Inspiron n4010 only one speaker works

Similar Questions

• Only one speaker works on the bottom of the phone

  All the documentation that comes with the Turbo 2 and online documentation I've seen before buying indicate that there are two audio ports on the bottom of the phone, one on each side of the Verizon logo. However, only the side right (while facing the phone) actually works. The left speaker does not work. Verizon, which did not, I called and they put someone in support of Motorola on the line. The motorcycle rep says absolutely the two speakers should work and my phone is defective. They suggested that I return it as a guarantee of Exchange. I'm happy to do, but before I did I stopped by a verizon store and checked four phones they had on display. All four phones had the same "defect". So is - can anyone clarify if both speakers work on any Turbo 2 phones?

  I was also wondering with all these mixed news, but there's a tear down video on YouTube which shows clearly there is only one speaker. I hear only on the bottom right, that nothing about ports to the left on mine.

• Only one speaker working in Lifechat lx-3000 headset

  Using the Lifechat lx-3000 headset Windows XP, sound only comes out of the right speaker. Microphone works very well. I checked the balance, changed the usb connectors, reloaded drivers and checked the other solutions of this forum answers to just about any other problem with this headset and nothing has helped.

  Hello CShep,

  Thank you for your message.  Have you checked your helmet on another device to make sure that one side of the headphones is not a blown speaker?  Please let us know so that we can better help you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• UZ2315H - only one speaker works (?)

  Hello

  Just got my new monitor, UZ2315H.
  I connected to my desktop via HDMI.
  I also have it connected via USB in order to activate the speakers too.

  The problem is that I hear the sound of a speaker only (lower left).
  As the monitor has 2 speakers, I'm guessing that the other is bottom right. But I can't hear any sound from it. The sound only comes from lower left.

  What can I do? Should I send the monitor like DOA? Or I missed something?

  Thanks in advance.

  Hello again.

  Just to update and 'close' this topic, I thought that perhaps the HDMI cable has done, so I tried to use another HDMI cable, but, once again, the same result. Then I tried with another. Once again the same thing.
  Finally, I tried another Uncable (thank God I had a spare part) and then it worked. Now, I can hear two speakers.

  PS: I used a HDMI cable with an angle, because the original "pushes" the cable a little outside because of a piece of thick there, well can't explain it, it looks something like this:

  

  Thanks for your help anyway.

  :)

• Only one speaker works on the helmet

  This isn't a problem with the headphones, I tried several pairs, each of them works fine on other devices.  Is not a problem with the left-right balance of the speakers I checked this setting.  Curiously, the built-in speakers work fine.

  So good with these controls out of the way, I use a 2 week old Acer Aspire Timeline AS3810T running 64-bit edition Windows 7 Home premium.  A few days ago all of a sudden, I noticed that when you use a helmet only the left speaker gives sound.  It's as if there is no such thing as the right speaker.  I emailled Acer Tech support but they did not, and it's been 4 days.  The laptop has a HDMI output and a black audio jack with an icon of headphones and SPDIF letters.

  I also tried to uninstall the audio thingys in the Device Manager and downloaded the latest drivers, all to nothing does not.

  I just had a hunch that completely wipe the hard drive and reinstall windows would solve the problem, as it is difficult to imagine that the audio jack just died (jiggling around does not work).  So before I do and before I do a warranty request, I thought that someone would be able to show me how to check the relevant parameters, etc. without completely obliterate the current installation of windows.

  Hello

  have a. you been able to use the headset without any problem before?
  b. any recent hardware/software changes made on your computer?

  Try to activate microphone amp and check if the problem persists.

  1 right click on the speaker icon on the taskbar (lower right corner of the screen).
  2. Select the recording devices.
  3. Select the headset and click the properties button.
  4. in the pop-up window, click the custom tab.
  5. place a checkmark for amp Microphone and click on the OK button.

  If you are still having the same problem then, it must be a problem with taking that your headset is connected. So check with the manufacturer for him.

  Let us know if it works.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• that only one speaker works

  I am running windows XP. When I use windows media player sound out only a single speaker. Help!

  Hi ecg1964,

  · What is the number and the model of the speaker?

  · What version of windows media player you have installed on your computer?

  · Do you remember recent changes made to your computer before the show?

  · This only happens with Windows media player application?

  1. try to connect the speakers on another computer and check the results.

  2. follow the steps in the link below and check off the results: solving Audio problems in Windows:http://support.microsoft.com/gp/troubleshoot_audio_windows

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Only one speaker (for both) to work (after checking the FAQ)

  Hello

  I have an inspiron N5110 R15 3 years now, a few days ago one of the speakers stopped working. When I do a test of stereo sound, the left speaker (the one that always works) its left AND RIGHT sample tones. so I figure this is on some kind of maybe Mono?

  -When I plug the headphones I have the sound on both sides.

  So far, I have tried

  1 reset

  2 tried update driver if the Device Manager

  3. turn on device

  4A ran the audio problems (win 7, 64 bits)

  5. looked around the frequently asked questions here

  * I do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops. you are the experts, so I'll gladly do if you say.

  current driver is manufactor (IDT high definition...)

  Thank you in advance.

  Another test, that you can run is ePSA Audio Quick Check. Note that not all ePSA and ePSA models do not all control by Audio fast. If you do not then just fail the color bar test as described in the FAQ. If you hear tones in the two speakers at the trials then the speaker itself is good and another part is the cause of the problem, probably the socket for headphones, since you know the audio working properly up to this day.

  If you hear only tones in one speaker and the other speaker is confirmed then failing or has a bad connection.

  The final test you can do is to perform a System Recovery. If it's a software problem then recovery will fix the problem and if it is material, then it will be no and hardware will be confirmed as the source of the problem. But no point in doing so, if only one speaker is heard in the previous test...

  icecoldnine

  I do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops.

  You need not to do because you tried the native driver which served the same purpose. A simple re-installation of the audio driver (no download) is that your settings will be lost - in other words, the default configuration is restored thus exclude a problem of configuration, such as defined as mono in the sound properties.

  

  If you want to check this, open the playback of the sound properties, right click on the speaker/headphones, select Properties, click the levels tab, click the Balance button. It does not matter how cursors are defined so that they are both the same level of the dB.

  Download a new copy of the pilot aims to eliminate corruption from the existing driver. Sometimes, they stop everything works correctly.

• Several areas of reversal on a slide, only one works

  Hi all

  Player, is the first time for a long time. I have looked through all the forums and cannot find a solution for this problem.

  I have a slide with six legends of overview, arranged in two rows of three. Under each bearing legend is a regular legend that contains a statement; the Viewer is for the mouse on the statement and the hood will pop up a legend saying that the statement is true or false. After ten seconds, a button appears and pauses for the slide, and the viewer can click on the button to go to the next slide.

  When I saw the project, only the upper left corner of the box works now as expected. Then after ten seconds, the button appears, and five others begin to work very well. One weird thing is that during this first ten seconds, the cursor of the mouse always changes to an icon of the hand on all the bearings, so she recognizes that they are there, but nothing appears.

  The question seems to have to do with the key, but I tried to adjust his timing, his order into piles of layer, I tried to remove the button, I tried to copy all elements except the button to a new slide and I still get the same problem, and buttons start working properly at the ten second mark regardless of where the button is. All rollover captions and rollover areas have identical properties that I can tell. Overview areas are at the top of the layer stack and are not overlap. Top left (on the scene) is still the only one that works correctly, regardless of how I place in the layer stack.

  I tried everything I can think of. Now I humbly turn to you. Photo of my calendar below. Thanks in advance!

  -JB

  

  Ok.  I solved the problem by replacing just all legend of flipping objects.  Something about their needs has been corrupted.

• BlackBerry Q10 speaker/Mic stopped working - I'm the only one? Help!

  Hello

  A few weeks ago the mic on "speaker phone mode" on my phone stopped working.

  Phone works very well in phone mode, but to try the speaker - a total nogo button!

  WTF and everything!

  For me, this is one of the most important features on the phone!

   

  Then I realized the microphone for recording videos has also disappeared.
  

  When I try to use it on the phone calls, looks to an endless loop.

  Here's what I've done so far:

  1 deleted all apps purchased for nothing.

  2. rebooted, restarted, pulled battery... nothing.

  3 reset the device... Yes, completely done... nothing.

  4. has tried to put in headphones, removing the headphones (seen this somewhere)... nothing.

  Someone at - it this?

  Am I the only one?

  Great thanks - love my Q10, but need the speaker (and return buttons!)

  Go to the App help click test and see if you can test the microphone. Of it fail the test, you will need to contact your carrier for warranty repair.

• One speaker of EliteBook 8470p works

  Hi all

  I use a 8470p EliteBook and noticed that only integrated speakers work.

  I checked all the settings, levels, balance, done all kinds of tests and updated audio driver to the latest version.

  The result is that I still hear all the sounds of the left speaker only. When testing, I hear channels left and right from the same place, as if it was Mono. Helmet works normally.

  The plausible explanation only I could find, in addition to a fault, is since 2008 and for a completely different model: available to stakeholders had changed at the time and two speakers were nested in one of the slots of the speaker. However, it has been more than five years, and I think that it is not applicable.

  If anyone knows the question or disassembled this machine, please let me know what you think.

  Thank you!

  Hi Buzev

  I did a check on my p 8470 after seeing this post.

  My machine has 2 speakers, but they're right next to each other on the left side of the machine.  If I put hy head close enough, I can say that his slightly in front of the other, but both having one side certainly defeated the purpose of having a stereo sound!

  It seems that yours is laid out the same way.

  See you soon

  Andrew

• Webcam does not work in my Inspiron N4010

  The integrated webcam does not work in my Inspiron N4010. In Device Manager it does not - there is no category for imaging devices. The central webcam and Skype (that I uninstalled and reinstalled) indicate no webcam and request that one be plugged. Please notify.

  If you are good with a screwdriver you can probably fix it really fast. First turn off the laptop, then remove the Panel before (trim sreen) to expose the webcam and unplug carefully, not to break the wiring of the plug. Finally, turn the computer on the bezel even reverse, but expect that the computer fully boots up... now plug it back (with the computer), now to see if your webcam is now detected and installed as a "Device-Image" in Device Manager. If so, you good to go!

• Hi, there I have a hp RTL8723E laptop. It works perfectly fine. but there is only one problem inside

  Hello
  I have a hp RTL8723E laptop. It works perfectly fine. but there is only one problem in it. When I'm online I want to listen to background music, he doesn't play songs such that she should songs begin to freeze, but when im offline songs play correctly
  my laptop spec.
  1.40 ghz processor 4 GB ram

  Hello

  HP RTL8723E laptop

  You have posted a number of wireless card in the printer section.

  Maybe try again in notebooks with a model number?

• BBM BBM works only one-way

  Hello

  Since yesterday (2016-01-26) the following error portfolio:

  Messages sent from a BlackBerry device are received, but the messages that I send to a BlackBerry smartphone get only the check box, but no D or R marking.

  I use BBM on an Android phone, with the most recent version 2.11.0.18

  Try to solve the problem I did the following steps - but none of them changed something in the behaviour:

  . Restart of BBM

  . Restaring the phone

  . Reinstalling BBM

  . Try BBM on two other Android devices

  . Try to create a group - for this my invitation was received by the BlackBerry device, but cannot be accepted

  . You try to join a group - I received the invitation and I could accept it, but the group does not appear

  . Try a cat prlvate

  . Try another account

  The only thing that works is the exchange between two Android devices.

  Another curiosity: yesterday and today, that one message has send - only!

  I have some other ideas that I could try to solve the problem - did someone knows more? Is there a network BlackBerry problem?

  Today, I was able to exchange a few messages again, it seams to work again.

  Without changing anything.

• 2 PCs to a printer with Staples USB 2: 1 splitter - work light only one?

  I have two computers to a printer with Staples USB 2: 1 splitter but only one of the LEDs are lit and only that one works.  When I reverse the son again once the same side on works.  Is this new defective product or only light #1 and you must constantly spend to print from alternation of computers?  Thank you very much ~ is probably going to return the product because it does not work otherwise.

  Hello

  I got it now... did not know there was an installation CD inside packing... happy that I kept the package because I thought I was going to come back he ~ works great!

  Thank you

• I'm a new mac user. I transferred files from my pc to mac successfully. They were in the 'documents '. Today, I opened the mac and there is only one file in "documents" - I had worked on.  Where are the others? Help please.

  I'm a new mac user. Successfully transferred all of the files from my PC to MacBook pro. All of this is to be seen in the documents. Opened now MacBook and only one file to be seen in 'documents. Where can I find the others. Convinced they are there somewhere, help please.

  The Mac is in itself a system multi-user, whether you choose to create a user or a large number.

  All users you already created can be seen in

  System Preferences > users & groups

  The files for each user are kept separated, protected of the subdirectories of the Directory/Users:

  / Users

  your User_short_name folder

  file user_short_name to your spouse

  record your child User_short_name

  record your dog user_short_name