W530 Predator HyperX memory

Similar Questions

• You want to add a cooling fan Hyperx memory.

  I have a HP computer p6677c.  Here are the specifications of the motherboard:

  Manufacturer: Foxconn

  Card mother name: H-RS880-ALVORIX_HF-Μatx

  HP/Compaq motherboard name: Alvorix-GL8E

  FN-Alvorix-RS880-formfat (Alvorix)

  Model Foxconn 2AB1 (1.00)

  Belarc Advisor: Motherboard - AMD 785 G(RS880/SB710), Alvorix Board: FOXCONN 2AB1 1.00 Bus Clock: 200 megahertz BIOS: American Megatrends Inc. 6.04 07/09/2010

  A CPU fan connector

  The fan connector system

  Four SATA connectors

  A front audio connector

  A header LED Mini-PCIE

  Two Dual-USB 2.0 headers

  Four Single-USB 2.0 headers

  A front panel header

  A S/PDIF header

  A power connector

  ATX connector

  I've updated the 16 GB memory, and I bought a Kingston HyperX memory module cooling fan.  I will not distort signals rpm of the motherboard of the system or CPU fan used to monitor heat, fan speed, etc..

  How can I get the right power source on my computer for this new fan?

  country0129,

  Interesting question. Here is the manual for it:http://www.kingston.com/datasheets/KHX_FAN.pdf

  The manual States it is plugged into the motherboard fan power. You would need an infusion system or plug power from this source 'Y' and he would gets its signal from this source rpm.

  The PSU 12V, constant full speed: http://www.svc.com/du3to4ad.html

  Y sensor rpm: http://www.svc.com/3pinyadapter.html

• Satellite L735-S3220RD - 1600 Hyperx memory compatibility

  IM thinking improve my memory of laptops at 1600, I want to make sure if its compatibile with kingstone hyperx 1600 mhz models. Part number: KHX1600C9S3P1K2 / 8G

  My laptop is Satellite L735-S3220RD with 6 GB memory DDR3 1333... Corei5 processor chipset n are the two SANDY BRIDGE.

  I would really appreciate if someone can give me a feedback and check if it will be compatible with this model to run at the speed of 1600?

  Thanks in advance.

  Hello

  Check please the list of modules of memory compatibility on the Kingston site directly.

• 15ISK m2 HyperX Predator issue Y700

  Hello, I just buy the 15ISK y700 with 16 GB of Ram and the HHD with 1 TB SSD 8 and I want to improve I buy at tim's even the predator HyperX 240 GB

  http://www.Newegg.com/product/product.aspx?item=N82E16820104542&cm_re=hyperx_m.2-_-20-104-542-_-Prod...

  but he acknowledges not, disk management has been reconognize, but it appears no not in windows

  read only drive his will recognize that it is the samsung but I'm not sure which one to buy

  http://www.Newegg.com/product/product.aspx?item=9SIA12K3UA7510

  http://www.Newegg.com/product/product.aspx?item=9SIA12K3G96790

  http://www.Newegg.com/product/product.aspx?item=9SIA24G3WK9980

  and if I buy one of these pilots his will work properly?

  I'll start from the SSD m2?

  Please help me

  Adrian

  bazadrian wrote:

  that and he has it on BIOS but not in windows

  You can delete the partition, and then re-create the partition? Once you did this restart and it should work.

• Extension of RAM for Satellite A100-756

  Hi all

  I want to expand my ram to 2 GB memory... Can anyone help to decide what memory to buy? 2 x 1 GB or 2 GB one?

  Anyone know if this memory is compatible with my chipset?

  Kingston HyperX 675 Mhz 1 GB DDR 2 memory no ECC computer

  Thank you very much.
  I'd appreciate any help and advice.

  Hello

  It s better take 2 x 1 GB, it has something to do with compatibility. So, is this HyperX memory for laptops? I have Kingston HyperX in my office and I didn t know that this series was manufactured for mobile systems, too.

  Can you please post a link where these modules are memory available?

  THX

  Welcome them

• XC-605-upgrading RAM

  Hello

  I have an Aspire X XC 605 (4460 3,20 GHz i5), which has 4 GB DDR3 RAM memory and 500 GB hard drive.

  one) can I upgrade my RAM memory? How can I have? What memory RAM should I buy (4, 8 - I don't know how many RAM slots, this machine has)

  (B) can I put the hard drive as well? If so, how much can I get?

  Thanks for the help!

  Paulo

  Hello, your system is a good system that offers a few updates

  For your 605, it seems that having 16 GB of Ram. So 2 Slots of 8 GB

  Your hard drive is a Serial ATA/300

  If it was my system and I wanted to update the material I would add the following me

  HyperX memory Black FURY - 16 GB Kit * (2x8GB) - DDR3 1866 MHz CL10 DIMM by Kingston to 90.00USD

  However, you can choose KITS of white, red, blue and black...

  I would upgrade a 960 GB SSD

  Bundle Kit, HyperX Savage, SATA3 (6Gbps), SSD 2.5 inch 7 mm for the SSD upgrade price range is between 530-700 USD depending on where you buy.

  However you could stay easy with a SATA 1 TB drive that go good prices as well. IF you could find a 2 TB at a good price that would be too great.

  The SSD is faster then most of the SATA drives and see there is no startup takes less energy to run and I think that for a system with a large power draw the SSD is a great upgrade.

  James

  EDIT: Looking on the site Web of Kingston the two purchase options for your computer, the upgrade of their share price would be 626.70 for an economy of 215,30 USD

• Build a white box or buy a used server

  Hello

  I'm debating whether to build a new box for a test lab/home server or buy a used Dell server. I intend to have about 5 VM running, Win2012 server, MacOS and Win Media Server.

  How the following two options happen, flow and performance wise?

  WhiteBox

  • ASRock 990FX Extreme3 AM3 + 990FX SATA 6 Gb/s USB 3.0 ATX AMD card mother AMD with UEFI BIOS
  • Kingston HyperX 16 GB (2 x 8 GB) 240 - Pin DDR3 SDRAM DDR3 1600 Fund blue XMP HyperX memory
  • Kingston DataTraveler Micro 8 GB USB 2.0 Flash Drive model DTMCK / 8GB (install ESXi 5.1)
  • AMD Phenom II X 4 965 Black Edition Deneb 3.4 GHz Socket AM3 125W Quad-Core processor
  • Sony Optiarc 24 X DVD Burner, large package black SATA model AD - 7280S - 0b - OEM
  • Cards NETWORK Intel PRO Gigabit 0G174P double Port PCI-Express
  • RAID and SATA drives will be added later
  • ~ $600

  Dell Server

  • Dell PowerEdge T110 Server
  • Intel Xeon Quad Core 2.4gig processor X 3430
  • 10 GB of Ram
  • Three hard drives of 500 GB SATA
  • ~ $500

  
  Thank you.

  Spec wise the white box is more beautiful.

  also carry a home server is not fun. fort.

  but

  for a quick installation without frills/great support with the pilots and the experience of others, the dell is better.

• Studio XPS 8100 - (Best Buy Version) bought end of 2010 4 GB DDR3 Ram problems 1333Ghz

  Greetings,

  I bought a Studio XPS 8100 in late 2010 at a Best Buy store. It came with 4 cylinders of 2GB 1066Ghz (each cylinder), adding up to a total of 8GB spread on 4Slots, all of a sudden one of the slot (Slot 2 to be precise) Ram began to fail, so computer would beep to reveal no ram or sometimes ram write failure etc. So, to avoid problems with this slot (Slot 2), I got rid of all four locations of 2 GB and wanted to replace them with the following ram: "(Kingston HyperX FURY 4 GB 1333 MHz DDR3 CL9 DIMM quantité = 2 d'ajouter jusqu'à 8Go en Kit) ', but my computer is beeping not revealing no ram detected." Now, according to the Studio XPS manual, the configuration can be either Ghz 1066 or 1333 Ghz as long ram DDR3 of Ram.

  I would like to know why my new 8 GB kit (2x4gb 1333 Ghz) does not work with my computer Studio XPS 8100? RAM is correctly inserted on the slot 1 and 3 (I even tried different slot combinations).

  It would be a great help if you guys can let me know what DDR3 1333 Ghz Ram is compatible with my Studio XPS 8100.

  Thank you!

  I contact Kingston technical support and get their help.

  I think the chipset on the studio XPS 8100 is H57.

  H57 is not listed as a compatible chipset on the webpage the HyperX fury.

  http://www.Kingston.com/us/HyperX/memory/fury

  Could it be the timing or Sub timings and memory density or...

  Kingston has maybe a different kit that will work and they can exchange.

  or return it and check the crucial.

  http://www.crucial.com/USA/en/compatible-upgrade-for//Studio-XPS-8100

• PLEEEEZE... Help with specing on a new PC, NTSC system CS5.5 (links included)

  Help with specing on a new PC NTSC with CS5.5 Master Suite. Windows 7, 64 bit. Will be used mainly for PP & still, some AFX & PS. editing a lot of avchd! Calendar usually between 1 1/2 to 2 hours in length, 2 or 3 LAYERS.

  I've seen the benchmark page but found very confusing. I also read the forum reading many posts similar but found submerged :-)

  KEY CONCERNS: Not sure, the choice of the video card or whether to go 6 core. I don't want to spend much more, unless I need to.  Ideally I would like to put all THE project files on the DRIVE 2 Raid 0 without divide them upward on separate drives. I'll be able with such a system?

  PROCESSOR: Intel Core i7-960 3.2 GHz LGA 1366 converted (boxed) SKU:275222 $199.99 boxed processor (I could go octacore, don't know yet)

  http://www.microcenter.com/single_product_results.phtml?product_id=0330706

  Or should I go 6 octo core? : $594^.99

  http://www.Newegg.com/product/product.aspx?item=N82E16819115066

  VIDEO card: Zotac ZT-40201-10 P GTX 470 1280 MB GDDR5 PCIe 2.0 x SKU: 838375 ((IS THIS THE BEST CHOICE?)) $200.00
  

  http://www.microcenter.com/single_product_results.phtml?product_id=0342176

  24 GIG RAM: Kingston HyperX memory 4GB 240-pin DDR3 SDRAM DDR3 1600 desktop

  http://www.Newegg.com/product/product.aspx?item=N82E16820104244 $186,00

  SYSTEM DRIVE: Western Digital VelociRaptor WD3000HLFS 300 GB 10 000 rpm 16 MB http://www.newegg.com/Product/Product.aspx?Item=N82E16822136322 $149.99

  VIDEO PLAYERS: 2 DISCS VIDEO software RAID 0: Seagate sata 6.0 3TO http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215 x 2

  Dump of disk: Seagate sata 6.0 3TO 1 http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215.00

  Motherboard: ASUS Sabertooth X 58 Intel LGA 1366 X 58 SATA 6 GB/s USB 3.0 ATX Intel MB http://www.newegg.com/Product/Product.aspx?item=N82E16813131665

  BLURAY BURNER: Pioneer black Blu - ray burner SATA BDR-206DBKS http://www.newegg.com/Product/Product.aspx?Item=N82E16827129066 & Tpk = BDR-206DBKS $109

  : COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP black steel ATX full Tower Compucase case with USB 3.0 and inner black http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160 & cm_re = 2-_-11-119-160-_-Product COOLER_MASTER_HAF_93

  $154,48

  Power SUPPLY: Thermaltake Black Widow W0319RU 850W ATX http://www.newegg.com/Product/Product.aspx?Item=N82E16817153106

  $129.99

  1 Yes

  2. 4 GB. DDR3-1600 + in a bag to hex or 2 packs of sorting of the brand and the desired model.

  3. why not get the new GTX 570 or 580? They are more silent and cooler.

• W530 upgrade memory

  What is the best memory for a W530?

  I'm going with Crucial, its what I have in my T410 and no problem.

• Upgrade memory HyperX on E520 - need advice

  I have 4 GB of RAM and you want to spend to 8 GB.  I am considering getting HyperX RAM.  I'm not a gamer, but I use the computer heavily every day, with many programs/windows open.  I also want to have the best performance while doing video editing.

  I don't really know anything about it, so I need to know:

  1 HyperX settles on the E520?

  2. If so, changes to the system to do?

  3. If Yes, where can I find this info?

  4. is there a difference in the performance of the system, even if I'm not a gamer?

  5. What are the advantages/disadvantages of the use of HyperX on the E520?

  6. problems/issues using HyperX on the E520?

  If experienced system users can tell me that the upgrade with ordinary memory be more sufficient for my needs, I'll be happy to do so.

  All the advice in making this decision will be greatly appreciated!  Thank you!

  Lenora

  (a heavy computer user knowing just enough dangerous tech)

  I hope that this is the list of "stay away" from lead_org

  I got lucky with Crucial.

  There are a good number of reports of problems with Corsair.  I don't think it's a bad product, in general, but there seems to be problems with Corsair and Lenovo.

  Z.

• Upgrade memory of satellite C50-A-157

  I am looking for the upgrade of memory and I need some advice. Please let me know if any of below works on my laptop?

  https://www.Amazon.co.UK/Corsair-CMS...ct_top?ie=UTF8

  https://www.Amazon.co.UK/HyperX-IMPA.../DP/B00KQCOV5C

  My laptop: Satellite C50-A-157

  Aloha,
  the revenge of CMSX16GX3M2A1600C10 Corsair 16 GB (2x8GB) DDR3 1600 Mhz CL10 passionate Notebook Memory Kit is probably compatible with your laptop if you have 2 slots for memory. Http://www.toshiba.co.uk/discontinue...ite-c50-a-157/ says here onley supports up to 16 GB. Kingston memory is a low voltage RAM is not compatible with your laptop. DDR3L - what means that which is low voltage

• Hewlett - Packard HP Compaq 6000 Pro MT PC memory problems

  I have a few Hewlett-Packard Compaq 6000 Pro MT of the HP PC I want to make a memory upgarde. At the moment the memory installed on each of them is 2 GB Micron 8JTF25664AZ-1G4D1 - 2 GB DDR3 - 1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz). I bought 2 different brands with the same specification that Corsair XMS3 4 GB 1x4Go memory SDRAM Desktop DDR3 1333 Mhz DIMM 240-pin CL9 and Kingston HyperX Blu 4 GB of RAM DDR3 1333 MHz DIMM 240 pin CL9 memory generic. When mounting this new memory I get the error message sound for faulty memory. Memory have been tested on the brand of the other computer and it works fine.

  Can someone tell me what I will do in this case? I updated the BIOS as well, but still no change.

  Kind regards

  Patrick

  I not really much information but what I have found, here's a thread @Tom in the same direction as your ad material .  It shows the same symptoms as published at the end.  This person has used BLS2KIT4G3D1609DS1S00, which is the FOLLOWING.  Found on AMAZONandEWEGGN.  Also to MICROCENTER.

  Motherboards are picky when using RAM, so use what is known to work.

• Re: Can Satellite A100-499 - I use Kingston HyperX DDR2-667 RAM?

  Hello.

  I have a Toshiba Satellite A100-499 with chipset Intel 945 PM and with 1 GB of RAM at 533 Mhz (this is the memory that came by default when it was purchased). I want to upgrade the memory to 4 GB 667 MHz and I saw two Kingston hyperx 2 GB DDR2 - 667 PC2 - 5300 CL4 (KHX5300S2LLK2 / 4G).

  I ' w concerned about the compatibility of this memory with my laptop. Memory that is shown in my laptop (KT667D2 / 2G) in the site web of Toshiba is also kingston and technical specifications are similar, but time lag case which I've not been able to verify. I'm looking for the forum and it seems that Toshiba laptops are very delicate with the memory.

  Did someone knows or has had experience with this combination? I don't want to spend the money to have to sell it later.

  Hello

  Theoretically, you can also use the Kingston HyperX modules. They are very similar to the normal Kingston modules, but they are a little faster. Certain times are may be lower, but this should t be a problem because it will be set automatically from the BIOS.

  A good friend of me always is the HyperX modules for its notebooks and there has never been a problem.
  In the worst cases the modules don't work, that you can bring it back to the computer store and ask Kingston normal modules.

• AMD APU Kaveri (like E555) - what speed of memory?

  Anyone know the max memory possible for Thinkpad E555 speed in a more recent double module and with BIOS configuration?

  AMD lists in some documents of different possible speeds for single SO-DIMM and SO-DIMM and dual level as single or double rank. He claims that there could be a fall to 1333 MHz even. But what is the reality for the Lenovo Thinkpads? I found no official document on this.

  There are brands (such as Kingston HyperX Impact) which have DDR3 SO-DIMM available for 1600 MHz, 1866 MHz and 2133 MHz, so that this is not offered specifficaly as being compatible with the E555.

  Everyone with more memory RAM speeds than 1600 MHz DDR3 on the E555 or a similar Thinkpad?

  Since there was not any feedback I chose a kit of 1600 MHz (Kingston HyperX). He works at the set rate - slightly overclocked - Lenovo 2x810MHz and isn't clockin until 1333 MHz as suggested documentation AMD BKDG.
  If someone could share experiences of 1866 MHz or faster RAM kits, I would be happy to know...