WAG310G

I recently bought a router WAG310G. It worked perfectly for a whee while but now he is barely connected to the internet. There seems to be no problem with the DSL I'm. The old router still works very well, the only problem was its lack of ports and wireless.

When I plugged the WAG310G power light turns on, light illuminated lan, phone port 1 on, and the DSL light port began to blink for a while until that happened solid. After you configure the ISP password, etc. the Internet light began to blink and finally appeared solid.

Today when I turned the router on all the power, lan etc. turn on as usual. The DSL led blink for a long time, stop the flashing for half a second, flashes for a while once again and then becomes solid. The internet light flashes from time to time and occasionally flashes intermittently since the DSL is light when it is first activated.

The control panel works fine, and information transfer on the internet works well. Configuration page "DSL Status" presents the standard information for example. upload and download of the ability of speed and the details of the loss on the line of the connector box.

"State of the Internet" page of control panel shows that the internet is connected. The internet does not work well, and like I said the internet light flashes intermittently.

The phone works perfectly well plugged into port 1. I can call anyone and the quality is great all the time, but occasionallya shortly after hanging up the phone sounds, but nobody is there.

The old router works perfectly well but it not there no phone about connectivity. I use the old router to connect to the internet and write this message.

Since I put the router running he did sounds by clicking on every time something important happens. Events include the rotation on power, recognition of LIS when light begins to blink, the DSL connection when the light stops flashing and the setting up of the Internet.

Always the rattling noise occurs and the fact for the internet however 'Internet' lights up, as I said, rarely works.

All knowledge, ideas and thoughts are welcome.

Thanks in advance.

Daniel

Have you tried to reset your router and reconfigure all the settings on your router back again. Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

Once you re - configure all settings of your router I think it should work perfectly fine.

Tags: Linksys Products

Similar Questions

  • WAG310G - usb drive

    Hello

    Why some usb drives are not displayed under "storage" on admin the WAG310G browser-Soft when it is attached to the usb port on the WAG310G? Are there special requirements - or the discs must be specially formatted?

    And when I see a disc usb browser-app, is it possible to access also the player directly from a Windows XP machine (for example in windows Explorer) and not only through the WAG310G browser interface?

    Thank you

    Peter

    FAT/FAT32 file system is supported by WAG310G.

    This particular model not (WAG310G), you can't access the drive in windows Explorer. Need to connect to the router interface to access the drive.

  • Access to the hard drive USB network - WAG310G

    Hello.. I have a 500 GB USB hard drive attached to my WAG310G, but it can be accessed from the network. IM using XP Pro.

    Someone suggested to go to start / run and typing \\192.168.1.1\, but I just get an error "the network not found path.

    This seems to be a really hard to find an answer, because I can't find any help on the internet either.

    Help, please!

    See / Kevbb.

    I think that you do not have the possibility to access the drive on the network, but you can use the interface of the router to store your entire network on the USB connected to your router.

    If you have DDNS service, you can manage the storage device using the WAN IP address. To enable WAN HTTP access, you must enable remote access on the Administration > management screen and disable the firewall on the security > firewall screen.

  • WAG310G - to USB HDD size limit?

    Hi all... just bought a WAG310G. Wondering if there is a size limit on the USB hard drive that router can take? What is the GB, as appropriate?

    Any help appreciated

    Ta / Kevbb.

    The WAG310G is able to support a USB 2.0 external hard drive of up to 750 GB.

  • WAG310G drops wireless

    Hello

    My WAG310G quite often (about once per day) loses wireless connectivity. In other words, the 2 computers that I have connected via radio lose their connections. 3 computers, I've connected on net cables not have these problems. The only way to get a connection again is to restart the WAG310G. Computers can see that the wireless network is there, but it is not possible to connect.

    What is the basis of this problem with the WAG310G, and how can I solve this problem?

    Is it possible to only "reboot" on the side of the WAG310G wireless? At least this way I affect users connected via the wireless and does not affect the users connected via cables.

    Thank you

    Peter

    It is not possible to restart only the part of the router wireless.

    You can try to change the settings on the router wireless.

    Open the router configuration page. Click on the wireless tab and go to the settings advanced wireless. Change the interval of tag to 75, RTS threshold to 2307, 2306 fragmentation threshold. Save the settings.

    See if it works.

  • IPTV on Cisco WAG310G

    My ISP technician could not configure IPTV on Cisco WAG310.

    -Internet is OK but IPTV in bridge mode did not work.

    I contacted the Support technique Linksys at 2010-08-14 19:35 (Incident: #) don't-> any suggesstion

    The second time at 14/08/2010-21:50 (Incident: #) don't-> any suggesstion

    The third time at 2010-08-15 09:50 (Incident: #) is-> no solution

    The 4th at 2010-08-17 06:50 (Incident: #) is-> no solution

    The 5th at 2010-08-18 15:26 (Incident: #) is-> no solution

    6-20/08/2010 08:11 (Incident: #)--> (Cisco employee): wait...

    And now 01/09/2010: no answer!

    I bought the new modem of different brand.

    (Note to mod: removed non-public information)

    Step 3: map 2 to a LAN port connection

    VLAN ID must be 0 (default 2)

    Many thanks to Mr. Daniel Pham and Kevin Nash for accurate suggesstions

Maybe you are looking for

  • HP 15-af131dx: unable to boot from a flash drive

    My HP 15 - af131dx don't let me boot from a live bootable flash drive. I was able to boot from the drive on my hp mini 110 computer and in the past, I ran Ubuntu on a USB key and it worked fine. What should I do?

  • Some objects are pixelated black boxes during the game.

    My computer is about 4 years old.  Reference Dell with Windows XP, 3.2 GHz, 1 GB of ram.  He was the original of the graphics card: Radeon x 600 graphics card.  I just bought Modern Warfare 2 and also bought and updated the graphics card to Radeon HD

  • print the image mirror on HP6510 all-in-one

    I can't find the option on my printer dialog box to print a mirror image of an iron on transfer... Can anyone help?

  • I reset my router, now my two wireless printers will not print wireless.

    I reset my router and now none of my HP printers can print wireless.  They print with a USB key, but the installation program for the Wireless does not detect my wireless network.   I use an iMac and Airport extreme router. I have a different brand p

  • Custom in the alt - tab popup icon

    I was wondering if there is a chance to see a custom icon, even in the alt - tab popup (in mode "non-aero"). After that I changed the icon of the application pinned to the taskbar without problem, removed the IconCache.db file and rebooted the system