Similar Questions

• Impossible to access the internet using WAG 160N wireless adapter

  I have connected my WAG 160N to internet via ethernet cable to my PC Windows xp pci card, but when trying wireless connect to a spare PC, using Netgear WG311 adapter wirelesspci in the spare wheel, although I get a 100% signal, I can't connect to the internet.

  I would be grateful for the advice

  Thanks for the reply and suggestions. I've grown using the spare to WAG 160n and installed the adapter connect pc wireless in my spare pc and was pleasantly surprised to have a connection to the internet after uncheck wireless network connection before the windows firewall in the Security Center. It was not a solution before I couldn't even connect to the internet then. The only difference was that the spare wheel was recently formatted and free from any clutter. Now that I know that I can connect. Fingures crossed, I will return and if that does not work then I know I have to start looking at the deletion of something of the origin of the problem

• 6120 fabric Interconnect - 8 pre-installed licenses?

  The specifications for the 6120 reports interconnection sheet 8 pre-installed licenses are included: (http://www.cisco.com/en/US/prod/collateral/ps10265/ps10276/spec_sheet_c17-665945.pdf)

  «There are eight ports previously authorized (out of 20) included with the Cisco UCS 6120XP.» Sixteen ports previously authorized (over 40) are included in the 6140XP UCS. All additional ports require a license.

  We are currently using twelve ports on each of our four 6120 interconnets. If the wages of the licenses are deleted it shows only six ports with no grace period and the rest have expired.

  Ports in use are not sequential (as shown below), and it seems to have 1,2,3,4,17 and 18 as licenses pre-installed with two apparently missing.

  I recorded a request for TAC, but suck after several emails back.

  Can someone advise please?

  1 period of grace (license-ok) 0

  2 period of grace (license-ok) 0

  period of grace (license-ok) 3 0

  period of grace (license-ok) 4 0

  11 (license expired)

  12 (license expired)

  13 (license expired)

  14 (license expired)

  15 (license expired)

  16 (license expired)

  period of grace (license-ok) 17 0

  period of grace (license-ok) 18 0

  Hello

  You can check on the following doc for more information on port licenses:

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01101.PDF

  David

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• My App Store did not work... When I try to update or install apps it does not work. Can you please fix this?

  Can you please fix the problem? Appstore cannot update or install apps... App Store not worked yesterday.

  We cannot solve a problem for you, but we can make suggestions of troubleshooting...

  Have you tried restarting your iPhone yet?

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• How to restore a security entrancecode that was not installed by updating to ios10?

  Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed.

  I use an entrycode before this and the same works after that.

  No longer is my ability to import on my Imac out of the photo on my iphone, it says in Iphoto: cannot import as device is held by entrancecode, you need to unlock the device to import the photo.

  My unlock does not work. I tried to connect to itunes, tried to reset, but so far nothing works.

  What can I do?

  Hello

  Go to settings touch id & password if you can't do this support.apple.com contact

  See you soon

  Brian

• Need to install Java command line tool

  

  I get this error after the installation of the new OS sierra. Java is up to date. How can I fix it?  Thank you.

  The most likely cause is the program that wants to use Java's only request the use of Apple legacy Java 6. That the developers didn't like enough to have use Java the right way, you need to install Apple legacy Java 6 or uninstall the program that wants to use Java - likely produced Adobe or a Facebook video chat program.

  Download Java for OS X 2015-001

  Maybe it's that the program requires a JDK be installed instead the JRE from Java.com. So, if you download the SDK Java Oracle of Oracle's Web site, then you might try that if you have a recent version of Java. However, I don't think I've seen someone declare that as successful as the program who need Java so poorly designed.

• iPhone 6 problem after installing IOS 10.0.2 - phone app keeps freezing for 30 seconds

  After installing IOS 10.0.2 on my iPhone 6, the phone app keeps freezing when I open it and remains frozen for about 30 seconds.  Then it closes its doors.  Then only can open and use the phone/directory.  Does anyone else have this problem?

  My husband and my phone do the same thing. We are constantly reset. Very frustrating!

• I can not install app purchased in ios 10

  I can't uninstall an app purchase (no current app) in ios 10

  You want to install an application or uninstall?  Your title and your post show different things.

• registered e-mails lost when I installed sierra

  I installed sierra this morning and that you do not have boxes of saved e-mails that were on my mac mailbox. I guess I'm not the only when I saw others when Googling this issue.

  This is the Mac Pro desktop forum, I asked that your post moved to the Sierra forum

  macOS Sierra

  What type of e-mail account? Exchange/IMAP or POP3?

  What version of Mac OS updated you go?

• Cannot install Sierra because updating Photos at a standstill

  Apparently, the new Sierra OS included an update of Photos.  Started Photos updated first, it worked for ~ 30hours 'building a library '.  Tried to complete installation of Sierra, which requires a reboot - of course all Apps must close to restart, pictures will not close because the library construction!  But now the small progress whirly ball is not swirling and there is no options in the Photos menu-all gray, Photos Version 1.0.1 (215.65.0).  I'm afraid force quit closing snack takes pictures of my 16000 images with it.  Have they the time machine upwards.

  Should I force Quits Photos and install the Sierra, then restart photos or is there something else to do?

  I'm confused by the title of your topic, then the body of your message.  Did you install Sierra?  Or are you trying to rebuild your current photo library with your current Photos app before moving on to the Sierra? Photo is part of the upgrade of the Sierra and cannot prevent the installation of Sierra.

  What is your library?  If it is very large that this moment may be offline.  It is small and because you have a TM backup go and force quit Photos.

  Where is your library?  If it's on an external hard drive that is how HD formatted and connected to your Mac?

  

• How to install windows 8 or 7 Sierra?

  Tried to install 7 or 8, since the installation of sierra what it messed my partitions where bootcamp windows 10, but now had to work I have to use an old Olympus Studio tool for project work/uni which works only on windows 7.

  It seems that apple has control over what you do on a machine and the system I have invested important sums of money in. Very close to sale until the installation of all mac and return to windows. El Capitan was buggy on my machine before and cling endlessly.

  installs Windows 7 is not fully supported in Sierra bootcamp

  http://www.Apple.com/support/Bootcamp/getstarted/

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  MS dropped support for Win 7.

• Sierra of downloaded OS but have not installed. What should I do now?

  I downloaded macOS Sierra, but it has not installed. I rebooted the MacBook Air without success. What should I do now to get installed it.

  Download and installation are separate steps. You should be able to find 'Install macOS Sierra' in your Applications folder. Double-click it to start the installation. It would really be a good idea to first make a backup complete and bootable.