vWorkspace and VMWare 5.1 update compatibility 2

Similar Questions

• CUCM 8.6 and VMWare ESXi 5.0 compatibility

  Hello guys.

  I intend to install CUCM 8.6 on VMWare with 5.0 ESXi hypervisor. On the wiki page of cisco on virtualization for UC I found that information on the compatibility with the hypervisor, ESXi 4.0 or 4.1.

  So my question is:

  -Does anyone know about the compatibility between 8.6 CUCM and ESXi 5.0?

  S ' there is no document on installion CUCM 8.6 on ESXi 5.0 you can send me a link?

  Thanks /.

  He did not complete the test again, this is why you don't see it on the DocWiki. You must continue using ESXi 4.1.

• VMware Fusion 7 and VMware Tools - leak memory in Debian comments

  At some point during my updates from Mac OS X to Yosemite, VMware Fusion to 7.x and my Debian a guest to 8.0 "Jessie" on my 2012 Mackbook Pro, leaking memory of the Linux kernel is developed.  If I follow these steps, then I'd lose soon about 3 GB memory of the core area.

  1. Install Debian Jessie in a new machine virtual de VMware Fusion
  2. Install open-vm-tools or VMware Tools bundled.
  3. Perform an intensive IO as operation simply cat/dev/zero |-c 1000000000 head >/tmp/test.txt.
  4. Smem - wtk and see ~ 3 GB memory under the dynamics of the kernel memory, benefit.

  I opened the 15709682007 assistance request and the representative said that they will fix the problem in a future release. In the meantime, I have what seems to be a workaround for someone else that is affected.  Basically, pulling packages from backports jessie seems to have solved the problem.  This is based on the comments added to open-vm-tools.

  1. Add the Debian repository -backports jessie in /etc/apt/sources.list
  2. sudo apt - get update; sudo apt - get install t Jessie-backports open-vm-tools-dkms open-vm-Tools-Office
  3. sudo apt - get - t jessie-backports dist-upgrade (install kernel 4.1)
  4. Restart comments

  A few quick thoughts:

  1. If you have several virtual machines (or other programs) running on your computer host and VMware Fusion detects that there is memory pressure on your host computer, it uses the "balloon" (vmw_balloon for the latest distributions of Linux) Guest pilot to fly some memory of the guest OS.  This memory "stolen" would appear as memory Dynamics non-cache kernel inside the guest.  Running "sudo rmmod vmw_balloon" should release all memory climbed to the guest OS.  Note that using the balloon driver generally improves the performance of the guest and host, despite the appearance of fear "used memory" inside the guest-"used memory" is just a thing of accounting that we had to use in order to change the priority of the memory between the host and the guest.  It is not "used" in the conventional sense of the term.

  2. I believe that recent versions of virtual hardware non-cache dynamic kernel allocate the necessary memory for SVGA and 3D features (display RAM, texture RAM, etc.).  Disable graphic 3D acceleration or by reducing the amount of graphics shared memory if you are using a new version of virtual hardware (both in the VM > settings... > display) might help.  Decommissioning of a virtual equipment as early (in the VM > settings... > compatibility) can also help.

  See you soon,.

  --

  Darius

• vWorkspace and Foglight integration not working

  Hello

  When I click on the diagnosis and the monitoring tab for any element (datacenter, virtual computer users) in vWorkspace I get the following error.

  See not found: system:vdidiagnostics_vmware_consoleintegration.viewCIVMWQuickView

  The Diagnostics tab and real monitoring itself works fine and opens my Foglight homepage without problem (I have installed on a separate virtual computer foglight)

  vWorkspace version is 8.0.306 and Foglight Foglight virtualization 7.1 trail verison.

  Any help would be appreciated.

  Thank you

  Andrew

  Hi André,.

  Foglight for. Virtual desktop (v5.6), which is now supplied with and integrated with vWorkspace and Foglight for v7.x virtualization (VMware) are similar but different products.

  If functionality (and URLs) supported in a single product do not work in the other. vWorkspace is hardcoded to work with Foglight for virtual desktops.

  If you have ITS current for vWorkspace, you are entitled to a copy free from Foglight for the virtual desktop, which takes in charge the two Hyper-V and VMware hypervisor infrastructure + followed by the components of farm vWorkspace.

  Kind regards

  Rick

• Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.

  Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.   Anyone know if it's related to Adobe or Outlook?  I am able to send emails on Outlook.

  Thank you

  Hi lorid74531323,

  Latest version of MS office will not work with your Acrobat 9.

  May be a compatibility issue, please check the web browsers and applications of PDFMaker

  Kind regards
  Nicos

• AX4-5i con VmWare 4.1 update 1

  Hola,

  Quiero instalar VmWare 4.1 update 1 use AX4-5i ISCSI almecenamiento, donde puedo find TR sabeis como una are compatible?

  Saludos.

  Debes criticas has the storage para revisar Sección:

  http://www.VMware.com/resources/compatibility/search.php?deviceCategory=San

  Por lo veo, TR than are compatible hasta version 4.1 U1

  Saludos,

• VMware Tools obsolete. update problems

  I use VMare Fusion on my MacBook running 10.6.4 2.0.6; Windows OS is XP Home Edition SP3

  I find more applications that previously did not work well in OSX now running on my MacBook (i.e., various applications of Garmin) and I rarely starts in Windows.

  However, not long ago I started in the Windows and saw the alert, "VMware tools is obsolete. Choose Virtual Machine > install VMwre Toold Menu. "I did it and it failed miserably. I lost tools completely, everything was a bloody mess.

  I moved my folder of the Virtual Machine to a backup on my MacBook to MacBook; I'm back to a point where everything is fine but I am also, of course, get the "VMware tools is obsolete. Choose the Virtual Machine. Installing VMwre Toold Menu. "

  When I choose "VM Menu > install VMwre Toold", I get this alert: you cannot install the VMware Tools package until the guest operating system is running. If your guest operating system is not running, click Cancel and install the VMware Tools package later.  But if I did the merger and then logged on to Windows, the comment system IS running; or am I missing something here?  My problem arises because I ignored this warning the first time I saw and click OK.

  Some good soul has the time and patience to explain what I'm obviously missing here so I can do and to update the VMware Tools?

  Thanks a lot, a lot, if anyone can

  Carl1 wrote:

  Among the choices there is VMware and VMware Tools 64 tools. On those who so that I should choose, please?

  Just run setup.exe

  Post edited by: WoodyZ

• Re-design of the QA? How would you with AIX backend DB servers and VMware?

  Hi all

  Was asked to re-design of our QA here environment to the company that I work... It is a gesture of challenge will be a heavy task to accomplish... But currently, we have a whole list of requirements that must be met. We plan on using VMware to facilitate the provision of virtual machines on the side things Wintel and we also AIX in the backend for database for Oracle Rack servers, etc... The question I have to ask the community is... How is your configuration of the QA environment as in your business? What is current tread? Completely isolated? Create a subdomain in your current production environment and mix the two together that could be scary for me?  What is the best practice to implement appropriate QA environment before placing the code or upgrade software before he hits the production as a security guard? The other challenge also lies in the AIX servers and they cannot be updated as easily and quickly as VM servers.

  Thoughts anyone?

  Firewalls and ACLs.

  -Matt

  VCP, vExpert, Unix Geek

• High resolution monitor and VMware Workstation, causing the system to hang

  I usually like VMware / WS... I used VMware / WS for many years with problems little / not serious - until recently.

  I'm under WS 6.5.1 on MS/Windows/XP/Pro/SP2 (host), and 2 guests of virtual machines: RHEL4 and MS/Windows/XP/PRO.

  Recently I bought a SAMSUNG T260 (1920 x 1200) high-resolution screen - I really like (I also used SAMSUNG monitors for many years with little / no serious problems).

  Currently, I am frequently (several times a day) see the two VMware / WS (all guests) and my XP any host COMPLETELY FREEZES up.  The only way out of this is perhaps a shutoff of the system and then restart.

  Needless to say it is (IMHO) a OFF THE CHARTS SERIOUS PROBLEM... with all fingers pointing to VMware / WS (TBD).

  Previously, I was running on a HP low resolution screen 1280 x 1024.  I can run for days/months/still without seeing the problem above.

  Also, I believe many/most/all lower resolution monitors is likely no other problems (be it).

  This is a 'system to freeze the scenario:

  1 pass to MS/Win/XP vm host RHEL (mode full-screen)

  2. press quickly on full screen non-plein screen

  3. If I do the above too fast my entire army system freezes up.

  Any body else see something like that?  Any ideas/help/suggestions will be appreciated.

  Mark

  PS/BTW - I've seen this problem originally under 6.0.3

  Are you running the latest drivers for your videocard host?  Video drivers are complex enough that they almost always end up containing pretty serious bugs and VMware video cards use is broad enough for us fires frequently these questions.  If upgrading the drivers didn't help not can you let us know:

  -What graphics card and cpu type is your host machine?

  -Don't you update of tools in two virtual machines?

  -What is your workload, particularly in the XP VM?

  -3D acceleration enabled in the XP VM is?

• My id does not and I want to update my applications

  my ID does not and I want to update my applications

  Until your ID Apple is set, you cannot update your applications.

  Try here: https://iforgot.apple.com

• Firefox downloads to date, but when I restarts his stays in the previous version and starts to redownload update again. IM on version 38

  Firefox said I can update. After I download update and reboot it is always on the same version and starts to download update again. IM on 38 channel update version beta version

  38 of Firefox is the current version.

  • https://www.Mozilla.org/en-us/Firefox/38.0/releasenotes/

  Your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.
  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  • http://KB.mozillazine.org/Preferences_not_saved

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• How to fix stuck battery and automatic when restart updated ios 9.3.3

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  Lambung writes:

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  What do you mean battery stuck?

  the basic troubleshooting steps are: reboot, reset, restore from a backup or restore as a new.

• After the crash and 32.0.3 update I can't recover lost tabs

  Due to the failure of my pc crashed while I was surfing.
  After the reboot, I restarted Firefox and unfortunataly it did update. However, after the update I couldn't choose reload tabs/reload the previous session. I got the sessionstore.bak files and I tried to recover my tabs replacing the .js extension but on startup there is not possibility to restore the session/tabs: firefox simply replaces my sessionstore.js.

  It is a problem of corrupted files or updating changed somehow handling tabs or sessionstore.js format?

  Thank you very much for your help!

  Restore previous Session is grayed out? This indicates that the previous session already has been restored and you can try to reopen the windows closed and closed in the history menu tabs. Either:

  • button '3-bar' menu > history > (title of the individual window)
  • (menu bar) History > recently closed Windows > (title of the individual window)

  If there's nothing there, you can check two other things:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window list all your settings files.

  Scroll down and copy all the files starting with sessionstore to a safe place for an eventual recovery.

  Made sessionstore.bak -datetime - created during your last update of Firefox - look as if it might contain relevant data?

  Find all the additional files, such as sessionstore - 1.js or other numbered files? If so, which indicates that Firefox cannot write to the main sessionstore.js file because it is locked or corrupted, and your windows/tabs are saved in a numbered file. Unfortunately, Firefox may not actually restore all files automatically. In this case, I believe that you must delete the sessionstore.js file (after the release of Firefox) and copy the last numbered sessionstore.js file.

  If none of these pans, you can check if your sessionstore.js file stored Firefox in a restore point. Right click on the file > properties > Previous Versions. If you find something promising, make sure that Firefox is closed before restoring it.

• A certificate of security for "Adobe Acrobat" was surpassed in July and he asked to "update" of my computer... I refused... a good answer?

  I had a request to update Adobe Acrobat until I'm on the internet. When I questioned the information, he displays a certificate that expired in July. I left all. I did the thing correct and safe?

  It is his somewhat suspicious.

  To update Adobe Acrobat or Adobe Reader, I suggest using the menu inside your Adobe product and then "Check for Updates". This should appeal directly to Adobe and let you know if you need an update.

  I would point out that if you use plugin checker Mozilla (https://www.mozilla.org/plugincheck/) Web site, it only considers the Reader/Acrobat XI (11) to be updated. If you prefer Reader/Acrobat X (10), you must rely on internal auditor updated Adobe instead of Mozilla.

• Is there a way in which I can download iBooks content directly to iCloud by car through my device (iPhone or iPad) without the use of a Mac? If it isn't, I suggest and ask for an update which includes my needs inside. Thank you

  Is there a way in which I can download iBooks content directly to iCloud drive through my device (iPhone or iPad),without the use of a Mac?

  Otherwise, I suggest and ask for an update which includes my needs inside. Thank you

  See synchronize ePub, Books author iBooks and PDFs with iBooks and iCloud - Apple Support.

  TT2