wake the computer after the installation of the new motherboard

Similar Questions

• Will I need to re - install Win 7 after the new motherboard

  I have a 'new' machine unfortunately screwed up. (It is refurbished, but many questions).

  I probably get a new motherboard. The technology will be able to transfer the credentials to Win 7. I ask because on the Thinkcenter and my Y480 I reinstalled Win 7 NINE times and have now good things.

  Basically, I really want to start rebuilding this machine with a lot of software, but if I have to reinstall after the new motherboard Tuesday I could wait as well. :-(

  DRM for pointers.

  For anyone following the answer is NO (less if done by the engineer).

  I asked support if the engineer should be port on my serial number for the new Board of Directors (Windows now finds the system not on a sticker card serial numbers). I was told 'no '.

  Of course, the engineer DID. My data has been flashed to the new Commission and Windows never saw a difference.

  Another wasted a few hours back up things.

• VM Wkstn issues after the new motherboard

  Hello

  I am a developer of software that uses VM Workstation to emulate client machines, servers, sharepoint etc to deploy code to and test it before you download. I use a Dell M6600 with ram of 16 gigs of the month running last win7

  Recently, the motherboard is out but I was able to access the HD and support everything including my VM. After replacing the motherboard the ATU. host OS win7 would not start. Tech., making mboard said I had to reinstall I did and everything works and GTG on the host again.

  I have installed VM wkstn 9 (what I used before) copied the VM to host and open. The first vm "resumed" without doubt as he ran to the death of mboard. The resume worked except that shortcuts etc. would not not open and what I tried to do has crashed. So I thought that a reboot may be in order.

  Well, after it reboot charges but he "APPEARS" I don't have any video as the screen is empty except the mouse you can move very well.

  If you start in safe mode you get video but everything (characters) is garbled code as the squares, slashes, circles etc. I can connect because I have this pretty well memorized screen and get on the desktop... once again only in safe mode.

  I am assuming that the new motherboard really threw the VM for a loop. I don't mind creating a new virtual machine and migration but I was hoping that there might be something I could do to my old to do a little more functional otherwise migration is going to be very difficult.

  TIA

  JB

  Here's so what finally fixed it. I copied the VM backup source again. Remove the vmem & VMS files suspense. Then, I unplugged all available hardware devices. Machine turned on and everything worked perfectly. I then added hardware devices back and all is good.

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Install the new motherboard and now asked to reactivate.

  Pretty much my old motherboard died on me in order to get a new motherboard and ram set up, after a little got it works and things are fine, until I check the system information and he said 11 days til trial, please activate Vista. "I clicked on the link sense my product code is still there and he told me reintroduce.  I try and it still says invalid code.

  Before installing the new motherboard, it was a HP computer premade, I contacted them and was told that I had to talk to Microsoft.  Sense, I've been jumping through the same process for about an hour, I decided to check the forms come out and ask here for any help.  The softwar is OEM Microsoft Vista Prem Home with SP 2.

  Help, please?

  Real, that I decided to break it down and get 7 Finally in any case, thanks for all the help

• Microsoft cares if I use my old OS OEM with the new motherboard?

  I am building a newish computer; Microsoft cares any longer, if I use my old OS OEM with the new motherboard? All of the previous answers to this question are all about 2011 are resolutely "affirmative", they care. I know that Microsoft has had a change of heart (at least I think) regarding their operating system. With the upcoming free update, I was hoping I could recycle my Windows 7 64 bit, an increase in the time up to 10 comes out.

  Thank you.

  Drew

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  If its licensed manufacturer OEM System you bought, you could probably get away with the re-activation by telephone. You can always give it a try.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Copy OEM windows 7 and the new motherboard

  As the title says my hard drive is an oem version of windows 7, but I had to replace my old motherboard, is there a way to save on the new motherboard oem?

  Thank you
  Kyle

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Transfer by car to the new motherboard with OEM wind 7 on it

  So a few days ago, I asked a similar question, but I think I found a method more efficient and I was wondering if it was possible.
  My father and I built a 2nd computer and bought another copy of OEM Windows 7 HP 64 - Bit SP1, which is the same operating system on my current computer. This new computer has specifications of superior material, including the motherboard, so I would like to transfer my drive with my OS on it to this new card a mother. Since the product key binds to the motherboard, it would be possible to ask Microsoft to temporarily remove my product key of my current motherboard (without uninstalling my OS with all my files and applications on it), so I can transfer this SSD with my OS on it to the new motherboard and then pass the product keys?
  We will always keeping this former/current computer and so I would be to reinstall the original product key to my original motherboard.
  Thank you

  When the disc authentication fails in the new PC with the old key, right click on computer and select Properties.

  At the bottom of the screen properties, it must give the authentication status and because he missed one of the options would be to get a new key. If this fails, you may need to call. This is the 1st time you used this key so should work

  There is no process to allow off-a key, when you come to install Windows on the old computer go through the process of normal authentication that will probably succeed. Only if you have reinstalled Windows on this computer with the same key too often and, recently, it fails and you must call the authentication Center. If you have both connected do not all selections and waiting and an operator should come online.

• Hard drive Windows 7 to transfer to the new motherboard without reinstalling

  Hey all -

  So, my goal is to transfer my old hard drive to a new motherboard without reinstalling my OS. I heard that it is possible, but difficult.

  If I find it's too intimidating, anyone know how I can do to reinstall my windows 7 if I don't have an installation disc? I got it through the .edu email and I don't know that I have the original installation file, is it possible for me to re - download without paying again?

  Install everything on the new motherboard, and then turn it on.  It should be like Windows Vista, it will take some time to sort itself, go online to get drivers etc (so ensure you have the new drivers for motherboard on hand like LAN, graphics etc. where it cannot find them online), but you shouldn't have to reinstall.  You will have to reactivate.

• Where to get the new motherboard for Satellite Pro L40 - 14 d

  Hey there.

  I have a Satellite Pro L40 - 14 d (I think).
  My son hit a small stool and he fell on the side of the PCI Express card (which has been inserted).
  Needless to say that the pci card no longer works.

  I opened it to the top, and it seems that the pins were torn off of the motherboard.
  Can it be fixed, I'm not so sure?

  Then someone know where I can get my hands on a new motherboard? I've scanned the internet but come in white.

  See you soon

  Hello

  This model of laptop is fairly new, and I imagine that it will be difficult to get the new motherboard. Of course, you can order one by authorized service provider, but it will be expensive.

  Have you checked eBay? With a little luck, you'll find a L40 with faulty display or any other hardware problem. Maybe using two defective notebooks, you can have one that works correctly. ;)

  By the way: I assume you want to disassemble without maintenance manuals. Be careful!

• Installation of operating system after the new motherboard

  My venus of HP with partitioned OS reinstall. If I get a new case and motherboard, will reinstall it still work or is it exclusive like Dell / is as with their installation disks? My motherboard doesn't work with the new 700 series video cards, so I have to replace the MB if I want to use the video card on that I just spent $ 300. Thank you

  My PC...

  H8 1280 t w/600w PSU

  Link... http://support.HP.com/us-en/document/c03189539

  You are the very welcome.

  The recovery disc for your model will not work on a different model motherboard.

  They are only designed to run on the original motherboard with the PC came.

  If you were to try using them, they will report and error and the installation will leave.

• After the new motherboard and processor installation Windows requires key, key to the sticker will not validate.

  I installed a new motherboard and processor to my PC and now it's me demanding in the news two days to activate windows. I type the product key that is located on the sticker and it refuses to validate. Assistance is needed.

  The key on the sticker code is assigned to the brand of the computer to which it is applied. Regardless of the brand, changed the m/b and the CPU (unless provided by the original manufacturer is a NEW computer.)

  If the advice of George do not work, you will need to purchase Windows 7 new...

• How to install the new motherboard in my XP computer?

  I need to install a motherboard in my computer, because there is a visual memory card small is 95.0 MB and I use my computer for gaming and I need a new motherboard because there is no slot for graphics card graphics card is integrated and I don't have $400 - $800 to spend on a new computer that I was hoping that some on help me and if you can it would be greatly appreciated thanks.

  * original title - anyone know how to install a motherboard? *

  Hello

  See the bottom of the article that contains information about the replacement of the motherboard.
  How to replace the motherboard on a computer that is running Windows Server 2003, Windows XP or Windows 2000
  http://support.Microsoft.com/kb/824125
  Before replacing the motherboard I recommend you back up the data on the hard drive.

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340
  After replacing the motherboard, you'll have to do a upgrade on the spot to boot to the desktop.

• Windows 7 Home Edition Premium does not start after the upgrade to the new motherboard

  A year ago, I bought a Compaq PC with a preinstalled version of Windows Vista installed. Then, I contacted HP and bought a Premium upgrade Windows 7 and starting to upgrade to Windows 7 family. Now, I came to a point where I wanted to upgrade my PC and I bought a card mother Gigabyte and a processor for the new socket. I was planning on using the same hard drive, but I found that I can not boot into Windows 7 more. The operating system is to see what he thinks, it's a brand new computer?

  Have I not the license right credentials to run Windows 7 on this computer 'new '? The old motherboard is of no use to me, and the operating system only and will only ever be used on a hard drive. If it is all ok - how can I get my Windows installation to work, keeping in mind that I only have a Windows 7 upgrade disk?

  Best regards, jazznaz

  Yes, it's a brand new computer, but you should be able to use, the license would be out of respect and you would just set it using a key of Windows 7 Edition Home Premium full version.

  Because you used the Windows Vista OEM license as a basis for the Windows 7 Home Premium upgrade qualification, this license is more in use since you changed the motherboard. This means you need to get a full license.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• No automatic updates with the new motherboard. The adjusted settings as advised by your article, restarted the computer - nothing. Downloaded new copy, same problem.

  I get a notification that there is a new update for Firefox and click on it, but the computer is unable to connect to the server and download (if not internet connection works perfectly). I downloaded a new copy and the problem was not solved. I went to your site and set the parameters as indicated by your article, restarted the computer and it is still impossible to have an automatic update as before. (Before the change of the motherboard on the computer of authorized service everything worked fine).

  Try to remove FF from your pc and then it re-download the new version.

• Installation of Win XP on a new hard drive with the new motherboard

  I have currently baught a new motherboard and hard drive.  I tried to load XP on a new 250 GB Western Digital SATA 2.0.  When you run the Windows Setup program formats the hard disk to NTFS and then said the system will restart and launch the installation.  Upon reboot, new XP starts the Setup program and wants to format the drive again.  It shows her format partition and when I go to format again once it is said that in doing so, I would be deleting files from windows that have already been installed on the system.  Why does this happen?

  Set the BIOS for SATA "Native IDE" then I deleted the partition.  RELOADED windows and the problem has been resolved.  Thanks for the help.