Want to change graphics Card

Similar Questions

• Satellite A100-784 - change graphics card

  Hi I have a laptop and I want to change my card Graphic (Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub) because it is taking does not support hardware T & L and Vertex Shader version 2.0

  Is this possible and if can't update the map Graphic memory from 128 MB to 512 and how?

  Hey Buddy,

  Just check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57984&TSTART=0

  It s among hundreds of them on the upgrade of the graphics card.

  Update of graphics card memory is also not possible because he will be controlled automatically and part of the RAM will be used for the GPU RAM.

• I have a pavilion dv7 7000. I want to change my card to default chart to 630 m not intel nvidia gc.

  I have a pavilion dv7 7000. I want to change my card to default chart to 630 m not intel nvidia graphics HD 4000.

  Hello

  Go in the NVIDIA Control Panel, and then select manage 3D settings.  Now, click the global settings tab, and then select it Auto drop down. Now select processor High Performance NVIDIA.

  The drawback with the above is that you will consume more energy and your system can run on battery as long. An Alternative is to select the program tab and then just add the program you want to run on the processor performance, NVIDIA.

• Pavilion P7-1414: HP-P7-1414 change graphics card

  IM considering changing my 960 GTX graphics card. He would hold in my office and it works with AMD A8-5500?

  Hello @zkdls94,

  This one has a system recommended 300 w power.  You will not have to upgrade the power supply.  However, since it has the support of the bus PCI Express 3.0, you may still experience a lack of performance.  I can't recommend a diet.  If you choose to go with the first graphics card, you must upgrade the PSU to something that is at least 400 W.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Tecra S10 - change graphics card

  Hello

  I hava a Tecra S10 and it's a good computer. The only thing I would change is the graphics card. I have a Nvidia Quadro NVS 150 M and I would like to know if it is possible to change it to another. I wish I had a better game experience.

  Good day
  Thank you

  Hello

  I think that this article is right for you
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZW0007R01.htm

• Change graphics card on Tecra 9100

  Anyone know if it is possible to change the graphics card? It is a tecra 9100? and where to buy?

  As far as I know that it is not possible to Exchange unique pieces like the graphics card and CPU. Graphics card is part of the main map (fixed mounted). For more information you can contact Toshiba service in your country.

• Message "no Audio output device is installed" after changing graphics card

  Hello

  Thanks in advance for your help. I have a desktop pavilion, model No. KZ754AA. I just got a new graphics card installed, and as has been done, the above message appears in my "speaker" icon. devices and when I click on playback devices are NVIDIA hdmi output, however, it is said also they are not connected but I know that the cable is properly connected. I used to have installed Realtek I think, but that has now disappeared. I tried d/l of HP drivers, but it still did not work. Help, please. Thank you

  Hello:

  The solution is simple, but obscure.

  So, I'm happy that you came here before making a lot of troubleshooting that most of us would try unless we knew that the answer is simple.

  Why it happened...

  Your PC think you have installed not only a video card, but also a sound card, because it has built-in HDMI sound card.

  Thus, he dutifully automatically disabled the integrated audio system as it disabled the embedded video.

  Restart the computer and press the F10 key at the beginning of the HP welcome screen to access the BIOS.

  Looking for an embedded audio setting normally in the device setup menu.

  You will find it the value auto or off.

  Change the setting to "Enabled". Save the setting it by hitting the F10 key and again when you go out to save settings and exit.

  When you restart in Windows, you should now have your new built-in audio system and when you plug an HDMI cable from your video to your TV card, you should then get the HDMI audio.

  Paul

• Internet does not work after changing graphics card.

  Hello

  I have a HP Pavilion HPE h8-1212 on windows 7 (64-bit) and I changed my graphics card for an AMD Radeon HD 7790 so like my case.

  after reboot and installation of my graphic card drivers, I noticed that I have yet 2 "Bluetooth devices" (bluetooth device) and I don't have a Wifi connection. I am currently connected to my internet via an Ethernet cable.

  Here are some screenshots of my problems:

  

  

  Please help me with this.

  The wifi card, if it's a minimap, as it is in the image, should have had two sons goes to the card wifi which were channelled through the case.  These were responsible for picking up the wifi signals to work.  Since the screenshot shows the weak or no signal, I suspect this is the question.

  

  As to describe the process of removing antennas, I couldn't find the following steps.

  Before you start: Remove the access panel, the collar, the higher optical drive and the upper bezel.

  1. Detach the antennas wireless the wireless LAN card.
  
  
  2. Cut the cable tie fixing connectors antenna for the front i/o cable harness.
  
  
  3. Pull the antenna cables without wire through the access hole in the upper part of the unit.
  
  
  4. Pick up each cable hooks fixing the top of the page of the PC.
  
  
  5. Detach the screws for each antenna.
  
  
  6. Pull the antennas of the unit off.

  In the end, it seems that the antennas are routed right under the top cover.

• HP ENVY 17-j162ss - Enable change graphics card on the BIOS

  Hello

  I would like to change the graphics card (intel vs ati) in my BIOS, but I have not any menu option in there.

  My laptop is a HP ENVY 17-j162ss

  Thank you

  You use the NVIDIA Control Panel to control how and when the graphics card performance can be activated. There is no current option that allows the command BIOS graphics solutions.

• Stop changing graphics card, is - it possible?

  Heelo,

  I just bought an Acer Aspire V3 - 772G - 747 has 161 .12TBDWarmm and it has an integrated GPU: dedicated Intel HD Gprahics 4600 and a GPU: GeForce GTX 760 m and I wanted to know if it is possible to stop the GPU switching. I also want to mention that I keep the laptop loaded for most, not on battery. I play a lot of games and most of them do not see the GeForce GPU in settings/settings.. .they see Intel one. I noticed that the monitor is connected to the Intel GPU.
  [edited to conform to the guidelines]

  Best regards

  Bogdan

  what the user above me suggested will work fine.

  It will define the default graphics card nvidia processor, so if your laptop is not plugged, it evacuates the battery much faster. If you use your laptop on battery power a lot, I would say opening the nvidia Control Panel, by clicking the menu "desktop" at the top of the window and check the "add"run with GPU"menu tocontext' option."

  You can then right click on a file executable games and select the graphics you want to use for this game.

  in this way, you can choose to use your nvidia card only for games that require it and avoid draining your battery when you do not play.

• Upgrade/change graphics card on laptop HP Probook 4740 s

  Hi all

  can I change my graphics card AMD Radeon HD 7650 m 2 gb with the same or different series?

  I have a laptop HP probook 4740 s, here are the specs of the tour:
  http://prntscr.com/1q1mu6

  Kind regards.

  Your graphics chip is integrated into the motherboard. You cannot change this as you would on a desktop computer.

• System does not boot after changing graphics card

  I'm under VMware ESXi 4.1 on HP xw8400 workstation. He worked well with HP Nvidia Quadro FX1400 graphics card, but after a while I became tired of all that noise and he changed his Asus Nvidia 7300LE. Now the system stucks on vfat successfully loaded.

  If I re - install the system with this another graphics card, it'll work?

  Strange that a simple graphics as blocked change the boot process.

  Maybe you order card PCI is also change.

  Simple, you can reinstall your host and then re-import the VMFS volumes.

  If you have local storage, make sure not to format the existing VMFS partition.

  André

• WANT to 4 graphics card upgrade

  HelloW,

  I use HP ENVY 4 1212TU, which comes with graphics INTEL HD 4000, I can add additional graphics card to this topic? As series from Nvidia?

  Hello

  No, you can't. The Intel chip is soldered to the motherboard. Moreover, we cannot upgrade several cards on laptops.

  Kind regards.

• My computer freezes when playing mass effect, I changed graphics cards and the game lasted 2 hours of game, then it froze again.

  It's a pc zoostorm, with 2 9800gt graphics cards, it should be able to support these games however at random intervals the pc would freeze with no error message.

  I have:
  -graphics cards to switch
  -updated from xp to vista
  -a got the update for directx
  -downloaded all the drivers from nvidia, even if I get an audio download that says it cannot find compatible devices when you search for the motherboard.

  Hello

  Just that your graphics card does not support the game. Try to update the drivers for your graphics card, it will work.
   
  Also try to reduce the check and accerelation of material:

  http://support.Microsoft.com/kb/263039

• WANT 810qe Office: graphics card update

  Hello

  One of my colleagues has just bought this machine, the Office of 810qe WANT from Costco. The link to the form:

  http://www.Costco.com/HP-envy-810qe-desktop-%7C-Intel-Core-I7-%7C-Blu-ray-%7C-4GB-graphics.product.1...

  He is planning on the upgrade of its graphics. According to the specifications of the Web site, the box has a power of 500w. Any suggestions on a good upgrade?

  Thank you

  Thanks for the other post lock message. T

  technical support that he gives no indication on a map of replacement or upgrade. Instead, they used it as an opportunity for the development of the business: IE. sell a replacement card at an inflated price.

  I guess I can't blame them seeing as how HP income continues to fall.

  This experience of tech support everything including the boards of MGS will certainly influence my future decision to buy another hp.

  Thank you for clarification if necessary.

  All the best.