vSphere Host Update Utility - ERROR: not enough space on the boot partition

Similar Questions

• The host has not enough space on the boot partition to store the image upgrade. It takes a minimum of size_in_MB. After the release of space or perform an installation from the CD-ROM.

  Hi everyone, the difficulties in trying to update the Update Manager. ESX4.1 to ESXi5.0

  Error I get is below to correct the scan before update:

  The host has not enough space on the boot partition to store the image upgrade. A minimum of 299MB is necessary. After the release of space or perform an installation from the CD-ROM.

  There is enough space in the local disk

  Size of filesystem used Avail use % mounted on
  / dev/sdd5 4.9 G 1.6 G 3.0 G 35%.
  / dev/sdd2 2.0 G 107 M 1.8 G 6% / var/log
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / Boot
  / dev/CCISS/c0d0p2 4.9 G 1.6 G 3.1 G 34% / esx3-installation
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / esx3-installation/boot
  / dev/CCISS/c0d0p7 2.0 G 101 M 1.8 G 6% / esx3-installation/var/log

  Cannot continue installation due to the lack of space and don't have the option upgrade CD directly (of complicated issues)

  Do you have any suggestions?

  Thank you

  It sounds like this host has already been improved 3.x! In this case you will not be able to upgrade to 5.x using the Manager to update because of the small partition/boot (99 MB).

  to remedy the hosts against a basic upgrade

  ... You cannot use Update Manager to upgrade to 5.0 ESXi host, if the host has upgraded ESX 3.x to ESX 4.x. These hosts have not enough free space in the partition/Boot to support the process of update Update Manager. Use either interactive or scripted upgrade.

  André

• TouchSmart 610 - installation of windows 8 on a partition, error, not enough space on the system partition?

  I created a 150 GB partition to install Windows 8 so I can dual boot Win 7 and Win 8.  When I try to install, I get a message that there is not enough free space on my score 'system '.  The only thing I can think is that it refers to the partition of 100 MB (reserved) system.  It has only 10 MB of free space.  The partition I want to install on obviously has a lot of space.  Someone had this problem and got around him?

  UPDATE: found the problem with my 100 MB partition reserved.  I assigned a drive letter in disk management and saw a "test.vhd" of 55 MB file.  I recognized as a virtual drive that I had created and deleted a few months ago!  Deleted this file and then removed the drive letter assignment and Windows 8 is installed on my score in 15 minutes approximately.

  Hello meezer,.

  Glad you was able to get installed it. He always seems to be the little things that make us the most problems.

• B2496824 Player 7.1 + Win 10 (split volume) error: not enough space on the disk

  Hello!

  I have the following configuration:

  Host: Windows 7 x 64 professional

  Host: Samsung 840 EVO 240 GB SSD with 48 GB of free

  Comments: Overview of Windows 10

  Comments: 60 GB VMDK, spread across 30 x 2 GB vmdk, which are NOT previously affected

  Description of the problem:

  I do upgrade from Windows in the Win10 system, and then at one point I had a warning of VMware Player, which is not accessible VMDK #009

  It's the NEWSPAPER, which States that vmdk #009 running out of space... which is very strange, considdering that I have 40 GB free in the guest OS and 48 GB free in the HOME... and the VMDK is an expansion of volume

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: MsgQuestion: msg.vmxaiomgr.retrycontabort.rudeunplug response = 2

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: DISKLIB-LIB: RWv failed ioId: #46815 (13) (13).

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: DISK: drive e/s on scsi0:0 failed: there is not enough space on the file system for the selected operation (13)

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: # dumping contents of iov #.

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: WRITE

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: startSector = 37601304

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numSectors = 8

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numBytes = 4096

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numEntries = 1

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: entries [0] = F53A8000 / 4096

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.845 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  After copying VMDK #009 in a new file

  and after running the tool of restoration Performance of Samsung,

  Windows 10 VM is now back in business!

• Want to Phoenix 850-150qe: program file can not be updated as a not enough space on the new computer

  I have a new computer with disk 3 TB initially space.  I have now available 2.60 TB.  I have this simple little card game that has an update of 207 MB of available space required.  Whenever I try to load it, it says "program file can not be updated because of insufficient disk space".   The original game loaded just fine but not the update.  I wrote to the company that has given me a standard introductory text on turn off my antivirus which is nothing to do with my problem.  Someone else has encountered this and if yes, what is your work-around?  I am trying to load it on the C drive with my game so am loading at the right side of the road.

  I solved my problem.  I went back to my computer and I went back to my reliable want 700-074 also having windows installed 10.  My little program works very well and I was able to update the program.  This program was one of the many problems with this computer.

• not enough space on the recovery partition

  I get a balloon saying that I have a not enough space on drive D: I disabled the system restore and monitoring of training. It's the recovery partition and I don't write at all to it. It gets real boring. Any suggestions will be appreciated.

  These articles describe how to remove the warning.    Unfortunately, this looks like an approach all or nothing and cannot be turned on/off by the device.

  'Description of the Notification in Windows XP low disk space'
    <>http://support.Microsoft.com/kb/285107 >

  "How to remove the warning of low disk space.
    <>http://support.Microsoft.com/kb/555622 >

  HTH,
  JW

• Not enough space on the store of data error

  I just created a new virtual machine and the data store has 1 GB free, but when I try to turn on the virtual machine, I get the error ' not enough space on the data error store '.

  What is the minimum data required to power the virtual computer space? I thought that 1 GB is a lot of space...

  That is also correct long as you do not have a defined reserve, because don't forget the size of the by vm vmkernel swap file is equal to the memory assigned to the virtual machine minus the reserve memory.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Not enough space on the data store

  I created a VM w2k8 server. I have attached a second virtual drive to it in the vsphere client determined I gave him too much space. I went back in the vshere client and click on delete. Now, when I go to add a second drive with the right amount of space I want t use I get error not enough space on the data store. I noticed that the old file vdmk still exist but do not know how to proceed. It is a 5 ESX environment and the data store is on the SAN. Space on the windows server is listed as unallocated.

  Hello and welcome to the community of VMware. Well I would like to browse the data store and make sure that there are no vmdk files sitting here that, if the other wise not to be there. Have a go at this and feedback your conclusions.

  Best wishes.

• Cannot upgrade to ESXi 4 Update 1 via vSphere Host Update Utility 4.0

  Hello

  can someone tell me why I can't update ESXi 4.0.0 build 219382 to ESXi 4 Update 1 via vSphere Host Update Utility 4.0? The doesn´t utility see the update.

  The problem is, I can't download the update on http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_4/4 because I always get the error

  "I'm sorry, at the moment you are not allowed to download VMware ESXi 4.

  Update 1 Installable.

  You have the following options:

  "

  How can I get the update or the update with the host update utility?

  I already have an activated ESXi 4.0 license!

  219382 is the latest version. You already update 1.

• vSphere host update utility &amp; Internet without computer

  Stuck in a bit of a puzzle here, is there a way to get the updates installed through the utility 'vSphere host update' for ESXi without an Internet connection?  Heck, I'll settle for any method that does not require vCenter.  Before I use to download updates on a USB key and use the Infrastructure Client v2.5 (for ESXi 3.5)... which no longer be an option in the "vSphere host update utility.  Comments welcome.

  Have you tried vihostupdate.pl the vCLI.  The example here is ESXi 3.5 but he's going to pretty much the same for 4.0 http://www.vm-help.com/esx/esx3i/esx_3i_rcli/vihostupdate.php.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• vSphere Host Update Utility &amp; ESXi 4.0 Upgrade

  I'm trying to upgrade a system ESXi 3.5 to ESXi 4.0.  I use the guide at:

  http://www.VM-help.com/esx40i/ESXi40_upgrade_without_virtualcenter.php

  When I lauch the vSphere Host Update Utility 4.0, I have a popup that informed me it must download the patches to enable the fix on a functional level.  Problem is the patches are not download or install.  Did someone knows a way I can manually download the patch and install it?  Here is what says the update utility:

  vSphere Host Update Utility to download the patches from the VMware fix repository to enable the functionality of patch.  You still want to connect to the VMware patch repository?

  Yes or no

  For the upgrade process, you need the full ZIP file for ESXi 4.0.

  Patching is the next step, but the fist you need to do the upgrade step.

  André

• VMware vSphere Host Update Utility

  Hello!

  I get this weird message "Patch this version of the host is not supported by vSphere Host Update Utility" which connection to an ESX4 host (ESX 4.0.0 build 164009) - also see attached screenshot...

  Am I missing something or is this a mistake? Shouldn't be able to patch my ESX4 host with this utility?

  I hope someone can help!

  Kind regards

  K

  Rerun Setup to vcenter one, and the vm install update manager!

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• How to install vSphere Host Update Utility with vSphere Client 4.1?

  Hi all

  When I install vSphere Client 4.1, I didn't see option to install vSphere Host Update Utility.

  (With vSphere 4.0 Client is OK, option vSphere Host Update Utility is ready)

  so, how to install vSphere Host Update Utility 4.1?

  Thank you

  -

  ---

  Blog to the Viet Nam virtualization technology

  http://congngheaohoa.blogspot.com

  Right.

  See the upgrade guide (http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf)

  André

• Where vSphere Host Update Utility?

  I installed ESX 4.1.0 (build 260247, free) and the vSphere Client. I searched for hours, but can't find the vSphere Host Update Utility 4.0. I don't have a chance to add it in the vSphere Client Installer.

  Thank you

  Hello

  According to this blogupdate utility host that installed with the vSphere Client is now gone in 4.1.

  HTH

  Marek.Z