wait for the best idea
Halo guy
I have a problem as follows:
Suppose I have table that shows the "final balance" by customer:
Customer number plug end balance balance by branch
111110000 office has 2,900. ??
Office 112237890 B 2.890?
the problem is I have a column that contains a formula: final balance (by customer) / Ending Balance (by office). I want to know the contribution by the branch of each customer.
example: 2.900/10.000--> 1,000 assumes that the balance of the branch.
How I get by branch closing balance. is it posible to use 2 analysis?
Any idea or the best suggestions guys.really enjoy. Thank you very much.
Hello anonymous user,.
First of all, if you "expect the best idea' - which is a bit presumptuous, but we will write this off under the"language barrier"- then at least have the decency to choose a proper name or a handle for this forum.
Second, this requirement, you would use a measure based on the level of the RPD which aggregates to the 'branch' level of your hierarchy, or you can use the AGGREGATE AT function in the responses.
Tags: Business Intelligence
Similar Questions
-
HP PAVILION: p6633w please give a suggestion to improve the graphics for the best games. thnx
Windows 7 64 bit all automatic updates of HP and Windows.
Don, welcome to the forum.
The first thing you need to do is to upgrade the power supply (PSU). The current PSU is only 250W. It is not enough to run a new intermediate level video cards. They require a minimum of 400W. It would be a good idea to buy at least one with 500W. This will give you more choice of cards. I love the Corsair and OCZ PSU. I always suggest measuring the current PSU and comparing measures to whichever you choose.
You should stay at 9 "or less for the duration of the video card. This ensures that it fits in the space provided. You would need a larger case to go further. I like XFX, EVGA, Sapphire and PNY in that order. The two cards in the links can be inserted into the computer and they will be good for the games. Be sure to read the 'Détails' and 'Clients' to learn more about each of them. I'm looking for products that have more than 100 customers and are at least 4 eggs. Normally, this will be a very good product.
Let us know if you have any other questions.
If your problem is solved, please click "accept as a Solution.
-
my program works in 2 processes in parallel inside a while loop and should stop when one of them ends.
How can I do? Uses the function 'Or' wire loop the stop condition will not do the job, waiting for the two processes to give their comments before running.
What I really need is a function that waits until she gets a 'true' through one of its entry and then executes without waiting than the other.
Y at - it such an option?
If not, does anyone have an idea how to achieve what I have described here?
Thanks in advance!
What you need is a "not synchronous or", i.e. "do something if Item 1 becomes real GOLD point 2 becomes true. One way that comes to mind to do is with a design of producer/consumer model (event), where the consumer is a State Machine with a shutdown state. Get 1 point to trigger an event (perhaps using a user event or property Value Change (follow the signs)) when it turns out true, and have it send to the consumer the Stop State. Download point 2, to do the same thing. Now one of them becoming true will cause the shutdown state be registered (without taking care of doing the other element), in other words, that becomes a real, (consumer) loop stops.
Bob Schor
-
CREATE INDEXES online is waiting for the TX = 4 mode
Hello
I have a strange blocking problem where an INDEX CREATE LINE is waiting for a transaction that did only inserted a line in the parent table.
Wait is mode TX = 4 (not TM locks) and I currently have it reproduced only on 11.2.0.3 and 11.2.0.4
Easy to replicate the schema SCOTT:
Session 1:
SQL > set time on
14:54:58 SQL > insert into SCOTT. Dept (DEPTNO, dname) values (50, 'test');
1 line of creation.
Session 2;
14:55:24 SQL > create index test on SCOTT. EMP (ename) online;
It's waiting ' enq: TX - line lock conflict ":"
SQL > select sid, chain_signature from v$ wait_chains where blocker_is_valid = 'TRUE '.
SID CHAIN_SIGNATURE
---------- ----------------------------------------------------------------------
603 ' SQL * Net client message' < ='enq: TX - line lock conflict '
While waiting to acquire the lock of transaction in mode 4:
SQL > select * lock gv$ where sid = 603
INST_ID SELECT ADDR KADDR SID TYPE ID1 ID2 LMODE CTIME BLOCK REQUEST
---------- ---------------- ---------------- ---------- ---- ---------- ---------- ---------- ---------- ---------- ----------
1 00000006CDA05EB8 00000006CDA05F10 603 352577 0 4 0 348 2 AE
1 00000006CDA06078 00000006CDA060D0 603 DL 779505 0 3 0 308 2
1 00000006CD9FABE0 00000006CD9FAC38 603 DL 779505 0 3 0 308 2
1 00007F28001F5028 00007F28001F5088 603 779505 0 2 0 308 2 TM
1 00007F28001F5028 00007F28001F5088 603 779510 0 4 0 308 2 TM
1 00000006CD9FA240 00000006CD9FA298 603 779505 0 4 0 308 2 OD
1 00000006B4F26790 00000006B4F26808 589847 711499 6 0 308 2 TX 603
1 00000006CDA0ED68 00000006CDA0EDC0 655377 996169 0 4 308 TX 603 0
I've traced 10046 and 10704:
broadcast message = obj 29231196672 #= 779514 tim = 1447251053634045
ksqgtl * mode TX-000f001e-000ad97c = 4 flags = 0 x 10001 timeout = 21474836 *.
ksqgtl: xcb = 0x6bb322528, ktcdix = 2147483647, topxcb = 0x6bb322528
ktcipt (topxcb) = 0 x 0
ksucti: init logon has of txn DID:
ksqgtl:
ksqlkdid: 0001-003F-0000AFC4
ksudidTrace: ksqgtl
ktcmydid(): 0001-003F-0000AFC4
ksusesdi: 0001-003F-0000AFC3
ksusetxn: 0001-003F-0000AFC4
ksqcmi: TX, f001e, ad97c mode = 4 timeout = 21474836
2015-11-11 15:11:36.566
WAITING #140700792578680: nam ='enq: TX - line lock conflict ' ela 42932082 name = | mode = 1415053316 usn < < 16 | location = sequence 983070 = obj 711036 #= 779514 tim = 1447251096566283
And there is nothing in V$ SESSION leader/block/line current. class obj # is EMP. current sql_id is the CREATE INDEX.
If anyone has an idea on:
-Why creating an index in line must wait for transactions that modified only parent table
-How to continue the investigation
-can or cannot reproduce in other versions
Thanks in advance,
Franck.
I guess you have a constraint foreign key between emp and Dept.
It's expected behaviours: since 11.1 any DML at one end of a referential integrity constraint translates into a mode lock 3 taken at the other end, and your phenomenon resembles a side effect of this.
When you try to create the index online that your session must assume that the other session (holding mode 3 on the emp and dept) may have changed the emp and dept, so it must wait for the session to the commit or rollback.
(I guess that in principle, he could walk the cancellation of the transaction see if EMP had in fact been changed - but maybe who was considered too complicated to be worth the risk to implement)
Concerning
Jonathan Lewis
Updated - I just did a quick check to reproduce the effect on 11.1.0.7
For reference - here are a few notes on modes of locking and how the application has changed over time: https://jonathanlewis.wordpress.com/2010/06/21/locks/
-
Office State is waiting for the agent
Dear all,
I manually installed agent to view a VM comments (ESX4.1), which is managed by a Virtual Center.
And then I add an individual office by the Administor Console view.
The status of office is still waiting for the agent.
Could you give points for this problem?
Thank you
Dennis Dai
Two common reasons is firewall or DNS problems.
Disable the local firewall and make sure nameresolution works in two ways.
Best regards
Linjo
If you find this information useful, please give points to "correct" or "useful".
-
Simultaneous Manager timed out waiting for the output postprocessor
Hello
I am facing this error for the first time:
After processing the request failed with the error message:
Simultaneous Manager timed out waiting for the post-processor of output at the end of this request.
I went through the log of the OPP and that:
[05/08/09 16:00:19] [UNEXPECTED] [49106:RT4628739] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:624)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:233)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:630)
at oracle.apps.fnd.cp.opp.OPPRequestThreadManager.terminateThread(OPPRequestThreadManager.java:207)
at oracle.apps.fnd.cp.opp.OPPTerminateCommand.execute(OPPTerminateCommand.java:45)
at oracle.apps.fnd.cp.opp.OPPServiceThread.processMessage(OPPServiceThread.java:240)
at oracle.apps.fnd.cp.opp.OPPServiceThread.waitForMessages(OPPServiceThread.java:227)
at oracle.apps.fnd.cp.opp.OPPServiceThread.mainLoop(OPPServiceThread.java:128)
at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
I went through the various articles and notes in the metalink:
I tried increasing the values in the following profile options to their default values in 700 900
Simultaneous response time: OPP
Waiting period of concurrent processes: OPP
but no change, can someone tell me how to decide how many seconds must be used for the profiles that is to say based on parameters, etc.
Strangley than what was going on when the data is over and for this combination of setting:
The total number of records in the output is approximately 5000
Please guide if I missed something.
Best regards
MahiYou had a bad code.
changed and he sent.
can you check and let me know?
-
Recommendations for the best 3D modeling App / program?
Does anyone have a recommendation for the best 3D modeling application / program?
(More for the creative rather than animation games and computer work)
Thank you
Hello
I love Autodesk Inventor, but you need to use BOOTCAMP or VMWare/Parallels to run it because it only works with Windows.
See you soon,.
Adam
-
Ive been waiting for 20 minutes waiting for the consultant to apple. Must be a lot of problems apple these days
A twenty minute wait is not at all unusual.
-
Delay (30000 milliseconds) waiting for the SNMP service to communicate.
When I start the SNMP service in Windows Server 2003 Enterprise 64-bit (SP2), the event ID 7009 (Timeout (30000 milliseconds) waiting for the SNMP service to communicate.), kindly help me to solve this problem.
Hello
Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
-
remote desktop hang at 'Please wait for the system event notification' during logoff
When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.There is a particular difficulty for this? I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?
Thank you
Hello
I suggest you to take a look at the answer in this thread and check if it helps.
Hope this helps,
-
I have a computer gateway laptop and when I turn it on, I have to either wait for the screen to appear or for my laptop to connect to internet, I tried several different things, and none of them seem to work.before id turn on my laptop and within seconds it would connect, now it seems that it takes forever to connect. Thank you
Hello
1. any hardware or software changes made recently before the problem?
I suggest that you follow all the steps in this article to resolve the problem.
Optimize Windows Vista for better performance
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance -
Start stuck on "Please wait for the Local Session Manager."
I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.
Had no problems to start in safe mode. Looked up various ways of addressing the problem.
Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.
Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.
Ran check on memory. No problem either.
Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.
I looked in the event viewer to see what came that time and a couple mistakes were:
Event ID 6000:
winlogon notification subscriber was unavailable to handle a notification event. Event ID 7026: the next (s) start or start failed to load system
spldr
Wanarpv6It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.
Hello
1. by chance your computer is connected to a domain environment?
2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?
If you did not disable these services make sure you disable and then check if it works.
See the article below for more information.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Please wait for the customer to political group - stop questions
Hello
I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:
Please wait for the system event Notification service.
This change after 3 minutes exactly. Next step:
Please wait for Group Policy client windows 7
is never exceeded (even after a few hours). Machine never off.
Under newspapers there are always these 4 events when the machine stops in vain:
- 6005: the winlogon notification subscriber
takes a long time to handle the notification event (Logoff). - 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber. The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
- 6006: the winlogon notification subscriber
took 180 second (s) to handle the notification event (Logoff). - 6005: the winlogon notification subscriber
takes a long time to handle the notification event (Logoff).
Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:
- 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible. The current CPP of Netlogon call on \\machine to \\server was canceled.
- 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
- 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).
There is more than 1014 events for different servers and some 131. 5783 is always alone.
I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.
However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.
I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.
Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).
Thank you
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet forum: For Windows 7
Hope this information helps.
- 6005: the winlogon notification subscriber
-
BlackBerry Q10 in waiting for the new Q10 hit sprint but what will happen to my email?
Currently, I am waiting for the new Q10 hit sprint. but I hear that I have will no longer be able to use my email with the new blackberry blackberry.net. I currently use it as my email address. 1 it's true they won't E-mail blackberry and if so what steps do I need to take to make a smooth transition?
1. Yes, the blackberry.net email is no longer available... and quite honestly, in my opinion, it's a good thing. Blackberry.net email is not available elsewhere ON your BlackBerry, you can view it on the handheld device itself and no backup otherwise. Get a free gmail, yahoo or Outlook.com account.
2. read this: Article ID: KB33260 (hosted) BlackBerry e-mail address reference for BlackBerry OS 10
Then, create and start using another free email account now. When you finally go to the thread at BlackBerry10, you will have your solution in place for shipping the blackberry.net email account.
-
Hello. I'm looking for the best way and the best way to get a product key for my windows 7 Edition family. Thanks Bob
Original title: product windows keys 7
The cheapest option is the OEM System Builder for Windows 7 Home Premium license, but has some license restrictions:
Amazon.com: Windows 7 Home Premium 64 - Bit System Builder...
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GBLicensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspxOR
A detail that does not have these restrictions:
Where can I still get Windows 7?
Full version - Microsoft Windows 7 Home Premium
Version upgrade - Microsoft Windows 7 Home Premium Upgrade
Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)
Maybe you are looking for
-
Internet problem WRT160N V3.0
Hello I just bought a new laptop (Windows 8) and I can't get an internet connection. I can connect with my router, but I don't have access to the internet. I have another laptop (Windows 7) that connects without any problems. When I used my new lapto
-
Can't make a dvd of multimedia from a file in DVD Maker .avi
I struggled for days. I bought an Insignia digital camcorder and use a card to camera 4 meg for storage memory. All I want to do is import a file from my camera and make a DVD from the file that anyone can stick to their DVD player and watch it on TV
-
Windows could not install the updates in January 2016, error 0x80071a2d
updates this week seem to originally be a continuous loop of failed to configure updates - so far have had 4 systems with the same question. -historic events shows all updates fail to install with error 0x80071a2d - anyone else seeing this or do I ha
-
I installed the demo of BBMQtRegistration in my camera BB10. When I try to run the application, he tried to connect to BBM and dialogue process is displayed. But is not able to register the app in BBM. He is continually shows dialogue process for hal
-
BlackBerry Smartphones SMS with 160 characters...
I would like to send a text message with more than 160 characters. He used to make me type everything I wanted and it would then divide into several text messages for me. The setting has been changed accidentally, and I can't find out how to put it