Vulnerabilities with ASA Service Module

Similar Questions

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert

• ASA with different failover module IPS

  Hi all

  Is it possible to configure the failover of the ASA with different IPS module configuration because we have: ASA 5585-X with firepower PHC-10 and ASA 5585-X with IPS SSP-10

  Thank you

  N °

  Inventories of material (basic unit, memory and optional modules) must be the same in a pair of failover ASA.

• Cisco Firepower 4110 Clustering with ASA and DFT

  Hi all

  We have a pair of Cisco 4110 firepower devices and have them clustered for the ASA Security Module.

  There seems to be no option to add an additional logical device for the threat of fire power defence Module, so can only assume this is not supported in an active/active state.

  More on the SAA Module there is no tab of remote access VPN Configuration.

  So my question is how to incorporate the functionality of defense threat in the ASA, I suppose that this would be by the engine unloading in the advanced settings, but requires the SAA be in Active mode / standby and the power of fire threat defense logical device will be available?

  Second question is it would have been better buy the Cisco ASA 5585 X with the Module of firepower in support of all the regular features of the SAA as well as traffic inspection unloading to the module of firepower?

  I found some documentation on the Cisco site, but tend to lose sight of where the reference to FTD and not be supported of the Clustering or RAS VPN not supported by ASA or FXOS docs, so I was hoping for some insight on here.

  Appreciate any clarity around the support of devices 4110 of the firepower and configuration of the FTD and ASA combines the features supported.

  We run ASA v9.6 (2) and FXOS 2.0.1 (86).

  Thanks in advance.

  Mark

  On a firepower 4100 Series chassis, you can run a single logical unit. Several logical devices are supported only on the 9300 firepower that supports up to 3 modules of security.

  So choosing between types of module ASA and DFT (or technically you can also deploy the RADware vDefense Pro but it is mainly for service providers).

  One or the other and never the two.

  The module of the SAA supports remote access VPN over 4110 of firepower. I put one in place personally nothing this month. Have you recorded the chassis with the smart licence and applied ASA licenses (basic an and 3DES / AES)?

  The ASA modules take supported the HA and inter-chassis clustering on the 4100 series hardware.

  If you run picture FTD, there is currently no support for remote access VPN. It is a high priority position of roadmap for a future version (post - 6.2). FTD does not currently support the chassis inter cluster but that should be in version 6.2.

• The ASA CX Module failover

  Hello

  I didn't send a CX module before. We are about to deploy firewalls 2xASA5585-X with CX (for STROKE and WSE) modules.

  I'm sure I know the answer to this (I've deployed a lot of old OLD ASA with CSC modules in them, and I'm guessing that the CX module has the same).

  1 will be the failure of the module CX trigger a failover event (fail-over active standby)? My guess is not?

  2. If it is not and policy service is set to 'closed' this means that the client should perform a manual failover to the secondary/sleep to restore access, web - this correct?

  Pete

  www.petenetlive.com

  Hi Pete,.

  1 will be the failure of the module CX trigger a failover event (fail-over active standby)? My guess is not.?

  Yes he custom of tipping your ASA, depends on configuration either will be allowed or close the traffic

  In the area if ASA CX card fails, click permit traffic or close traffic. The narrow traffic option defines the ASA to block all traffic if the ASA CX module is not available. Permits for movement option sets the ASA to allow all traffic through, if not inspected, the ASA CX module is not available.

  2 if it is not and the service policy is set to 'closed' this means that the client should perform a manual failover to the secondary/sleep to restore access, web - this correct? .When set to allow traffic CX failure, there is no need to manually failover your ASA firewall between HA

  

  Step 8 check the ASA CX check this box traffic flow.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/CX/cx_qsg.html#wp49530

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/modules_cx.PDF

• Filtering in Cisco ASA using module sfr Web

  Hello

  I have Cisco ASA 5515-x version 9.2 (2) and I use ASDM version 7.2 (2). I module 5.3.1 LICO of ASA. I want to activate the ASA web filtering feature. Previously, I used the method of expression regex in the SAA to perform url filtering, but it was not effective. Since then, I have the license for the management of firesight I want to use it.

  But I am confused as some cisco docs say to set the firesight management in vmware while others offer to run the boot image in the SAA itself. What is the right way to do it?

  The show module command, I see that my module of sfr is in place so that means the sfr module is pre-installed, and I can't do a lot of configurations?

  It would be better for me to run ASA itself, but if it does not work like that then I will configure in VM. So please me clearify that concerns my options and my best chance.

  If it should be installed on a virtual machine or ASA itself, then please give me the link to download the boot images and other files on cisco.com. I have the user name and password, but did not find the correct software.

  Thank you in advance.

  Your ASA 5515-x performs the minimum version required to support the fire power module (sfr). The module also runs the initial version of the software of the firepower for ASA-based module firepower.

  With this combination of Software ASA and firepower on your device, you will need to use an external administrator of firepower to manage module (create strategies, apply licenses, monitor events etc.).

  From ASA 9.5 (1) and firepower 6.0, you have the opportunity to make the most of the same functions via ASDM. You must upgrade the ASA (both ASDM) and firepower to achieve module.

  In both cases, you should Protect licenses and URL filtering for the module of firepower.

  The Quick Start Guide is here: http://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/sfr/firepo...

  See also the excellent vidoe Lab Minutes guides for firepower: http://labminutes.com/video/sec/ASA%20FirePower

  The ASA and ASDM software is here:

  https://software.Cisco.com/download/type.html?mdfid=284143128&flowid=31442

  Software module of firepower is here:

  https://software.Cisco.com/download/release.html?mdfid=286271171&flowid=...

  To run the power of fire management center VM, the software is here:

  https://software.Cisco.com/download/release.html?mdfid=286259687&flowid=...

  All the links above require a username cisco.com entitled (support agreement) to download the software.

• Oracle.manageddataaccess.client with Silverlight with Ria Services + c#

  Hello guys.

  I have a c# Silverlight + Oracle dashboard with RIA services.

  I published in my computer and it work ok. But in the server it doesn´t run.

  I don't know what to do. It works just before.

  My web.config:

  ---***---***---***---***---***---***---***---***---***---***---***---***

  <? XML version = "1.0"? >

  (<!-copyright ©) Microsoft Corporation.  All rights reserved. ->

  < configuration >

  < configSections >

  "< name =" article oracle.manageddataaccess.client"type =" OracleInternal.Common.ODPMSectionHandler, Oracle.ManagedDataAccess, Version = 4.121.2.0, Culture = neutral, PublicKeyToken = 89b483f429c47342 "/ >

  < / configSections >

  < system.web >

  < debug compilation = "true" targetFramework = "4.0" / >

  < system.web >

  < system.data >

  < DbProviderFactories >

  < remove invariant = "Oracle.DataAccess.Client" / > "

  < remove invariant = "Oracle.ManagedDataAccess.Client" / > "

  "< add name =" ODP.NET, successful pilot"invariant =" Oracle.DataAccess.Client.

  Description = "Oracle Data Provider for.NET, successful pilot"

  Type = "Oracle.ManagedDataAccess.client.OracleClientFactory, Oracle.ManagedDataAccess, Version = 4.121.1.0, Culture = neutral, PublicKeyToken = 89b483f429c47342" / > "

  < / DbProviderFactories >

  < system.data >

  < system.serviceModel >

  < links >

  < customBinding >

  < binding name = "Painel.Web.Service.customBinding" >

  < binaryMessageEncoding / >

  < httpTransport / >

  < / binding >

  < / customBinding >

  < / links >

  < serviceHostingEnvironment aspNetCompatibilityEnabled = "true" multipleSiteBindingsEnabled = "true" / >

  < services >

  < name = "Painel.Web.Service service" >

  "< endpoint address =" "binding ="customBinding"bindingConfiguration =" Painel.Web.Service.customBinding "contract =" Painel.Web.Service"/ >"

  < endpoint address = link "mex" = "mexHttpBinding" contract = "IMetadataExchange" / >

  < / service >

  < / services >

  behaviors of <>

  < serviceBehaviors >

  behavior of <>

  < serviceMetadata httpGetEnabled = "True" / >

  < serviceDebug includeExceptionDetailInFaults = "false" / >

  < / behavior >

  < / serviceBehaviors >

  < / behaviours >

  < system.serviceModel >

  < system.webServer >

  < runAllManagedModulesForAllRequests modules = "true" / >

  < system.webServer >

  < oracle.manageddataaccess.client >

  < version number = "4.121.2.0" >

  < Parameters >

  < name of the parameter = value 'TNS_ADMIN"="C:\instantclient"/ >

  < / Parameter >

  < / version >

  < /oracle.manageddataaccess.client >

  < / configuration >

  ---***---***---***---***---***---***---***---***---***---***---***---***

  The message using Server doesn´t:

  ---***---***---***---***---***---***---***---***---***---***---***---***

  Exception information:

  Exception type: ConfigurationErrorsException

  Exception message: Nao faith possible carregar o tipo System.ServiceModel.Activation.HttpModule assembly System.ServiceModel, Version = 3.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089.

  ---***---***---***---***---***---***---***---***---***---***---***---***

  Any help?

  Thanks in advance.

  Luis

  Guys,

  I modify the machine.config to the machine.config.default and everything works.

  Thanks again for your help.

  Luis

• How to add a dependency to the library for the java service modules?

  Hello

  I try to add Google gson jar as a dependency of the sample of chassis (/ chassisRackVSphere-service) and I'm facing some problems with the installation of osgi.

  ////////////////////////////////////////////////////////////////////////////////////////

  Report of resolver:

  A Package Import could not be resolved. Resolver error data < Import-Package: com.google.gson; version = "0.0.0" >. Caused by the constraint missing bundled < com.vmware.samples.chassisrackvsphereservice_1.0.0 >

  constraint: Import-Package: com.google.gson; version = "0.0.0" >

  at org.eclipse.virgo.kernel.install.pipeline.stage.resolve.internal.QuasiResolveStage.process(QuasiResolveStage.java:46)

  at org.eclipse.virgo.kernel.install.pipeline.internal.StandardPipeline.doProcessGraph(StandardPipeline.java:62)

  at org.eclipse.virgo.kernel.install.pipeline.internal.CompensatingPipeline.doProcessGraph(CompensatingPipeline.java:73)

  at org.eclipse.virgo.kernel.install.pipeline.stage.AbstractPipelineStage.process(AbstractPipelineStage.java:41)

  at org.eclipse.virgo.kernel.install.pipeline.internal.StandardPipeline.doProcessGraph(StandardPipeline.java:62)

  at org.eclipse.virgo.kernel.install.pipeline.stage.AbstractPipelineStage.process(AbstractPipelineStage.java:41)

  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.driveInstallPipeline(PipelinedApplicationDeployer.java:359)

  ////////////////////////////////////////////////////////////////////////////////////////

  Here are the things I did based on the addition of the gson - 2.2.4.jar to the list of libraries (which I'll use my service module).

  1 added gson - 2.2.4.jar to chassisRackVSphere-service\lib

  2. added gson - 2.2.4.jar to the list of libraries referenced in STS.

  3. fixed the ANT build file to add this jar to the classpath

  < target name = "java-compilation" depends = "clean" description = "do not select objective in-house." >

  < javac includeantruntime = 'false' destdir = fork "${CLASSES}" = "true" debug = "on" >

  < path src = "${basedir} / src/main/java" / >

  <!-< path src = "${basedir} / src/test/java" / > for future test-> files

  < classpath >

  <! - remove this if you are not using the SDK with java - >

  < pathelement path="${VSPHERE_SDK_HOME}/libs/vsphere-client-lib.jar"/ >

  < pathelement path="lib/commons-logging-1.1.1.jar"/ >

  < pathelement path="lib/gson-2.2.4.jar"/ >

  < / classpath >

  < / javac >

  < / target >

  4. fixed the manifest file to include the package gson

  /////////////////////////////////////////////////////////////////////////////////////////

  Import-Package: org.apache.commons.logging,.

  com.google.Gson,

  com VMware.vise.Data,

  com VMware.vise.Data.Query,

  com VMware.vise.Data.Uri,

  com VMware.vise.vim.Data

  /////////////////////////////////////////////////////////////////////////////////////////

  I don't know what I'm missing. How can I add third-party libraries for the service module (in this case chassisRackVSphere-service)? Any help is appreciated.

  Thank you

  Shankar

  You forgot a step described in the FAQ ""How to use 3rd party java libraries?', that is to make your available on the server gson library. "  An excerpt from the FAQ:

  Formatted as OSGI bundles libraries should be in a known location on the server:

  • In development mode you can copy in Server/repository/usr, one of the default directories for the loading of libraries (you must restart the server).
  • If the server is already running you can copy also in Server/Pick-up because the beams will be deployed hot (i.e. without having to restart, but this requires you to deploy your plugin after the library, see Note 2 below).
  • Finally, you can keep in their current location and add a path in server/configuration/com.springsource.repository.properties.
  • In production mode , that your plugin is installed as a plugin package, it is neither practical nor recommended to add libraries to server/Pick-up or Server/repository/usr on your production server. Instead you must include them in the directory plugins of your package and your .war and .jar packages. You will also need to list Bundle-SymbolicName of plugin libraries - package.xml.

• Instructions step by step for the publishing of LR4 services Module

  I used LR since 1.0 and a long comes from flickr, facebook, smugmug, photomatix etc.

  So I think that LR2.6 or 3 LR dating publishing service. I found this time-consuming yes I just buy the EXCELLENT JF-plugins for everything which precedes and they simply work.

  The only thing I have this unused EVER editing module that ADOBE has gone very far to include re - in later versions, as well and I can't imagine that they would continue to something which really sucked.

  The only thing, I can ' t find detailed instructions on the use of this thing.

  Should I first go to FLICKR, SMUGMUG or FB and create the First Gallery

  OH, I just switched to MAC, and I'm still on a shaky ground.

  Thanks in advance!

  Not sure why jf publishes services worked for you, but not the native versions of Lightroom.

  But it seems that your complaint is not in general with publishing services, but the provided Adobe publish service plugins, or a native disk editor.

  In the event that it was the missing link: you create your own publish collections and fill them (put pictures in them, to appear, for example using drag don't fall into a regular collection, or create a smart collection). Note: Ctrl-click right/publishing service and choose (create a folder to publish or create a Collection...). Securities in the context menu to create collections of publication may be different for different services, so that can be confusing, but they all do the same thing: create regular collections or create smart collections, or sets of the collection).

  Good luck

  Rob

• Problem with location Services

  MacBook Pro (retina, mid-2012)

  OS X Version of El Capitan 10.11.4 (15E65)

  Processor: 2.7 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Graphics card: Intel HD Graphics 4000 1536 MB

  When I go to the Maps app and click on the current location, I get the message "cards cannot locate current position." Also when I drag the local weather on the notification bar is not find local weather conditions.

  I have ensured that allow location Services is checked under Security & Privacy Preferences. I signed on iCloud and unchecked localization services enable and rechecked it.

  The only time wherever I can run is if I go to the activity monitor and force them to leave the following processes

  com Apple.GEOD (923)

  via (919)

  This will usually get the time to work and show the current location, but it doesn't work sometimes in the cards.

  I provided the date and time is correct and it is synchronized with the site time.apple.com

  When I go to the time zone in the Date and time it shows the city closest to me marked with a blue dot, and if I go over it it says "unable to determine the current location at this time.

  I had this problem since upgrade to Yosemite to El Capitan.

  I would also like to add that, in my house, I have an iPhone more 6s, two iPhone 5s, an iPad (Wi - Fi only) Air and two iPad 2 air (Wi - Fi only) who have no problems with location services.

  I have this problem too, but in my case if I returned to Yosemite the problem is solve, there must be something in El Capitan.

• Tips for creating an application with web services please?

  I created a simple application for a client who interacts / monitors a device VISA with LV 2009.  The architecture is essentially a state machine with a timeout for VISA calls that retrieve the current state.

  The client asked that the app will also be controlled via the web and asked me to set up a demo with one or two simple functions.  I have the experience to bring charges against the Server Web LV7 model, but not with web services.

  So here's what I did...

  (1) added a line to my application that would inject actions in the state machine.

  (2) created a simple VI pushes these actions in the queue and plans to use it as the Web Service.

  And then I followed the examples for Web Services, thinking that the Web server is running in the same program as the development environment, such as the version LV7.  This doesn't seem to work.

  Could someone give me a quick overview on how best to do that, or to report an article?  I have simple working WS, but here are a few questions...

  @ Jed Davidow:

  We met this difficulty with our web app (LV 2009) as well.  Because now we feel the solution the easiest way is to activate the VI server in your main application (EXE) VI and place calls to its hierarchy of web services in the open Application > VI Open > call by Ref > close VI > structure to close the Application.

  Although we try to minimize the use of the present in web services, it makes sense for some resources shared and accessible throughout the world as references to database, configuration globals, etc.

  I also note that there seems to be an instability that we have not been able to identify which may (or not) be attributed to the use of this technique.  The symptom is LabVIEW from memory immediately at some point.

  I am currently looking into migration towards 2010 LV, and it seems that the same constraints between instances of the application are in place.  I expect that, but I was expecting some more simplified with the next version of LV interprocess communication methods.

  --

  James

• Zip code does not match with the Service request number

  Hello
  I can, check the State of repair of my Xbox to the t.
  It keeps giving the same error (ZIP Code does not match with the Service request number).

  I tried to register the product.
  but it seems impossible, if it has a status of repair open.

  a catch 22.

  Hello

  I suggest you go through the following link.

  http://www.Xbox.com/en-us/

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• While trying to use re set link sent in your email, response is "temporary problem with this service, try again later".

  reset the link

  while trying to use re set link sent in your email, response comes back "temporary problem with this service, try again later" it has been like this for more than 1 month since early December!   Help!

  Hello

  ·        What service provider or of the e-mail client that you are using?

  ·        What version of Internet Explorer you are using?

  ·        What operating system is installed on your computer?

  ·        It happens with all webmail or with any what particular webmail?

  I suggest you to follow the link and check if it helps:

  The problems of access to webmail using Internet Explorer

  http://support.Microsoft.com/kb/2483955

  Post back with detailed information on the issue so that we can help you further.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.