vSphere Client display language VI

Similar Questions

• vSphere Client displays VM Annotations incorrectly

  In the vSphere client, I clicked on a virtual machine and then click the Summary tab and added an annotation for this virtual machine.  Then I clicked on a different virtual machine, and the same annotation text appeared. I click on different virtual machines, it seems that the text of the Annotation isn't get updated until I click a virtual machine running, or (b) a virtual machine that has the text of the non-empty Annotation of its own.  It was using vSphere Client connected to a server vCenter 4.1.0 4.1.0.

  Is this a known issue? Or am I doing something stupid? Is it possible to get the vSphere Client to display the current, correct the Annotation text for the virtual machine that is currently selected?

  Thank you.

  For guests, the update 1 build is 348481 for vCenter Server and the Client is 345043 vSphere.

  Basically, I think the question was, that in the earlier version the annotation entry in the vmx file was not created by default. With the newer versions, the entry is created with an empty value (""). If at least workaround should solve the problem.

  André

• How to change the display language for vsphere client from the web?

  Hi all

  I would like to know how to change the display language for vsphere client from the web?

  help please, thank you!

  Take a look at http://blogs.vmware.com/vsphere/2012/10/the-vsphere-web-client-and-localization.html to see which languages are available and how to change the URL.

  André

• vSphere client does not display does not import an option of the machine when it is connected to vCenter

  Hello

  I just got a new PC and installed all my applications, but the vSphere client does not show the import, an option of the machine when it is connected to vCenter, ideas, why not?

  Thank you

  Hello

  Hello from the Canada

  You must install the converter Plugin into your new PC

  Go to Plugins, then install the converter one.

  Concerning

• Cisco HX system connection vSphere Client Web show error internal

  I've been recently install HX system version 1.7.3 finishing

  and connect on vSphere Web Client display error - internal

  Could not load the module on /vshpere-client/pluginui/locales/StorvisorUi-zh_TW.swf resources

  Version of vCenter is 6.0U2

  Is - this mean no Chinese tranditional support?

  stanleychou,

  Have you you successfully to redeploy your 1.7.3 cluster HX?

  There is little cleanup that needed to be done in vCenter to erase the old information before re - deploy - such as remove the plugin the vCenter MOB and removal of the old cluster cluster HX

• Cannot connect my vsphere client to manage my host... pls help!

  Thank you for reading... I'm new to esxi 5.1 and inherit a T110 Dell running a HD-250 GB for the OS (Esxi and Server 2008 r2) and 2-1 TB H.D for mirrow to SHARE DATA with the Microsoft software... (what a waste ah)

  everything was fine until about 2 weeks that I'm unable to connect to manage the server, it gives me the error:

  VSphere client could not connect to "IP address"

  A unknown connection error has occurred. (The client may not send a request to the server. (La connexion sous-jacente a été fermée: une erreur inattendue s'est produite sur un envoi.))

  If I point the browser to the IP Address of the host as: https://hostip (the page cannot be display)

  -Windows server is running

  -i can ping the Esxi

  Problem is that I have to update the memory and I'm afraid that after I have does not connect... and then I'm in big trouble... because I hand turned on inside the Esxi server.

  I did not backup, but the person in front of me was not do backups with veeam... instead they used a regular backup of windows on a USB software... I tried to create a re-usable collection and of course does not work... He was asking for a driver... I think it was for the hard drive... I free veeam now... but I can't connect it either... the box of Esxi.

  I would be grateful for any suggestion... Thanks in advance.

  You have access to the T110 Dell physical console?  Can you sign here?  If so, you could restart management agents:

  VMware KB: Restarting management on an ESX or ESXi host agents

  You can also enable the shell that allows you to try all kinds of connectivity tests:

  VMware KB: Using ESXi Shell in ESXi 5.x

  Connectivity tests:

  VMware KB: Troubleshooting network and TCP/UDP port on ESX/ESXi connectivity problems

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• VSphere client light web - cannot select boot from ISO via the CD/DVD drive

  I had used P2v to virtualize a Windows 7 machine and after the start he said that the "the boot selection failed because a required device is inaccessible. I think I need to run a repair using Windows 7 image and possibly launch a fixboot and fixmbr, but when I try to adjust the settings of the virtual machine using the web client to boot from the ISO it displays an error and the ok button to save the settings is grayed out. How is it doesn't let me do this?

  Never mind. I got the VM running in Vsphere client while trying to change the setting in the web client.

• vSphere: incorrect display of ability Datastore

  Hello

  Today, a store of data in our virtual environment have a strange problem: incorrect display of ability in view vSphere Client. The correct capacity of the data store is 150 GB normally, but now I see it display 2126950.00TB (?). This issue of data store result in the failure of all virtual machines ran on that. I even worry about this issue because I am facing both of the fist. Please help me!

  Thank you

  This KB is probably can help you: VMware KB: 5.0 ESXi hosts fail to mount VMFS5 volumes that are formatted with TTY capabilities only.

  --

  Rocco Sicilia

• Unable to connect to new ESXi 5.5 with vSphere Client hosts

  Completed the new installation of ESXi 5.5 on two new Dell PowerEdge servers last night.

  Trying to connect to them through the vSphere client fails.

  I can ping both servers without any problems from the server where the vSphere client is installed (it is not a domain controller but a Windows 2003 server - it has not .net 3.5 SP1 is installed).

  If I try to open the IP address of the host in a web browser http://xxx.xxx.xxx.xxx expires, however, if I try http://xxx.xxx.xxx.xxx:902 It connects to the server, but rather than get the web page, I'm used to waiting with 5.1 I get this message:

  "220 VMware authentication daemon Version 1.10: required SSL, ServerDaemonProtocol:SOAP, MKSDisplayProtocol:VNC, VMXARGS taken in charge, taken NFCSSL in charge." I get this exact message even though I have telnet to port 902.  So I know that I can speak to the host, but have no idea why I can't connect to it or they have the tools to display in a web browser. »

  Try to use the same IP address with port 902 in the vSphere client to connect, I get this error:

  vSphere Client could not connect to "xxx.xxx.xxx.xxx".

  A unknown connection error has occurred. (The client received an invalid response from the server. (The server committed a protocol violation. Article = ResponseStatusLine))

  I noticed that there was a lag of 2 hours and 4 minutes between the host server and the client's server.  I have reset the time to match up in the BIOS of the host server.  The test gave the same results.

  Probably unrelated, but throw it out there in case it points to an answer, when executing the "Test management network", ping passes to the default gateway and the DNS server secondary (which is Google 8.8.8.8) but fails for the main DNS (local IP) server and host name resolution is faulty.

  Ideas, help or solution would be much appreciated.  I need to get the network to this customer virtualized this week, and I would prefer not to have to go back to 5.1 if possible.

  Thank you

  Mark Bowker

  This is resolved.

  And it's one of those things that you just kick yourself for.

  I tried this on two servers, Server 2003 and using IE8

  Tested a theory using a VPN to my laptop Windows 8 IE 10 and it has worked perfectly, then tested on a Server 2008 R2 using IE9 and it worked perfectly.

  Installed Chrome on the two Server 2003 servers and worked perfectly.

  So in the end it was IE8 that was not compatible and all the problems at the origin!

  Thanks again to you Andrew for trying to help!

  Mark

  Ed.  In fact, this is the exact reason that it did not work

  5.5 use OpenSSL ciphers and we will not be able to run the 2003 32-bit
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2049143&sliceId=1&docTypeID=DT_KB_1_1&dialogID=47844467&StateID=1%200%2047848621
  There is a fix for 2003 x 64 but not 32-bit

  Post edited by: Mark Bowker

• you see only not lacp in vsphere client web

  I do not see the lacp seting in vsphere client of web

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2034277

  the WIS is 5.1 and the host is 5.1. vCenter is also 5.1

  Nevermind I found it now. Thank you

• Customization of a Windows virtual machine fails - Crush Down vSphere Client

  Hi guys,.

  I met a very delicate problem.

  I tried to customize the Windows VM I cloned from the model (win2008R2), and I simply run the workflow 'Customize vm' in vCO, I think all the settings I gave should be correct (I tried to manually customize the virtual machine by using these settings, and it worked) and there is also no "naming problem" since I followed the rules here : http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2009315

  But once the workflow is started, I saw "customization is underway" in vSphere client, a minute later, this watch:

  

  And then it is reconnected, as if nothing ever happened...

  Anyone will throw some lights on it?

  Thank you very much

  He proved it to be: it seems that I couldn't customize a vm cloned from a template directly.

  I passed the entrance as a virtual machine, the problem disappeared.

  Or there could be something wrong with the model gave me, but my solution is deployed this model first as a virtual machine and clone out that vm for customization later.

  Thank you

• A tree inventory implemented in vSphere client web 5.1 does

  Hello

  I develop a vsphere client 5.1 web plugin.

  I need to implement the inventory tree in my plugin. The documentation guide and programming example speaks on the list of entities as the 'inventory' and not a hierarchical (tree inventory), as shown in the snapshot below.

  I've traveled "vSphere Web Client Extensions for vSphere 5.1 Programming Guide" and samples provided as "chassis-ui", but don't find anything (point/api extension) to view vsphere/custom entities in a hierarchical manner, as seen in vcenter section on the web client.

  Is it possible to display the objects tree in vSphere web client plugin?

  

  No, it is not possible to add your custom in the inventory tree in the left objects.  Our user interface will further hierarchical display of items because it is not scale upward (we left the inventory tree in this version to help people make the transition :-)

  Of course, you can create your own Flex Tree component to display what you want in your own opinion.

• vCenter and vsphere client

  Hello

  -with a free hypervisor such as VMware vSphere hypervisor, is an agenda we can pour so vcenter United Nations donor on wants to benefit from multitudes of advanced functionality of VMware? Alternatively the Vcenter just goes along with the paid hypervisor?

  -that settles on another machine I always find the Vsphere client (no), in order to remote server access is there is other tasks pour client, and is what we can create our flat virtual form without client to use it?

  I am a beginner in the field of virtualization, and I am very intressée by this technology, is rescue thanks

  Kind regards

  Hello and welcome to the forum of the community of VMware ESXi 5.

  Please note that the 'official' language to the English forums.

  1. You want to know if it is possible to use vSphere 5 free on the host computers and manage this host using vCenter (charges apply).
     I'm currently not sure and assume that it is not covered in the license agreement for the free vSphere 5.
  2. You also wanted to know if it is possible to drive your without client vSphere vSphere hosts.
     Well, on vSphere 5 free, does not allow vMA for "write" for guests. So use withouth of some hacks and cheats sooner or later, you will need to the vSphere Client to manage the guests on your host computer.
     If you want to avoid the vSphere on your desktop/laptop client, you could install vSphere client on one of your guests on the vSphere host.

• vSphere client problems (free 4.0)

  We have done some Windows updates late and now our vSphere client does not start. We receive the EXACT same errors described in this Ko - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1022611

  We are able to access that host to another client installs on other systems, but this it the primary server used to administer the host so it must be fixed. Can I just install the vsphere 4.1 on the 4.0 client client (even if the host is 4.0) or do I need to get version 4.0, 1/2?) It is a facility more or do I need to uninstall/reinstall.

  I guess the worst case scenerio I could just uninstall this update of .NET that broke it. Update of the host is NOT an option at this time.

  TIA!

  Download vCenter 4 U1.  There the packed client in which you can install separately after the launch of autorun.

  http://downloads.VMware.com/d/details/vc40u1/ZHcqYmQlcCpiZGVqdAis