want to learn about this process

Similar Questions

• CS6 serial numbers or CS5.5 (or CS4 for PC) is possible for my mac crossgrade? If so, how can I go about this process?

  CS6 serial numbers or CS5.5 (or CS4 for PC) is possible for my mac crossgrade? If so, how can I go about this process?

  Exchange a product for a different version of the language or platform

  Mylenium

• want to learn about my adapter linksys AE6000 wireless

  just bought. and the implementation has been child's play! iam already see some improved effects when iam on some websites, websites that gave me the sentence, etc. but in truth, slow page loading is the initial MRI of time using this feature. the question is, since his double band, a band is more than 60 Mbps, while the other is about 50 Mbps... what group are using my pc? both?

  In addition, the installation disk, can I remove it?

  Hello! and I thank you.

• Disable "Do you want to put an end to this process?" pop up

  What is a necessity to do to eliminate that pop-up of the elimination of the unnecessary process (do you want to put an end to this process?) that anyone gets any time we use the Task Manager to remove a process? Do it!!

  I was unable to find a way to remove the warning message - I think that it is incorporated into the code.  I searched the registry and found no entry to complete the process and nothing meaningful for same Task Manager - so it must be controlled by a system file which, if we could find the same, cannot be changed by all the means available to us (which means that you or me or probably anyone outside the development of Microsoft).  I suspect that they put there to make sure that a process or service, or that is not finished by accident (which could cause the system to crash).  In fact, despite the annoyances (like you, I too would turn off if it were possible, because I am convinced that what I'm doing), I agree here because the consequences of a mistake can be severe, and too many people are not careful enough when you press the buttons.

  Then I tried to use another program, Process Explorer, http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx which is an improved version of the Task Manager. However, when I went to kill a process, I had again a confirmation warning message - if this isn't a way to bypass the confirmation message.

  Sorry if this isn't what you wanted to hear, but this confirmation message cannot be disabled.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The application is not responding. The program can meet again if you wait. You want to put an end to this process

  Whenever logged on windows 7, I get the following message:

  "The application is not responding.  The program can meet again if you wait.
  Do you want to put an end to this process"with the choice of the end of the process and cancel.
  When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
  I can't use my phone at all in this way, so I hope you can help me.
  Sven

  Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Select a restore point to a period where it was all is OK

• I want to learn more about the KB of download 976972 x 64

  Windows7 Runninf x 64 after having read about this problem on the other site on error (0 x 80070002)) after a backup on a usb drive, you start getting errors, say it has not copied any files for download of backup and gives the error messages like Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\SyncUP file. Error: (the system cannot find the specified file. (0 x 80070002)) then after reading seen has more information at the bottom of the page and sent me to get this download, Ko 976972 x 64 I recorded the file did not install until I have find more information on this file. Because Microsoft do not say it is a fix for the problem that you don't know exactly what the download will cause your computer... repeatedly it screws your computer upward. It seems that you could let me fix man do it for you if its is an easy solution. but they do not. I don't want to reinstall or obtain registry cleaners or more * that operate funny things. computers have all these problems come from the factory which is wrong, they should be tested for flawes before shipping... someone know more info about this download Mirosoft only please. would be nice to help... Thank you

  Hello

  Welcome to the Microsoft community.

  I suggest you return the item for more information:

  You experience problems when you move data via the USB port of a Windows 7

  I hope this helps. Let us know if you need more assistance.

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  Hello

  You must define a site in Dreamweaver and need to set up your FTP server. One for that, you can connect with the FTP server where your FrontPage is loaded and you can get the copy of the said locally.

  Link below explains how.

  Define a Site in DW

  Define a site in Dreamweaver. Adobe Dreamweaver CC tutorials

  https://www.YouTube.com/watch?v=sHAvSbdRgu8

  Connection to the FTP server

  https://helpx.Adobe.com/Dreamweaver/using/connect-remote-server.html

  Using Dreamweaver | Edit an existing remote Web site

  Concerning

  Vivek

• I have a book on the step by step Microsoft Windows XP and I want to learn what are the practice files, and how are they used?

  Now I am learning something about this book that I have on the Microsoft Windows Xp step by step book, and I want to start learning what I need to learn, but I need you all to be a little patient with me here. If I make mistakes its because I am only a human being I'm not a machine. First of all, let me explain something to everyone here. A person must be motivated by trying to do here. And for me, I found a motivational inspiration. A very

  beautiful child that was posted on my homepage to my computer. some other people keep their photos of children and everything on them. I ask that I get this one thing to keep, if this isn't a script or anything harm my computer. You can all tell me this good and what are these practice files, and before you'll understand that I don't have service Pack 1, 2 and 3. already in my computer now.

  .. What are these practice files?

  If a CD accompanying the book Windows XP step by step , the exercise files are on the CD.

• I use Windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  I use windows XP Home Edition. It takes awhile to start when I turn on the computer. How can I speed up this process?

  original title: slow start
  • Faster processor.
  • Fastest hard drive.
  • Faster or more RAM/memory.
  • Less things loading at startup.
  • Appropriate and the most recent hardware device drivers.

  In XP, you can cleanup and optimize it in some way, by using the following tips:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are up-to-date and should work fine - there is another thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server?

  All new computer running windows 7 64 bit, outlook and office 2007 installed, initial problems with the temporary user profiles, follow up advice and removed user profiles in the system registry and all seemed to go well. Computer works for about a week with two user profiles and now all of a sudden I get an error message when I start Outlook and from time to time when you browse the internet, it reads:

  The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server? (If I hit Yes then I can send emails)

  When I open view certificate it says: this root CA certificate is not approved. To enable trust, install this certificate into the store certificate authorities roots of trust. (Attributed to and: Cisco device demo certificate - valid from 10/02/2009 to 03/10/2019).

  Problem is I don't know what the certificate is, what I need, to find out how locate, how to move etc, I have read a few forums, but they are starting to be too technical. I need help for step by step easy.

  I tried to uninstall outlook 2007 and reloading and clearing of the States of ssl in internet options, and then reset by default (as someone suggested), but it made no difference.

  Problem is when you leave the store with the new computer, nobody wants to know you if you need assistance!

  Can someone please help? Thank you

  Hello

  Welcome.

  Just a tip, never download and install anything on your PC, unless you know and trust him.

  > «Computer brand new...» I need help for step by step easy. »

  Contact the PC manufacturer emphatically support team.

  > ".. . Office 2007 installed...

  Support to the: http://answers.microsoft.com/en-us/office/default.aspx#tab=1 and ask your question in Outlook it.

  You can also check if this problem occurs when you use Windows Live Mail, which can be downloaded on: http://download.live.com/wlmail.

  > «Server that you are connected using a security certificate which cannot be verified...» »

  Just learn more about the certification of server to the: http://en.wikipedia.org/wiki/Certificate_server .

  Remember: keep the system tools and security update.

  Success.

  Rgds.

  itconcerned

• [Help] I want to learn Sessions

  Hello

  I want to learn more about the session.

  I want to know how to show a "heelo $user" what user login

  and display or hide things depend on the access level of the user.

  Can someone tell me where to start please?

  Thank you...

  See also this description in the Dreamweaver FAQ.

• Learning about scripts, XHMTL, etc..

  Hello. I used worth GoLive and Dreamweaver to produce a couple of websites, but I would better understand the basics of running a Web site. Specifically, I would like to learn more about XHTML, PHP, ASP, etc script. I would like to know specifically what they are all, and when I might need to use what to create different functions.
  
  I don't mean to become a web developer hand full. My interest in this is mainly to be able to identify when I need help out and be able to communicate with the 'real' web developers I'd also be interested to know a little HTML, so I can go in the back-end of Dreamweaver and GoLive to identify what the question is, when problems arise. And if all goes well to be able to fix them myself.
  
  My question is really in two parts - what should I know?
  And what is the best place to find friendly, step-by-step user guide on what anyone, I need to know?
  
  Maybe someone could recommend a good book on the subject? Maybe one that has additional publication, should I decide I want to go in this new...
  
  Thanks in advance
  
  Mira
  

  One of the first steps of design Web is to have a basic understanding of the HTML language, there are some books you can buy or check at your local library. For the purchase, I would say the Adobe store or one of many other sites; This site has a few selections very good learning HTML and databases, this book is pretty good, HTML Sourcebook, I.S. Graham, Wiley and Sons - covers all aspects of HTML, CGI, forms, tables and Style Sheets etc... HTML Sourcebook With respect to the Web sites that cater to FREE online courses, discover the html goodies that they have an excellent choice for all levels from the beginner to the Pro. I hope this helps.

• After that upgrade to El Capitan about this Mac does not work"

  After the upgrade to El Capitan by clicking on about this Mac, nothing happens and by double clicking on System profiler I get the error message from the Application "System information" cannot be opened.  I ran disk utility, tried in safe mode and as a guest and all user are the same.

  It is a late 2008 MacBook.  It's on 10.5.8.  I did a clean install of 10.6.3 with upgrades to 10.6.8 to give birth to El Capitan.  According to me, that he was working at that time.  Then, I migrated the user of a backup image of the 10.5.8 account. Who could have when it stopped, but I'm not sure.

  I had two newspapers @ pastbin.com/Mca6LS4H

  Hello mrtrytofixit,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to rely on public services provides your Mac and I want to help you get things working again. With troubleshooting, you have already done, it seems that it is a systemic problem.

  From there, what I recommend is reinstall OS X El Capitan using OS X Recovery on your Mac. It should not remove or erasure of your data, but it is recommended that you make backup before you do incase of an emergency.

  These articles will guide you through the backup and reinstallation:
  Use Time Machine to back up or restore your Mac
  How to reinstall OS X

  If you have any questions or concerns, inform the community. We are all here to help.
  Best regards.

• Messages/questions about this mac

  I have a late 2008 macbook unibody. A few months ago I updated and it worked find. 8g memory on El Capitan. My wife has a macbook 2009 (white) and he has had some problems. It is currently running 10.5.8 (Leopard?). I decided that it would be a good idea to create a profile on my computer because it is higher and actually works. So, I took out his hard drive and used the migration assistant to move its data to a profile on my computer. Everything seemed to work very well and everything going on above.

  Now, I learned today that I can't use Messages. For some reason, I think he's trying to open its version which may have migrated from his computer. I don't know why he would do that and I can't understand how to solve. I can't remove it because it tells me that it is used by OS X and cannot be deleted. I've attached screenshots of the error I get. I have since deleted his user profile to try to remedy, but it did not help. I'm still stuck with all applications and files that came with the migration. I don't know how to remove one of these.

  There is another question. Since I migrated the data, I was no longer able to open "about this mac". Or from the top menu, or the finder by using system information. Really at a loss here.

  Any help would be appreciated.

  

  

  System profiler does not open on my iMac. Apple support communities

  OS X: about system information and System Profiler - Apple Support