VTI transform whole NAME and ipsec profile NAME must match?

Similar Questions

• After update to 5.0.15 server, can not activate the OD service and the Profile Manager

  Hi, I have recently updated my Server 5.0.15 under El capitan 10.11.3.

  After that, Service OD and the Profile Manager can be activated server GUI.

  Of course, all users on my network are missing from the list of users; just local users remain.

  Reason: cannot be connected to the node 127.0.0.1

  How can I recreate an OD without use of app server?

  Thank you.

  P. S.

  Of course, even in the local server translates users preferences pane not connected.

  Many Open Directory problems can be solved by taking the following measures. Please test after each of them that you have not already taken it and back up the data before making any changes.

  1. the OD captain must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; for example, Ethernet and Wi - Fi.

  2. you must have a working DNS serviceand the host name of the server must match the FQDN name. To confirm, select the server by its name in the sidebar of the window of the server application, and then select the Preview tab click the button change on the host name line. The access that your sheet of server, the domain name must be selected. Change the host name, if necessary. The server must have at least three levels (for example, "server.yourdomain.com") name, and the name must not be in the top-level ".local" domain, which is reserved for Hello.

  3. the main DNS server used by the server must be itself, unless you use another internal DNS server. The only DNS server on the clients should be internal, they should get from the DHCP server, as appropriate.

  4. If you have accounts with basic network directories, make sure that the URLS are correct in the user settings. A return status of 45 from the demon authorizationhost in the newspaper may mean that the URL for the installation directory was not being updated after a change in the host name or the file sharing protocol (AFP, SMB, or vice versa.) If the server and the clients run all OS X 10.10 or later, directories should be shared using SMB instead of AFP.

  5. follow these instructions to recreate the Kerberos configuration on the server.

  6. If you use authenticated connection, check the validity of the certificate of the master. The common name must match the host name and domain name. Unselection and then reselect the certificate in.app was reported to have an effect in some cases. Otherwise, delete all certificates and create new ones.

  In the case of a self-signed certificate, create a trust profile in the Profile Manager and deploy it to the customers. On the server, you may need to create the folder

  /etc/openldap/certs

  and place a copy of the certificate of the server, for example:

  /etc/openldap/certs/server-name

  Also add a directive to the file

  /etc/openldap/ldap.conf

  of the form

  TLS_CACERT /etc/openldap/certs/server-name

  7 remove the link, then to connect customers in the preferences users and groups window. Use the FQDN of the master name.

  8 restart the master and clients.

  9. do not connect you to the server with the account of the user of a network.

  10 turn off the internal firewall in use, including third-party "security" software

  11. If you have created replica servers, remove them.

  12. If OD has recently stopped working while it was working before, you can be able to restore automatic backup in/var/db/backups, or a snapshot of the time of this backup Machine.

  13. If there is slapd errors in the log, try the following steps.

  Disable the Open Directory in the server application.

  Enter in a shell:

  cd /var/db/openldap

  sudo -s

  db_recover -c -h authdata

  db_recover -c -h openldap-data

  Turn on Open Directory.

  14 reset database password strategy:

  sudo pwpolicy -clearaccountpolicies

  15. as a last resort, export all users od. In the Open Directory of the server pane, delete the OD server. In some cases, you may need to use the shell to remove the server. Then recreate it and import the users. Make sure that the UID is in the range 1001 +.

• 8.3 P6 which database table I can find activities and safety profile details?

  
  I checked P6 8.3 scheme but I can't find what table of database activities and security profiles (both global and project) are to be saved.

  Can anyone help with this?

  If I take backup of ADMUSER, PUBUSER and PRIVUSER suffice as full backup?

  Hello

  Activities are stored in the table called TASK

  Security profiles are stored in the named table of PROFILE (scope_type field determines whether it is Global (ST_Global) or Project (ST_Project))

  If you are on 8.3 then you should also back up your work user and possibly extended schema background if you are using EPPM.

  This is the command I have issue to make a backup (I guess an Oracle database you given refer to admuser that this account is not SQL).

  exp system /@ = file = C:\backup-fichier-name.dmp owner (admuser privuser, pubuser, bgjobuser, pxrptuser) = log = C:\log-fichier-Configuration.log subsidies forced statistics y = y = none

  Concerning

  Alex

• HBA/LUN names - must be the same on hosts?

  Hello

  I have a question about LUN and CF. Hba name must be the same for the hosts to access the same LUNS? For a long time that I touched CF I'm afraid!

  Bascially, if lunA hostA access via hba1, its path name would be something like hba1:0:0:1 AND if hostB accesses lunA via hba2, it would be hba2:0:0:1. Is it a problem that the name is inconsistent? I thought I read somewhere that (conical?) names must be the same?

  Man I like NFS so much more than CF!

  Thanks a lot if someone could clariffy CF/LUN assignment of names for me

  Rich.

  What you're watching is good old CTD/CTL (controller, target, device/LUN) name.  It is just a reference to how you got where you are going.  Each device must be unique to a controller, and each LUN can be used once on a controller.  ESX tops out at 255 LUNS (see maximum configuration for more details on this).

  So you don't match at all on hosts.  However, it is advisable for your mental health to ensure that each data store that is presented to a host in a HA cluster is presented to guests.  This prevents the migration of VM problems.

  It also makes it easier to troubleshoot (esp. communicating with a group of dedicated storage) if each of the LUNS presented Gets the same number on each host.

  Virtualization of happy!

  JP

  Please consider awarding points for correct or helpful answers

• group names must be unique among all the services of JHS 11.1.1.2.49

  Dear Jheadstart team,
  
  After the migration of JHS11.1.1.2.29 to JHS11.1.1.2.49, we noticed that our applications swells because there are groups with the same name in different application definition documents. Jhs application generator journal reports:
  + Name (short) JAG-00169 [services] group "Departments" already existing in the "AppModule" function, group names must be unique across all services. + *
  
  because the name of the group "+ departments +" were used twice, once in the definition of the application AppModuleServiceDefinition.xml and once in AppModuleTestServiceDefinition.xml.
  
  
  I wonder if there are any available setting in the configuration of jhs that could disable this validation? Otherwise, we must rename a lot of code in the application.
  
  see you soon
  George

  George,

  In jag - config.xml, there is the following section:

  
  
  
  
  

  You can add JAG-00169 in this section and generation will take action. However, it is at your own risk, I recommend you to rename one of the groups.

  Steven Davelaar,
  JHeadstart team.

• Why is the synchronization statistics are not Performand and memory profiler?

  Hello

  I have a Subvi, which I have timed with a stopwatch to 88 seconds, and the Profiler is telling me that the total time is 20 seconds.  The Subvi is activated by a button, contains a loop for, and is the last action in the program.  Everything is always changing as expected - if I reduce the number of iterations inside the Subvi loop for by a factor of 10, I can measure and 9 seconds with my stopwatch and the Profiler tells me 2 seconds.  What is going on?  Why is the Profiler to offshore?

  Ken

  Ken,

  AVI playback has a period included widening due to the framerate of the video that you read. If the fps (frames per second) of the video is for example 30, you have to wait between two images 1/30 s = 33.3 Ms during this time of waiting, the Profiler does not show the appellant as active VI. The caterpillars needed time by calling contains only the loop and the call to IMAQ AVI reading Frame.vi. No time the Subvi takes.

  If you look in the time taken by IMAQ AVI frame of reading, you won't see the "wait time", as it is once again a function called by this VI...

  hope this helps,

  Norbert

• I recently turned on my laptop and my profile/account has not been recognized.

  I recently turned on my laptop and my profile/account was not recognized during the startup of the computer toward the top, so a temporary account/profile is used instead.  I did some work saved information on the computer using this temp-account profile.  My regular account/profile has been recognized at every time since, but I was not able to find the location of the temp profile/account or the information stored when using this profile/account temporarily.  The profile was not a guest account or an administrator account.  That's only 2 accounts visible to me.  There is only 1 account on the laptop so I actually disabled guest accounts.

  the laptop is running windows vista

  Hi Eric J Kim

  After you log on to a Windows Vista system with a temporary profile, any changes you make on the current desk are lost once you disconnect the system

  http://support.Microsoft.com/default.aspx/KB/947242
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards

  I have a T610 HP Smart Thin Client from scratch and I get zero Smart software to recognize the card chip when connecting. How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards. You can configure without the profile HP of the XML editor.

  Mike Sieradzki

  Hello ski_mike.

  Welcome to the HP Forums. I understand that you want to support with your Smart Client zero. However, it is a commercial product. To get assistance, thank you for posting your question on the business Forums HP: HP Enterprise Business Community

  Thank you

  Mario

• Difference between webVPN, SSL vpn and ipsec client

  Hello

  We just bought an ASA5510 and I am trying to understand the difference of the possibilities mentioned VPN. Can anyone describe the differences and use scenarios of all types of remote access vpn of the asa?

  Thanks in advance.

  Rgds,

  Rasmus

  Hi Rasmus,

  They use different SSH and IPSEC protocols, and there is also of course in terms of security.

  SSL is easy to deploy than ipsec. Imagine that you have 200 + users and to connect to the vpn, you must give them the pcf file and client software, which is not required in the case of SSL.

  Kind regards

  ~ JG

  Please note if assistance

• SSL VPN and ipsec

  For CISCO1841-SEC/K9, ssl and ipsec vpn connection vpn how, we can make and? The datasheet is not any specific number.

  Thank you.

  Dijoux

  With the PIX and ASA, the number of peers is specified in the license and limited to the number specified in the license (so in support of peers, you must update the license). From my experience of the IOS application does not bind the number of peers for what anyone in the license. So, if you buy a feature set for IOS router supports IPSec/SSL VPN, then this is your license for IPSec and SSL peering (no separate license is required).

  HTH

  Rick

• The GRE and IPSec

  We currently have several sites with ISAKMP/IPSec tunnels between routers 2800 and we need some of them migrate to the GRE with IPSec tunnels. Are there problems with endpoint tunnels GRE and IPsec on the same router and interface?

  I didn't know all the problems - apart from the router doing the encryption/decryption & GRE encapsulation/decapsulation, just be respect for traffic through the put.

  I have noted problems with traffic GRE and MTU problems. Cisco recommends a MTU of 1440 at Discretion, I would say that set 1400.

  HTH

• Claire ISAKMP and IPSec in PIX Security Association

  Hello

  How do you delete the ISAKMP and IPSec security associations in a PIX? (As you do in the IOS using the commands 'clear' crypto..)

  Thank you------Naman

  The type of config mode:

  Claire ipsec his

  Claire isakmp his

  I hope this helps.

  Cody Rowland

  Infrastructure engineer

• Microsoft Update and temporary profile

  After that I updated my system with windows update, my connection used profile and puts me in a temporary profile. I lifted the online solutions and make a new profile to see if it works and this profile is also not to sign. She is the temporary profile. How can I solve this problem?

  I rebooted several times without success.

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google update (if you added the toolbar Google, Chrome)
  or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error
  in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected
  on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK, then lift it up
  Return to the admin. This allows clear of corruption. Do the same for other accounts if necessary after
  following the message above.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden here command prompt command
  If necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is it possible to disable some programs and services in a profile, and another profile in Win 7 x 64 Ultimate has no effect?

  Is it possible to disable some programs and services in a profile, and another profile in Win 7 x 64 Ultimate has no effect? I have the profile and I went off the network and AV connection because I won't need them because I will work with a DAW in this profile.  When I connect to my profile on a regular basis that the network connection is disabled and the AV is thus disabled.  I want to eliminate any performance drain my Security Suite requires in profile, where I use the DAW.  There must be a way to do this without making all profiles.  Thank you in advance.

  Hello

  You cannot limit disabling anti-virus and network for the specific user account.

  If you are referring to other programs and applications, you should check the link below and follow the suggestions mentioned by Ronnie Vernon.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/how-can-i-limit-user-access-to-programs/0386afe2-5ec6-4965-BE06-80ccfce06113

  It will be useful.

• After the upgrade of Camera Raw 9.1 all cases and objectives profiles have disappeared.  How to make a comeback?

  After the upgrade of Camera Raw 9.1 all cases and objectives profiles have disappeared.  How to make a comeback?  My camera and lens where in there before and worked fine.

  You can see a screenshot of the area of optical Correction to ACR, the list of the brand expanded?

  

  The ACR and DNG Converter store their profiles in the same folder.  If you have recently uninstalled the DNG Converter, maybe he deleted all of the profiles?  You could put them back by reinstalling the DNG Converter 9.1, which is available on the Adobe updates page:

  Updates