vWorkspace 8.0 | HyperV 2012 R2 | < Unspecified > virtual network name

Similar Questions

• HyperV 2012 SMV "off the power" does not appear in the converter 6.1.1

  Hello

  Environment:

  HyperV 2012

  VMware Converter 6.1.1

  VMware 5.5

  I want to convert all Hyper-V in VMware virtual machines

  A virtual machine worked without any problems! Power off of the virtual machine and do normal "conversion process" - all right, but all the other VMS does not appear in the converter as soon as they are "off".

  I start VMware Converter

  -Convert the Machine

  -Source HyperV - Server (Powered off)

  that shows me all the virtual machines on the Hyper-V environment. As soon as I turned off one of the virtual machines that VM is endangered. I see not the virtual machine until I have restart the virtual machine.

  All ideas

  Thank you.

  Hello

  so, finally I had to delete all virtual machines to Cluster Hyper-V role, restart the converter on the Hyper-v host Agent, and then everything went well.

  Thanks for your help!

• vWorkspace 8.0 Server 2012

  Do we have to have installed Microsoft remote desktop services farm and running before install us vWorkspace 8.0? The reason why I ask is, when I tried to install the guest role of vWorkspace on Windows Server 2012 Session, he informed me that I have to install Microsoft Remote Desktop Services Session Host installed before the vW. VWorkspace not install and activate all the roles on its own?

  Hi Dejan,

  You don't have to install the Microsoft RDSH role on your server Windows 2008/2012 before installing as a host of Session vWorkspace. VWorkspace installation package will do this for you.

  Kind regards

  David

• Check Point virtual network adapter for SSL Network Extender

  I just downloaded an update recommended for Windows 10. After updating downlaoded, whenever I start my computer it say compatibility assistant this app is not working properly try to reinstall Check Point virtual network adapter for SSL Network Extender. Why do I get this notice? I have no problem getting on the internet. I have a modem and a router that work well with all my devices. I use an ethernet cable, nothing has changed in addition to the recommended update.

  I thought I would try devices and adapters Manager double click Network and looked for updates. Updated and now I don't get notification any longer.

• How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  I have a virtual network adapter that is created with Broadcom.

  This virtual interface named "BASP eCard" visible on the performance monitor in the category 'Rhythm Pipe' but not in the category "Network Interface".

  This is problematic because the Tx and Rx (bytes received/send in second) is available in "Network Interface" that show physical network cards only.

  Someone has an idea?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Lack of EAP = PEAP (Protected EAP) in windows xp sp3 trying to create virtual network tomy office.

  I'm trying to create the virtual network in my office and the dropdown under the security of network connections authenticatication tab the list drop-down option to authenticate "= Protected EAP (PEAP) EAP is missing. I need to select this option to connect to my office according to the documentation provided by them.

  I m in a situation where I need to connect and work. Office staff not support this problem because it is my laptop at home.

  If please suggestions for install or upgrade or solutions to this would be greatly appreciated.

  Thanks in advance.

  Regads venzy

  Hate to tell you but PEAP is not supported by nature in windows XP. You must purchase and install a version of 3rd party drivers.

• Ea6400: virtual network

  Once more a question and then I think my router is perfect

  I have some IP cameras on my WiFi network.

  When I want to see them out I had to do a virtual network on my old router.

  When I go to Conectifity > Advanced routing

  I see that NAT and RIP

  Static routing is not the same as in the old router.

  But how I do on this one?

  Thanks for the thought.

  Hi taxikemperman. I agree with what proposes FurryNutz. You need to forward ports to access the cameras remotely. You can also register for any server domain so that you can easily access the camera outside your network. I would also say that you set a static IP address on each of the wireless camera, so you can correctly determine which cameras, you are trying to access.

• Virtual host name

  We have one Equallogic running on a PS4100. I'm relatively new to the learning system so even my way around it. This could be a simple query.

  My question is this: we have an old server with 4 TB of data storage. Call the SERVER1. It is retirement due.

  I would like to move that data to the Equallogic, where I have plenty of room for it.

  However, we have many, many customers running many readers mapped to SERVER1. Instead of remapping all, which will have an age, y at - it a facility inside SAN HQ or group leader to give a virtual host name (which will be "SERVER1") and intellectual property to a volume? Pretty sure that our former NAS system a few years back was able to do this.

  For customers, the transition would be seamless - they would always connect to the same host name, only it is now hosted on the Equallogic rather than being a stand-alone server. I need to update the DNS entries and turn off the original Server1 completely of course.

  Hello

  # The berries of the PS Series by themselves are just s SAN storage device that use the iSCSI Protocol to connect servers to storage. .  They are not the NAS file servers on their own.  Dell offers a NAS device that fits completely into the SAN PS, known as a FS7600.

  Kind regards

  Don

• Software exists for the creation of a 'virtual' network card and going to all the traffic on the local network through a proxy server, then by this adapter?

  I can access net through LAN and my college requires a proxy for all access to the internet. If you want to use the internet, it is impossible to do not use a proxy. This is a problem for many programs that do not seem to allow you to enter the proxy settings.

  any software is to create a 'virtual' network adapter that will pass all traffic network (or any protocol x traffic) through the proxy?

  So I have do not need to enter the proxy anywhere... and I have normal internet access.
  What I saw is possible with OpenVPN, but it is a vpn service that I need .i just want to use the feature. In OpenVPN I just enter my proxy server in its framework and OpenVPN to connect to a VPN service and routes all traffic to the FAUCET adapter after which I don't need to set the proxy address anywhere... so my idea is how can I use only the last part that is routing all my LAN traffic to a virtual card.

  Support the LAN---> proxy---> virtual adapter--->, then software I access the net

  That's what I like to do...

  Although I am facing this problem on Windows 7, solutions for all operating systems are welcome.

  P.S: Proxifier is not my solution to not offer something like this.

  Hi Sapan,
  Thanks for posting in the Microsoft community!
  You can use your favorite search engine and look for the software that meets your requirements.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• VIRTUAL network interface routed, is this possible?

  I have a 3560 which hangs a 6509. The next SVI s direct on the 3560:

  192.168.181.1(VLAN 192.168.180.1 (VLAN 180), 181), 192.168.182.1 (VLAN 182), 192.168.183.1 (VLAN 183), 192.168.184.1 (VLAN 183).

  I have the following routed interfaces between the 6509 (192.168.0.17/32 and the 3506 (192.168.0.18/32).)  Currently, I use a gateway of last resort to get the traffic off of the switch and a static route to send traffic to these IVS.

  I have a few VLANS that I use for vSpere and traffic of ESXI (239 (vMotion), 243 (Fault Tolerance), (250, iSCSIStorage), 254, ESXi), 255 network management).

  Is it possible to send these VIRTUAL networks through the routed interface?

  I have a few guests of ESXi requiring 254, 239 and 243 for vSphere features.

  Short answer is with the equipment you have not you cannot.

  What you can do is-

  (1) create a new vlan purely for the link between the switches and create an IVR for this vlan on each switch.

  The IPS for the Lass will be the IP addresses that you currently have on routed ports.

  (2) the link is a link to trunk and leave the new vlan and a VLAN that you want to extend for example. between the switches.

  The important thing here is to allow only on the trunk link the new vlan, and the VLAN that you extend.

  (3) the VLAN that you not extend ie. VLAN 180, 181 etc are not allowed on the trunk link and therefore will be always sent between switches across the new vlan because the Lass for this vlan have the IPs had initially allocated you to the ports of L3.

  Jon

• PIX 515e, multiple VIRTUAL networks on a physical interface to DMZ

  We try to set up multiple VIRTUAL networks on a physical interface to the DMZ on a PIX 515e.

  The goal is to have logical subnets linked to our single, physical interface DMZ.

  Here's what I've tried so far without success:

  The switch

  -created the vlan 30

  -added switchports fa0/1 to 30 of vlan

  -attached host 192.168.100.1 in fa0/1

  -added switchport fa0/24 to the vlan 1 and vlan 30 with multimode

  -interface PIX DMZ connected to fa0/24 switchport

  -attached host to switchport fa0/10 172.16.1.55 (vlan 1)

  PIX:

  Auto interface ethernet2

  logical ethernet2 vlan30 interface

  nameif DMZ security50 ethernet2

  nameif vlan30 dmz2 security50

  address IP DMZ 172.16.1.254 255.255.255.0

  IP address dmz2 192.168.100.254 255.255.255.0

  Results:

  -172.16.1.55 has full connectivity to the PIX and beyond.

  -192.168.100.1 cannot ping the PIX to the 192.168.100.254 or anything else besides.

  Any help would be greatly appreciated. Also, I realize that I could buy a four port NIC and use the physical interfaces, but I can't get the approved purchase.

  Thank you

  Creation of VLANS on Ethernet1

  We want to create a new interface VLAN - VLAN30 and name DMZ2. Also affect the security level 50 in it.

  Step 1: Create a physical Interface:

  PIX (config) # interface ethernet1 vlan2 physical

  Step 2: Name the Interface and set the security level:

  PIX (config) # nameif ethernet1 inside the security100

  Step 3: Assign the IP address of the interface:

  PIX (config) # ip inside 192.168.1.1 address 255.255.255.0

  Step 4: Create the logical Interface:

  PIX (config) # interface ethernet1 vlan30 logical

  Step 5: Name of the Interface and set the security level:

  PIX (config) # nameif vlan30 DMZ2 security50

  Step 6: Assign IP address to the interface:

  IP pix (config) # DMZ2 192.168.100.254 255.255.255.0

  Step 7. Switch, set the port where from the inside, to the Isls or dot1q physical interface. Place the sheath in the native vlan2 as in step 1.

• After uninstalling the grid Infrastructure: virtual host name [INS-40912] assigned to another system on the network

  Hello

  I deleted successfully installed grid Infrastructure software. Now, I installed again it but the installer complains about '[INS-40912] virtual host name assigned to another system on the network", which he complains not in the first installation process. :/

  EDIT: I checked and both nodes of the cluster are interpingable through their virtual IP address.

  I see that the previous installation has created a clean interface for this virtual IP address:

  eth0:2	Link encap HWaddr 00:50:56:B9:0E:AA
  	INET addr:10.200.11.159 Bcast:10.200.11.255 mask: 255.255.252.0
  	RUNNING BROADCAST MULTICAST MTU:1500 metric: 1
  	Basis of interruption: 19 address: 0x2000

  OK solved: I just do:

  ifconfig eth0:2 down

• Virtual network editor - virtual DC leak on network

  Hello

  I created a laboratory to test of windows server 2008 in vmware workstation 11. I put the custom virtual network adapter:

  

  I've got 2 VMs - windows server 2008 and win7. I tied VMnet2 both of these machines and created the field and join a windows 7 virtual computer to the domain. Great! but I have 1 problem. I put my IP to domain controller: 192.168.123.10

  But I can ping this address of the host (laptop) machine. is this normal? I thought about creating above network settings would completely isolate the physical network. Did I miss something or wrong configured network? I don't want the virtual network of VM fleeing somehow to the physical realm. I can't risk having 2 DCs on the network.

  

  so simple answer was watching me in the face. Just had to untick "connect an adapter to the virtual host on this network.

  For those looking to implement an isolated test lab windows domains, these are the settings you need.

  Thank you

• Bind Virtual Network Interfaces to the physical Interfaces

  Good day to all.

  My situation is as such:
  

  I have a virtual machine running Red Hat Enterprise Linux as guest OS and my host machine is a laptop running Windows 8.1. Each operating system has two network interface cards. I want to place the virtual machine on the line between a router that would be on the left (side Intranet) firewall followed by Internet on the right (side of the internet). I hope there is an option that would allow me to effectively "bind" one of each virtual NETWORK adapter to each physical NETWORK adapter, so that when I place the machine host on the network line, it would be like the VM would be online also. So, basically I want to accomplish what is highlighted in RED in my small figure above.

  The full rectangle is the guest OS with its two network cards on each side, and the incomplete rectangle is the host device with its own two network cards on each side. I hope that someone could point me in the right direction, it would be greatly appreciated.

  VMware Player, "Configure the adapter" parameters are indeed not unique for each virtual interface. You use VMware Workstation to meet your requirement. For workstation, you can create two VMnets and link your two adapters to them, then connect your two cards in the comments to the VMnet respectively

• Easy way to export and restore the virtual network editor in 10 workstation

  I'm looking for an easy way back up and restore my settings of the virtual network Editor. I use Workstation 10.0.3 on Windows 7 64 bit and have several networks configured on different host machines. After Googling for the problem, I found the following:

  -on a Linux host, the settings are stored in/etc/vmware/networking. However, I am not able to find the file in Windows. Source: http://serverfault.com/questions/535193/vmware-workstation-how-to-automate-or-script-changes-to-the-virtual-network-co

  -on a Windows host, all parameters could be saved through export of certain keys in the registry. But these keys are at least partially unique on each host, and it would be a real pain to get the keys on each host individually. Source: Re: VMware WS configuration backup

  -vnetlib control should support a statement "-export" which creates a text file containing the necessary information. However if I try to run the command, as described in the link, no file is created on my machine. The command must be ' start/wait vnetlib.exe - export path_to_file' (I am running this command of in the workplace, of course installation directory). I also tried "vnetlib" - path_to_file to export, but that did not help either. I know that vnetlib works because I reinstalled successfully the vmx86 with vnetlib service - install. If also tried the vnetlib64.exe, but no luck. Source: Re: virtual network editor

  So is - someone of you knows how to solve my problem? I'm looking for a way to write a simple batch script that exports the settings without having to deal with the registry. My virtual network Editor loses its configuration from time to time and I don't want to set up everything by hand again.

  Thanks in advance.

  The instructions on my site still fit for WS 11
  sanbarrow.com ~ Index

  on a 64-bit host export settings like this
  "C:\Program Files (x 86) \VMware\VMware" _-_ export f:\ws-networkbackup.txt
  Note the syntax:
  _ should be a space
  -is not a unique dashboard but 2 x less

  You can import this backup again if you replace import export.
  Use a commandprompt with high fees - (run as admin)

  The settings for the vmnetbridge service are stored in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetBridge

  The VMware DHCP written in
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetDHCP

  The NAT service written in
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMware NAT Service

  The vmnetuserif service is required, but there is nothing to configure
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetuserif

  There are also the vmnetadapterservice but there is nothing to configure

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetAdapter

  Less important entries go to
  \VMnetLib HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\VMware, Inc.

  Also note for DHCP and NAT conf files:

  netmap.conf

  vmnetdhcp.conf

  vmnetdhcp. Leases

  vmnetdhcp. Leases ~

  vmnetnat - mac.txt

  vmnetnat.conf
  They can be found in C:\ProgramData\VMware

  For your reference, I have attached a dump of vnetlib64.exe and the registry for the service vmnetbridge

  Ulli