wait for a task

Similar Questions

• waiting for the task to the end host window.

  My computer startrd to show, when I restart or shutdown windows 7, I get a message saying that windows is waiting for the task host window to end what it means...?

  Hi Sanaaalsadouni,

  Thanks for posting your question in the Microsoft Community forums.

  The TASKHOST is a generic process, which acts as a host for the processes that are running DLL instead of exe files. Up TASKHOST checks the part Services of the registry to construct a list of services focused on the DLLS it needs to load, then load them.

  I suggest you try the procedure described in the article and see if it helps.

  Why my computer won't turn on or off quickly?
  http://Windows.Microsoft.com/en-us/Windows7/why-wont-my-computer-turn-on-or-off-quickly

  See the article for more information.

  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows7/see-details-about-your-computers-performance-using-Task-Manager

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• waiting for the task to be completed

  I inherited a program that tests a hardware device extensively.  A test turns or several times each channel of AI and bed the waveform of channel I.  I use a card PXI-6229 DAQ with c# .NET.  The program is suspended in the while loop, wait until the task is complete. This is the code:

  public bool TestThisChannel (object nullObject) {}
  Double coversionFactor;
  String name;
  String Description;
  _PXI6229_SLOT12.getChannelInfo ((int) nullObject, name, coversionFactor, to the Description);
  _PXI6229_SLOT12. StartAnalogInput6s (Name);
  for (int i = 0; i)< 5;="" i++)="" {="" 5="">
  _PXIChassis.SetPowerRelayOn (null);
  _PXIChassis.Wait500ms (null);
  _PXIChassis.SetPowerRelayOff (null);
  _PXIChassis.Wait500ms (null);
  }
             
  While {(_PXI6229_SLOT12.runningTask!=null)}
  } //Wait task is completed

  AnalogMultipleInputTask private task;
  runningTask of public work;
  private AsyncCallback analogCallback;
  Private AnalogMultiChannelReader analogInReader;
  public AnalogWaveformdata;

  Public Sub StartAnalogInput6s (string AIChannel)
  {
  Create a new task
  try {}
  AnalogMultipleInputTask = new Task();

  Create a virtual channel
  AnalogMultipleInputTask.AIChannels.CreateVoltageChannel (AIChannel, "",)
  (AITerminalConfiguration) (-1),-10, 10, AIVoltageUnits.Volts);

  Configure synchronization settings
                 
  AnalogMultipleInputTask.Timing.ConfigureSampleClock ("", 100000, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, 600000);
                 
  Check the task
  AnalogMultipleInputTask.Control (TaskAction.Verify);

  Prepare the table for the data
  runningTask = AnalogMultipleInputTask;
  analogInReader = new AnalogMultiChannelReader (AnalogMultipleInputTask.Stream);
  analogCallback = new AsyncCallback (EndAnalogInput);

  For .NET Framework 2.0 or a later version, use SynchronizeCallbacks to specify that the object
  Marshals the callbacks on the appropriate threads.
  analogInReader.SynchronizeCallbacks = true;
  analogInReader.BeginReadWaveform (600000, analogCallback, AnalogMultipleInputTask);
  } catch (Exception exception) {}
  MessageBox.Show (exception. (Message);
  runningTask = null;
  AnalogMultipleInputTask.Dispose ();
  }
  }

  public void EndAnalogInput (IAsyncResult ar)
  {
  Try
  {
  If (runningTask is ATR AsyncState)
  {
  Read the data of the channels
  data = analogInReader.EndReadWaveform (ar);
  }
  }
  catch (System.exception DaqException)
  {
  Display errors
  MessageBox.Show (exception. (Message);
  runningTask = null;

  AnalogMultipleInputTask.Dispose ();
  }
  }

  Any help will be appreciated.

  Thank you

  Howard

  Thanks Mason. You got me thinking on the right track.  I made a few changes based on an example I found of NOR.  I changed analogInReader.BeginReadWaveform (...) of data = analogInReader.ReadWaveform (600000) and I changed the while (_PXI6229_SLOT12.runningTask! = null) {} to _PXI6229_SLOT12.runningTask.WaitUntilDone () and it seems to work fine.

  Thanks for your help.

  Howard

• Script to wait for Clone task is completed

  Good day, as part of the post, I run a command that enables the NIC and sets the right Port-Group of cloning process. I put a sleep command in each environment is diferrent, so I find myself always change this duration of sleep because the cloning process does not end in the time of sleep and the rest of the script fails. So in order to get rid of the sleep control that I want to capture the CloneVM_Task and pass this parameter to wait-task that will force the completion of the ClonVM_Task. I could just make sure no other tasks are running but this task, but as we all know that alays can't be the case. So that's what I did.

  I begin a deployment of FVO to have an another long running task. Then I run the script.

  If ((Get - PSSnapin - name Vmware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null) {Add-PSSnapin "Vmware.VimAutomation.Core"}

  # Virtual Center details
  $server_address = "MYvCenter name" or IP

  SE connect-VIServer-Server $server_Address - user username-pass password - WarningAction SilentlyContinue

  
  #Create Master VM Templates
  #
  # Here we import the CSV file with the account information and he piped in a Foreach-object
  # Creating a Variable that imports the csv file that contains all data of the virtual machine

  CD "e:\Scripts.
  $InputFile = import-Csv "E:\scripts\mycloneinput.csv".
  $InputFile | {ForEach-Object

  $ip = $_. VM_IPAddress
  $GName = $_. VM_Guestname
  $TName = $_. Template_name
  $HName = get-VMHost "myhostname" # 1 first Select
  $Desc = $_. Description
  $Dstore = $_. Datastore_Name
  $Spec = $_. Customization
  $Folder = $_. Folder
  $Sfolder = $_. Subfolder
  $NIC = $_. NIC
  $NIC_Lable = $_. NIC_Label
  $Gateway = $_. NIC_Gateway
  $SubnetMask = "255.255.255.0".
  $DNS1 = $_. DNS1
  $DNS2 = $_. DNS2
  
  Write-host "creation: ' $GName
  Write-host "template name is: ' $TName

  # This takes variables and creates the virtual machine
  Get-OSCustomizationSpec $Spec | Get-OSCustomizationNicMapping | »
  Game-OSCustomizationNicMapping - IpMode UseStaticIP - $ip - $SubnetMask subnet mask - DNS IpAddress $DNS1, $DNS2 - DefaultGateway $Gateway
  New-VM-name $GName - location $Folder - model $TName - host $HName - $Dstore - $Desc Description data store - OSCustomizationSpec $Spec - RunAsync-confirm: $false
  
  #######################################
  #Waiting for cloning process to finish.
  #######################################

  $$$ Under notes show a little history of how I got to this point.

  $$ Note1: the first attempt, I just captured running tasks and their past to the task pending. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  $$ Note2: so I added the If Else loop below that failed, because $RTask never equaled only CloneVM_Task, but was a table of two.

  $$ Note3: I tried to us below to separate the two tasks to help

  # $RTask = get-task-status running (who captured the two tasks running)

  # $Array = $Rtask.Split("") (Errored with the method call failed because [System.Object []] contains a method named 'Split'.)
  # So I tried to divide the table like this. ForEach ($Task in $Rtask.Name - Split("")) {Write-Host "my tasks are:" $Task}

  
  Get-task-status Running | Export-CSV "E:\scripts\Current_Tasks.csv".
  $InputFile2 = import-CSV "E:\scripts\mmca\mmca_Current_Tasks.csv".
  $InputFile2 | {ForEach-Object
  $RTask = $_. Name
  Write-Host "current task is: ' $RTask
  IF ($RTask - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $RTask
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $MyTask
  }
  Else {}
  Write-Host "no cloning process is executed.
  }
  }
  
  # This allows the NIC and set the correct Port Group
  Get-VM-name $GName | Get-NetworkAdapter-name $NIC | Together-NetworkAdapter - NetworkName $NIC_Lable-confirm: $false - StartConnected $true
  
  }

  When I run the present, I get the following:

  # #This shows the task start Clonning #.

  erverId: /[email protected]:443 /
  Status: running
  IsCancelable: true
  PercentComplete: 5
  StartTime: 03/05/2013 00:52:13
  FinishTime:
  ObjectId: VirtualMachine-vm-382
  Result:
  Description: Clone virtual machine
  ExtensionData: VMware.Vim.Task
  ID: Work-task-2070
  Name: CloneVM_Task
  UID: /[email protected]:443 / task = work-work-2070 /

  #########################################################

  # #Runs through the tasks running.

  Current task: deploy the model to the FVO
  No cloning process is executed

  # Ignore deploy it task #.

  # #Matches the If statement and continues to process #.
  Current task is: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete

  # #Error #.

  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  E:\scripts\Working_Create_Master_Templates.ps1:71 tank: 24
  + Wait-task-task < < < < $RTask
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  $$$ Under notes show a little history of how I got to this point.

  Note1: The first attempt, I have just captured tasks currently running and pending their past to the task. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  NOTE2: So I added the If Else loop below which failed because $RTask never equaled only CloneVM_Task, but was a picture of two tasks.

  Note3: I tried to use the following to divide the two tasks:

  $RTask = get-task-status running (who captured the two tasks running)

  foreach ($Task in $Rtask - Split(""))
  {
  {Write-Host "my tasks are:" $Task}
  IF ($Task - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $Task
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $Task
  }
  Else {}
  Write-Host "no cloning process is executed.
  }

  
  }

  # #Output the little script above #.

  Current task: deploy OVF model CloneVM_Task
  My tasks are: deploy
  My tasks are: OVF
  My tasks are: model
  My tasks are: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete
  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  Online: 11 char: 24
  + Wait-task-task < < < < $Task
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  I'm new to Powercli and I've scoured Google for a possible answer. I thought I might have a solution that has been published on the VMware PowerCLI Forum, but I couldn't get this to work. Any help would be greatly appreciated.

  #########################################

  I wasn't worried about how to tasks where splits, unless I was trying to follow the import fo the OVF, so that the script went into the loop If and as one of the names for CloneVM_Task then he Treaty. But I got the same error I did in the last version of the above script. That's why I have the version curent thinking that if I exported and then imported the tasks it might make a difference.

  I'm new to Powercli and would like a little help. I am either very close or by a mile off. :-)

  Thank you

  Mitch

  Why don't you store the the task object that is returned when you use the RunAsync switch?

  You can create a loop around the State and wait until the clone job is done.

  $task = New-VM -Name MyVM ... -RunAsync 
  
  while($task.ExtensionData.Info.State -eq "running"){
    sleep 1  $task.ExtensionData.UpdateViewData('Info.State')
  }
  

  The big difference with the Wait-job cmdlet, it is that this will allow you to perform additional work in the While loop.

  Waiting-task the cmdlet waits just until the task is finisned and you can not do anything else.

• waiting for a task to complete

  During the planning of a work like this:
  
  () dbms_scheduler.create_job
  job_name = > a_prog_name | "_JOB."
  job_type = > 'executable. "
  job_action = > a_local_dir | '\' || File1 | ' > null',.
  enabled = > true,
  auto_drop = > true
  );
  
  
  Is it possible to wait for the work to be done before treatment can continue?
  
  Thank you
  Thomas

  Hello

  You can do this by leaving enabled-false online during the creation of employment and then by doing a run_job on the job. The run_job (with use_current_session-online true) will execute the task and wait for it to finish. If you do this, you will also need to manually deposit work using drop_job.

  Hope this helps,
  Ravi.

• How to clear, waiting for the task in the task list

  Hi friends,
  When I configure the user, the process is in the list of tasks, as
  task: System validation
  status: pending
  
  I couldn't make the process to complete the procurement process...
  
  could someone help me by making the list of tasks.
  
  Gaetan elango.

  Check this box:

  Issue during the integration of IOM with novell edirectory 8.8 9.1

• 1 program still needs to be closed: (waiting for) task host window's task to stop execution and stopping tasks that are already running

  While the closure of the pc I got the message: "1 program still needs to be closed: (pending of) task host window's task to stop execution and stop tasks that are already running".but there is no program running and I have to force it to close.how to solve?

  Hello

  Thank you for contacting Microsoft Community.
  Windows, then closing, checks all open programs. If there is, it sends a request for the program to close and wait until the program closes safely, to avoid any loss of data. But, Windows is waiting for some specified
  If you are sure that none of the programs are obviously open, you can try the following steps:
  Press Windows key + r, Type regedit and pres enter. If UAC prompts, click Yes. Go to HKEY_LOCAL_MACHINE-> expand System-> expand CurrentControlSet-> click on command (exapnd no do this). When you click (or select) control, you can see WaitToKillServiceTimeout. Double-click it to change the value. Set the value to 500 or less than that. Click Ok, and then close the registry editor. Now, restart the PC. If the problem persists, stop and try again and check.
  Be careful with registry access as incorrect values or remove the unknown keys can prevent Windows to start and it will fix it.
  Response if the issue is not resolved.

• BPEL blocked waiting for a response in a human task onMessage

  I want to run an invoke after each reception. I used the onTaskUpdated.

  My script has 4 approvers series. After the first 3, everything works fine and the invoke is executed correctly.

  After the last of them, the flow is stuck on the onMessage 'pending' node: "waiting for"onTaskUpdated"to"NewPolicyApprovalHT.TaskService". Asynchronous callback. »

  I tried to activate the onStageComplete, but then the flow is waiting for answer for both nodes onMessage.

  SOA version 11.1.1.7.0.

  Clues?

  Thank you!

  OK solved.

  Sort of (sic) the first node that is assigned to the global variable was absent.

  Thank you.

• Error: "Waiting for programs fill" while trying to add or remove programs

  Original title: cannot complete programs

  When I open Add / Remove programs in the Control Panel, the statement "waiting for programs fill" came and I waited and waited, nothing else has happened then - this hanging window. I tried the DIFFICULTY inside of MS DIFFICULTY, it did not help. Help, please.

  Hi magjoseki,
   
  Follow the steps in the section "Let fix me it myself" article and check if it helps.
  Incorrectly, Add/Remove Programs tool displays installed programs 

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 

  How to back up and restore the registry in Windows

• How you uninstall printers that are waiting for jobs left?

  Printers have been placed offline sort, but are waiting for print jobs. Try to uninstall them so that restarting windows can reinstall them.

  Hello

  1. for how long are you facing this problem?

  2. don't you make changes before this problem?

  I suggest you to perform printer troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  To uninstall the printer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Check out this link below to install the printer drivers.

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Note: If there is no pending jobs, he had to be cancelled from the system tray and then you can proceed to uninstall it.

  If the above does not work, then try to uninstall programs and features and uninstall it will ask you to remove or delete pending tasks available in the status bar.

• Wait for the update not associated with the previous update

  Just something VERY disturbing happened on Windows 7 PRO.

  When I started my machine today I received the notice:

  "Waiting for update complete"

  100%

  Do not log off the coast... (Sorry was not able to copy the exact message)

  The problem is that I shut down my computer early Sep 30,2015.

  My last update was the Sep25, 2015

  and it's around 23:00 UT 30 September 2015.

  Nothing should be changing my machine without telling me he'll do

  AND it identifies...

  On my way to this page, I noticed several very suspicious activity reports,

  as [random character string] as an ID for a Windows update.

  What is going on?

  We deserve a real explanation...

  A person found a weakness in the process of "updating" windows and exploited it?

  Member of the ACM 3622339 since 1990.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand the problem installation of updates on the system.

  Certainly, I understand your concern and will try my best to help you.

  There could be a possibility that this issue would have intervened if the updates were not installed correctly on the system.

  I can really imagine the disadvantages suffered by you during the installation of Windows updates. Sometimes it is really frustrating when things do not work correctly with the machine that we are planning and wait. So, we need find the root cause of the problem and I would definitely you help solve the problems in the right direction in order to get this fixed number.

  The question arises if the Windows Update package is not configured properly, or because of incomplete installation. I would say so, you remove any external media connected to the computer and try to crash restart your computer 2 or 3 times and check if you get through this error message.

  In addition to this, I suggest you try the following methods if you are able to boot to the desktop and check if the problem persists.

  Method 1:

  I suggest you run the Windows Update Troubleshooter to check if it works. Please follow the link given below.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Note: The troubleshooter above checks if the network card and Windows Update services work properly.

  If the problem persists, follow method 2

  Method 2:

  I suggest you to reset manually the update of Windows components. Please follow the steps outlined in the article below and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Now, you can try to run the Windows updates and check if the steps above to solve the problem.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

  Jayant

• Windows 7 poster waiting for the host window for spot on the restart or shutdown

  Every time I have shut down or restart my computer, I get a screen that says "Waiting for task host window" I tried to clean the registry, I did a chkdsk, I ran sfc/scannow several times now and this issue will not go away.  I am running Windows 7 64-bit with 4 GB of ram. I also tried to apply the patch, but I always get "this update is not applicable to your computer."

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you done any hardware or software changes to your computer recently?
  2. What is the brand and model of your computer?

  'The Taskhost' is a generic process, which acts as a host for the processes that run "DLLs" rather than "Exe". Starts, it checks the registry services part to build a list of the DLL-based services it needs to load, then load them.

  I suggest you try using the steps in this Microsoft support article and check if it helps.
  Reference:
  Why my computer won't turn on or off quickly?
  http://Windows.Microsoft.com/en-us/Windows/computer-wont-turn-on-off-quickly#1TC=Windows-7

  In addition, you can view the details on the performance of the computer of the Task Manager.
  Reference:
  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows7/see-details-about-your-computers-performance-using-Task-Manager

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Visual Studio Plugin: Waiting for Simulator to complete loading... forever.

  Win 2K 3, Visual Studio 2 k 8

  I created a Web Site (does change all the files - just left default.aspx).

  Then I changed to browse with default for blackberry.

  Then I pressed the green button of debugging.

  Beginning BlackBerry MDS - CS has been rapid.

  Then it opens emulator "BOLD" BlackBerry, and after awhile, I clicked on 'Détails' on the dialog box 'start debugging '. This is what he had:

  [Start BlackBerry MDS - CS] From BlackBerry MDS Connection Services...
  [Start BlackBerry MDS - CS] FACT!
  [Starting Device Simulator] Launch Fledge: Throwing file - C:\Program Search Plugin VS9 Motion\BlackBerry 1.2\handheld\simulator_4_6_0\fledge.exe, settings - / app = Jvm.dll / Pocket = 9000/app-param = DisableRegistration/app-param = JvmAlxConfigFile:9000.xml/app-param = JvmDebugModeOff/session for partner = 9000/app-param = MdsDebugn/app-param = BrowserDebugPort:5557/app-param BrowserDebug =n/app-param = NoTutorial/Dungeon-lcd-on/pin = 0x2100001A/app - param = BrowserDebugPort:5557, skin - BlackBerry 9000, PIN - 0x2100001A
  [Starting Device Simulator] Waiting for Simulator to finish loading...

  The device was done loading some time ago and I can even open the web browser in Microsoft device emulator and go to bing and even my http://localhost:xxxx / website1, or whatever.

  Any ideas?

  I have only 1 network card.

  I tried with my firewall and turn off.

  I got further away now though.

  I realized that if I hit F5 and then launch and I click 'Cancel' and then go to Task Manager and instead of killing the user interface process that loads the emulator instead of this I close the RIM.NET.XXX or whatever the process.

  Then wait for the emulator to access the main screen then press on F5 again to join occurs but the emulator can't hit google or my local host.

  A companion of mine office has been able to operate its box with the same approach "kill process".

  It is running Win XP with Visual Studio 2 k 8 (without service pack 1 even if the requirements say it needs service pack 1)...

  Do you think its because my OS is Win 2 k 3?

  And why did kill Rim.Net process also?

• What is the cause of the message "Waiting for Service ' Console CVD activity

  I have two related questions.

  basis, I just started centralizing 200 computers ish, all except 2 appears fine, 2 questions, one below and another with VSS errors.  This message is just for the question "in waiting for the Service.

  1. What is the cause of the message "Waiting for Service ' Console CVD activity and is there anywhere that documents these meanings of status.
  2. No idea where I should start troubleshooting the message "Waiting for Service ' I get to the computer below.

  I have a computer with this status which comes to have installed the client and will not be to centralize.  Other computers seem to work properly (centralized).

  The computer is to ping requests, but appears as disconnected in the console.

  I deleted the CVD and restarted the centralization CVD using a different policy on a different volume without change.

  Journal of the history of CVD below

  Description of the Type of weather

  31/01/2014-08:52:32 AUDIT_EVENT assign device, device: PC30866 (1995), cardiovascular disease: 11614, political CVD: don't Default - every 4hrs - no drive D (1.1)

  02/05/2014-13:53:58 politics AUDIT_EVENT assign CVD, CVD: PC30866 (11614), CVD policy: Migration Post-quotidien (1.0)

  31/01/2014 General Office EVENT 20:44:46 service error

  31/01/2014 General Office service EVENT 17:39:04 error

  31/01/2014 14:44:34 EVENT has not finished downloading, internal error, exception attached

  31/01/2014 General error from the EVENT 13:05:15 service office

  31/01/2014-12:30:37 TRANSACTION_START PC30866 - centralize endpoint

  the transaction log has an inscription mentioning a failure (not sure if it is the server or PC related) disc.

  Diseases cardiovascular diseases cardiovascular name Type State layer size (MB) data transferred (MB) branch reflector savings start time end time transfer (MB)

  Of the endpoint PC30866 centralize 11614 reading disc failed 169648 1531 0 31/01/2014 12:30:37 05 d 04:16:52

  The next event is in the application event log and the Mirage event log for the failed computer. (there were not all other errors in the paper since the deployment of mirage customer and there is no errors in the system event log)

  Event type: error
  Event source: VMware Horizon Mirage customer
  Event category: no
  Event ID: 0
  Date: 31/01/2014
  Time: 20:44:46
  User: n/a
  Computer: PC30866
  Description:
  Error general service office
  Unexpected exception taken (sender Name:Wanova.Desktop.Service.exe
  There is no policy context.
  , the object exception System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
  System.Collections.Generic.List to ' 1.set_Capacity (Int32 value)
  System.Collections.Generic.List to ' 1.EnsureCapacity (Int32 min)
  to System.Collections.Generic.List' 1. Add (T item)
  at Wanova.Net.DataTransfer.TransferStreams.SignatureResponseStream.ProcessChunk (ChunkInfo chunkInfo)
  at Wanova.Net.DataTransfer.TransferStreams.ChunkInfoDecodingStream.BeginWrite (Byte [] buffer, TransferStreamWriteCallback onWriteComplete)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteDataStreamTask (DataHandlerExecutionTask task, MarkCompletionCallback markCompletionCallback)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteTask (IExecutionTask task, MarkCompletionCallback markCompletionCallback)
  Wanova.Net.DataTransfer.ExecutionController.QueueListener (Group IExecutionTask)
  to Wanova.Common.ThreadUtils.ParamaterizedWorkItem'1.Run (object fakeParam)
  at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context (Object state)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
  at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem)
  at System.Threading.ThreadPoolWorkQueue.Dispatch)
  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback (), ends at True)

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  It turns out that this computer seems to have hard drive errors, so not a matter of mirage.

• Time-out error waiting for VMware Tools start in the prompt

  Hello people,

  I used PowerCLI 5.5 Release 1 connection to my 5.1.036098 vcenter (ESXi host 5.1.0 1065491 management).

  I'm connected (non secure warning) and be able to start the virtual machines.

  I try to run a task on the network of a VM VMware documentation example below interface.

  The first two commands work fine, but finally it fails with the error below.

  I upgraded VMware tools and hardware to the latest version.

  $vm1 = get-VM-name VM1

  $guest = get-VMGuest $vm1

  $interface = get-VMGuestNetworkInterface - VMGuest $guest - GuestUser password1 administrator - GuestPassword - ToolsWaitSecs 100

  Timeout error while you wait for VMware tools start in the comments.

  
  

  Someone at - it suggestions?

  Thank you

  romatlo

  The 3rd line to access the guest OS via VMware tools that must be installed in the virtual machine.

  There are a number of other prerequisites to be able to make that kind of call.

  See my work Will Invoke-VMScript? post.