WAP54G and WRT54G to extend my wireless coverage



Tags: Linksys Routers

Similar Questions

  • E4200 w 2 - re1000 and still have problems with wireless coverage

    I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

    For my Apple TV and tower PC, PS3, I used a wired connections.

    But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

    Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

    Here is what is a must:

    One SSID in the House

    Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

    Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

    I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

    I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

    Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

    The only unknown is your neighbors (and other sources) Wireless interference.

    You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

    http://www.MetaGeek.NET/products/inSSIDer/

  • Bridge WRT120 and WRT54G wireless?

    I have a WRT120 connected to my modem by cable in the bedroom of my house before.  The signal is very weak in the room from behind, so I would use my WRT54G spare as acess point/bridge to extend my wireless range.  Is this possible without cable?

    No, this is not possible, you need to use a cable.  However, there may be 3rd firmware of DD - WRT that can work.  Visit their web site.

  • I use Airport extreme and cable Airport Express to extend my wireless network.

    My new laptop running windows 7 connects to the extreme, no problem. When I go to my store it will connect to the express. I have a laptop more XP and it links the two places without problem. I also have an Ipad3 which connects without a problem.

    I use Airport express to extend my wireless network.

    Hello

    Follow the steps in the article, and check.

    Setting up a wireless network

  • Airport Express - to extend the wireless network

    Hello

    I have 1 Airport Extreme, make a wireless network and I have 3 Airport Express, to extend the network.

    the Airport Express Terminal 2 have connection whit Airport Extreme. The last of them is too far. The last of them can connect to one of the Airport Express 2 located in Pentecost Airport Extreme connection to expand further?

    Sorry, but no.  The distant Express which is too far can connect to one of expresses it airport who are already extending the network... so that it can be used for AirPlay or to connect a USB printer. .. .but the distant Express cannot "extend" the wireless network and provide additional wireless coverage.

    Ideally, your network could have AirPort Extreme, placed in a central location in the House, and each Express which extends the network would be located approximately the same distance from AirPort Extreme... and... ACH Express would be closer to the AirPort Extreme to another Express.

    If this is not possible, then you need to look at a wired Ethernet cable solution for at least one of the Express features, or an Ethernet Powerline solution if you cannot run the Ethernet cable.

  • BBM BBM installation wireless coverage error

    I managed to download BBM. Now, there is not configuration. I just reset the whole phone if it is of no use. It says "not enough wireless coverage or your connection to the wireless network is turned off. If I reboot the phone it says retry but never stops. I can very well online on the phone. It says I have full signal.

    Thank you

    cannonball_g wrote:

    I managed to download BBM. Now, there is not configuration. I just reset the whole phone if it is of no use. It says "not enough wireless coverage or your connection to the wireless network is turned off. If I reboot the phone it says retry but never stops. I can very well online on the phone. It says I have full signal.

    Thank you

    Your profile says your device is 9320, right?

    You have an existing BIS plan with your operator? You need to be able to use the services of BlackBerry, including the BBM. Thank you and let us know!

  • I have a macbook pro 15 "model 9.1 4 GB of memory and want to extend to 8 which is the model of memory should I buy for my fastest machine, I have for several years.

    I have a macbook pro 15 "model 9.1 4 GB of memory and want to extend to 8 which is the model of memory should I buy for my fastest machine, I have for several years.

    See:

    http://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade/DDR3_160 0MHz_SDRAM

    Get only the memory of a place as above, since Macs are picky about the memory. Another place is crucial.

    If you can't swing for 16 GB (2 X 8 GB) replace a strip of 2 GB with a key of 8 GB.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • 15 - ac130nia: my wifi and bluetooth is still not detectable and can also discover other wireless networks

    My WiFi and Bluetooth is still not detectable and can not find other wireless networks

    @Pelumi10Hi

    Thank you for visiting the Forums from HP Support. It's a great site for information and questions. I read your post on wireless and Bluetooth connections are not always detectable not. I'm happy to help with this problem!

    I would need more information about this to help you better.

    • It has never worked before?
    • When the problem happened everything first?
    • You did the hardware changes as obtain replaced Wi - Fi?

    Please follow these steps and check out these links to try to solve the problem.

    1. Turn on your Bluetooth device and make it discoverable. The way that make you it discoverable depends on the device. ...
    2. Click Start > type Bluetooth > Select Bluetooth settings in the list.
    3. Activate Bluetooth > select device > pair.
    4. Follow all the instructions if they appear.

    Open windows control panel, open Power Options and next to your currently selected power plan, click Change plan.  In the next window, click on change advanced power settings.  In the next window, open 'wireless adapter settings' and then open 'power saving Mode'.  Next to on battery: click on the current setting and a drop down menu will appear - select 'Maximum Performance '.  Do the same for the sector.  Then click on apply and then Ok to save the settings.

    Restart the computer and see if this contributed to the issue.

    Also open Device Manager. Go to the network adapters and expand it. Select the network adapter for your device by clicking right on wireless and click Properties. Then go to the power management option and uncheck the box that says" allow the computer to turn off this device to save power. In addition, check the box that says "Allow this device to wake the computer"

    Please visit this link to solve the problems of Wi - Fi: http://support.hp.com/in-en/document/c03535285

    There's a video associated with the problems of Wi - Fi in the link.

    You can also check these links:

    http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/WiFi-connectivity-problem-in-Windows-8-1/TD-p/3951390

    http://support.HP.com/us-en/product/HP-15-notebook-PC-series/8499326/model/8942890/document/c04800801/

    To resolve Bluetooth issues problems please visit these links:

    http://support.HP.com/us-en/document/c03429630

    http://support.HP.com/us-en/document/c01060335

    To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If this solves the problem, Please mark this "accepted solution". If you need more assistance let me know and I will gladly do whatever I can to help.

    Thank you and have a blessed week ahead!

  • You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

    You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

    What you want to do with the ATV without an Internet connection?  It is designed as a device of Internet broadcast, so you can access online content via the big screen in the living room rather than the pocket computer in your pocket...

    technically I think its possible but you would still need an Internet connection for the installation and update of the software process and even less to download applications and games, but if you don't have an Internet connection apps/games will probably not work. I don't think that there is 'out of play'...

  • I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

    I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Good luck, you need to update or reinstall the latest driver.

    HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP - OfficeJet 4500 Wireless - support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

    I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

    Download wireless network drivers

    Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions.

    If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.

  • Canon EF 1.4 III and EF III Extender 2.0 compatibility list

    Can I please know what Canon lenses are fully compatible with EF III 1.4 and 2.0 Extender III

    Thank you

    See

    http://photography-on-the.NET/forum/showthread.php?t=41922

  • I've upgraded to windows 7 my netbook aspire one AOD250 and can no longer connect wireless

    I've upgraded to windows 7 my netbook aspire one AOD250 and can no longer connect wireless and downloaded the driver, but still no luck - any help would be appreciated.

    Thank you.

    Jen

    I just found out missed me an update of the driver when I was in the Device Manager and once I updated (obviously no has not updated the correct driver at the start) my wifi does not work.

    Thank you very much for your help!

    Jen

  • I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

    I have exactly the same problem in Windows Vista Ultimate Edition.  I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.

    I see that you asked initially that this issue in 2010.  Has there every been a resolution?
    Elliott

    My Eureka has been using netsh, explains Superuser.com «How to completely remove a wireless network from Vista» Everything I found on the Microsoft site doesn't give any examples on how to find profiles (netsh wlan name) or the statement appropriate to remove this profile (netsh wlan dlete name = "the name exactly as shown, case-sensitive quotes". That he solved it for me.

  • VPN between RV082 and WRT54G

    Hello
    I have problem with connection RV082 and WRT54G via VPN (gateway to gateway type).
    I created tunnel on the RV082, but ofcurse he does ' t work. Firewall on both routers is off.
    My setup
    RV082
    WAN address: 83.15.211.170 (DSL)

    WAN network mask: 255.255.255.248

    WAN gateway: 83.15.211.169

    Local address: 192.168.0.244
    Local netmask 255.255.255.0

    Local gateway: 192.168.0.244
    WRT54G
    WAN address: 95.50.235.202 (DSL)
    WAN network mask: 255.255.255.248 (the same ISP)
    WAN gateway: 93.50.235.201
    Local address: 192.168.1.1
    Local netmask: 255.255.255.0

    Local gateway: 192.168.1.1
    VPN:
    Local group: 192.168.0.0/255.255.255.0
    Remote group: 192.168.1.0/255.255.255.0
    Remote gateway: 95.50.235.202
    Everything seems to be correct, but I can not connect to RV082 to WRT54G. I have no error in the logs. Help, please

    The WRT54G is without VPN router. But there is no VPN capabilities. You cannot configure a tunnel VPN on the WRT54G.

Maybe you are looking for