W32tm Windows Server time is off by 3 minutes. Perhaps.

Similar Questions

• Help! Window 2008 server R2 and R2 2012 window server time synchronize the difference

  Hello Sir/Madam,

  Help! I have a pair of window Server 2008 R2 and a pair of window Server R2 2012, who are the synchronization of time to one destination.

  After that time synchronization is successful, the window Server 2008 R2 clocks are still 1 second faster than those in the 2012 window servers.

  Is there anyone who got the same problem as me?

  Thank you.

  Kind regards
  Samuel

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Clean installed and active Windows 8 signed me off every 10 Minutes guest "you are about to be signed within 30 seconds.

  Hi all

  I have reinstalled Windows 8 on one of my Acer laptop which came with OEM Windows 8. Because the key Embedded BIOS, install never asked for a key. After you have installed the wireless network driver, the computer is connected to the internet and glass get immediately activated. However, the system alerted me 'You are about to be signed in 30 seconds' shortly after and rebooted itself.

  I guess it was because that the limitation of the inactive windows (when I connected first of all, I have not get Windows activated due to no internet), so I let it reboot and continue to play with it. But the reboot thing won't go away.

  One thing is that when the system first rebooted itself, no installation or major update does, so I guess that nothing dangerous is done.

  Someone met with such a problem and how to fix it?

  Thank you

  I tried to restore all starts and start services gradually from the clean boot state.

  What is interesting, is that, after all what can once again, the system is absolutely fine.

  I guess the question was because of the activation process, or a problem a start-up program or service such as a fast storage intel, content etc.

  Thanks for the help, I think I should be fine.

• Windows Server 2012 R2 Request Time Out

  I installed Oracle Linux 7 use of Hyper-V on Windows Server 2012 R2. When I connect the Oracle Linux for internet (parameters--> network--> then set the device to run the internet), Oracle Linux takes the entire internet server and also indicates "Request Time Out" while that ping using command line on Windows server.

  Is it possible that I can fix this or can anyone help me solve this problem? Very Important and Urgent. Please help me.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• SEVERAL USERS AT THE SAME TIME WINDOWS SERVER

  Can I set up account 4 user to access my server via the remote control at the same time and let them use an independent software and independent Office?

  Example:

  User 1 - install software x

  User 2 - install software y

  user 1 and user 2 connect and begin using the software x and y at the same time.

  Is this possible?

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  I have a setting wrong?
  I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager...
  Any help would be much appreciated.

  Hi Richard,

  Thanks for posting your question on Microsoft Community!

  I suggest you to ask your question in the section service Terminal Server TechNet forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• FTP connection times out on Windows Server 2003 when you run Windows Firewall

  This seems to come up recently, perhaps with a recent Windows automatic update.

  I have FTP server running on Windows Server 2003 R2.

  The NIC has the firewall Windows is activated, which allows port 21 (FTP) through.

  When you use an FTP client from a workstation, the FTP client expires when you navigate to a folder with many files, say the folder/images of a website with 10 + MB in total (which isn't really that much). Navigate to other folders with smaller files seems fine.

  Now, when I turn off the firewall of the server, then I can use a FTP client on a workstation to access any FTP folder regardless of the number of files or the size of files and everything is fast fast.

  This brings me to the conclusion that the problem lies in the Windows Server 2003 firewall, and we must have this option disabled for FTP clients do not expire.

  Hi Scott a. Keen,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919

• Difficulty for the file attribute "Update time" a file hive of the registry update on XP and Windows Server 2003

  "Time modified" attribute of a file file the registry hive is updated when you load and then unload the registry hive files without making any changes to the files on a computer that is running Windows Server 2008 or Windows Vista, or Windows 7

  I see a hotfix is provided for Windows Server 2008 or Windows Vista: http://support.microsoft.com/kb/973148/ and for Windows Server 2008 R2 or Windows 7: http://support.microsoft.com/kb/983544

  Question: I want to know if this problem is also present in Windows XP and Windows Server 2003, and if so, we have a solution already for XP and Windows 2003?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

• Any server time I select to synchronize the time with, it is said: ' year error occurred while Windows timed with, (insert.server.here).

  Choose any server to synchronize the time with, it says, "an error occurred while Windows timed (insert.server.here) with," can someone please tell me why this is, or particularly how to solve this problem?  I am trying to connect to NetFlix with Windows Media Center, and as you can probably guess, I'll have no chance.  He told me, INVALID TIME SETTINGS.  Your computer's clock is set for an hour and invalid date or is not correctly adjusted for daylight saving time.  Update the settings of the clock, then try again.  Even when I set the time manually it will not work.  I just don't understand.  Help, please!

  Hello

  How to fix synchronization of time Internet - add your own time server
  http://www.edbott.com/weblog/?p=1779

  Dealing with Windows Vista time sync problems
  http://www.howtogeek.com/HOWTO/Windows-Vista/dealing-with-Windows-Vista-time-sync-problems/

  Synchronize your clock with time servers Internet from the Vista command prompt
  http://www.howtogeek.com/HOWTO/Windows-Vista/sync-your-clock-with-Internet-time-servers-from-the-Vista-command-prompt/

  Time synchronization on Windows XP and Vista with Internet
  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• restart windows multi server time

  restart windows multi server time

  Discussions were merged.

  Deleted duplicates.

  Multi Windows server reboot time in a powershell script?

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected.

  issue license remote dekstop

  I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected. Is this a problem with the license? Is it how do I get license for 10 users remote desktop? Thank you

  You will get the best answers by posting in the dedicated remote desktop on TechNet Forum:

  Remote Desktop Forum services (Terminal Services)

• Put into service Windows Server 2012 R2 takes a long time

  I created a simple bluerpint with Windows Server R2 2012 machine and the deployment of the Clone related vCAC. The whole process of commissioning is to take a very long time (> 1 hour). It seems that most of the time is passed to the workflow to work CustomizeOS stage. What could be the problem? I have not found the newspaper to find out where she is spending time. Can you help me solve this problem?

  I could solve this problem. There is a new Agent for Windows Server 2012 R2 guest. See VCAC 6.0.1 agent 2012 comments stuck Windows

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• Image acquisition turns off in Windows Server 2012

  I am running Windows Server 2012.  Kind of a necessity, that I also hosts the website of our company.  All updates are installed, and desktop experience is enabled.  Image acquisition Windows is listed in Services, but was originally set to manual by default.  I tried just to start the service, but it stops automatically after about 30 seconds.  I tried the automatic configuration, but it does not start on its own.  I get no error message, and I checked dependencies, which seem fine departure, because repeatedly referenced in many other assignments.  Fresh ideas?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Server time and time local (Dreamweaver) off the coast of 1 hour

  How can I get Dreamweaver to show me the correct timestamp on my files on the server and my local computer? When I telnet on my server, the time stamp on the files is correct. My server time is correctly set to He (GMT-5). My local computer time is set correctly. I asked my sysadmin if PureFTP has all zone settings and sysadmin told me that all my server time and time zones are specific. My sysadmin says that Drwamweaver is the culprit.

  I lived with this for a long time, but it is extremely annoying and I would like to address.

  I searched high and low in the option settings in Dreamweaver for a sort of zone setting or offset - found nothing.

  Someone knows a problem of out-of-sync of 1 hour between real time stamp file on the server and what Dreamweaver it shows in the display of remote/Local files?

  Thank you.

  During the hour.

  http://forums.Adobe.com/message/3545349#3545349

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB