vSphere Client Version

I thought we were supposed to be able to host managed low level with a newer version of vSphere, but this is not the behavior I see.

We have a server vCenter 4.0 4.0 guests and autonomous one 5.0 host.
I got vSphere Client installed on my machine and connected to the host 5.0 4.0. I was prompted to install vSphere 5.0. When I tried to connect to one of our 4.0 hosts, I was prompted to install vSphere 4.0 and could not open a session up to what I did. Now, I need to install vSphere Client 5.0 until I can connect to the most recent host again.
What Miss me?
Thank you.

that's what it looks like in the folder programs with multiple installed versions.

André

Tags: VMware

Similar Questions

  • "External I/O load detected on a data store" on LUN in vSphere Client version 4.1.0 build 345043

    Hello

    I have an ESX environment into a cluster of BL460G6 and 4 VMware ESXi, 4.1.0 installation 348481 in it.

    I have active DRS and the parameter ' level of automation of Migration: "="fully automated ".

    If I open the 'Home' = > 'Inventory' = > 'Warehouses', I have 26 MON, but only 9 in "mode healty", everyone has the following Alerts tab "alarms":

    Name:                                                                                    Description:

    Default alarm "Workload external I/O detected on a data store" which triggers if an external I/O workload is detected on a data store.

    Default alarm 'Use of data on the disk store' to monitor the use of disk data store.

    If I open "Alarm settings" on the "load external I/O detected on a data store" and choose the tab 'Triggers', the event carries the name according to 'vim.event.NonVIWorkloadDetectedOnDatastoreEvent', but I do not see what is coursing the alarm.

    What can I do to remove this alert? Is this a hardware issue on my LUN that generated this alert? (If Yes, what can I do about it?)

    Kind regards

    Carl-Marius

    You must have an Enterprise license.

    Then check in the properties of the data store to see if the IGCS flag is set.

    For NOTTM there is a column in the list of data store where you can see if if on acceleration or not.

    André

  • vSphere Client Web - VM not found after add to the inventory

    Hello!

    We use device and Web Client Version 5.5.0 Build 1750785 vSphere vCenter.

    Machine virtual VM1 in the resource POOL1 pool configured on cluster1. DRS on in manual mode.

    I create user USER1 in AD with no privileges and allow it to turn on VM1. (User1 is a member of the Group GROUP1 and power on permission set GROUP1 POOL1 level.)

    Everything works very well.

    After I have remove the inventory VM1 and add to the inventory again.

    Then I login to vSphere Web Client with the User1 credentials and try to power on VM1, but get error not found "VM".

    I relog to vSphere Web Client with administrative rights and try to turn on VM1. VM1 on successfully.

    I check the permission for User1 on VM1. Everything was ok.

    Can I use vSphere Client Version 5.5.0 build 1746248 (not web) to USER1 qualifications and try to turn on VM1. VM1 lit with success!

    But I need User1 to power on VM1 from WebClient.

    Do you have any suggestions?

    Thank you

    later I try to adjust the power on the authorization of USER1 (VM1), level of the virtual computer object. VM1 on WEB Client successfully!

    But I have put on leave at POOL1

    Yes, you are right.

    I solved the problrem. Thank you.

    After re - add to the discovered inventory updated VM1 on virtual machine file.

    I put read-only role in GROUP1 without spread on discovered virtual machine folder.

    VM1 powered with success on the web client and the vSphere Client.

  • An internal error has occurred in the vSphere Client. Details: Index was outside the bounds of the array.

    Hello world

    I have a number of active hosts VMWare ESXi 5 I manage, but since yesterday I encounter the above error.

    On a new server, I installed ESXi 5 successfully and I can connect to my Client vSphere host. However, as soon as I try to create a new virtual machine, the error message appears. (See attached screenshot)

    Later, I tried to connect to my existing 5 ESXi hosts and has experienced the same error when you try to perform the same operation.

    Any advice on how to fix this? I tried to reinstall the client on my machine without success. However, I can perform the same operations with success since another spare machine I have on the network.

    vSphere Client: Version 5.1.0 Build 786111

    (I'm trying to download the new version as we speak)

    Well, there are two things you could do to further isolate:

    1. on your account, try a clean boot and check http://support.microsoft.com/kb/929135

    2. try to recreate your user profile and check the difficulty of a user profile is corrupted

    Concerning

    one

  • vSphere client installation disables fullscreen option Web Access via a browser.

    After running through some scenarios, I have concluded that if the vSphere Client (Version 4.0.0/Build 208111) is installed, I have more to use mode full screen when you access a virtual computer via a browser (see attached image).

    What component (s) in the installation package is turn this option off?

    Someone at - it ideas?

    Thanks in advance,

    Phil Couto

    you, it captures screen appears that you are going to an instance of vSphere4 host or vCenter4.  When you got to the user interface, he said vSpher4 Web Access? There should be two buttons on your Console tab, one for a new window and the other for the full screen.

    .. .or if you actually a VI3 instance, I see the same behavior.

  • vSphere Client reports an incorrect version of vCenter Virtual Appliance

    vSphere Client 5.5 reports incorrect version of vCenter 5.5 Virtual Appliance. For example, vCVA build is 1891314, but in vSphere Client 5.5 GUI shows like 1891313 or vCVA build is 2170515 (last U2a), but in vSphere Client 5.5 GUI shows as 2001466

    I've updated the client to the latest version 1993072, but it made no difference.

    Any suggestions are appreciated.

    Thank you

    Slawek

    This is a bug according to the support for VMware.

  • Connection to the client with VSphere ESX host makes me download the old version of the VSphere client

    Welcome the OS Version: 5.1.0 - 2013

    Question: When I connect to my guests with the VSphere client it forces me to re-download the VSphere client. As you can see from the attached PDF there pretty much all installed versions. Yet, he's trying to go to vsphereclient.vmware.com to try to download again (which cannot because it is on a closed network). It is meaningless to me, as you can see I have all versions of the installed client. My boss who also has the same installed versions can connect. Actually, I installed 5.1 client so that should be enough. VSphere shows the host to 5.1.0 - 2013.

    Why is this not with my Vsphere client?

    Looks like your Client vSphere is version 5.1.0b (source: Match VMware vCenter 5.1 component Versions |) Virten.NET) and your ESXi host is version 5.1 Patch 4 (KB VMware: Products VMware correlating build numbers to update level )

    You need download the vSphere Client 5.1 update 2 version to directly connect to this host.

  • All the version of vSphere client...

    Dear team,

    Once we open the vmware.com website and I want to see or download all versions of vsphere client then where to click, as i open thepagewhere I m able to see or download all versions of vsphere client.

    Can someone help me please on the same.

    concerning

    Mr. VMware

    Hello

    is that what you are looking for?

    http://chall32.blogspot.de/2011/10/VMware-vSphere-client-download-URL.html

    Frank

  • Language issue VSphere Web Client Version 5.1.0

    Hi all

    How can I change the VSphere Client Web Version 5.1 to the United States English version without completely re - install? I also have a French Windows XP with IE in French. My hosts are English American and I did not have this problem of language with the VmWare Vsphere Client (it is in US English)

    Thank you

    Concerning

    Bernard

    Hi bernardP,

    To display the web client in a localized language:

    Add the location parameter to the URL used to access the web client:

  • old question: where to get the latest version of the vSphere client

    Hello

    I reinstalled my W7 SP1.

    I need to access ESXCi 4 host couple and 4.1

    The customer I have in my backup is probably ESXi 4 (always a update option when starting installation).

    As you understand that this client cannot be successfully installed on W7 sp1.

    I get famous:

    ---------------------------
    Could not connect
    ---------------------------
    Error analysis of the file "clients.xml" Server "172.20.32.192".

    Logon will continue, contact your system administrator.
    ---------------------------

    I found a few long threads about this at the suggestion of delete MS KB... I doh't see this KB under updates installed in my W7 (probably due to the SP1).

    I would like to install the client in the normal way. Please provide a link to the latest version of the vSphere client that will allow access to my boxes.

    It cannot find in the section download vmware.com

    THX.

    Michael.

    You can also get it from https://ESXiHOSTNAME/

    The link takes you to the internet: http://vsphereclient.vmware.com/vsphereclient/3/4/5/0/4/3/VMware-viclient-all-4.1.0-345043.exe

  • Free version of ESXi can support for configuration of start and stop virtual machines via vSphere Client?

    I have read and found some documents on ESXi.

    According to the documents, I know that ESXi free version does not support some advanced virtual machine configurations and does not support write to ESXi host permission. But when I download ESXi from vmware.com, I can't find the free version. He will always be a trial of the licensed version edition because I can always do the configuration of start and stop virtual machines via vSphere Client installation. I can also run scripts (lamw) pl in vMA to stop the ESXi host (authorization to write ok?)

    Then I confused. How can I get the really free version of ESXi? Or will the free version after 60 days of evaluation?

    Start/stop above configuration is in vSphere Client via 'Configuration'-> "start/stop VM"-> "Properties"... «-> "Allow the virtual computers start and stop automatically with the system" actions setting and stop virtual machines can be configured to "comments"turn off computer"or"Suspend".» Can any body tell me if it's supported by ESXi free edition?

    Is the free version of vSphere Client too? Because when I use the vSphere Client, he told me that I have 60 days of evaluation. This confused me again. I think that vSphere Client is always free, am I right?

    Any suggestion or advice is much appreciated.  _

    Micky

    Configuration of start and stop virtual machines is available with the free version and licensed, with the free version you would be configured everything via vSphere Client, where as with a licensed version, you can optionally use scripts to configure it and also issue restarts/stops using scripts.

    Second, shutdownHostViaSOAPAPICall.pl for the version licensed and free of ESX (i), this script will work in both free and licensed because it uses direct SOAP calls emulating the vSphere Client communication. Take a look at the documentation for details, but this of course is not supported by VMware.

    =========================================================================

    William Lam

    VMware vExpert 2009

    Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

    Twitter: @lamw

    repository scripts vGhetto

    Introduction to the vMA (tips/tricks)

    Getting started with vSphere SDK for Perl

    VMware Code Central - Scripts/code samples for developers and administrators

    VMware developer community

    If you find this information useful, please give points to "correct" or "useful".

  • Version 3.0 on 5.5 vCenter using vSphere client

    New vCenter 5.5 (build 2646482) most recent of the VMware Web site.

    vSphere client 5.5 (of course)

    Brilliant new V3.0 of OMIVV

    Installation device and registered in vCenter without error.

    Seems to work in the VMware web client (I'm still exploring). I can manually add servers iDRAC.

    Since the heavy Win32 client, I don't get the Wizard but I get an empty bar in the middle of the screen with "Error #2048" down at the bottom.

    My client is Win7 x 64 with IE10 default browser.

    Where to start?

    See you soon

    Ian

    Hello Ian,

    Try the following steps:

    1. Disconnect and connect to VMware Desktop client (thick client).
    2. Go to home > hosts and Clusters > select any host Dell > click the tab "OpenManage Intégration" and wait for it to load
    3. Now, click on Home > Dell Management Center, it should work now.

    Let me know how it goes.

    Thank you

    Vikram KV

  • After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

    After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

    Get the error message...

    [[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
    [[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
    [[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
    [[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
    [[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

    Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

    Contact VMware support if necessary.

    System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

    at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

    at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

    at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

    to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

    to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

    to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

    System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

    to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

    to VirtualInfrastructure.Utils.ClientsXml... cctor()

    System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

    ...

    to System.Xml.Serialization.XmlSerializer... ctor (Type type)

    to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

    -End of the exception stack trace internal-

    -End of the exception stack trace internal-

    After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

  • I can't connect to Vcenter using vsphere client

    I installed vCenter 6.0 and vsphere client 6.0. I can connect to the web client, but when I am connected to vCenter using vsphere client I got error.

    In vsphere version 5.5 I can connect to vCenter using vsphere client 5.5.

    I can't find any information on this subject on vmware.com.

    Do vsphere 6.0 support connecting to vCenter using vsphere client?

    I guess you are using Vsphere Client beta built which has only the features of client enabled host.

    Try GA build Client to connect to vCenter. However, the latest vsphere 5.1 leave are available only in the web client.

  • Very slow access to data on HP MIcroserver Gen8 warehouses. Can not change the system of booking resources with vSphere client.

    I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
    Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
    I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
    I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).

    Hey ArnisR,

    I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.

    The problem is caused by the last (HP) ISO (from March);

    -Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi

    -Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi

    I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.

    The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!

    Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.

    I hope this helps!

Maybe you are looking for