W7 will not schedule a task

Similar Questions

• The program window will not bar restore tasks

  I work for a school district where we all connections.  On one of my teachers computers, when it opens a certain program it automatically minimizes and will not restore a mode full-screen.  It does via a shortcut as well.  However, when I log in, it works fine.  Any ideas how to fix?

  Hi afmtsu,

  ·         Are what program you referring?

  ·         These computers are on a network?

  ·         If it works well before?

  Check to see if the following is useful.

  Method 1: You can uninstall and reinstall the program to check the issue.

  How to change or remove a program in Windows XP

  Method 2: Perform a system restore to the date when it was working fine.

  How to restore Windows XP to a previous state

• Media Player will not bar restore tasks

  My media player don't restore or optimize off the coast of the taskbar. He plays music or videos in a small box out of the taskbar, but will not restore on the screen of the monitor. I tried to run the exe to install in the folder program files & I get an error message that I can't run because it is an older version of wmp that one installed. Of course I would be grateful for any help or suggestion if anyone has any ideas. I have Windows Vista Premium 64 Hpme x. thank you.

  If it is too long, see if it works...
  Do a system restore.
  Choose a date where you did NOT have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

• Defragmenter will not work in Task Scheduler

  Defragmenter resets to 'never' after trying to set a schedule.  I put the calendar. Click all OK, but as soon as I close the Defragmenter, he returns to "never"and does not perform a defrag on schedule. "

  Have you tried typing Task Scheduler in the box start the SEARCH Menu and then right click on Task Scheduler in the list, by selecting the option "Run As Administrator" (you must know the administrator password)?  See if you can then make the changes.

  Defragmentation is running manually for you?

  Use the run as Administrator option to start a command prompt for these two examples of available additional details via a manual defragmentation.

  Disk Defragmenter
  http://www.windowsvistauserguide.com/disk_defragmenter.htm

  How to perform a manual defragmentation complete of your hard disk under Windows Vista
  http://www.howtohaven.com/system/vistadefragmentation.shtml

• My VB2013 exe will not run the Task Scheduler but works very well for direct click in Explorer as well as a BAT file.

  The program is configured to run from a direct click using a text file specifying where the source files and destination.  Worked very well for a direct click or from the. BAT file.   It runs the Task Scheduler, I can see it appear in the Excel Task Manager when it is active.  But while it freezes.  He reads the spreadsheet looking for specific elements then output to a CSV text file.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Server 2008R2 Task Manager will not run the task

  Hi all

  I have problems with automating a task on the server 2008R2, I have a limited user on my server which account is used to run a media server (Twonkymedia) and a home automation program called "Domoticz".

  Because I don't want the user to have access to the normal system resources, it always takes administrator privileges to run the program and access to the database, because I don't want to manually enter credentials of Directors whenever this user logs that I taught on the automation of this with Task Scheduler.

  I managed to create a task that toured to launch applications with admin credentialsb (simply by using the command runas in the path did not work) but once I connect and the still as the "limited" user task that has a shortcut placed in the startup folder does not start specific applications When I open the Task Manager to diagnose errors, she appears as running.

  Both users are given exclusive rights to start as a processing batch.

  22/08/2016 information information on the process created task 129 21:59:40
  Information 22/08/2016 21:59:40 200 Action started in f33c3a46-e705-408c-a675-08aabbecf4bb (1)
  22/08/2016 information 21:59:40 100 f33c3a46-e705-408c-a675-08aabbecf4bb launched task (1)
  22/08/2016 information 21:59:40 319 message task engine received to start the task (1)
  22/08/2016 information 21:59:40 110 task triggered by the user of information f33c3a46-e705-408c-a675-08aabbecf4bb

  The config is as follows;

  In general: it is set to run if the user is logged in or not, and it must run with the highest privileges.

  Its triggered when no user is logged on

  Actions are the following; Start a program

  Program 1: "C:\Program Files (x86)\Domoticz\domoticz.exe ' Arguments www - 1202 - 8000 sslwww

  Start in: "C:\Program Files (x 86) \Domoticz.

  Program 2: "C:\Program Files (x86)\Twonky\TwonkyServer\twonkytray.exe.

  Any idea what's going on here?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Vista is running extremely slow and will not open the Task Manager or connect to the internet

  I have an older Dell running Windows Vista, and it started fine when I got it, but about a month ago it started very slow and refusing to open any program. I can't get the Task Manager to open to all and internet Explorer refuses to connect. I did a complete analysis of the system through Viper and it came out saying: there is nothing more than a few trogans. He also started a taskbar at the top of the screen. No idea how it happened either.

  Hello
  Your computer is probably infected by malicious software. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Can not find the task in the Task Scheduler

  I created a fundamental task to connect to an ad - hoc network whenever I boot my laptop with Vista Home Premium 32-bit.  I don't want that to happen and I deleted the network tries to delete the task.  When I open the Task Scheduler, I don't see my task listed.  I made sure 'show hidden tasks '.  I know that the task runs as I continue to receive errors not being to find the ad hoc network.

  I created a new task of fundamental task, called 'test' starts just the calc program and it shows in the list of tasks.

  Any help?

  As others have found, if you change the name of your computer, scheduled tasks that have been associated with a specific user account (like the logon trigger, such as the credentials for the job and so forth) will no longer appear in the list of scheduled tasks. Scheduled tasks displays the message "an error has occurred for task xxxx. Error message: the specified account name is not valid. "The same thing happens if you delete a user account that is named in a scheduled task.
   
  The reason for the problem is that the computer name part of the account name (for example, "mycomputer\myaccount"), and so if a part of the name is not valid, the associated account is no longer recognized. Unfortunately, given that the scheduled tasks will not display the task entry broken, you cannot fix it directly.
   
  The tasks themselves are defined in XML files in plain text stored in \windows\system32\tasks. The files have the same name as their entries in scheduled tasks.
   
  If a task is not desired, you can simply delete the corresponding file from \windows\system32\tasks.
   
  If you want to restore a task, you must change the computer name and/or account name everywhere wherever he is in the job file. But, you can just edit the file in place to solve the problem. Scheduled task detects that the file has been modified externally and even once will not use or display.
   
  I managed to solve the problem by following these steps:

  1. Move the file to the task entry broken of the \windows\system32\tasks in another case. You want to move it, copy it not - file must be put out \windows\system32\tasks. You can do this by using Windows Explorer or move the command in a command prompt window.
  2. Using Notepad, open the file in its new location. Set the name of the computer or the name of the account as it happens and save the file. Repeat steps 1 and 2 for all other tasks of problem.
  3. Open scheduled tasks, or select the menu Action, refresh. It should be no error message now, given that the task of the problem has been removed.
  4. On the Action menu, use the import command to locate the edited file. This will restore the scheduled task.
  5. Test the restored task by opening and then run. Once everything works, you can remove older versions of the file task as you had moved it. Repeat steps 4 and 5 for any other task edited file.

• Scheduler of tasks is not planning the next task

  I have a task configured to run automatically at 5:15 a day, he runs a small program that checks a FTP site for new files.  I have this running on other computers, there is only one who behaves in a strange way, I need to solve.

  He works for a day, maybe 2 and then he is not planning the next run time, so he spent several days without checking and only works if I run it manually and plan its new.  Turned on, value run as if scheduled asap is missed, running under the administrator account, with the highest privileges, the operation completes successfully, but it runs the next day morning, then maybe two mornings and stop the calendar itself.  This particular task last ran on 8/28.  Other computers are configured in this exact way but it's the only one who made it.  It's a fairly new computer, OptiPlex 3020 in production since 5/2014, but this behavior has been fairly constant since the beginning.

  * Add * the only other weird thing that happens is that I start Task Scheduler, I see an error that says:

  The scheduled task "(0)" no longer exists.  To see the common tasks, click Refresh.

  This happens every time, there are only 2 tasks and click Refresh all to appear the error once again both are still there.

  For any help or suggestion would be appreciated.  Thanks in advance.

  Hello Mahone,

  Welcome to the Microsoft Community Forum.

  I understand that Scheduler tasks do not schedule the next task. I'll be happy to help you with your query. Let me ask you:

  1. Your computer is connected to a domain network?
  2. What security software do you use?

  Please see the article below and check if the problem still persists.

  Troubleshooting Task Scheduler

  If the problem persists, perform the clean boot and check.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform the clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Now try the above steps and let us know the result, we will be happy to help you further.

  Thank you.

• Firefox will not hold, but shows in the Task Manager, after updating graphics drivers from AMD 13.1.

  Hello

  After update for drivers AMD 13.1 on my 5770, Firefox will not launch; It doesn't, however, appears in the Task Manager. I want to emphasize that it will boot into Windows safe mode; When I opened it in safe mode, I used this time to deactivate all plugins, modules, extensions and created a new profile. This did not help. I also tried launching Firefox in its safe mode and had no luck with that either.

  I encountered this problem once before, when trying to upgrade to an earlier version. I think I was moving from 12.1 to 12.4, but I'm not 100% sure of that. In the end, my solution was then to retrograde back to my previous driver. The steps mentioned in the previous paragraph has not helped at that time, not do a complete reinstall.

  experience of 15 years, and that computer repair baffled me.

  Thanks to all those who might be able to help.

  Eventually the relevant specifications.
  Windows 7 Ultimate x 64
  AMD Phenom II x 4
  Ram 6BG
  Chart AMD 5770, running catalyst 13.1

  See here

  • https://support.Mozilla.org/en-us/KB/Firefox-wont-start-find-solutions

• In XP, error 0 X 80090016 Keyset does not exist, the task scheduler does not perform the tasks

  In Windows XP (SP3) get this message and the task scheduler does not perform the tasks

  Excellent resolution.  My scheduled tasks are run.  It is the first answer that worked for me.  Thank you

• The task manager has started to appear without borders and will not go away, unless the computer is off.

  When using the Ctrl-alt-delete option and the Manager tasks appears it seems without borders.  The task manager remains after the programs are all closed and will not go away, unless the computer is off.

  It's called mode 'small footprint '.  Double-click anywhere on the border of the Task Manager window and you will get the Menu bar in the rear.

• When you try to schedule a task, error message 0 x 80090016 Keyset does not exist.

  Whenever I try to schedule a task, I get the error message 0 x 80090016 Keyset does not exist. I went to the response page, but I do not understand what protected storage is and I do not know how to find... I followed the instructions, but windows cannot find MSC.

  Hello

  You did changes to the computer before this problem?

  I think you could have typed incorrect order in the run window. Here are the steps that may help you.

  1 open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. find the protected storage service, and click to select.

  4. Select Properties.

  5. in the Startup Type list, select automatic.

  6. make sure the service of that status is started.

  7. click on OK.

• How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to method 3.

  3. for the network icon.

  (B) to activate the icon network - Enable_Network.reg< click="" to="">

  * Don't forget to restart to complete the procedure. ***

• Task Manager Windows 'show all processes from all users' will not work

  Hi im running service of 64 bit vista Home premium pack 2

  For some reason any button "show all processes from all users" in the Task Manager will not work, when I click nothing happens, uac prompt little or nothing.

  I can end processes very do well no problem it's just the show all button that does not work, I thought that maybe the taskmgr.exe in my right-click system32 folder and compatiability tab and running it as admin it would work, but the compatiability tab is completely grayed out all I can't click anything in it.

  Im not a big computer wiz, but I checked my user accounts account im logged on says that it is the administrator and UAC is on.

  On a side note do not know if this has nothing to do with my problem but recently my computer has got contracted a Trojan horse that has infected the mrt.exe file, I had to delete, now I get an error during windows startup associated with mrt.exe works not properly. any suggestions how to solve this problem too

  Hello

  Make sure that the malware is removed completely

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html