IPTV on Cisco WAG310G

Similar Questions

• Compatibility of VLAN with Cisco

  Hello

  We just bought 10 x new Netgear switches (all M4100) to add to an existing Cisco infrastructure.

  Simple configuration with only 6 Valns.

  5: Admin, 30: VOIP, 101: management, 100: a set of Workstations, 102: second series of Workstations, 200: IPTV, 400: Internet, 401: Wireless Management

  All I wanted to do was: 2 last ports each switch netgear = T and all the VLANS. I have not identified all ports if I want to use in the appropriate vlan

  101 of VLAN is my Managementt Vlan. (Need to configure inter vlan routing for this to work)

  I only turned on three switches up to now and all three do not work. They work for a while and that packets but do not receive all.

  What I am doing wrong?

  What I need to get rid of the original vlan1 on the netgear?

  Is that what I need config in the STP to make these compatible with Cisco (300 and 400 series) switches.

  I use an optical backbone on Cisco and Netgear switches.

  Sincere greetings,

  OLAF

  Hi Moussa,.

  Thanks for reaching out.

  We got it working.

  Step 1: upgrade to the latest firmware.

  Step 2: Forget the MISTLETOE.

  We had a few questions about the old firmware - causing links to trunk have some incompatibility with their tag and removed the images between Cisco and Netgear brand.

  After the upgrade of the firmware that we had access to "switchport mode access" and "switchport mode trunk" orders fixing the access port and trunking issues.

  Thank you Mr President,

  OLAF

• the replacement of the appliance for cisco digital media encode 2200

  Dear all,

  I have deployed the Cisco Digital media suite, including:

  1 x Cisco Digital Media Server include DMM Cast Module, Module signage digital DMM, DMM show and share.

  Now, my customer want to buy Cisco digital Media Encoder 2200 for event IPTV and live.

  I have check the Cisco product's end of sale.

  Please recommend the replacement of the product or the same third party features.

  Please answer me as soon as POSSIBLE because the pressing of this project.

  Best regards

  VO

  Now, my customer want to buy Cisco digital Media Encoder 2200 for IPTV and Live event.

  No it's not.

• Hi all. Could someone tell me how to turn off and turn on the CISCO 52 "LCD control using RS232 to play in the future

  Hello

  Im working in Cisco DMS & IPTV.

  IM facing a problem with 4400 DMP & 5.2.2 DMM.

  I want to control CISCO 52 inch LCD using the 4400 G DMP. I am able to power on LCD screens remotely through the DMM off. Also, I am able to schedule for turning off the voltage & power on the LCD for a short number of days as for 3 or 4 days.

  but I can't program it to play in the future for a month.

  My requirement is this: I want to turn off the LCD screen during the downtime in my office to customers. I want to plan the screen to running from 07:00 to 18:00 I want to turn on my LCD from 18:00 to 06:00. I want to this appendix for 1 or 2 months of long in one fell swoop.

  good answer as soon as possible.

  Hello Peter,.

  You will need to add 2 separate events in the appropriate groups of dmp.

  You need to power the LCD screen will be to be repeated on a daily basis with the desired stop time.

  The second will be for LCD power supply using the same methodology as the first.

  The catch here, what if your client's Office is open only 5 or 6 days a week, you need to define the events above for each work day, BUT each event must be repeated in every week (not every day).

• IPTV/Multicast via VPN

  Currently have a requirement for our users VPN / wireless, to have the opportunity to view CNN/other via IPTV channels. We are using VPN concentrator 3030 of Cisco for our needs. This box is able to support multicast? What needs to be fact/set up to allow this works? Any help would be most appreciated. Thanks in advance.

  -Matt

  The 3000 series concentrators VPN currently does not support multicast. Concentrators 5000 series more do as well as the PIX and VPN router. There was some talk to the 3000 series support multicast traffic in a next version, but don't hold your breath. Code of the v5 is perhaps what I mean.

  I hope this helps.

• integrated macOS Sierra Cisco IPsec VPN does not work anymore (impossible to validate the server certificate)

  Hello

  I just upgraded to macOS Sierra and built-in Cisco IPsec VPN no longer works. When you try to connect, I get a "cannot validate the certificate of the server. "Check your settings and try to reconnect" error message. I use Cisco ASA with self-signed certificates and everything worked fine with previous versions of OS X.

  Please help me, I need my VPN Thx a lot

  I am having the same problem with StrongSwan and help cert signed with the channel to complete certificates included in the pkcs12 file imported to the keychain. It was working properly in El Capitan, but now broken in the Sierra.

• Cisco VPN does not work in the Sierra

  I just upgraded to OS Sierra and the Cisco VPN, I had the installer does connect more.  The Setup looks right into network preferences. When I click it looks like it is trying but stops without asking for a password.

  Cisco VPN client may need to update or re-installed. If she uses the PPTP Protocol, it will not work. Support for PPTP was ignored, because it is no longer considered as secure.

• Cisco Jabber

  Good afternoon; I have the Cisco Jabber Software running on an Iphone 6 Plus, everything works well when the phone is unlock, when the phone is locked can not answer the calls received by the Cisco Jabber only a window appears with a message that I have a call, but I can't answer. Is there a way to solve this problem. ????

  Greetings.

  Fernando

  Since this request is not an Apple application, I suggest make you contact with the developer of application or their support and ask your question.

• If I can do an Airport Extreme mobile network with a modem/router cable xfinity manufactured by Cisco?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?  The modem-router Cisco/Xfinity put into bridge mode?

  Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?

  Yes, if the Airport Extreme will be connected to the Cisco DPC3939 back using wired Ethernet wired, permanent.

  The modem-router Cisco/Xfinity put into bridge mode?

  No. I you have done this, the Cisco/Xfinity device would only act as a simple modem... so it would not be a wireless service to all.

  A note of caution here... the support document you are referencing... Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)... use the examples that are long outdated does not follow with the versions present on a Mac AirPort Utility or iPhone/iPad.

  There are some good general information in the document.

• Is it possible to download a previous version of firefox that latest update blocks the characteristics I absolutely have to have for my cisco courses?

  I can't get my password box or my java tool correctly load or work on the update for firefox java tool is something that I have to complete my work in my cisco course. So I would like to know if there is a way to download and install an older version of firefox, so I have something I can do my job without having to use a browser that I don't have confidence.

  If you decide to try the version Extended Support Release (ESR) of Firefox, here is how I suggest to install:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.2.0esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx40
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx40
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Install and run?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx40\Plugins
  • \Fx40\browser\plugins

• FireFox 39 Incompatible with all Cisco devices

  With the last update access to all devices Cisco via FireFox is no longer supported. Now, I get the following errors:

  The secure connection failed
  An error occurred during a connection to [IP]. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)
  The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
  Contact the Web site owners to inform them of this problem.

  Is there a way to roll back the version to avoid this or a permanent fix? FireFox is currently the only browser that works very well with Cisco devices, and now it won't work at all.

  What happens if you set these false in two: config:

  Security.SSL3.dhe_rsa_aes_128_sha
  Security.SSL3.dhe_rsa_aes_256_sha

  Are you able to connect with disabled ciphers?

• Is the plugin "OpenH264 video Codec provided by Cisco Systems, Inc." supposed to come with firefox?

  I recently reinstalled Firefox on my computer and now there is a plugin called "OpenH264 video Codec provided by Cisco Systems, Inc.". I've used Firefox for some time and have never seen this. -What is that supposed to be there. It come with the download of Firefox now?

  Hello DuckBilledPlatypus, yes it is a legitimate plugin that was introduced in firefox 33. for some technical experience on this subject, please see: http://andreasgal.com/2014/10/14/openh264-now-in-firefox/

• How to install the Codec OpenH264 of Cisco?

  I noticed that almost every time I start my computer and open every night I get a popup to download to download the codec OpenH264 by Cisco. I did and I noticed that there was an entry for it in the Add-ons Manager Plugins section and it says "will be installed soon. He had me download is a zip file which contained two files. The one who gave a short explanation of the codec and a libgmpopenh264.so file. Now, I have no idea what do with the .so to obtain file installed it in every night.

  Does anyone else have this problem and what can I do about it? I am running Xubuntu 14.04 64-bit.

  I see Pref media.gmp - gmpopenh264. * on the topic: config page.
  Media.GMP - gmpopenh264.path displays the installation path that points to the gmp-gmpopenh264 file in the Firefox profile folder.

  Bug 1009909 - Firefox desktop: integrate the media openh264 plugin in the Add-ons Manager
  Bug 1032814 - plugins Gecko media shouldn't use of well-known places for plugins

  There is also a media.gmp - manager. * Pref.
  https://wiki.Mozilla.org/GeckoMediaPlugins
  Bug 957928 - support of Plugins Gecko of the Media (GMP)

• Unable to connect to the Cisco webex. It is said 'ActiveTouch général' plugin broke down. Please advice

  I was able to connect to Cisco before. Today all of a sudden, I get this message from the plugin crash. I have even tired of reloading the page, but nothing helped.

  If you use the version of ESR Firefox 17.0.11 (help > subject) then you can upgrade to the current version of Firefox 24.3.0 ESR.

  • http://www.Mozilla.org/en-us/Firefox/organizations/all.html

• Installation TelePresense Movi Cisco Portege R700-183

  Someone has already tried to install Cisco TelePresense Movi on R700 and had it work. I have a TECRA A11 number work with the two 32 bit windows 7 and 64-bit Windows 7, but can not get working the M700. Seems to install OK, but can not make or receive video calls.

  any help at all would be appreciated.

  Hey Buddy,

  I read your ad and unfortunately I think that this has nothing to do with Toshiba. This seems to be a software problem Cisco and perhaps what it s is not compatible with Windows?

  In your case I contact Cisco support and ask for help. I'm sure they can give you a good answer what to do and if there is a updated or similar elsewhere.

  Good luck! :)