Want to run other than safe mode

My computer will not get past the taskbar during startup in normal mode (and it takes FOREVER to do).  Have tried the restore without success and some of the tasks in help.  Still can only use the laptop in safe mode.

Shari

Try using MSConfig to solve your problem. The link below is for XP, but it applies as well to Vista

http://support.Microsoft.com/kb/310560

Tags: Windows

Similar Questions

  • XP SP3 cannot start other than safe mode.

    I tried msconfig services deselection etc. have now no system restore points. McAfee re-installed. I can't check the updates of W.

    Hello gsqSI,

    I see that you have deselected services in MSCONFIG.

    I would like to disable all non-Microsoft services, but also any items from MSCONFIG startup.

    Let us know if that helps.

    Best regards

    Matthew_Ha

  • need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

    need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

    If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

    It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

    OP: Install problems Windows

    I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

    Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

    1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

    I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

    I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

  • Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

    Please help with the problem of itunes

    Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

    Hello

    • What version of Windows are you using?
    • This happens with this program only?
    • What were the changes made before the problem occurred?
    You can check this link:
    Problems installing and uninstalling programs on Windows computers

  • will not let me delete Java and other programs. Say I am running Windows in safe mode?

    Can not remove some programs

    Hello

    ·        Why are you starting in safe mode?

    ·        Do you see the safemode, written on all four sides of the screen?

    If you see you're starts in safe mode so you can't uninstall programs in safe mode since the Windows service install will not work in safe mode.

    Windows service install is responsible for installing and uninstalling a program on the system.

    I suggest to start the desktop normally and then check if you are able to uninstall the program on the system.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

    Crazy became Windows Installer

    have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

    Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

    Hi, Honorine,.

    Follow the steps listed in the following article:

    Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

    See also:

    Problems installing and uninstalling programs on Windows computers

  • Videos like AOL, start to play, then the video blanks out and the audio continues. If I run Firefox in 'Safe' Mode, it works. Disabling plug-ins does not work

    TED talks, videos, AOL and others will start with a flash of the video, then off. The audio continues. I deleted the plugins flash and quicktime - no luck. I restarted Firefox in safe mode and it works fine. I then rebooted and disabled all the plugins - no luck. Internet Explorer works fine.
    Any ideas?

    One of the characteristics of Safe Mode is that it disables use of Firefox hardware acceleration of graphics. This method works around incompatibilities with some graphics driver software.

    the button Firefox orange (or the Tools menu) > Options > advanced

    In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

    It takes effect after you quit and then restart Firefox.

  • Firefox crashes at startup, can not run except in safe mode

    When I try to open Firefox, it crashes immediately. I can only run in safe mode. I have not installed just recently I can think that it would affect. Here's the latest crash report 5 IDs:

    bp-a0f9cb98-1e79-4ade-9313-4b8f32130320
bp-ce2412c3-4611-4586-a9af-4bce62130320
bp-fab147c3-5ee3-46a5-8419-6f25e2130320
bp-8661beba-9e1e-4430-a812-ee0092130320
bp-4df6de63-61c8-4305-bd96-1a9272130320

    Try disabling hardware acceleration in Firefox.

  • Screen won't turn on and can run Vista in safe mode on Satellite P series

    Last night, I was working on a slide show with windows movie maker in Vista. I had trouble getting the software to recognize my video files for my camcorder, so I suggested that I try to download codec so that he could play my files... I don't know what I was doing, but he gave a shot.

    Even if the codec didn't work even after the download, I was still able to run my computer normally. This morning I woke up and continued to work on my slide show but my computer wouldn't play my slideshow. All he would do was play music and audio files... Everything seems to be working so I decided to restart it.

    My computer will restart, but now my screen is black. It remains 'functions' I see change different colors of black and gray because it is set to zero... and I can hear all the audio that comes with reset, but I can't get my laptop screen to work.

    I plugged my desktop monitor to my laptop to see if the monitor would work like that and it did for about 30 seconds, then turned off Black too. I then rebooted and press F8 and ran in safe mode with my always-connected desktop monitor. I am able to run in safe mode but not normally reboot. I think I downloaded some viruses with this codec.

    I decided to get the desktop monitor and press F8 just hoping the screen would show up on my laptop... but it still doesn't work. It stays black.

    Now, I'm running in network mode so I can know what to do next. I tried a restore of the system in safe mode, but I think that it only deleted windows updates and not something else. I can't find my toshiba recovery CD because we moved a month ago and it's somewhere in a box...

    So here I am. I work constantly on a slide show for Christmas and can't play or it end before my laptop works again. I also tried a during restart System Restore but I don't know my password of administrator and I tried a couple that I thought that I would have used during installation, but they were not good and so now he me off to run as administrator.

    Can someone tell me what I can do? Thank you very much

    I'm a newbie here, but have you tried...

    1. press F8 (press on and hold, or press repeatedly) while Vista boots, and then select Safe Mode. This should automatically open the account administrator (no password needed) and you can then reset your existing account to the administrator.

    2. simply delete all user accounts permits (including the one you are logged as) without forgetting to let the disabled administrator account. And then disconnect.

    3. use Offline NT Password & Registry Editor to unlock the administrator account or promote another user to the local Administrators group to regain access to your locked Windows Vista PC.

    4. also Vista has a hidden superuser account.

    Just my 2 cents.

    Post edited by: Mddlrthr2

  • Some applications run only in 'safe mode' - how can I find out what is blocking them in "normal"?

    Hello
    Several programs have ceased to work in 'normal' start mode, although they do not work in "safe" mode
    It comes to IE9, Windows Mail, Google Earth, Spotify.
    Flash does not work (although deleted and reinstalled).
    Firefox (or Chrome) crashes when you try to download. I couldn't download DDS for example, except in safe mode.
    My previous anti-virus - McAfee - protection would not work, and I am now using Microsoft Security Essentials.
    I've disabled the start up programs and checked for any unwanted programs on the system.
    I ran Malwarebytes.
    My HiJackThis file has been analyzed by hjt.networktechs.com and can be found at:
    http://HJT.networkte...php?log=938981

    So... I was wondering if anyone can tell what to do next.
    Thank you
    Them

    What happens when you try to open the programs?

    Try to create a new user account and test if they are working:
    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  • my computer runs only on 'safe mode' when I try to run regularly. It just goes to a blank screen

    idk what to do all I can do is power the computer on safe mode. its supossed to go to the user where I connect to the windows vista computer, but he doesn't. He's on the safe mode.

    some 1 help me please idk what 2 do... D:

    Try the following steps:

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Firefox crashes when running. Resettlement, safe mode and profile all make them appear "Firefox has stopped working" until it never opens a window

    I tried all the solutions on other items. I uninstalled, including profile information, then deleted all the files of Mozilla, rebooted, then re-installed and got exactly the same problem.

    I am running Vista 64 and the latest Firefox.
    I have run different virus scans and tried to uninstall all the Flash stuff.
    IE and Chrome, that both work, but really slow compared to how fast Firefox ran (although it worked), so I would like to resume.

    I have no information of actual error, but what I do is below...

    Signature of the problem:

     Problem Event Name:	APPCRASH
 Application Name:	firefox.exe
 Application Version:	24.0.0.5001
 Application Timestamp:	522fd29f
 Fault Module Name:	ntdll.dll
 Fault Module Version:	6.0.6002.18881
 Fault Module Timestamp:	51da3e00
 Exception Code:	c0000005
 Exception Offset:	0002abe4
 OS Version:	6.0.6002.2.2.0.256.6
 Locale ID:	2057
 Additional Information 1:	3f21
 Additional Information 2:	b21eec1522c4859456611373b2bc31d4
 Additional Information 3:	c437
 Additional Information 4:	4fcda050134e1df0038b45ec0bc068b3

    May also make a malware with some malware check, analysis of programs on the Windows computer.

    Please scan with all programs, because each program detects a different malicious program.

    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • How to disable the Macros Sidewinder X 4 (run even in safe mode and after reboot with keyboard not hung)

    Hello-

    I am now locked out of my pc because macros keyboard fill in my password.

    This happens in normal mode or without danger and without connected keyboard or pc remote access (rd or logmein and unplugged keyboard)

    Windows 7 Ultimate.

    I contacted support and they said that Windows 7 is supported legacy and would be a burden. They also mentioned that they could remote to my PC.  I would like to see that when I don't have access to give them access.

    Windows 7 end of mainstream support January 13, 2015<------This don't="" mean="" legacy="" to="">

    I have some ideas on how to fix it myself when I had the chance, I just want to see what other peoples thoughts are.

    Thank you!!

    Hi Phillips,

    Thanks for posting your question in the Microsoft Community forums.

    Let me try and help you with the problem.

    1. do you get an error message when you press ENTER after filling in the password box?

    2 did you face this problem after you assign the macro?

    3 have you tried to use a different keyboard?

    4. have you ever tried to use the on-screen keyboard?

    Check if are able to use the on screen keyboard and be able to use the remove the filled automatically password and enter the password.

    From the login screen, click on and choose the option Type without the keyboard (on-screen keyboard). Click OK.

    If this does not help, go to the Windows recovery environment and perform a system restore and check the number.

    http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

    In addition, see the article:

    http://www.Microsoft.com/hardware/en-us/help/support/how-to/keyboard/macros

    Let us know the result. If you have any other questions, we will be happy to help you.

  • Why any material I install using a USB port cause my computer access to the screen asking how I want my computer restarts in safe mode, safe mode with network etc.

    I USE WINDOWS XP PROFESSIONAL

    Hello

    1. don't you make changes to the computer until the problem occurred?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try running the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2: Try also to update the latest drivers for your USB using the link below.

    How to manage devices in Windows XP:

    http://support.Microsoft.com/kb/283658

    Method 3:

    Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

    Hope this information is useful.

Maybe you are looking for