want to BSOD 4 t-1000 - iaStor

Similar Questions

• Want packages of 6 t - 1000 faulty hinge

  So, I just sent back my desire 6 t-1000 for the second time today because the left hinge is completely broken and I can't even open up the laptop. I got it for a year and 5 days exactly and my warranty expired, so I pay out of their own pocket for hp to fix it.
  Back in October I made a trip, returns and my laptop had a cracked screen and after talking with hp they told me that no matter what model of 6 t - 1000 for a certain period of time had a hinge kit "defective", because it was new to hold account ultra book style.
  Ultimately I don't know why I'm really paying for HP to fix the hinge kit which is defective in the first place. Especially for $ 171 due to my being late by a meager 5 days warranty. Can anyone offer some advice or tips so that I can work with hp? I certainly don't want this to 'fix' and magically 6 months later eventually having to replace the hinge kit a 3rd time.

  I'm afraid, that I also have the same problem.

  Last week, I noticed that I used to get a cracking noise when I open or close the ultrabook. However, when I was about to close last night I got a crack on the screen, and after careful consideration there are problem with the hinge. I still havn't looked for anyone to fix it. The protection plan has expired and don't know what to do next. Help or suggestions on this will be appreciated. Thanks in advance.

• dv5t-1000

  I have a HD 320 4 GB RAM HP DV5t-1000 - Vista Home pre

  After a year, Wifi began the... problem... limited connectivity only same network could connect throughout the year... Still have not solved the problem - maybe coz I have built-in outside WLAN modem. In its broadcom b/g adapter shows Device Manager.

  I have to go to my window to connect to open my neighbor - Wifi once I connect to their open wifi - I can connect to my secured wifi and most of the time it remains until I restart.

  First the Webcam work stopped and I constantly keep get notifications of type push one of the USB device does not work... Looked on youtube to open the frame and fix small white connector next to the webcam. -a worked fine for a few days. Same problem again - a pressure strong on next to the webcam where the connector resolves the problem sometimes.

  Now, windows was able to start mentioning a few hardware changes... tried hard in SafeMode... works well in safe mode... but the overall speed is compromised... fixed issues chk dsk etc. has been able to run windows normally...

  After a few days... he fails again... the continuous mouse in treatment and nothing happens (I can move the pointer, but cannot click on anything)... this time, was a plant and restored vista backup... downloaded all updates up to SP2 - worked well for a few days and then gives ocassional freezes... have to stop by pressing Start button / stop several times...

  Ran test drive... pass the SMART Test and small test... long essay freezes when free memory checking... It moves but takes 15-20 minutes after the initial cells are quickly checked - test time freezes.

  Being a Fan of HP I already ordered a new 17-t configured to high-end... But I want to fix my old 1000, DV5t, for back-up. Please address solutions for:

  (1) WLAN limited connectivity

  (2) Webcam works not - question of device not connected USB - many users have this problem - solution

  (3) freezes and pointer retains in treatment (can move the pointer, but can't do anything) even after the restored factory. -HARD drive replacement will solve (almost 5 years - 320) or it is something to do with Vista (I know that Vista is crap - use Service Pack 2 on Vista). I was able to get out the HARD drive for the backup on another pc - I did not note all data not corrupted - no rare sound noticed while the HARD drive was out and running. What could be the problem?

  Hello MyDV5t,

  As you tried to run the test drive extended several times and he has failed to finish, I think it's the hard drive.

  Replacement must solve the problem.  Here is a link to HP Pavilion dv5 Entertainment PC Maintenance and Service of Guide, please note point 26, page 24 for a list of recommended replacement hard drives.

• How to fix error iastor.sys stop: 0x0000008E on my dell m1330

  I got a bsod stop: 0x0000008E error iastor.sys

  After that I inserted a usb flash drive. I restarted and got safe mode start upward.

  in normal mode it restarts after 2 minutes. When in SafeMode its ok.

  I already ran a registry cleaner but did ' t help.

  I am currently in safe mode to find help.

  Do not use Registry cleaners, they will make things worse. And it will not solve this prob.

  Scan your system with an anti-virus. If the flash drive is bootable put this on and then run it. Or run it in safe mode / networking

• Deskjet 1000 printer

  Hello, I'm sorry to bother everyone but I have a problem.

  I have connected my Deskjet 1000 to my computer using a USB key and it works fine.  But I would like to be able to print wireless.  Can anyone help?  I tried a lot of things, but I'm not having any luck.

  Thank you!!

  Hi Gland2014,

  Welcome to the Forums of HP's Support.  I understand that you want to make your Deskjet 1000 wireless.

  This printer does not support wireless, for your reference, I have included a link to the specifications of the printer.

  Deskjet 1000 J110a product specifications

  http://support.HP.com/us-en/document/c02231304

• What is the best way to show 1000 objects moving in a field?

  Hello. I'm trying to JavaFX 2.0 and higher. I want to create 1000 objects (because now they can be rectangles) and move them randomly (for now). What is the best way to do this? Do I have to create an initial keyframe for each object? I was watching the demo of BrickBreaker. Is all that I need? I'm looking for a simple example. For example: ColorfulCirclesSample. Basically, what I want to do is create 1000 rectangles with random attributes including a vector (direction and speed) and show them using JavaFX 2.x.
  
  Thanks in advance.
  
  ServandoC

  Not that this is the best way, but it's an example, you can try:

  import java.util.Random;
  import javafx.animation.*;
  import javafx.application.Application;
  import javafx.event.*;
  import javafx.scene.*;
  import javafx.scene.image.*;
  import javafx.scene.input.KeyEvent;
  import javafx.scene.paint.Color;
  import javafx.scene.transform.Rotate;
  import javafx.stage.Screen;
  import javafx.stage.Stage;
  import javafx.util.Duration;
  
  // animates a 1000 objects (klingons) moving around the scene at random directions and velocity.
  public class ObjectsInMotion extends Application {
    private static Random random = new Random(42);
    private static final int    N_OBJECTS   = 1000;
    private static final int    OBJECT_SIZE = 20;
    private static final Image  KLINGON = new Image("http://icons.mysitemyway.com/wp-content/gallery/green-jelly-icons-transport-travel/038998-green-jelly-icon-transport-travel-star-trek-sc43.png", OBJECT_SIZE, OBJECT_SIZE, true, true);
    public static void main(String[] args) { launch(args); }
    @Override public void start(final Stage stage) throws Exception {
      // initialize the stage to fill the screen with klingons.
      stage.setTitle("Starboard bow");
      stage.setFullScreen(true);
      final double screenWidth    = Screen.getPrimary().getBounds().getWidth();
      final double screenHeight   = Screen.getPrimary().getBounds().getHeight();
      final Group objects = new Group(constructObjects(N_OBJECTS, OBJECT_SIZE, (int) screenWidth, (int) screenHeight));
      stage.setScene(new Scene(objects, screenWidth, screenHeight, Color.MIDNIGHTBLUE.darker().darker().darker()));
      stage.show();
  
      // press any key to exit the program.
      stage.getScene().setOnKeyTyped(new EventHandler() {
        @Override public void handle(KeyEvent event) {
          stage.close();
        }
      });
  
      // move the klingons around according to their motion vectors.
      final Timeline timeline = new Timeline(
        new KeyFrame(
          new Duration(1000/30), // update the klingon's motion 30 times a second.
          new EventHandler() {
            @Override public void handle(ActionEvent event) {
              for (Node n: objects.getChildren()) {
                // apply the motion vector for this object to determine the object's new location.
                MotionVector vector = (MotionVector) n.getUserData();
                double tx = n.getTranslateX() + vector.velocity * Math.cos(Math.toRadians(vector.angle));
                double ty = n.getTranslateY() + vector.velocity * Math.sin(Math.toRadians(vector.angle));
  
                // wrap the objects around when they fall off the starfield.
                if (tx + n.getLayoutX() > screenWidth)  tx -= screenWidth;
                if (tx + n.getLayoutX() < 0)            tx += screenWidth;
                if (ty + n.getLayoutY() > screenHeight) ty -= screenHeight;
                if (ty + n.getLayoutY() < 0)            ty += screenHeight;
  
                // update the object co-ordinates.
                n.setTranslateX(tx);
                n.setTranslateY(ty);
              }
            }
          }
        )
      );
      timeline.setRate(5);
      timeline.getCurrentRate();
      timeline.setCycleCount(Animation.INDEFINITE);
      timeline.play();
    }
  
    // construct an array of n objects of rectangular size spaced randomly within a field of width and height.
    private Node[] constructObjects(final int n, final int size, final int width, final int height) {
      Node[] nodes = new Node[n];
      for (int i = 0; i < n; i++) {
        ImageView node = new ImageView(KLINGON);
        node.setLayoutX(random.nextInt(width  - size / 2));
        node.setLayoutY(random.nextInt(height - size / 2));
        MotionVector vector = new MotionVector();
        node.setUserData(vector);
        // rotate the klingon to align with the motion vector accounting for the klingon image initially pointing south-west.
        node.getTransforms().add(new Rotate(vector.angle + 225, node.getFitWidth() / 2, node.getFitHeight() / 2));
        nodes[i] = node;
      }
  
      return nodes;
    }
  
    // polar co-ordinates of a motion vector.
    class MotionVector {
      final double velocity = random.nextDouble();
      final double angle    = random.nextDouble() * 360;
    }
  }
  

• Disable the check for plugin updates

  Hi, we are using firefox on linux centos on about 1,000 computers. We use Firefox 10.0.7 ESR. For our applications, we need JRE1.6_17.

  The problem is that some of our intranet pages has stopped working. I discovered, that the java plugin has been disabled. It has been disabled because the user clicked Yes when asked that the plugin was old and it will be disabled.

  I tried to change the "plugins.update.url" in subject: config, but always found firefox, that the plugin is old.

  My questio is: is there a way to disable checking of plugin (at least for java plugin) in subject: config or by using a config file?

  I know that it is possible to do by clicking on, but if someone wants to do that on 1000 computers using several user profiles with machines to spread its 500 kilometres, please contact me.

  You will probably need to disable blocklisting and remove the current blocklist.xml file in order to avoid the plugins to have blocked.
  
  It is not really recommended, so be careful to make such a change.

  • http://KB.mozillazine.org/extensions.blocklist.enabled
  • http://KB.mozillazine.org/blocklist.XML
  • https://addons.Mozilla.org/en-us/Firefox/blocked/

• Alureon Trojan & reboot loop

  My asus laptop (3 years) a 'alureon trojan', my anti-virus figure it out this morning. But now, my laptop is in a continuous reboot loop and I can not even past. I tried connecting all modes and it restarts just my computer. I don't know if it's the job of the Trojan horse (I am not very well informed on computers) or something else, but if it isn't then I can't even past the BSOD page to fix my Trojan? Can someone please help? I don't need to work I just want the BSOD. I reformat my laptop but I have some very important pictures (sentimental) that are only on my computer.
  Can someone help me please?
  Thank you
  Camille

  You can use the Microsoft Standalone System Sweeper to try to remove the Trojan horse without starting Windows.

  If System Sweeper cannot repair your computer, you will need to use a Linux system on a CD or USB stick to copy your photos from the hard disk before get back you in shape. Post back for more if you need to do.

• my PC and windows 10 cannot play nice how to keep windows 7 and no. unwanted Windows 10 updares or auto download to Bam Windows 10 MORE EVER

  I tried windows 10 and have used the functionality of recovery more than the computer itself for 3 months!

  so I unchecked give me recommended updates the same way I receive important updates.

  so, if I find a bunch of optional updates, even though they say windows 7 are actually for windows 10 as I've already seen 2 updates that others say are the door open for download this piece of JUNK!

  my PC works well MICROSOFT with windows 7, I want 10 free WINDOWS and I sure I want to pay $10 or $1000 for it not today tomorrow not ever.

  rant on so if I see recommended updates I can assume this is striktly for my windows 7 ultimate only see I disabled the above mentioned check.

  I can also uninstall IE 11 and my PC will work as expected I use chrome for now at least is not in my face all the time Hey upgrade to windows 10.

  Please let know us if I can use my windows 7 and Mossy on the road, knowing that any updates I install recommended updates will keep my PC running windows 7.

  Thank you

  You cannot uninstall IE, but you can disable it.  Go to your "run" box and type optionalfeatures (one word) and in the next area, you get just disable IE.

• BLOB of VARCHAR2

  I have a form that uses our "Document Control engineer" in the catalogue of documents stored on a server. I use an element file browse to enter the path to the document, using the example of the sample File Upload and Download application packaged as a guide.  It works great...  My table has of these (and more) fields:

  MY_TABLE

  TABLE_ID

  ITEMNO

  ITEM_TITLE

  FILE NAME

  FILE_MIMETYPE

  FILE_CHARSET

  FILE_BLOB

  FILE_BLOB_LAST_UPDATE

  My report (reduced) resembles the table below without the FILE_BLOB column. I can't display this column in the report, rather I was asked by my boss to create a report that can be run and which checks that the path is correct. The form which it originates has the status and other information which I think I can use to compare the BLOB link with where the document must actually be stored IF the user has completed the form correctly.

  TABLE_ID	DOWNLOAD	ITEMNO	ITEM_TITLE	FILE name	MY COLUMN of FILE_BLOB I WANT YOU DISPLAY TEXT
  1000	Open	AR-BIKE	HOW TO RIDE A BIKE	bikeRide.pdf	\\myServer\myFolder\bideRide.PDF

  As I type this I wonder if there is another solution to this, which could cause validations for each step of the form so that the user has no chance to save the form, unless the link is created correctly.

  Your suggestions of experts are apty appreciated in advance!

  Thank you!

  Alexandra Robin wrote:

  I have a form that uses our "Document Control engineer" in the catalogue of documents stored on a server. I use an element file browse to enter the path to the document, using the example of the sample File Upload and Download application packaged as a guide.  It works great...  My table has of these (and more) fields:

  MY_TABLE

  TABLE_ID

  ITEMNO

  ITEM_TITLE

  FILE NAME

  FILE_MIMETYPE

  FILE_CHARSET

  FILE_BLOB

  FILE_BLOB_LAST_UPDATE

  My report (reduced) resembles the table below without the FILE_BLOB column. I can't display this column in the report, rather I was asked by my boss to create a report that can be run and which checks that the path is correct. The form which it originates has the status and other information which I think I can use to compare the BLOB link with where the document must actually be stored IF the user has completed the form correctly.

  TABLE_ID	DOWNLOAD	ITEMNO	ITEM_TITLE	FILE name	MY COLUMN of FILE_BLOB I WANT YOU DISPLAY TEXT
  1000	Open	AR-BIKE	HOW TO RIDE A BIKE	bikeRide.pdf	\\myServer\myFolder\bideRide.PDF

  As I type this I wonder if there is another solution to this, which could cause validations for each step of the form so that the user has no chance to save the form, unless the link is created correctly.

  Your suggestions of experts are apty appreciated in advance!

  Thank you!

  You seem to have misunderstood how it actually works. The FILE_BLOB column contains the [full] contents of the downloaded file, not a reference path to the original location. BLOB = Binary Large OBject is a container for non structured (as far as the DB is concerned) of the raw data.

  As I pointed out in your previous thread, for reasons of security and protection of personal information that the path to the original file is completely impossible to get through the database by using the file download mechanism (unless you use some insecure Internet Explorer configurations).

• Muse Adobe max number of photos

  Hello! I am creating a website with Adobe Muse. I want to download more than 1000 photos of my pages and would like to know if this is possible.

  There is no limit set for the download of images in Muse, but yes with a higher number of images or image size will slow down the download so site render in the browser.

  Here you can find a similar description:

  MUSE - max n ° of pages

  In the case where you use BC accommodation then library allows you to download multiple images which would complement not Muse assets, but will serve as a external source for Muse.

  Thank you

  Sanjit

• How does the new open Action?

  I m trying to say a button to start the timeline to a certain position. In 2014, version of the menu open action is different from the previous. I Don t understand where I m, is to enter the number of the timeline in the box that opens. In the previous he located a problem, but now I can´t write the number if I Don t also choose a target for action. But I Don t have a target? I want just the timeline from 1000.

  Well, I had to choose the scene as a target, apparently. Problem solved.

• Remove duplicates of column

  Hello
  a sql question please
  I have a request
  
  SELECT name, salary
  from t1
  
  It shows as
  name salary
  John 1000
  John 2000
  Sally 1500
  
  
  I want to show like
  John 1000
  BLANK2000
  Sally 1500
  
  is it feasible? No report of oracle is used
  
  Thank you
  
  Published by: user8803475 on October 29, 2012 16:57

  Hello

  Your end may be a simple way to do it.
  In SQL * Plus, for example, all you have to say is

  BREAK  ON name
  

  before the query and it will not display the same name twice in a row.

• datapump exp problem

  Hello
  I need to export more than 1,000 tables with the expdp INCLUDE clause but I know the maximum length allowed is 4000 bytes, including the quotes, which means that the actual maximum length is 3998 bytes.
  
  How can I work around this problem in the expdp INCLUDE clause?

  Osama_mustafa wrote:
  If you have the same table on different schema then I suggest before start to export your filtering database don't you never hear of synonym and view or give you more option to avoid duplicate on your schema tables, in this case you will export less tables.

  I don't know what you're saying here, if you include in the list the schema1.table_1 table and schema2.table_1 are specified AND export user has the appropriate privileges, Oracle and expdp are smart enough to distinguish between 2 tables in the different schema. No idea why views synonyms, grants, no matter, as long as the object name is prefixed by schema, you should be ok.

  Dear OP,

  You want to export tables of 1000, but you do not tell us these 1000 out of 1100 or 10000. If it is out of 1100 so it is easier to EXCLUDE those that you don't want, but the best solution could be the list owner and table_Name in a table and provide the use IN paragraph rather than providing a long list of tables.

  Also, you CAN provide two INCLUDE and to EXCLUDE in a command line, so I would recommend that you use a table that contains the names of owner and of the table you want to export. It will make your life easier. As long as the user-exporter (i.e. who run expdp) has the appropriate privileges, you should have no problem.

  REDA

• SQL for the calculation of the salary

  Version: 11.2
  
  Permanent employees get monthly salary, contract workers get only commission.
  Some permanent employees such as PETER and JOHANN get salary and Commission
  
  
  I want to find the total amount paid to permanent and non-permanent.
  
  The computation of the total, for employees who receive the salary and Commission as PETER and JOHANN, I want to ignore the Commission and considers that pay them for the calculation of total compensation.
  

  ie. When computing the total amount paid to all these employees
  
      I want to ignore commision of 400 received by PETER 
      and
      I want to ignore commision of 1000 received by  JOHANN

  That is to say. The Total amount paid will be: 18 500
  
  

  create table pay_master (emp_type varchar2(50) , empname varchar2(50), salary number , comm number );
  
  
  insert into pay_master values ( 'PERM', 'KAREN' , 2000, 0 );
  insert into pay_master values ( 'PERM', 'HANS'  , 3000, 0 );
  insert into pay_master values ( 'CONTRACT', 'KEITH'  , 0, 1000 );
  
  insert into pay_master values ( 'CONTRACT', 'ABDUL'  , 0, 2000 );
  insert into pay_master values ( 'PERM', 'KRISHNA'  , 1000, 0 );
  insert into pay_master values ( 'CONTRACT', 'CHENG'  , 0, 1500 );
  insert into pay_master values ( 'PERM', 'PETER'  , 5000, 400 );
  insert into pay_master values ( 'PERM', 'JOHANN'  , 3000, 1000 );
  
  
  col EMP_TYPE format a10
  col EMPNAME format a10
  
  SQL> select * From pay_master order by empname;
  
  EMP_TYPE   EMPNAME        SALARY       COMM
  ---------- ---------- ---------- ----------
  CONTRACT   ABDUL               0       2000
  CONTRACT   CHENG               0       1500
  PERM       HANS             3000          0
  PERM       JOHANN           3000       1000           ---------------> Ignore this commision when calculating the total pay
  PERM       KAREN            2000          0
  CONTRACT   KEITH               0       1000
  PERM       KRISHNA          1000          0
  PERM       PETER            5000        400           ---------------> Ignore this commision when calculating the total pay
  
  8 rows selected.
  
  SQL> select EMPNAME , salary+comm from pay_master order by empname;
  
  EMPNAME    SALARY+COMM
  ---------- -----------
  ABDUL             2000
  CHENG             1500
  HANS              3000
  JOHANN            4000
  KAREN             2000
  KEITH             1000
  KRISHNA           1000
  PETER             5400
  
  8 rows selected.
  
  SQL> select sum(salary+comm) from pay_master;
  
  SUM(SALARY+COMM)
  ----------------
             19900
  
  
  Expected output from the SQL with the above mentioned logic is 18500

  How can I do this in SQL? I think that I can't use CASE here statement because the CASE statement works only in a single column. Right?

  Hello

  J.Kiechle wrote:
  ... I think that I can't use CASE here statement because the CASE statement works only in a single column. Right?

  A CASE results in a single value expression. It may depend on any number of columns (that is, of reference): 0, 1, 2, 3 or more.

  For example, the following is based on 2 columns, x and y:

  CASE
      WHEN  x > y
      THEN  x
      ELSE  y
  END
  

  which is just another way to get the same results that

  GREATEST (x, y)
  

  You can use either of the foregoing, for your problem (assuming that the salary and the Commission are always 0 or more).

  Published by: Frank Kulash, Sep 21, 2012 05:40