Want to office 750-116: Startup control device

Similar Questions

• want to office 750-124: hang a screen on a desk like 750-124 don't see any vga or dvi connection?

  hang a screen on a desk like 750-124 don't see any vga or dvi connection?

  Gbober

  Hello;
  
  Let me welcome you on the HP forums!
  
  The terms of reference I could find for your office indicates that there are two HDMI ports on the back.

  Those who are used to connect a monitor.

  If your monitor doesn't have any HDMI input, then you will need to find an HDMI-DVI or an HDMI adapter / VGA to connect the cable from the monitor to the computer.

  Good luck

• Want to office 750-055xt: FireWire-HP

  After the purchase of my HP I noticed that I don't have an i.LINK FireWire IEEE 1394 cable port to transfer my Sony DCR-TRV240 camcorder movies. I understand that I need to buy and install a special card in the x 16 or X 1 PCIe expansion.
  My questions are:
  What is the best, x 1 or x 16?
  Can I low profile?
  Do I need to have a connect the power supply to it?
  Will I need additional software?
  
  Thanks in advance for your help. I should have studied this before buying.
  
  Bill

  Bill, welcome to the forum.

  billcwilson wrote:
  After the purchase of my HP I noticed that I don't have an i.LINK FireWire IEEE 1394 cable port to transfer my Sony DCR-TRV240 camcorder movies. I understand that I need to buy and install a special card in the x 16 or X 1 PCIe expansion.

  My questions are:

  What is the best, x 1 or x 16?  I recommend PCIE x 1.  It's a little slower, but it leaves your PCIE x 16 slot open for a discrete video card.  You will probably want one if you game.
  Can I low profile?  Either we have to work.  Here is an example.  If you want more information you can contact the Technical Support of StarTech for suggestions or help.  They are very good.  I've used them several times.
  Do I need to have a connect the power supply to it?  Most of the Add on Firewire cards is a useless.
  Will I need additional software?  Normally, no.  However, if software is required it will be delivered with the card.
  
  Thanks in advance for your help. I should have studied this before buying.  You are welcome.
  
  Bill

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Envy 750-116: can anyone recommend an upgrade of the power supply for HP Envy 750-116?

  I have a HP Envy Office 750-116 and need to replace the power supply 300W with an upgrade to a more powerful.

  I was look at is CORSAIR CXM CX550M 550W 80 PLUS BRONZE or the EVGA SuperNOVA 650 G2 80 series. I have kniow that they are all two excellent PSU.

  My concern is with the connector that the 750-116 uses to the optical drive. Looks like the kind of connector you see go to a laptop, DVD player. (It of really small and is marked P5)  I have a spare part HP 460W PSU I could use, but it is not a connector that would work. So I hesitate to buy Corsair or the EVGA without knowing if I'll be able to plug into this weird DVD connector in the HP Envy.

  Someone out there has run into that and find an answer?

  Bill

  Optical drives are still a thing? Wow! Any ways OP. On these new machines. HP uses a slim with an owner drive

  Connector for it. You won't find it on the other PSU. You will have to abandon the drive if you replace the stock PSU.

• Too much consumer control devices in accordance with HID

  Hi, I was doing a variety of BSOD and one of the things I look at are peripheral and drivers double. I have a MS Wireless Laser Mouse 8000 and 7000 keyboard. I've listed 13 of the HID-compliant consumer control devices in Device Manager. I have uninstall all but two from the bottom up and the keyboard or the mouse always work. If I uninstall the last two, the keyboard and mouse is no longer working and I need to plug a USB Logitech mouse that gets loaded so I can shut down the PC. At startup, the mouse/KB works, but quickly an installation dialog box has just installed bluetooth mouse/KB. has this time I go and take a look what is installed (Device Manager) and there are 7 the HID-compliant consumer control devices installed. So when I push the button on the mouse to make the bluetooth connection, it must be connected but I can see that another feature of the HID-compliant consumer control is installed. Even with the keyboard. I ended up with 13 of them.

  I have all the updates and service pack 2. He said that there are no new drivers for the mouse/keyboard. I tried to use Norton Utilities to clean the registry. I wish I had written down all BSOD errors. The last was 0 x 19. I had IRQ not less or equal 0x0A. I got the error page BSOD in area non paged 0 x 50. Is there a program that detects driver problems or interprets the OS stops.

  Read the posts by spirit MVP in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have Iphone with SER. DN number * RY9. I want to know the number of hardware device.

  I have an Iphone 6 with number of ser: DN * RY9. I want to know the number of hardware device. Is - this samsung or other?

  Thank you

  < personal information under the direction of the host >

  Please, do not post your serial number i public forum na.

  There is no way outside of disassembly of the iPhone to see what kind of CPU, there is a, nor is it important. Both processors are made to the exact same specifications and perform exactly the same.

• Is there a way to manually move photos from my Mac to my iPad and iPhone?   I don't want to use photostream because I don't want to use my memory on my devices moble with my collection of photos together.

  Is there a way to manually move photos from my Mac to my iPad and iPhone?   I don't want to use photostream because I don't want to use my memory on my devices moble with my collection of photos together.

  With iTunes Sync Photo, you can copy the albums selected to your library of Photos of the iPhone or the iPad.

  See: Sync photos to your iPhone, iPad, and iPod touch in iTunes - Apple Support

  But this method is available, if you use not iCloud photo library on your mobile device.

• I want to use the expression editor control in a DLL VC ++ how?

  Hello

  as mentioned I want to use the expression editor control in my DLL written with VSC ++ 2005 MFC. But I came across some problems:

  If I simply add the ExpressionEdit control in the toolbar to my dialog box then the dialog box will appear not during execution. As soon as I remove the control from the dialog box appears.

  In the examples of TS is a called "TCL" (...) Instruments\TestStand national 4.1.1\Examples\Tcl\source\EditSubstep). It is programmed in C++ and uses the expression editor control.

  The original dll works fine, but as soon as I compile the editsubstep with my VS 2005 I get a runtime error (see image).

  What should I do to be able to use this control?

  Does anyone have an example of a job for me?

  Frank has soon

  Hi, I found the solution and now it works fine.

  I just had to enable support for OLE controls in my dll.

  Nevertheless, thanks for your help!

  BOOL CMyDLLApp:: InitInstance()

  {

  CWinApp:: InitInstance();

  AfxEnableControlContainer();  enable support for OLE controls

  Return TRUE;

  }

  Frank has soon

• The HID-compliant consumer control device

  I have 2 PCs both running window XP. Recently, every time a PC is turned on, it always pup - up window and asking for "a new HID-compliant consumer control device" is and ask you to install the device driver.
  However, I can't find the driver - when I have the PC auto search the drive and tried to install it, it has always failed to do so and next time, when the PC is turned on, the same situation happened. Isn't it very annoying. correct driver. Pls help-

  1. What is consistent with the above HID consumer control device?-my PC another has no such feature compliant consumer control, when I checked the "Human Interface Device/Hardware Manager.
  2. how to solve this annoying problem...

  Thanks for your help.

  Hi Benshu,

  ·         Did you do changes on the computer before the show?

  I suggest you to disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Also go through the event viewer crash logs and check what is the application and the module that fails to load. If you find error messages after return the exact error message so that we can help you better.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• I do not understand this step "we can assume any MAC address we want by finding the key that controls the NIC we want to change.

  Hello
  anyone ever did in Winxp with success. I do not understand this step

  «We can assume that any MAC address, we want by finding the key that controls the NIC we want change, put in a value chain called "NetworkAddress" and affecting the MAC address we want to use formatted as a hexadecimal 12-digit number (example: 000000000001).»

  It is a part of the "Windows 2000/XP/Vista: The Hard Way.

  from this link
  http://www.irongeek.com/i.php?page=security/changemac

  Concerning

  original title: change MAC address

  Hello

  I suggest to refer to this thread and follow the steps in this thread and check if that helps:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/697bf48c-A226-4315-8875-2bbeddf16db2

  The steps in this link are for Windows 7 and they are valid for Windows XP.

  It will be useful.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• media control devices... (mci) midi sequencer... Properties... (No devices)... !

  media control devices... (mci) midi sequencer... Properties... (No devices)... !

  XP Home... SP3... Re-installed last Realtek audio pack (sp26552.exe)

  No hardware conflict, devices activated, control of the Volume number, number Sytem sounds, etc... !

  His Manager, speaker Test works Fine... ! O.o

  Any help would be greatly appreciated... !

  ;-)

  No idea of what has past... Blue screened...
  reboot... and everything works as should be OO... Gremlins... !

• I want to open. PSD in android device, is it possible? If this isn't the case, at least to look at an object, editing would be a great help.

  I want to open. PSD in android device, is it possible? If this isn't the case, at least to look at an object, editing would be a great help.

  Have a look here:

  http://appcrawlr.com/Android-apps/best-apps-PSD-files

• Satellite Pro U200-10I - how to disable the system at startup control upward?

  : x Hi,.

  I have Toshiba Satellite Pro U200-10I and I want to disable the control system, as it is a long time to start machine. Is there a way to Devil who?

  Nedd your help! : D

  Hello

  Just checking the system do you mean exactly?
  Is this based on Windows or BIOS based?

  If you mean the ScanDisk in Windows startup you can disable it in the registry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager
  Change the BootExecute entry to: autocheck autochk *.

  After that restart the ScanDisk is disabled and doesn't appear at Windows startup.

• Error on startup: "control Catalyst Centeris ignored supported by the version of your current graphics card driver.

  I downloaded this update - ATI Technologies Inc. - Display - ATI Radeon HD 3200 graphics. After the installation, I get this dialog at startup "the Catalyst Control Centeris not taken in charge by the version of the driver for your compatible graphics card. Please update the ATI graphics driver or enable your ATI card using the display manager. "I looked for the display manager but can't find it. What should I do?

  In the devices you can try to select your ATI device, properties, back the driver.

  If it does not, see my post above for information on where to get the driver

  Configure MSUpdate for Important / critical updates only and ignore the optional updates