vSphere 5.5: network with Server Intel S3000AH map problem

Similar Questions

• Groups on a joint network with Server 2003, Windows 7 and XP

  I have a network of small business running off an old server running Windows server 2003.  The workstations are 7 machines of Windows 7 and XP 3.  I would set up a group to easily share files not related to the common programme currently running on the server as well as share printers more easily, but have een advised by an "expert" do not do, as it network program (medical office) my will suffer. Including the old labels dymo and lexmark printer sharing is a pain though it might be easier thanks to the homegroup.  I should have updated the drivers on all computers by using the printers or only those connected via usb? If I need to change the workgroup name? I know that XP machines cannot participate in the home group, but we can work around this problem.

  The bottom line is that homegroup can be used with Windows 7 computers. You must set up a joint working group to share files/printers between the XP Win 7 machines. Insofar as the server running W2K3 domain?

  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  For W2K3 networks I suggest posting on the TechNet forums...

  http://social.technet.Microsoft.com/forums/en/winserverPN/threads

• Windows 98 network with Server 2008 R2 foundation

  I installed a Server 2008 R2 Foundation in mode working group. Everything works fine with XP Pro & home customers, profiles/passwords common user have been implemented on all computers. When I try to connect a drive on Win98, I get the error of $ IPC requesting a password. And of course no password I used doesn't do the job.

  Any ideas on what to try?

  Hello

  Your Windows 7 is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Network with the MacBook Pro 15 "problems

  My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

  2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

  Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

  the company's programs, but I mainly work on the Mac side.

  An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

  I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

  Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

  Thanks for all the wisdom and strategies.  Maggie2012

  Hello maggie2012,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards

• Network with DSL and wireless setup problem

  I use two number of script and lan proxy... NW its Internet connects only via script... no more connection with lan numbaer, I checked dsl. the amount of the fine... Help, please... also

  Give me some advice on, dsl, wireless configuraion in switches

  Kind regards

  Mohammed

  Used Google...

  http://www.Google.com/#hl=en&&SA=X&EI=gbX-TJTwBsWclgfevL29CA&SQI=2&ved=0CBMQvwUoAQ&q=DSL+, + wireless + configuration + in + switches & spell = 1 & fp = e18ec2db23988f7d

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Network with the new Vostro 410 problem

  I just got a new Dell Vostro 410, running XP Pro, to replace a 2400 Dimension 5 - years, which had been connected to my DSL ATT line via ethernet through a 2Wire 1800 HG. My laptop and two other offices (which is the replaced 2400) is connected through wireless cards or adapters. Three wireless computers came online immediately, get internet access and work very well.  All computers are running XP.

  The problem is that I can't access the Vostro or its USB printers through computers connected wirelessly that could print previously via the cable 2400. They do not appear and are accessible on the Vostro and the Vostro appears in the Working Group, but not belong to network on the other three.

  I tried to redo the Network Wizard, but I'm having no luck at all.

  Any suggestions would be greatly appreciated.

  Ron

  Message edited by RS2 on 09/23/2008 11:55
  
  

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Connect two VSphere ESXi 5.0 with crossover cable

  Hi all! A newbie in the ESXi 5.0

  I configured both servers of VSphere ESXi 5.0 with two network adapters on each server, the first NETWORK card acts as a virtual Internet switch, and the other NETWORK adapter serves only the link of communication (Heartbeat) between two VSphere Esxi 5.0 using crossover cable.

  My question is, how can I create such change in VSphere in a problem of communication between these 2 servers with a crossover cable? I would like to connect my (CentOS 6) VMs on each server via this network adapter with cable modem Simulator for the purposes of the communication of pulsation. I know how to create a normal vSwitch who can communicate with the Internet, but I have no idea how to create a switch for the NICs connected with a crossover cable.

  Please drop me a line if you know how.

  P.S. The idea to use the crossover cable rather than use the simple ethernet cable is the cable eliminates the overhead and to avoid the lack of packages due to the processing time of the switch.

  I know not how to create one with ordinary vSwitch to establish a connection with the Internet, but not this vSwitch with crossover cable.

  There is no difference. Build a vSwitch as your normally would, including the NETWORK card that is connected via a crossover as your uplink cable.

• another network with my Ip address?

  A message appeared saying: "another network has the same IP as this PC, I checked the network administrator and conducted an audit and found no problems.

  I also checked for antivirus updates and no problems were found. I recently signed up for Yahoo. This has something to do with the IP address?

  Hello Silvia,.

  I don't see how to sign up for Yahoo this would cause.  Although this is stated in the reference below, it is IMPOSSIBLE to have two identical IP addresses on the internet.  There are sometimes common sense as well as the technical reasons for this. You can read or skip to the next section you choose covering some basic concepts of networking that can help as I don't know where you are in terms of networking knowledge. This could be much too basic or even above your head.  The answer to your question follows this section with an article that will probably the thing and then a search for related sites that cover this problem if this article isn't enough.

  ******************************************************************

  It is a phenomenon of local network because all local networks use one of three ranges for the allocation of addresses TCP/IP based on the number of computers should be connected.  For home use, it is usually begins with 192.168. and two other numbers that are limited by a set of rules.  Most people use 192.168.000.001 (or which is written 192.168.0.1 as address of the router (or gateway) and the local DHCP server, Server DNS and WINS Server (often assigned and controlled by the router, but sometimes by a computer instead for various reasons).  Then network (DHCP server) Configuration is used to assign a range of acceptable numbers for computers that use this number.

  Most people allow these numbers are dymically assigned by the DHCP server to keep things simple - so that a specific computer may change from time to time.  Some devices need an assigned static address (which is reserved for this device which always uses and nothing else is never assigned it on this network because two that are the same on the same network would have caused a problem such that the communication would not have an idea that you choose if selected).  An example might be a stand-alone network printer where the configuration of the printer on any computer using it could be a nightmare if not to change the address of the printer and that nobody was able to connect to it - then it becomes static and then all computers use this address and since it never changes which avoids printer problems.  Another example is the above router other than the same problems occur whenever the computers tried to connect to the internet or connect to what be it through the router.

  Now, if you have two LANs linked together, a problem starts to appear as both may have been implemented with the same philosophy and therefore likely to use the same numbers.  This is often done using a network http://www.ehow.com/how_5329107_use-router-bridge-two-networks.html bridge or can be done through complex subnets creation of each network (more complicated).

  For the more (and perhaps even to understand that, you need to understand the basics of networks.)  Here's a search to find some one who can help you get started: http://www.bing.com/search?q=networking%20basics%20tutorial&PQ=Networking%20basics%20&SP=2&QS=AS&SK=AS1&sc=16-26&form=BSRTSS&pc=BBSR.

  *******************************************************************

  Please see http://answers.microsoft.com/en-us/windows/forum/windows_other-networking/another-computor-is-using-same-ip-adress-as-my/84f10eec-9ff4-4d40-8867-392422367026 which should help explain some things about it (and even if in a forum of Vista, most if not all of it applies to networks in general - so don't worry that).

  Learn more (a lot more, actually) on both computers with the same ip address, see the following Bing search which will give you plenty of resources for this, why and how it happens and what to do when it comes to solving things: http://www.bing.com/search?q=two%20computers%20with%20same%20ip%20address&PQ=two%20computes%20with%20&SP=1&QS=SC&SK=&sc=16-34&form=BSRTSS&pc=BBSR.

  I hope this helps.

  Good luck!

  Kosh

• several devices on the network with the same name

  I want to install Windows 7 OS computers on a domain with Small Business SERVER 2003.  Curiously, I see all the computers on the network, where I should be able to, but one of them WK02011, is not accessible from all Windows 7 systems because there are multiple devices with the same name on the network according to a diagnosticn check.  WK02011 is visible and accessible from other systems on the network that are runjning XP OS.  There is only one device named WK02011 on the network.  I don't have this problem with any other XP system - that is - I can see and access all of the other XP machines on the network with the exception of WK02011.  I can't access WK2011 from the server and the server indicates that it is multiple devices with the same ID.  Rename the XP would be complicated because of having to re - set up the service to the customer and then turn around and install 7 OS in the workstation in the coming days.

  How to find the ghost device double?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows 7 on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Creation of network with accounts

  I want to create a network with computers running Windows operating systems. I have a wiorkgroup. Is it possible to do where I can create user accounts that can be connected through all the computers on the network? In my school, they have where they can disable any account at any time. They have something like shared files, but there are all these files that are not saved on the directory of files shared from any computer.

  Hello

  Yes, in general a network like what you describe requires a server.

  I would say that sticking with the Working Group is your best option to connect two computers to a home network, or more. With a shared folder or two, you should be able to do all the work in network, you will need.

• Problem with Server 2003 gpedit.msc changing wallpaper

  Hi, I have a small network of computers that I want to apply a group policy to modify their current context.

  However after following previous questions tips and sites etc I found no correct solution of some model policies not appearing as / administrative / office.

  I don't know any network has never treated networks wireless on small networks with no strategy of setting admin laymens terms would be useful - thanks

  Ben

  Hi Ben,

  Because the question you posted is linked with the background screen with Server 2003 gpedit.msc change, it would be better suited in the Technet Windows network. Please post your question in the following TechNet group policy forum:

  http://social.technet.Microsoft.com/forums/en/winserverGP/threads

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Unexpected error" occurs when you try to create a network with a security profile wpa/wpa2 enterprise

  I recently started using Windows 7 x 64 and I'm unable to create a network with WPA2 - Enterprise Security profile.  I have a wireless card for Intel PRO/Wireless 3945ABG with 13.0.0.107 driver version.  I have had no trouble to create this network in Vista Ultimate x 86 profile, and I do not know what is causing the error.

  I went through the steps to create a network profile:
  1 'Add' a network profile
  2 ' manually create a network profile '.
  3 name the profile, and then select WPA2 - Enterprise with AES encryption

  When I click on 'Next' to complete the configuration of the profile I just get a message that says:
  "An unexpected error has occurred."

  Has anyone experience the same problem?

  Thanks to another post and help Orgwizard, followed it to Symantec Endpoint Protection. I had emigrated from laptops using the Easy Transfer Wizard and did not reinstall MS and sought instead to Microsoft Security Essentials. MSE deleted and reinstalled MS and everything is fine now!

• Conflicts of addsess IP in Windows 7, error "There is another device on the network with the same IP address".

  Conflicts of addsess title: original win 7 IP

  I just bought a used laptop, it has been deleted I made it mine I addminastrater pc name willards pc and whatnot, but I continue banging off the internet because address conflict IP said that there is a nother design on network with my address, I don't know how fix it can you please help me?

  Hi Willard,

  Please contact Microsoft Community. I've surely you will help solve this problem.

  This problem could occur due to incorrect parameters TCP\IP.

  Try the steps listed here:

  Method 1:

  I suggest you to reset TCP\IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  https://support.Microsoft.com/en-us/KB/299357

  Method 2:
  If the problem persists, I suggest you try the following steps to flush the DNS and request a new IP address of the server of your ISP. Check if it helps.

  1. Cclick on Start and type cmd in start search.
  2. Right click on command prompt run , then selectas administrator.
  3. At the command prompt, type the following commands and press enter after each command.

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  output

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Control access to the network with ACS device

  Hi all!

  I currently have in place an Appliance, Cisco Secure ACS using Windows as main server authentication. Cisco Secure acts as a GANYMEDE server +. I have two groups defined in Cisco Secure: Netadmins and security ITD. Users of the Netadmins group need access to all switches and routers on the network. ITD security must only access async line 53 on a router 2611 for a band of a firewall and no other access to all network devices offline. How can I limit access to the Cisco Secure security ITD group to line 53 only?

  My current config on this router is:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  connection ITDSEC authentication group Ganymede + line of AAA.

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  line 53

  No exec

  authentication of the connection ITDSEC

  transport of entry all

  StopBits 1

  Speed 115200

  line vty 0 4

  exec-timeout 30 0

  login timeout 120 response

  login authentication netadmins

  but users in the ITD security can still access by vty and then reverse telnet to any asynchronous line on the router. In addition, security ITD always access any switch or router using telnet: what should be my setup on these devices? I do an ACS configuration?

  All other devices:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  Line con 0

  password 7 141C015C5806

  login authentication netadmins

  line vty 0 4

  password 7 11020A 524310

  login authentication netadmins

  line vty 5 15

  password 7 11020A 524310

  login authentication netadmins

  Any help will be greatly appreciated.

  Hello

  In the security group, I would create a Restriction of access to IP network with an entry permit. Essentially to allow access to the single port on 2611 only.

  The AAA Client field is the name that you gave to the 2611 in the network config. Address will be * unless you want to restrict access to the ip or address. Port... never quite sure with async if the port value must be "async 53" or "line 53".

  If you look in the pass/fail for the nas-port attribute, you'll see what that T + sends to the ACS. This should help you know what to put in the NAR.

  Mounira