vWorkspace 8.0 Server 2012

Similar Questions

• vWorkspace 8.0 Server 2012 Cluster Shared volumes

  Hello

  Is it possible to force vWorkspace broker see CSV on Hyper-V storage for a model/placement VM storage? Clustered storage is located on C:\ClusterStorage\ folder on Hyper-V servers sentencing. I have two Hyper-V nodes in a failover CSV storage configuration.

  Thank you

  Dejan

  Hi Dejan,

  Please see the following documentation on the use of CSV storage.

  

  Concerning

  Paul

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• Level broker for connections to windows server 2012

  Dear,

  I would like to know if there is any risk that the upgrade of the OS of the server holding the broker for connections, web access and management of the profile of windows server 2008 R2 to windows server 2012 or more to enable support of HTML5 connector? Please tell us what is the scenario for these updates.

  Concerning

  Hi Habibgha,

  Hoping to upgrade the OS on-site? It should work, but I don't know if it has been tested. Assuming that your infrastructure servers are virtualized, perhaps you could take a snapshot or clone this virtual machine and try in a lab environment?

  Or you can work on a step-by-step approach, the first stage being, if your current farm is 8.0.1 you can upgrade all roles on your current server on 2008 R2 for vWorkspace 8.5, then build a new VM with 2012 R2 and install IIS and access to the Web of vWorkpace role. Create a new vWorkspace site web access on the new server just for the connector of HTML5.

  I hope that helps!

  Thanks, Sam

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.

• ProLiant DL320e with Windows Server 2012 Bluescreen

  Hello

  I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".

  I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
  
  I found some knowledge which mentions screens blue and with the driver for Smart Array
  http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
  But the update and version numbers do not match.

  Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.

  I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.

  The servers are offline on a clients site in a restricted environment so that they lack updates online.
  
  During this time, I downloaded the SPP Service Pack for Windows Server
  FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
  
  Does anyone have pointers?

  Take care

  Martin

  Thank you, I have not found this forum. If an admin could move it which would be best.

  Just in case anyone else has this problem is this question:

  I contacted HP by telephone support and the solution is:

  Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Take care

  Martin

• HP proliant ml310e gen8: can't the Nic Server 2012 team

  Hello everyone hope everyone is great

  I have a hp proliant gen8 ml310e I have a problem, do the 2 Nic set interfaces

  I tried 3drivers the

  1 Microsoft driver by default with windows server 2012

  2 broadcom driver the latest driver directly from the Broadcom website

  3 hp driver from the drivers from the Hp site for this model

  When I go and try to create a Nic team a mistake occurres and Nic fails creative team I also tried doing it through power shell operation has expired: TeamNic installation has not completed on time.

  I tried a clean format

  System specs

  HP proliant ml310e gen8

  Broadcom NetXtreme Gigabit

  Server Windows 2012

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.

  http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vp1hReT2bGg

• Satellite C660 - 1 DG-drivers of Windows Server 2012

  I started Windows Server 2012 (for development purposes).

  Now... where can I find the drivers?

  * display driver *-lets start with the display driver (for the Intel Graphics Media Accelerator HD) when I look for the display driver in the support forum I only find the driver of Intel for Windows 7, but there is none yet for Windows 8? -Installed Windows 7 driver - works ok :)
  * sound driver * -.

  What drivers Miss do you?

  Fact is that Toshiba offers all drivers for supported operating systems.

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Why my Win Serv 2012 std (hp ROK) do not settle on my 5.5.0 esxi?

  Hi people,

  I am a beginner, so be patient with me please.

  My company bought a proliant DL385p Gen 8 and it came to pass with support of dvd windows server 2012.

  The media label says:

  "Windows Server 2012 Recovery Media for Windows Server 2012 ROK products for HP Proliant Servers"

  I'm trying so install windows 2012 with this media in my Esxi 5.5.0, but the installation starts I get a message saying tha windows must only be installed in the hp machines.

  My doubt is that I am under esxi custom hp: VMware-ESXi-5.5.0-1746974-HP-5.72A.3-Jun2014.iso

  Why my windows does not recognize that I have do its installation on an hp machine?

  How could I solve this problem? Could I download another image of windows and activate it with my key product?

  Best regards

  You can get more help on the forum specific Proliant here:

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VCIs4PldXuI

• OfficeJet 6700: Officejet 6700 Premium driver for Server 2012

  I need to connect this printer to a Windows Server 2012 R2.  There is no driver for this version of the OS on the driver download page.  Is one of the other compatible drivers?  Is there a driver available somewhere?

  Hello

  The extraction of the installation is complete, the incompatibility alert is displayed only after the installer extracted.

  Using any program for example extract 7z or Winrar as document attached to my previous post guide you within the following section:

  Customize Setup > step 1: copy the driver and software files > second method: copy the files from the web Pack

  In addition, you can click on the Windows Logo and the keys R on your keyboard and type folder in the Run dialog box, and then press OK.

  Open the installation folder that begins with the charadters (e.g. 7z1234) 7z, threshold there find you any required MSI file.

  You can copy the entire folder to another location for easy access...

  Kind regards

  Shlomi

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• T61 - Datacenter Windows Server 2012

  Hi all

  I need to install Windows Server 2012 Datacenter with Hyper-v installed on a Thinkpad laptop, because it is more durable compared to others, and I am planning buy Lenovo ThinkPad T61 with following specifications:

  Hello

  Looking system requirements here on the website of Microsoft, it seems that the T61 meets the system requirements to run Windows Server 2012, but it's largely because Microsoft does not seem to differentiate between the requirements for the Foundation, Essentials, Standard, and Datacenter editions.

  Personally, I would suggest to go with the bigger, more quick 2012-vintage (or most recent) laptop that I could find, for example a W520 or the W530.

  Kind regards

  Aryeh Goretsky

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.