Watch not boot USB

Similar Questions

• Aspire e3-111-p605 F12 does not boot usb

  Hello, when accessing the menu boot via F12 only shows Hard boot disk and network.

  The "F2" - order of precedence of Boot (legacy watch on the Boot Mode) does not seem to recognize the usb.

  work around?

  A plan to get the usb backup Acer for $44, but not sure that it would work with the current bios setup.

  This seems quite strange.

  my reference I can find boot USB BOOT of the BIOS tab, but this under settings of UEFI.

• Re: NB - after update BIOS not boot USB

  Given that I've updated the BIOS of 1.5 to 1.9 linux on USB does not start, request a drive after selecting the USB to boot.

  (1) if anyone can confirm this?
  (2) where can I download original order of 1.5 in BIOS downgrade

  Hey,.

  Before you start a lengthy discussion: what NB you have exactly? Toshiba has released different models of NB and it would therefore be important to know which model you have.

  And why you have updated the BIOS?

• Satellite L300-1AS - error PXE - boot error - will not boot from USB

  Startup error - error PXE-L300 1AS - will not boot from USB

  I recently bought a new HD to replace the original that my laptop takes an hour to load.

  I put the new drive hard at in the BIOS setting, I chose to boot from USB... USB is recognized as it appears on the screen of the BIOS. I disabled the LAN option as it gives me PXE error... I think that the USB files are not read. as I handed the old HD and attached to boot from USB but it just goes to the start screen.

  I thought that perhaps I bought the wrong HD, but a new appeared on the BIOS setting... I'm a bit confused and would appreciate it if someone could point me in the right direction...

  Any help or advice will be appreciated.

  Thanks in advance.
  Abul

  New HARD drive has nothing to do with it. Problem must be your USB key.
  In your ad you didn t wrote what is on it, and we don t know if USB can operate as boot device or not.

  I put t know what OS you want to install right now but original recovery DVDs or use Microsoft installation disc and install Win7 32 bit. I ve installed on friends L300 and it works perfectly.

• HP pavilion x 360-11-n011si: BIOS does not boot form USB key to CD USB even when the value of UEFI to allow

  Hi all

  I have a laptop beatsaudio that has been upgraded to win10: the HARD drive failed and I replaced it with an SSD.

  The BIOS does not allow to boot from USB USB even when CD install to UEFI key.

  Any help will be appreciated

  Hello

  I realized a work around:

  Secure boot off

  Legacy support on

  and here's the big one

  Boot HDD in legacy should be last on the list

  The BIOS does not recognize that there is no. OS installed and continue to the next boot device as any other bios hp good done, it just stops putting so he can finally boot USB.

  Thank you

• for hp laptop d008se, boot usb drive not in the sequence of boot in the bios!

  I have purched a HP Notebook Laptop (HP D008se) model with Win 8.1 only language X.64 bits.

  I want to boot from a USB key, I went to the bios by(ESC+F10) and went to the boot order, but there is no USB drive

  only (hard USB, CD/DVD, network, the OS Boot Manager), ok. I did the last Boot order

  I put my USB Bootable and press ESC, but my Flah is not in the list.

  Please, could say one met my, what I can do to boot from My USB, and is this model not supported USB bootable... it will be a problem for me!

  Spoiler (Highlight to read)

  

  

  Press the power button then immediately press the ESC key to access the boot menu choose the F10 key to enter the BIOS. Click the System tab and then click start options.

  In the start options, enable legacy support option.

  

  

  Press F10 to save changes and your computer will restart.  Make sure that the USB is connected to a usb port. Now you should see the USB in the selectable start options if it is indeed a boot device.  If the USB was not bootable you still not see in the list.

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• S10-2 is not boot from external cd (usb)

  I tried many variations, but my s10-2 is not boot from the cd.

  I want to install xp minimum cd.i directly configure the options of start or press f12 starting.it system recognizes usb cd on menu.but ignores the cd and boots of hdd.but there is no problem with windows xp.xp CD playback.

  I suspect that my lenovos bios.coz I tried my usb - cd machines and works

  u could install from a usb flash drive, even his most quickly...

  Homepage of WinToFlash - install Windows from usb-

• Network card not working plus-nouveau that bought now PC will not boot!

  Hello

  Mounted LAN realtek network card gave up the ghost so I bought this pci-e card on ebay.

  I installed it in each of the 3 slots of alternative but the PC will not boot with it in.

  This card is not compatible, or do I have to buy something else?

  Desktop HP Pavilion HPE h8-1070uk

  12 gig Ram

  Yes, exactly.

  Here is a link to many others...

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene & DEPA = 0 & Order = BESTMATCH & N = 100006519 & isNodeId = 1 & Description = USB + RJ - 45 + Network + adapt & x = 0 & y = 0

  I would like to know well why these PCIe NIC cards cause the PC does not start.

  People install PCIe firewire cards, cards network wireless, sound cards and all work fine, but .they wired NETWORK card doesn't seem to work.  Not every PC is but several.

  A lot of confusion.

• Portege R700-17Z bios not recognizing USB devices

  Hello

  I'm after some advice on a problem I'm having with my R700, I can't get the laptop to recognize USB hard drives start-up stage. I am trying to use Acronis to create an image that I have 40 of these laptops.

  The CD-ROM USB CD drive is recognized and is therefore a Corsair USB pen (which is unfortunately not large enough), but I have three hard drives USB (a Freecom Tough Drive, Buffalo MiniStation and Western Digital passport) and none of them are recognized by the BIOS. Legacy USB emulation is enabled.

  Am I missing something?

  Thank you, Karen

  Hello

  The BIOS does not support * USB HDD * as a boot device. Any reader USB CD/DVD or USB stick is bootable USB devices.

• How to configure the BIOS to boot USB on Satellite A50-110?

  Hello.
  I own a Toshiba Satellite A50-110 and I have a USB bootable Flash drive, but I don't know how to boot from the USB key.
  I guess I need to access and configure the BIOS. How can I do? Where can I get information on this subject? What are the steps to perform this task?

  TIA

  Hello

  As far as I know in the BIOS cannot be configured anything. As much as I now on this old notebook you can use just USB floppy for boot drive (U key at startup), but not the USB flash drive.

  Enter BIOS settings with the ESC key at first upward and check that all listed bootable devices.

• EliteBook 840 g 2: boot usb

  Hi gurus

  (A)

  I would like to make it bootable usb win 7 pro x 64 FIX;

  laptop is not equipped with an optical drive.

  (B)

  I have a windows to go drive hard usb3 workspace to another laptop (win 7 x 64 home prem);

  MBR, NTFS, single partition;

  works when it is running on x 64 pro win8; works by operating on Vista x 86 ATU;

  does NOT (cannot start) on elitebook 840 G2 win 7 x 64 pro;

  thnx in adv

  SPC

  @synpc

  Hey there!

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that you can not boot from USB.

  Try a few steps recommended below.

  A. Click Start in the search box type CMD.

  Right click on command prompt and select run as administrator

  Run diskpart utility by typing diskpart in the command prompt window and press "Enter."

  Find your USB drive disk number by typing disk list. We assume that the USB drive is 1.

  Run the following commands:

  Select disk 1

  clean

  create the primary partition

  Select partition 1

  assets

  format fs = NTFS

  Assign

  output

  Now, we have prepared a USB drive. Let's make it bootable:

  Insert the 32/64-bit installation disk in the Windows 7 DVD drive. Assume that it is D

  Go to D:\boot (cd d:\boot)

  If your USB drive letter is "e" Please run bootsect/nt60 e:

  Copy Windows 7 DVD multimedia content in root USB (etc. do not put in any folder) folder

  You are now ready to install Windows 7 from a USB key!

  B. you said that you are unable to boot from a flash drive on 840 G2.

  Turn on your computer, keep tapping key F10.

  You will start in the BIOS change the inheritance of secure boot startup option.

  Save the changes and exit the BIOS.

  You should be able to boot from the flash player now.

  Let me know how it goes!

  Have a great day!

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• Acer Aspire switch 10 - Boot USB / Windows 8.1 installation of USB

  Hello
  I recently bought Switch 10. As it has only 32 GB SSD cut into 24 GB of windows and 8 GB partition for recovery, I tried to merge these partition to get rid of the recovery and have only a single partition SSD. Longbstory short, I failed and got a blue screen, then a restart and now I have this:
  http://i.imgur.com/NmAkhgO.jpg

  I have Windows 8.1 the official site of Microsoft, I have orginal CDkey (not OEM Acer's). The version I downloaded is a 32/64-bit Installer (I think, but it can be 32-bit only)
  I tried to configure the BIOS by myself, but it always puts me the blue screen of windows (with error 0000225).
  I provided the BIOS with the default settings screens: http://imgur.com/a/jtyN2

  I prepared the USB stick to a .iso image with a program called Rufus, GPT partitioning system.

  Then I changed the BIOS settings to allow non-secure startup and boot from USB HDD first, and when you start, I hit F12. But I still get that: http://imgur.com/yE48diG

  -What would I do? Be able to start Windows 8.1 installator, clear all partitions on SSD and make sure that you have a 32GB with windows.
  -What I need? Help, because I can not boot from USB and run Windows 8.1 installator.

  I found the solution, everything works fine.

  To do this, you must keep two things in mind:

  1. you may not use Microsoft official .iso for the USB program - it does create a bootable USB stick for UEFI bios, the official downloader for Windows have the ability to create USB bootable .iso downloaded, but it is not able to do.

  You must create bootable ISO using software of Rufus (type simpy rufus in google or LINK), then all you have to do is to make sure that you have selected GPT partition scheme for your bootable usb key and the FAT32 file system.

  2. the most improtant thing which is our Acer Aspire Switch 10 supports ONLY 32-bit Windows, just all the instalators Windows that contains the version 64 bits are wrong. Conclusion is simple, you need only 32 bits instalator, the 32-bit/64-bit custom works (like only instalation of 64-bit that is obvious)

  Hope this has helped.

• PC will not boot or start the recovery console

  Windows XP 2004

  AMD Athlon XP 3000 +.

  AVG 8.0

  My friend tried to jailbreak his ipod. Now his PC will not boot the OS. It will go to the screen with the options to choose each time you start upward into the safe, normally last good known etc.. Choose one of these options results when control of the PC for the IDE drives and soon after an accident to return to the screen that says "a problem has been detected and Windows has shut down to prevent damage to your computer." I try to start the recovery console, but then I get a blue screen that gives the same spiel, then this Stop error message:

  STOP: 0X0000007B (0XF79BA524, 0XC0000034, 0X00000000, 0X00000000).

  In addition, I changed the boot order in BIOS and tried to use the recovery through an ISO boot console. He ends up crashing this first screen appeared. Even if the BONE is fatal, these guys really want to the GET data out of their hard drive.

  Thank you.

  http://support.Microsoft.com/kb/316401

  http://support.Microsoft.com/kb/324103

  Or, if you just want to back up your data and do a clean install:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!