vSphere 4.0U2 to 4.1U1 with the SSL certificate has expired?

Similar Questions

• Error message: "the security certificate has expired or not valid" when signing into emails

  original title: it is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  It is message apear signin to my email (the security certificate is expired or not valid) my windos xp professional version - what can I do

  Chances are that your system clock is bad - check your regional settings in the control panel and make sure that your region, time, date, and year are correctly configured.

• SSL certificate has expired for the endpoints BlackBerry push last Thursday!

  There is a generic cert used for endpoints BlackBerry push Eval expired last Thursday.  My embed code for the push service is the appropriate certificate validation and can no longer send.  I checked several end points of cpNNNN.pushapi.eval.blackberry.com and they all share the same expired SSL server cert (no wonder they are shared, surprisingly it is expired).

  To test:

  OpenSSL s_client-connect cp4714.pushapi.eval.blackberry.com:443

  Expansion: NO
  SSL-Session:
  Protocol: TLSv1.2
  Encryption: RC4 - SHA
  Session ID:
  Session-ID-ctx:
  Master-Key: E6D069A6416C5672A99B5D7FA4482190D03E9E14985FE2EB33AF51C580151200490CB06874412C62DAA945A35EA2BE22
  Key - Arg: no
  Krb5 main: no
  PSK identity: None
  PSK identity hint: None
  Start time: 1402341727
  Timeout: 300 (s)
  Check the return code: 10 (certificate expired)

  Cert server returned:

  Certificate:
  Data :
  Version: 3 (0x2)
  Serial number:
  5b: 49:CB:40:09:A7:D3:FB:72:F2:EE:4 b: 97:39:28:47
  Signature algorithm: sha1WithRSAEncryption
  Issuer: C = US, O is Thawte, Inc., CN is Thawte SSL CA
  Validity
  Not before: Jun 5 00:00:00 GMT 2013
  Not after: June 5, 23:59:59 GMT 2014
  Subject: C = CA, ST = Ontario, L = Waterloo, O = Research In Motion Limited, OU = IT, CN is *. pushapi.eval.blackberry.com

  ETA on when a new server certificate will be installed on endpoints pushapi.eval.blackberry.com?

  Seems now fixed.  New certificates of June 11 00:00:00 GMT through 11 Jun 23:59:59 GMT 2014 2015 are in place.

• SSL certificate has expired for the Push Service

  I just tried to connect to the push with url notification service

  This should be set to this day.  Thanks again for letting know us.

• How can I get Firefox re - check the websites ssl certificate? It gives me a message saying that my site's ssl certificate is expired at the time where it is not.

  My side ssl certificate has expired, but it was renewed a few days later. For more than a month it was renewed, but I still have Firefox users, the error of statement.

  This connection is Untrusted
  Technical details:
  Eng.fanpageengine.com uses an invalid security certificate.
  The certificate expired on 31/01/2013 15:59.

  This is a link to a 3rd party site that verifies that the ssl certificate is current.
  http://www.Networking4all.com/en/support/tools/site+check/report/?FQDN=HTTPS%3A%2f%2Feng.fanpageengine.com & Protocol = https

  I need the steps they will need to do Firefix update of its registration.

  Additional information.
  This isn't the effect everyone visiting my website using Firefox. It does seem that effect people who visited the site, although the ssl certificate has expired. However the clearing the cache and cookies have no effect.

  Thanks for the help.

  Thanks for all the help. I found a solution. =)

  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

• Replacement of the SSL certificate in vCenter Server Heartbeat with a new certificate

  Realized the SSL certificates on my vsphere vCenter Server 5.5 environment change, but now I'm looking to deploy vmware vCenter Server HeartBeat service, but I have the following doubts.

  1. it is necessary to perform the exchange of currently used SSL certificate in my environment. ()http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2013041( )

  KB article talking about amendment of the certificate of a vCenter Server Heartbeat deployed... If the vCSHB are not deployed and yet, you don't need to worry... just go ahead with the installation and the new vCenter server certificate will be recognized by vCSHB.

• Add-PSSnapin: an element with the same key has already been added

  When you run Add-PSSnapin, I get the above error. This seems to happen if I try to add the snap a second time, but when this happens, none of the power CLI commands are then available up to what the server is restarted.

  Add-PSSnapin: an element with the same key has already been added.

  At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  + Add-PSSnapin $SnapinName;

  +     ~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [Add-PSSnapin], ArgumentExcept)

  ion

  + FullyQualifiedErrorId: System.ArgumentException, Microsoft.PowerShell.Co

  mmands. AddPSSnapinCommand

  Failure of the attempts to remove the snap-in at this point with:

  Remove-PSSnapin: no Windows PowerShell snap-ins for the model

  "VmWare.VimAutomation.Core" were found. Check the pattern and then try the

  command again.

  At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\

  + Remove-PSSnapin $SnapinName;

  +     ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidArgument: (VmWare.VimAutomation.Core:Stri

  NG) [Remove-PSSnapin], PSArgumentException

  + FullyQualifiedErrorId: NoPSSnapInsFound, Microsoft.PowerShell.Commands.R

  emovePSSnapinCommand

  I already tried to uninstall the dll and put it back, that makes no difference

  $dllpath = "C:\Program Files (x 86) \Vmware\Infrastructure\vSphere PowerCLI\VMWare.VimAutomation.VICore.Cmdlets.dll.

  $SnapinName = "VmWare.VimAutomation.Core".

  #get the path to instalutil

  $path = [System.Runtime.InteropServices.RuntimeEnvironment]::GetRuntimeDirectory();

  #create an alise for installtuil

  set-alias installutil (resolve-path (join-path $path 'installutil.exe'));

  #uninstall snap

  InstallUtil /u $dllpath;

  InstallUtil $dllpath;

  I tried appdomain unloading, then adding the snap-in with the same result:

  $appdomain = [AppDomain]: CurrentDomain

  $appdomain. # Of unloading | Out-Null

  Add-PSSnapin "VMware.VimAutomation.Core".

  $appdomain. Load

  Everything simply jump beyond the error is not good because it is impossible to find the following commands:

  Add-PSSnapin "VMware.VimAutomation.Core" - ErrorAction SilentlyContinue

  Get - VM $VirtualMachine

  The term 'Get - VM' is not recognized as the name of a cmdlet, function, script file, or an executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  Any help to fix this would be greatly appreciated.

  Thank you

  OK, I was kind of what went wrong here.

  The snap has been loaded from a powershell module. When the module is removed and added again, the snap ceases to function, but also can not be added again.

  If the snap is loaded first outside the module everything works fine until you try never to remove or add snap-in module.

• PowerCLI - an element with the same key has already been added ERROR

  Hello

  I opened a case with VMware on a problem using PowerCLI. And pretty well, they said that they do not support scripts... But the error is not related to any script. It is related to the first command I run against one of our Vcenter and we have 6 of them.

  Everything worked well until we went from 4.1 to 5.1

  I can connect to our VCenter fine, but the first command always give an error and fail to the powercli but the task still occur in vCenter.

  When it gets ugly, is we have several powershell script to maintain and automate our environment but now these script fail.

  Example, we have a script to deploy the VM model and then configure the appropriate hardware configuration and add Notes and custom attributes. But the script fails after that deployment so the rest will not run. It will be possible that deploy us to the first virtual machine.

  So for 'Band-aid' question, I added a line to my script to start a virtual dummy machine, to make sure that what is in the script will work fine.

  Error:

  PowerCLI C:\Program Files\VMware\Infrastructure\vSphere PowerCLI > start-vm vm - Server-m46

  Start-VM: 2013/06/26 11:57:05 Start-VM an element with the same key has already been added.

  Online: 1 character: 9 + start-vm < < < <-vm server-m46 + CategoryInfo: NotSpecified: (:)) [start-VM], ViError + FullyQualifiedErrorId: Client20_VMServiceImpl_StartVM_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.StartVM)

  As far as I know, done to the PowerCLI VMware supports.

  I don't think they support the client script debugging, but the product PowerCLI itself is supported.

  I created a few calls myself in the past.

  What you see is a known problem, there are a few discussions in this community who has something similar.

• Cannot save vSphere Web Client after the replacement of the SSL certificate

  Hi all

  I have followed the Articles of Derek Seaman on the replacement of all the certificates in vSphere 5.1 and have since turned to the VMware KB Articles. I replaced the certificates for the SSO, the inventory Service and vCenter Server with no problems (other than having to use OpenSSL-Win64 for vCenter certificate that I could not get the x 86 version certificate of work, makes no sense, but I'll take the small victory).

  If you follow the guide of vmware to replace the web service certificate, http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2035010, I get to step 12, enter the VMware vSphere Client Web back to vCenter Single Sign On and the following error:

  ##########################

  D:\Program Files\VMware\Infrastructure\vSphereWebClient\SsoRegTool > regTool.cmd registerService - cert "C:\ProgramData\VMware\vSphere Web Client\ssl" - ls - url ( https://(Server URL): 7444/lookupservice/sdk - username admin@system-domain - password (password) - dir 'D:\Program Files\VMware\Infrastructure\vSphereWebClient\SsoRegTool\sso_conf' - ip "*." ' * ' - serviceId-file 'D:\Program Files\VMware\Infrastructure\vSphereWebClient\serviceId'

  No file properties not found
  Initialization of provider of record...
  SSL certificates for https://vsphere.au.ray.com:7444/lookupservice/sdk
  SSL certificates for https://vsphere.au.ray.com:7444 / sso-adminserver/sdk
  Unhandled exception trying to escape: null
  Return code is: OperationFailed
  100

  ##########################

  VMware technical support suggested I uninstall all components, delete all databases and try again. I have done this and have exactly the same result.

  Has anyone seen elsewhere or managed to solve?

  Chris

  So, I managed to solve this problem. Not sure that this applies to everyone, but my problem was caused by registering using among other names of the subject in the SSL certificate for the SSO rather than the common name of the certificate.

  For example, the server name is server1.company.com. It is the common name of the certificate. But one of SAN of the certificate has been "vSphere.company.com".  If I used this other name in one of the component records that they would fail. I found that I have to use the common name. Even if the alternative names of job access to via your browser web, there is no certificate warning, if the registration of components using these names, it would fail.

  It seems crazy that you can use any of the San... then why allow us to make?

  Initially, I tried to replace the authentication certificate ONLY when the town was called vsphere.company.com, rather than the hostname of the server, and which is installed. However, try to install the Web Client would fail. When you come to the step where you have to accept the certificate of SSO, the installation fails because the common name of the certificate does not have the host name of the SSO server. It seems insane to me... why the host name of the server running the SSO should still come in when all calls are over HTTPS is simply absurd!

  I confirmed this with VMware Technical Support and they checked my conclusions.

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Satellite A40 - attention: problem with the cooling system has been detected.

  Hello guys,.

  From time to time, I get the following message is displayed:

  WARNING: a problem with the cooling system has been detected Toshiba
  Please turn off computer immediately and return it for service.

  I have Windows XP on it.
  I opened the cooling fan and clean it. Of course, I found it dirty rally.
  But still, I get this message!
  What should I do?
  I live in Northern Germany.

  Any advice is welcome and thanks in advance.

  Ibrahim

  Hello

  The message says it all!
  In this case you should contact the service provider authorized in your country!

  > I opened the cooling fan and clean it. Of course, I found it dirty rally.
  Eventually, the cooling modules don t like needs and that is why the message again!

  Nothing to my friend... you need help laptop technician

• Satellite C660D - a problem with the cooling system has been detected

  My laptop is a * Toshiba Satellite C660D-11th * and I have a message that keeps coming up every once in a while 'alert system' head and reads as follows: "WARNING: a problem with the cooling system has been detected." (Next line) Please, turn off computer immediately and return it for service. »

  I had this warning for the coming weeks and it tolerated, but it worsened and annoyed me for the last time. I can hear the fan and the computer is not over heating (the CPUCool freeware tool detects a 51º CPU temprature C). No further questions arise as the computer slows down, it is right in the path of what I do, like typing right now.

  I tried to solve the problem by changing the "Power Options" in the control panel of Windows 7 'High Performance', and then selected under the 'battery' both 'Sector' columns, 'Never' for the parameter "put the computer to sleep. It seems to work, and no error message has occurred since then. However, this is not a solution...

  Please help quickly, this prevents me from working and even other things now.

  Thank you

  Hello

  Usually, this message would appear if something is not wrong with the cooling system. But I read here in the forum that maybe it's a bug of software and after new system recovery this message should no longer appear.

  But if you notice some upper temperature or abnormal noises, then I recommend to check this with a service technician

• TCP on PC server with the network interface has 2

  If I need to create a TCP on PC server with the network interface has 2 with a different IP address, for example 192... and 172... and the IP address of the client side is 192..., is there something I need to take care.

  Any suggestion, thank you.

  No, by default the server listens on all interfaces.