WAG320N USB

Similar Questions

• Disconnect USB Wag320N

  I bought a Monday wag320N
  Not that impressed with the signal strength wireless - whereas it is better than my 2003 D-Link, but it wasn't.

  Also, the wireless signal varies a lot...

  I tried different channels and currently set to CH1

  Also, the USB hard drive I put in place using the MediaServer as my Media Player of House - continues to fall in offline mode, this would be normally resolved by a firmware update - but as it is so new I have the latest version of the software.
  When the USB decreases, the management of storage - shows like format, so I safely remove, then it displays as deleted, I cannot then the device to refresh and recognize the hard drive again, with a complete switch power switch so that it can review the reader...

  Hope that a firmware upgrade will fix the USB problem

  Updating my situation...

  I had the same problem, with the variant signal from 1 Mbps to 54 (max for my 4 G laptop computer, connected)

  I had to keep switching the router power switch

  in any case

  I got a replacement yesterday - and what a difference - I also noticed that on the wireless setup, how it worked was different and more to how I expected to work in the first place

  On the OLD - on the 2.4 MHz range - when I chose Standard 20 Mhz - wide sleep channel selection on and I had to play with the time dropdowns to change wireless channels wide and Standard

  NOW on the new (although the number of series is older) and select Standard 20 MHz - wide drop works by and the drop down menu standard shows all 13 channels

  Carried out on all laptops speed was also a constant 54 Mbps

  I also use the media center with a 1 TB hard drive attached

  It would hang if listening to music stopped wireless, it would only show about 4 songs before we stop or even jump to the next song...

  I know that you have changed once already - but I would change once again...

  I was also disappointed with the Linksys technical support options to replace, had a very cordially chat sessions a few this performance before they agreed to replace - as they have expected me to pay port fees to replace a defective item, they provided, I will not buy or their recommendation again.

  Most of the companies I have dealt with Amazon, etc. all have to pay for the return postage...

• WAG320N and USB storage device

  How storage works with a WAG320N device via USB if I use a Ubuntu 10.04/10.10 and al?

  Makes it look like an FTP site or can I just use it as a shared folder accessible if the normal folder directory structure from any machine on the network.

  Does anyone have a screenshot of the tab of storage of the Linksys firmware like that sometimes helps them to understand the limits and capabilities.

  Thank you

  You can simply use it as a shared folder accessible from any machine in the network.

  Follow this link to see the WAG320N Simulator.

• wireless client cannot see wired - WAG320N

  Hello

  my modem/router WAG320N works fine but the wireless client cannot see wired and vice versa. they are in the same network (192.168.0.), using the same 255.255.255.0 mask, same workgroup firewall and Yes to enable all packages in and out. IP addresses are DHCP form.

  Internet sharing works fine, but when im trying to play any game on LAN wireless clients peuvent see their car but not wired. when im trying to client ping wireless from a wired machine it does not either.

  What is intresting in a DHCP reservation or the ARP table (in router configuration) I can see cable and wireless customers. but still they do not see each other.

  help pls!

  Hi again,

  I went to PC World and they exchanged this WAG320N to another. but this time I went to ASUS RT - N16 and so far all is working correctly. I know its missing adsl modem but got usb 2 and a print server.

  Sorry cisco...

  thx for your help guys!

• WAG320N FTP server not accessible from the internet.

  I had a problem with my WAG320N for quite awhile.

  I add a hard drive 1, 5 TB usb port and I can access to the LAN.

  Now I want to take a step further and be able to access it from the outside.

  I enabled the FTP server and Internet access.

  I was play within the parameters of safety etc. but with no luck

  Why you changed the ip address of the router to 192.168.1.2. ?

  Try to update firmware of the router. After upgrading the firmware, reset the router and re - configure from scratch. Now, simply activate the FTP server on the router and check.

• WAG320N 'Current time' value ' 01/01/2000 00:13:02.

  Hi all

   

  I use ' WRT54GC Firmware Version: 1.01.6 "like"PPPoE"connected to the internet and ' DHCP Server: » Enable. And "WAG320N Firmware Version: V1.00.12" "Bridge only Mode" and "'DHCP relay", and have a USB 500 GB drive HARD home. "

   

  It came to my attention that any file I have created on the USB HDD get creation date stamp in on 01/01/2000

   

  Is there a way to get the WAG320N 'Current time' at the exact time?

   

  (WRT54GC which is connected to the internet, he pulled his correct 'current time')

   

   

  TIA

   

  # This is not possible. In fact you should not even able to access the USB on the WAG. The WAG in Bridge mode is basically a modem and it should be not accessible by any IP address... I would suggest that you configure the WAG as a router and the WRT as access point...

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Boot Camp El Capitan Windows ISO USB key

  Install Windows 7 with a USB key that is already configured as a windows installation disc, Boot Camp did not acknowledge the presence of the USB and claimed installation media. I inserted the DVD and it started to install.

  Is it possible that the Thumb control procedure is no longer necessary or do I lucky/unlucky?

  If she doesn't have a drivers W7 Apple pre-start, it won't work.

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• Crash when disconnecting USB connected to the Steinberg UR-22

  Updated for Sierra recently.

  When I unplug my Steinberg UR-22 by the USB port, the operating system crashes instantly and restarts.  EVERY TIME.

  I plug/unplug often and have never had this problem until the Sierra.  I use my Air for labor and for the game, so he forces me to move to and from the Office to Home Office... or around the House.

  Any suggestions?

  Thank you!

  The Yamaha Steinberg USB driver only supports OS X 10.9, 10.10 and 10.11. You need to ask Steinberg support if or when they intend to support macOS Sierra 10.12.

• How to upload photos on a USB key on the mac pro book photo

  I just want to know how to download my pictures that are in the photos on my macbook pro to a USB for guard duty.

  Select them in Photos and export (menu, file == > export) in a folder on the desktop and in the finder, drag the foldr to the thumbdrive mounted, unlocked

  LN

• USB charger - 29W C - compatibility with 12.9 "iPad Pro

  I'm looking for an answer as to if the USB - C 29W charger is compatible with the iPad to 12.9 "Pro. I know this question has been asked and answered by the communities in the past, but when I went to the Apple Store to buy the charger today, the staff told me that the charger could damage my battery over time. I then started a support chat session to confirm the answer and the representative said (and I quote) "If 2 people advised me not to do something, I would not even waste my time." We could care less if you want to damage your unit. »

  First of all, I never got a rude responses to Apple, so it was a surprise. Secondly, I really just trying to get an answer to the question. Can anyone (especially Apple) help out me? Thank you!

  If it is not in the specs of the iPad, you're crazy to use it. The Chargers are cheap, the iPad is not.

  Barry

• Can I create a recovery bootable USB through disk utility?

  My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD drive is near death. My plan is to replace my HDD for a Virgin SSD, I perform this task several times on computers of the victory but for MAC, I wonder how I will load the new OS. Can I make a bootable USB with the recovery partition, but on a USB key tools? Unofrtunately I have more available Mac to create the USB bootable through itunes.

  My computer is the MacBook Pro (13-inch mid 2010), I have also all original packaging somewhere, if there is a CD that I can use, I certainly can get too.

  Any advice?

  Thank you!

  Apple have this to do a USB installation...

  Create an installer for OS X - Apple support bootable

  Another option is to use the diskmakerx.com application

  You must have the OS installer downloaded to make these methods of work is probably not practice on your failed drive.

  Both of these options are to run a 'normal' operating system too. The recovery partition is not 'normal '.

  Another option is to use the Internet recovery mode if your Mac supports...

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  On macOS recovery - Apple Support

  Use wired ethernet for best results, since it will download a bootable OS & then download the installer of the OS also.

  I suspect you have the update of the firmware installed to add this feature if it has been updated over the last 3 years

  You may be able to generate a score of alternative recovery to another disk (such as a USB key) If you want to just "compensation of base OS.

  OS X: on Recovery Disk Wizard - Apple Support

  A last solution would be to clone your drive failing on an external drive (or use the new SSD in a proper case). That can be done in the modes of recovery via disk utility. Basically, you use a feature to "restore" to clone one volume to another. (I don't see clear instructions for the moment so ask if you want to pursue this option).

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.