WAP121 Assembly

Similar Questions

• DesignJet 130: what should look like a NEW Assembly of ink for DesignJet 130 tube to

  I ordered a new Assembly of tube of ink for DesignJet 130 from an online source. The item is marked refurbished. Frankly, it seems not yet to have been refurbushied but just pulled an old printer (but that didn't matter that I was expecting again), but it did lead me to ask a slightly silly question.

  The tubes in a new assembly have preloaded ink in them? I guess not, but when I locate a set of 'new' I don't want to jump to a false conclusion so filled beforehand with ink. I guess they must be clean, dry, seems to have never been filled, and not overflow but I thought I would check.

  I'll get my money back and try again. I guess there are some spare parts new surplus stock for this printer floating around. I was wrong in my assumption?

  Concerning

  New tubes of ink are empty, I installed came with setup printheads.
  
  If my post is solved your problem and click the accepted as button solution under him.
  
  In order to thank a Tech for a post click the thumbs up button under the post.
  
  You can even click on the two keys...

• Toolbox graphic and assembly language of Saturn on the HP 50 g

  Hello.

  It's posibble to use instructions of the graphic Toolbox in Saturn on the HP 50 g Assembly language programs?

  If possible, give an example of the program which draws the filled area.

  Hello

  Yes, it is, it was designed for this...

  Now, you realize that I created this toolbox over 14 years ago! and I don't have touch Saturn ML for at least 10 years! It's to help you a bit hard...

  In any case, here's your program

  "SAVE".
  D0 = 806 5 A = DAT0. A D0 = A / / get the pointer on the screen of the battery. I remembered never this address without having to watch the doc!
  D = C.A LC 00020 / / Y2
  LC    10 B=C.A                           // Y1
  THE LC 30 00005 / / X 2, X 1
  GOSBVL 26B 34 / / Black Box
  LOADRPL / / return
  @"

  You should be able to download the library come Point to http://www.hpcalc.org/hp49/programming/entries/, called Table of Entry Point that allows to refer to points of entry by name...

  You could spend the first, you cannot schedule it in ML, but the language of the user is pretty darn prety fast (maybe even faster than on the original 49 ML!)

  Here, you can make a black box using (10, 10, 30, 30) RECT. :-) much simpler!

  Cyrille

• HP 15-r014tx Notebook PC: computer hp laptop 15 LCD Back Cover Case Assembly

  I have HP 15-r014tx Notebook PC. My laptopbroken screen LCD NOT only his hood back. I want to buy Moose Back Cover Assembly from my laptop Case. I want to know where I can buy it online (pefferable) or offline. I live in India. I attach an Image also what part I want to buy. I also vist HP Service center and they told me that I have to change the LCD what's not broken they me charge 10,000 (INR) or US $150. Please help me as soon as possible

  

  Hello
  
  Please see page 21 of your manual: http://h10032.www1.hp.com/ctg/Manual/c04409502
  
  Search the HP part number in Google, you will be able to source it online if you're lucky or through HP part store India.
  
  Yours is a non-touchscreen model.
  
  http://support.HP.com/us-en/product/HP-15-notebook-PC-series/6875200/model/7132770/document/c04337700/
  
  Concerning
  
  Visruth

• How to assemble videos

  I have a bunch of some second videos that I would like to assemble, but I can't understand how in the new photos of OS x (OS X 10.11.2)

  Use a like iMovie video editor - Photos can cut the movies but are really a photo manager - not a video editor

  LN

• OfficeJet premium 6700: ADF Assembly

  I jumped the cover of the automatic document feeder and the entire assembly to clear a jam, and it does not come off back down into place... What is the thing...?

  Hi @beckylousiana.

  Welcome to the Forums of HP's Support. It is not really a thing for her. I find it works better if you lower the Assembly first, then the cover.

  Nothing is mentioned in the standard doc paper jam.

  Cannot find a video for the 6700 either. This ADF printers appears to be very similar. https://www.YouTube.com/watch?v=5xi14x2W-Yu

  I hope this helps. If so, Great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Withdrawal of the Assembly T440p Base cover - difficulties

  I have a T440p and it was necessary to remove all of the basis of coverage (black bottom under the cover). It's the t440p, which is different from T440 and T440s and not just cover with two screws which exposes the RAM fan, HD.

  After the HMM I have removed the battery, the front door and the whole keyboard bezel but cannot get off the base of the cover assembly. I removed the speaker wire and removed the screws R.

  Half of the Assembly is loose but in the middle where the dock connector and the battery power connector are located is all really well adjusted. The corner before where the hard drive is, is also very comfortable. I believe that if I pull everything more difficult, I que si je tire tout plus difficile, j' ai have will break something.

  I also watched the video on the website lenovo than google on this subject, but still not go.

  The HMM does not give many details after removing the connection caps and the screws R & C.

  Guides, videos, any other tips?

  Thanks, I found two screws on the side of the top that did the trick.

• Unable to get copy of targeting DAQmx.dll 4.5 / / the type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced.

  I inherited a software project that uses the NationalInstruments.DAQmx.dll library. I currently have the 13.0.40 32-bit version of the library. I rewrite the 64 bit .NET 4.5 and have found problems when you use the 13.0.40 version. Namely the two errors below

  Error    1    type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...
  
  Error    2    type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...

  Research mistakes online, I think that the problem is that my current DAQmx.dll is the .NET 4.0 framework and my new project target .NET 4.5.

  I went on the Web site of NOR and downloaded the NI DAQmx 15.1 "Downloader" (found here http://www.ni.com/download/ni-daqmx-15.1/5617/en/). This executable, once executed, then downloads ~1.7GB compressed files, once unpacked there are a large number of software and current documentation. After speaking with an engineer application OR on the phone he asked me to launch the NI DAQmx setup in the top level of the unpacked files folder. He then installed what I would call the Suite OR software... (Front flip, after I did an uninstall, the uninstall program me notified that I'm removing 224 pieces of software.) So why I call it the Suite OR).

  After installation, I was tasked to search for a similar folder installation directory to MStudio / / DAQmx / / DotNET / / assemblies / / current for the new version of the DAQmx.dll but only found dll starting with NationalInstruments.Common and anything ending with DAQmx. I also did a search on the full installation for the dll directory and found no NationalInstruments.DAQmx.dll. I decided to try the . Common.dll suggests that the naming convention may had changed, nothing helps.

  (Just some extra info) Finally, I went to the machine that has the old version of the Suite OR on it (I develop on a separate computer from the one using my instrument NOR) and looked under the same folder I mentioned above. Under this folder I locate a NationalInstrument.DAQmx.dll if this is the one I currently use. I also find a 64-bit version of the 13.0.40 dll, which is nice, but still has the same problems as the 32-bit version.

  So I guess my questions are now

  • Do I have reason to think that I need a newer dll? The one with the XX naming convention. XX.45 (15.1.45, I hope)?
  
  
  • If so, a DAQmx.dll who target 4.5 is of NEITHER?
  
  
  • If it does not exist, where can I find it? ...

  Well, I think I have mislead you again NYC. It seems that my problem has not been resolved. I tried all the libraries for each version, Measurement Studio from 2010 to 2013.

  The folder structure I have is as follows.

  \MeasurementStudioVS2010\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll
  \MeasurementStudioVS2010\\DotNET\\Assemblies\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)-15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2013\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.ComponentModel.dll

  Obvious all directories not marked 64 bits fail because they are not 64-bit. Directories marked 15.1.40.61 do not work gives me the original error. because they target DotNET 4.0. Under the VS2013 directories are not NationalInstruments.DAQmx.ComponentModel.dll only NationalInstruments.DAQmx.dll. Directories marked with 15.1.45.61 highlighted give the same error, namely

  Error 1 the type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version =15.0.40. 49154...

  Which I guess means that the name of the 15.1.45 directory does not coincide with the 15.0.40dll version. Am I misunderstanding this error, or am I wrong that the dll under 15.1.45 are not what they are labeled as?

  For reference, here are two snippits of code I'm trying to do work.

  using (NationalInstruments.DAQmx.Task analogWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AO, PhysicalChannelAccess.External);
  
      analogWriteTask.AOChannels.CreateVoltageChannel (channels [1], "aoChannel", MIN_VOLTAGE_OUT_THEORETICAL, MAX_VOLTAGE_OUT, AOVoltageUnits.Volts);
  
      AnalogSingleChannelWriter writer = new AnalogSingleChannelWriter (analogWriteTask.Stream);
  
      writer. WriteSingleSample (commandValue, true);
  
  }

  
  

  using (NationalInstruments.DAQmx.Task digitalWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.DOPort, PhysicalChannelAccess.External);
  
      digitalWriteTask.DOChannels.CreateChannel (channels [1], "port1", ChannelLineGrouping.OneChannelForAllLines);
  
      DigitalSingleChannelWriter writer = new DigitalSingleChannelWriter (digitalWriteTask.Stream);
  
      writer. WriteSingleSampleMultiLine (commandValue, true);
  
  }

  EDIT: So the real problem is that I have not included NationalInstruments.DAQmx.Common.dll in my project.

• . "I came with an InvalidOperationException: the form doesn't start, load t. ' error is: mixed mode assembly is built against the version of the v20.50727 and cannot be loaded in the 4.0 runtime without additional configuration information.

  Dear Sir.

  If you could please tell me where these options are specified and what additional information is required, I would greatly appreciate your good advice.

  Thank you kindly.

  I use VB2010 and Windows 10

  Hi jeffreykap123,

  Looks like you are using an earlier version of the .NET Framework in your project code while the project is configured to use the 4.0 Framework. I recommend you take a look at the following articles from Microsoft about a similar behavior. They should resolve this error message.

  https://blogs.msdn.Microsoft.com/jomo_fisher/2009/11/17/f-scripting-NET-4-0-and-mixed-mode-Assemblie...
  https://msdn.Microsoft.com/en-us/library/bbx34a2h.aspx

• Missing assemblies for example: GettingStarted.2008 (ModularInstruments)

  I am trying to run examples of 'ScopeWithUI' in DotNET/examples.  These require NationalInstruments.ModularInstrument.Common, NationalInstruments.ModularInstrument... ModularInstrumentsSystem and NationalInstruments.ModularInstrument.Scope.

  I have not found a message in the forums that corresponds to this question.

  Help.

  Dick

  Hi Dick,

  To be able to run the example referenced, you must install the driver compatible with all hardware AND-SCOPE OR SCOPE. Installation of the driver will ensure that the appropriate assemblies located in the Global Assembly Cache. I am including the link to the page of support here, and you can access the driver via the section drivers and updates.

• lack manifest Assembly .dll to import

  Hello Experts!

  I'm trying to import a .dll file that I created using visual studio 2010 sp1 (with c ++) in labview. (let's say the basic example of great described here):

  Walkthrough: creating and using a dynamic library (C++)

  Everything works fine when I'm doing things in visual studio, I'm even able to import the .dll file in .net applications. However, when I try to import this .dll in LabView, I get this error:

  System.BadImageFormatException:

  Could not load file or assembly 'C:\...\yourFile.dll' or one of its dependencies.

  the module should contain an assembly manifest. (Pls see attached screenshot).

  I know that the right of the bat that I need to check my visual studio settings. I did so, I followed the steps below in discussions with care and made sure that the manifest is embedded in the .dll file.

  http://StackOverflow.com/questions/12853502/manifest-for-my-own-native-DLL

  http://msdn.Microsoft.com/en-us/library/ms235229%28V=vs.100%29.aspx

  and here which explains how to integrate it into a process of post: http://msdn.microsoft.com/en-us/library/ms235591.aspx

  http://msdn.Microsoft.com/en-us/library/aa375649%28V=vs.85%29.aspx

  However, I get the same error when you import this .dll in LabView.

  The thing is that I have tons of other .dll files in .net (all in c#) and never had a problem like this. Defintely therefore, something obvious that I'm missing! I would be happy if you could please help me with this?

  redesign of the managed .dll as a assembly file has solved this problem.

• Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108

  I have an app VS c# that references the assembly OR world.  It worked fine in 32-bit Windows XP environment.  However, when I installed and ran the application in the Windows 7 64-bit environment.  The app was the following text:

  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
  "File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"

  Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform?  It's the same application binary.

  Thanks for your help!

  Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.

• "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found

  Hello

  Im having a problem. I write a program in Visual studio 2008 c# for Windows CE language in a machine of liliput.

  When I run the program in windows 7, I have no problem, but when I try to run my program in Windows CE I get the following exception (the projecto for Windows CE was created to run in this operating system):

  MissingMethodException is unmanaged

  "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found.

  The references from my program are:

  mscorlib.dll (Version 2.0.0.0) (length versio 2.0.0.0) - this dll do not exist in the program for Windows 7, appeared when I created the project for windows CE

  NationalInstruments.Vision.dll (Version 11.0.35.102)

  NationInstruments.Vision.Common.dll (Version 11.0.35.102)

  System.dll (Version 2.0.0.0)

  System.Data.dll (Version 2.0.0.0)

  System.Deployment.dll (Version 2.0.0.0)

  (Version 2.0.0.0)-System.Drawing.dll

  System.Windows.Forms.dll (Version 2.0.0.0)

  System.XML.dll (Verision 2.0.0.0)

  Throughout this reference is the Version of the Runtime: v2.0.50727 (it is the versions of Windows CE of liliput machine can run?)

  Can someone help me? I don't know why I get this exception

  Thank you for your help

  Hello UH and thank you for your message.

  I'm sorry I don't really understand what you are doing, you develop applications with Visual Studio 2008 and then deploy it on Windows CE or use directly in windows THIS? (I ask that, because Visual Studio is not supported on Windows CE: http://www.microsoft.com/en-us/download/details.aspx?id=7940)

  In addition, what device OR do you use? What is the fat of your project?

  Thanks for the responses,

• The former World Assembly references

  I created an instrument using NI-VISA driver, and I encountered an error trying to generate a help file for him.  I use c# in VS2008 with VISA 4.6.2 for the driver and file generator help (CodePlex) Sandcastle to generate a release build XML help file.  During construction, I get an "unresolved assembly reference: NationalInstruments.Common, version = 8.7.35.131'."

  The pilot refers to the assembly of the world (8.9.35.108) and the Assembly of NationalInstruments.Common (8.9.35.156); the common Assembly added automatically when I added the World Assembly.  The VISA feature is great - there seems to be no problem with these references.

  The error occurs whenever the manufacturer help try resembles the Assembly of the world (basically whenever there is a member that is accessible to the public of a world - as the Session type).  Using the libraries of reflection on the system I found that the version 8.9.35.108 of the Assembly of the world refers to the version of the common Assembly 8.7.35.131.

  I have attached a simplified example.

  I have confirmed the same behavior on another PC so I don't think it's my installation.  Is there a fix for this reference?  Alternatively, what version of NI-VISA contained the version 8.7.35.131 of the common Assembly?  Worst case, I can install this on my development PC just for builds to help.

  Thanks for your help!

  Hi strimble,

  National Instruments is based on Publisher policy files to redirect requests for NationalInstruments.Common to the latest version on the machine. The problem here is that Sandcastle does not respect these policy files, as shown here. I suggest you copy the former Assembly to your build machine, if you are able to find this on your development computer. If this is not the case, let me know and we can get for you to download.

• How can I fix error with package installed: "could not load file or assembly ' NationalInstruments.Daqmx.dll

  I'm fighting this problem for days (euphemism)...

  I used to work, but now isn't an installation package.  I tried to install and run the program on a couple of computers and the program hangs when loading the Dll NI.  I put everything ' x 86.

  The list of dependencies in VS2010 is illustrated in the attatched screenshot.

  The text of the mistake of trying to run the application on the target computer is lower in italics.

   

  Of course, I could use some help on this!  Thanks in advance.

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.DAQmx.dll' or one of its dependencies. The specified module could not be found.
  File name: "NationalInstruments.DAQmx.dll."
  at IPClientTest.MTF_Supervisor.mainSstart13)
  at IPClientTest.MTF_Supervisor.mainStartByParts)
  at IPClientTest.MTF_Supervisor.lblSelfTest_Click (Object sender, EventArgs e)
  at System.Windows.Forms.Control.OnClick (EventArgs e)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.Label.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34011 built by: FX45W81RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
  ----------------------------------------
  MTF_Supervisor
  Assembly version: 1.0.3.3
  Win32 version: 1.0.3.03
  Code: file:///C:/mtfDebug/MTF_Supervisor.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34003 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  MTF_ClassLib
  Assembly version: 1.0.1.0
  Win32 version: 1.0.1.0
  Code: file:///C:/mtfDebug/MTF_ClassLib.DLL
  ----------------------------------------
  NationalInstruments.UI.WindowsForms
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.WindowsForms.DLL
  ----------------------------------------
  NationalInstruments.UI
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.DLL
  ----------------------------------------
  NationalInstruments.Common
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/NationalInstruments.Common/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.dll
  ----------------------------------------
  System.Web
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34009 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  NationalInstruments.Common.Native
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/NationalInstruments.Common.Native/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.Native.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.Design
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Design/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Design.dll
  ----------------------------------------
  Accessibility
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------

  Salvation Lorne.V.,.

  Exactly how you install OR DAQmx on the target computers?  Even if you include the DAQmx merge module in your version, you always need to install DAQmx on the target machine separately.

  You can also confirm that the DAQmx.dll is installed in the same directory on the development and deployment of the machines?  And you have the same version of DAQmx on both machines?

  Kind regards