Vulnerability of visibility of the external IP

Similar Questions

• Portege Z830: I want to disable internal LCD and use only the external monitor

  I have a Toshiba Portege z830.
  I use my laptop in "Extended desktop", mode with an external monitor, which is the main display.
  In this mode, the two screens are still on, but I want the built-in LCD screen to be opened only when I use it.

  Is this possible?
  Thank you.

  Hello

  In my opinion, this is not possible.
  In extended mode, you use and display internal but extended and the long part is visible on the external monitor.
  In such a case its any that your external monitor is set as main display.

  If you want to use an external monitor only, you can only export the video signal on external monitor by pressing FN + F5

• Preloader is running on top of the external SWF

  I have a very simple preloader that loads an external SWF. It almost works. :-)
  
  I find that the external SWF appears in the window - good - but the preloader continues to run on top of it - bad. I have attached the actionscript code that is in my preloader...
  
  To see it in action, go HERE.
  
  Thanks in advance!
  -bryan
  
  ================================================
  

  Thank you very much. But I think that I'm not sure why the progress bar is HERE. If the SWF file is loaded and appears in the window, why is the progress bar still there and running? Why didn't he go away? The progress bar is correct, and the SWF file is displayed even if it is only partially charged?

  I finally subordinate the visibility of the external SWF that it is fully charged - so bytesLoaded file< bytestotal,="" then="" the="" swf's="" visibility="" is="" set="" to="" false.="" maybe="" that's="" just="" kludge,="" but="" it="">

  Again, thank you for answering my question!

• Portege M800-106 - bad quality by using the external monitor

  I use an external monitor LG Flatron L1811S on my Portege M800 and find that the image is not rock solid when I use the display on my desktop or screen of the M800.
  It is particularly visible on the big patches of color block where I can see shimmering light. I noticed that it's especially bad if I recently reconnected the laptop to the network after using on battery power until the battery is fully charged.

  This makes me think that the PSU interferes with the VGA output?
  Any ideas?

  Thank you

  To be honest I m more important lack of information in your ad.
  Are you using the native resolution - 1280 x 1024 / 75 Hz on screen?

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• Qosmio F30 - how to get started using the external CD/DVD drive?

  Hello Mr President

  I have a Qosmio F30. My CD/DVD drive does not work. I have the USB CD/DVD drive, but I think that F30 does not support external USB CD/DVD drive to boot to the top.

  Please help me. Now, how can I boot Windows XP CD?

  At first, I must say that I really wonder why you do not have something to trade integrated optical drive. Qosmio F30 is not that old laptop and is perhaps the warranty still valid. You should check with the partner of service authorized in your country.

  For start with external peripheral is not so easy because the external drive doesn't recognize started upward. Theoretically you should either external ODD visible to your Qosmio. For older laptop, it is possible if you start Notepad in pilot mode and load BACK to BACK. After doing this you have access to the external hard drive and can start the installation.

  You can do this with your Qosmio laptop?

• Backup Time Machine greyed out, even if the external drive is attached and backup is present

  Try to restore an old iTunes library and all my music for complex reasons (two on a Macbook Pro hard drive failure, not enough space for iTunes on the SSD space have now). I have a Time Machine backup to an external drive that is plugged, and the backup I need is clearly visible in the Finder. But in Time Machine, it is grayed out and inaccessible. If I try to just copy the iTunes folder, overall I get an error "not enough free space" even if there is lots of space available (119 GB iTunes folder, 165Gb disk space). Any ideas gratefully received.

  System information:

  

  Proof that I'm not a fool:

  

  

  Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• SSH to the external interface

  How to configure ssh on the external interface of the asa? I have defined an applied, external interface access list, but it did not work for some reason any

  Here is a list of access

  interface GigabitEthernet0/1

  nameif outside

  security-level 0

  IP 10.254.17.9 255.255.255.248

  !

  interface GigabitEthernet0/2

  No nameif

  security-level 100

  no ip address

  !

  interface GigabitEthernet0/3

  EIGRP 2008 description

  nameif eigrp

  security-level 100

  IP 10.40.50.65 255.255.255.252

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.251.1 255.255.255.0

  management only

  !

  boot system Disk0: / asa821 - k8.bin

  passive FTP mode

  access-list 110 scope ip allow a whole

  NAT allowed ip extended access list a whole

  allow_ping list extended access permit icmp any any echo response

  allow_ping list extended access permit icmp any any source-quench

  allow_ping list extended access allow all unreachable icmp

  allow_ping list extended access permit icmp any one time exceed

  allow_ping list extended access udp allowed any any eq isakmp

  allow_ping list extended access allow esp a whole

  allow_ping ah allowed extended access list a whole

  allow_ping list extended access will permit a full

  allow_ping list extended access permit tcp any any eq ssh

  access-list extended ip allowed any one sheep

  icmp_inside list extended access permit icmp any one

  icmp_inside of access allowed any ip an extended list

  pager lines 24

  asdm of logging of information

  Outside 1500 MTU

  EIGRP MTU 1500

  management of MTU 1500

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow all outside

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  Access-group allow_ping in interface outside

  Can't say I've seen this before, but SSH is easy to do on the SAA.

  I recommend you to take out the first interface access list to see if that would be it.

  You have published only a partial section of the config, but make sure you have the SSH command with the address of the subnet that you connect from. Your config is no longer visible as I type this but try "SSH 0.0.0.0 0.0.0.0 outdoors. This allows all subnets access to the external interface. This command works as an access list to restrict connectivity to approved subnets. i.e. ' SSH 10.0.0.0 255.0.0.0 out "only allow hosts on the 10.x.x.x network to connect via SSH.

  Turn 'debug ssh' to see what errors are too.

  And, you can always remove your keys (related encryption rsa key) and rebuild their return (encryption key generate rsa 1024 mod gen). This will make your ssh client, I use PuTTY, think that this is a new feature and invites the OK to connect.

  Good luck.

  Kevin

• files and folders invisible after the attack of virus on the external HARD disk

  I have an external Seagate 500 GB HDD.
  Yesterday I plugged on my friend's laptop computer, but her laptop has been attacked. I didn't know it. so I just copied the files on my HARD drive.
  After connecting the HARD drive to my laptop, I've scanned several times, but only one file or folder is not visible in it. And I checked the properties, its display used and remaining memory on the HARD drive.
  Not what happened? I want historical data... How can I make them visible?
  Help, please...

  Hi Muralidharpattar,

  This problem normally occurs when permission for files/folders have been modified and may be hidden.

  Method 1: We will connect the hard drive and try to check if files and folders are hidden or not.

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows/show-hidden-files#show-hidden-files=Windows-7

  Method 2:

  If the problem persists, I suggest you analyze the external hard drive to see if it is operated by the virus and malwares. If you have any antivirus program that is not built, you can run scanning using it. If this isn't the case, you can use the provided scanner.

  Step 1:

  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
   
  Hope this information helps. Response with status so that we can help you.

• If Adobe has disabled the ability to use Lightroom 5.7 to see the images in the external hard drive, how one judge the images in the file on the external hard drive without bringing back them to the Lightroom library?

  JPEG images being dragged over to Photoshop are veiwable as thumbnails on the external hard drive.  However back to the DNG RAW images are not visible.  Anyway is to visualize images of type external hard disk?  It would be nice to get a glimpse of what you make in Lightroom simply looking on the external hard drive you can with JPEG files.

  The library, just click on the import button and navigate to your folder on the EHD. Choose the folder and click Add at the top of the dialog box. You should see thumbnail previews in the import dialog box where you can select what to import.

• Stop the external external SWF sound

  I'm working on the controls for an external swf. The external swf load an external audio file. The structure at the moment is

  extswf.swf contains mcSound that loads soundfile.mp3. extswf.SWF playback starts automatically when it is called.

  movieController contains the icons for the buttons play/pause. This is attributed to CntlClass.

  CntlClass load extswf.swf and control buttons play / pause.

  So far, the play buttons / break stop and start and stop the film, but not the sound. I know that I need to access the sound from the external swf channel and sound transformation allows you to change the volume. We know not how to access this channel.

  The examples that I think have integrated audio files. Also, the examples seem to use the main class for the external swf. My external swf is not a class file, so I have no idea what would be the main class.

  If someone has done this successfully, who would be willing to share?

  you follow my suggestion.  use:

  SerializableAttribute public class CntlClass extends MovieClip
  {
  public var loader: Loader;
  public var movie: MovieClip;

  public void CntlClass()
  {
  loader = new Loader();
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, movieLoaded);
  Loader.Load (new URLRequest ("extswf.swf"));

  mcPlay.buttonMode = true;
  mcPause.buttonMode = true;
  mcPlay.visible = false;
  }
         
  public void movieLoaded(event:Event):void
  {
  film = MovieClip (loader.content);

  loader.removeEventListener (Event.COMPLETE, movieLoaded);

  stage.addChild (movie);
  mcPause.addEventListener (MouseEvent.CLICK, pauseSWF);
  }
            
  public void pauseSWF(event:MouseEvent_=_null):void
  {
  Movie.Stop ();
         MovieClip (loader.content).channel.stop ();
  mcPlay.visible = true;
  mcPause.visible = false;
  }

  In extswf.swf:

  var req:URLRequest = new URLRequest ("noise.mp3");
  var sound: Sound = new Sound();
  channel: var SoundChannel = new SoundChannel();

  function soundLoaded(event:Event):void
  {
  sound.removeEventListener (Event.COMPLETE, soundLoaded);
  channel = sound.play().
  channel.addEventListener (Event.SOUND_COMPLETE, otherStuff);
  }

  function otherStuff(event:Event):void
  {

  Channel.Stop ();
  channel.removeEventListener (Event.SOUND_COMPLETE, otherStuff);
  }

  sound.addEventListener (Event.COMPLETE, soundLoaded);
  Sound.load() (req);

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

• Starts the Powerbook g3 pismo of the external drive?

  Hello, all,.

  
  

  I want to start my Powerbook G3 (Pismo) running OS 9.2.2 since the restore in one disc external hard drive. (PB knows he has a drive hard internal , but the drive does not read discs in there.) The computer goes up the disc - its own restore disk - when it comes starts with Macintosh HD as a player start, but when I try to use the restore disc as commissioning, starts to drive to go up, but the door opens. Even if I hold the door closed, the computer starts low to halfway and glued in place: first, the question mark flashing, then commissioning with Macintosh HD but then freeze it.

  This happens even if I chose as the startup disk restore disk in the startup configuration panel. This means that I can't even begin to use disk utility to clean the hard drive of the computer. I did that with two other computers (reset several times), but those who had internal functioning disks. Is it possible that I can do this computer using the external drive as the boot? I read that the G3 Pismo that allows. I know I can get someone to take out the hard disk and smash, but I expect much prefer to destroy it myself. And I can understand how to remove the hard drive, but it seems to imply a boatload of maneuvers and some tools that I have, at the present time. I would not completely destroy the computer. It would be good for recyclers to be able to retrieve some parts, though they might be useful to someone.

  It is possible that I can't boot from the restore disc in the external drive, but maybe there's something that I have not yet tried. It seems crazy that the external hard drive with the restore disc appears on the desktop with a normal restart, and I can choose as boot drive but can't seem to complete commissioning. If anyone has any ideas on this subject, I would appreciate it a lot.

  Thank you.

  Jenny

  Are you trying to boot the PowerBook to an external optical drive that is connected to a USB port or your external drive connectivity FireWire?  If it is USB, that is the problem.  The reading of an optical drive connected by USB is one thing, but start since it is a different matter.  Unfortunately, your Pismo is not capable of this.

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.