Want to 700-311: question of video upgrade: envy 700-311

Similar Questions

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• One last question on the upgrade from my old computer

  I bought an old HP P6243W computer

  (that's all I can afford on my disability WILL)

  I'm looking to upgrade the video card buy buying a low price PCIe Express X 16 video card

  I need a little more power video to play diablo 3

  (please forgive my ignorance)

  Question 1: A PCIe Express 2.0 X 16 will work in the slot?

  Question 2: Video made on the usage of card mother ddr2 memory can the video card, I buy using gddr3 memory?

  * Thanks in advance for any info, you may be able to give *.

  Hello:

  Yes, use a PCIe x2.0 card will work on your PC.

  However, you must get a fairly conservative, because of the power of 250W your model uses.

  My recommendation would be to get a nVidia geForce GT 610, which will be much better than the onboard video, but he only has a maximum power of 29W draw.

  Plug on the map...

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-gt-610/specifications

  And Yes... the GDDR3 memory has no effect on the DDR2 memory.

• Why Thunderbird is "create a new account to get Satisfaction" when I want to ask a question

  I know I'm bad place talk about Thunderbird, but Mozilla is a name that I trust.
  When I want to ask a question in the site of Thunderbird, I had to make new account when I tried to post the question he is asked to make another account or use Yahoo, Facebook, Twitter.

  Because of this kind of fraud and fake everything, I started using the security of Mozilla products, but it seems I was mistaken.

  Just clarify why two accounts are required to ask a question?

  Thank you

  Currently support.mozilla.org is not a Thunderbird help section. Firefox, Firefox for Android, OS of Firefox and Webmaker are under the banner of support.mozilla.org .

  It has support for Thunderbird, as 2007 or 2008 Web site.
  
  https://support.mozillamessaging.com/en-us/home
  
  I don't use Thunderbird myself and I never did support in his favor, so I can't answer your question on GetSatisfaction. But I know that Mozilla has used GetSatifaction for the Firefox support in the past and is currently using "social media" for the support to the army of the great campaign.

  As far as having to register at MozillaMessaging, none of the areas Mozilla share registration information. Addons.Mozilla.Org, the Addons Support forum, Bugzilla, SUMOand quality all require a separate registration and login. Mozilla Persona will unify this process in the near future.

  Another Thunderbird support forum is here.
  http://forums.mozillazine.org/viewforum.php?f=39
  MozillaZine for a date back to the time where the Mozilla Foundation was founded and served the semi - "official support" for one for all Mozilla programs until this current SUMO forum started.

  Many users of Firefox, SeaMonkey and Thunderbird long still use MozillaZine for any help or assistance there.

• Question about video drivers Satellite P100-257

  Hello.
  Question about video driver. Version 14.25... Works (tells... 945 GM chipset); 14.27--works but with ocassional problems (tells... 945GM/GU); version 14,29... (said 945GM/GU) - does not work at all - black screen, but you can hear sounds which tells that XP does all right.

  Why that? And what is GU? Pilot info says it is for 945GM, pilot says he's for 945GM/GU.

  All kinds of three said they are for Mobile Intel 945 GM Express chipset. Who initially my machine have said there. In section "video card" my machine said no Intel - some Calg... - don't remember exactly the name.
  Thank you very much.

  Hello

  As much as I know Satellite P100-257 supports the graphics card Mobile Intel 945GM. The code name of Intel's GM Calistoga
  This is not the same thing as the chipset Intel 945GM/GU. Both are different and so the graphics drivers are not totally compatible!

  The Intel page provides some interesting info on these chipsets:
  Mobile Intel Express Chipset 945GM

  Unfortunately, I have not found anything on the 945GM/GU.

• HP envy15t ae100: Question for HDD Upgrade

  Hi, I bought your product (HP envy15t ae100, i7 6700hq with hd530, display UHD)

  I chose 1 t byte for the hard drive. However, I want to replace personally to the ssd.

  There are several types of ssd such as SATA II, SATA III, M-Sata and ssd M2. But I do not know what type of ssd is suitable for my product.

  Thank you.

  Hi @jihaseo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15-ae100 Notebook and concerns with the replacement of the HARD disk. Here is a link to your manual page 55 for drives that would be compatible with your laptop.

  SATA drives are what is supported on your computer notebook page 112 in the manual.
   
  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• I want to ask a question about my mobile mouse memory. I googled my problem and arrived at a forum. He has not answered my question, so I want to ask a question, but I couldn't find how to ask.

  I want to ask a question about my mobile mouse memory.  I googled my problem and arrived at a forum.  He has not answered my question, so I want to ask a question, but I couldn't find how to ask.

  You can ask your question here.

• I want to watch my Canon HV20 video without downloading the video. Can I do this? How?

  I have a dell latitude E6420 with windows 7 Pro Office.  I have a Canon HV20 Camcorder.  I am connected between the two with an express firewire card.  The app from machine to machine and the film see the camera, no problem.  When I connect the video screen capture appears without a problem and I can see the video on the tape.  I want to do is watch the video without download.  I want to watch the video on the laptop, just as I watched him if the device is connected to my TV.  I saw something on the use of a camcorder as a webcam.  Would you do that?  Thanks in advance for your answer.

  INSTALLS

  Stanley thank you for your answer.  I'll try and find a canon forum.  During this time.  I don't have any software Cannon installed on my laptop.  It's a new laptop and an older camcorder.  Is the software you MENTION provides the functionality I'm looking for?  Thank you

  It can: rather than having none of the supported software to those who have made the material.   ;-)
   
  The software is located on the web page I linked to...
  http://www.USA.Canon.com/Cusa/support/consumer/camcorders/high_definition_camcorders/vixia_hv20

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• If I want to change something in my videos, should I make the entire video again?

  If I want to change something in my videos, should I make the entire video again?

  Hello

  Yes, when you change something on a video, then you must make one more time because the change is applied to the entire clip.

  If you have several clips on a timeline and and you make changes on a particular item, then just re - make this clip, all other elements will not be changed.

  Kind regards

  Navdeep Pandey

• I have creative suite 5.5 production premium, I want go to CS6, BUT I don't want a monthly. To buy an upgrade?

  I have creative suite 5.5 production premium, I want go to CS6, BUT I don't want a monthly. To buy an upgrade?

  Hi Cw16,

  Yes, you can go premium production CS 5.5 to 6 production premium CS only via online.

  Creative Suite 6 may contribute to upgrading the CS5.5 Production Premium to CS6 Production Premium.

  (1) select CS6 Production Premium

  2) click 'buy '.

  (3) change the Version, platform and quantity according to your requirement.

  4) click on "order".

  (5) enter credit card details

  Let me know if you need more help.

  Thank you!

  Florianne

• Want to 700-019 H5P24AA #BL: what is the side power maxiumum supported for a video card in Envy 700

  I want to improve my HD 8570 delivered installed video card.

  What is the rated power more of a video card that would work with the installed 450W power supply.

  CPU is 4770 I7 motherboard: MS-7826 (Kaili)

  Thank you

  The 700 WANT referenced has a 460 watt POWER supply with a PCI-E 6-pin power supply.  In addition, this particular model PC has a version 8 for most graphics cards latest UEFI BIOS which are rated to work with a 460 Watt power supply would probably work.

  Of EVGA has a NVIDIA GTX 960 modelthat requires only a single PCI-E power connector 6-pin. Other models of the EVGA GTX 960 graphics cards require a PCI-E power connector, 8 pins.

• Inspiron 530 video upgrade question card

  I have a Dell Inspiron 530 has. It has all the pieces of stock right now, but I'll put a core 2 duo E7400 in there when it happens. The next issue is that I need a video card for it. What is the best card that can be put in it without an upgrade to the PSU, yet? The power supply will not be upgraded for awhile. The motherboard is the G33M02, not 03 version version. He seems to have the 1.0.15 installed BIOS version, I will update as soon as I have the chance. It has not always been connected even to install an operating system - came empty (just bought from a wholesaler of machines of companies).

  Edit - forgot the bios information.

  Forget the 8400 GS.  This card is too old and has little to offer with regard to the performance of the game.  The HD 6450 or 610 GT are the best cards. The minimum requirement to play Mechwarrior online is the HD 6450 and the GT 610 offers similar performance.  If you want something better without too much spending, I'd recommend getting the HD 6570 HERE.  This card would have much better performance of game at the expense of others.

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Want to 700-214: upgrade of processor for a 700-214

  This office is equipped with a processor i5-4440.  Full specifications are found here:

  http://support.HP.com/us-en/document/c04100558

  According to upgrade, I can upgrade all the way to an i7-4790 (Haswell).

  Two questions:

  1.) upgrade, this means a simple replacement 'drop-in '?

  (2.) there seems to be a much more popular processor, the i7 - 4790 K.  This motherboard can be improved to the processor 4790K?

  I asked Intel, but they said the motherboard manufacturer will know.

  Steve700

  Steve, welcome to the forum.

  Steve700 wrote:
  

  This office is equipped with a processor i5-4440.  Full specifications are found here:

  http://support.HP.com/us-en/document/c04100558

  According to upgrade, I can upgrade all the way to an i7-4790 (Haswell).

  Two questions:

  1.) upgrade, this means a simple replacement 'drop-in '?  Yes.  However, you will need to ensure that you have cleaned the thermal compoud of the surface and the appropriate amount of base for the processor, as well as surface contact.

  (2.) there seems to be a much more popular processor, the i7 - 4790 K.  This motherboard can be improved to the processor 4790K?  No, not according to specifications.  The "K" indicates that the CPU can be overclocked and HP BIOS' are do not support the OC'ing.  You would be spending money for an option that does not allow.

  I asked Intel, but they said the motherboard manufacturer will know.

  Steve700

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.