------------------

  Resource monitor

  Resource hogs could be traced using the resource monitor.  Even on Windows 7, the tool is pretty sophisticated. You can spend time learning how to use it effectively.  However, the program is very effective to help you quickly catch programs that are hogging resources (memory and network, for example) that you have available.  For example, if you have a program that took all the memory and ran Amok, so to speak, the monitor will be able to quickly show what offending program to the wrongdoer.  In most cases, you can kill the culprit (identify, right-click > kill).  If you trash your system and really hang things up, press the power button and accident-shut down the computer.  You really want to do it very often. but every Admin has made at least once a clearing.

  -------------------------------------------------------------------------------------------------------------

  Maintenance

  If the system is corrupted due to lack of maintenance, then you can provide this service by giving him some of the attention, he needs without actually going and perform a complete restore.  (Shudder).    Good maintenance, especially on a vintage with a limited capacity system helps the computer make the best use of its resources.

  Good care tips can be found here:

  Improving the performance of the system without adding memory (Windows 7)

  -------------------------------------------------------------------------------------------------------------

  Fingerprint login

  After that all other maintenance was performed, it is possible that the following might help to restore the connection of fingerprints.  Understand that I have NOT used digital personal in a certain number of years and this is a quick overview of the subject.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect
  • Reinstall your driver validity sensor:

  validity sensor Driver V2.1.0.2 RevA Win7 sp52354

  • Restart the computer and log in
  • (Re) Install the Digital Persona software

  sp50048 Digital Persona Fingerprint Reader Software V5.1.0.175 Rev A

  At this point, I restart the computer once more and sign in, although this software is so robust that you could get away with jumping final restart.

  Reference:

  HP Pavilion dv7-4180us Entertainment Notebook PC Drivers

  -------------------------------------------------------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!