Watch the Black Border ATI HD4670 and ST2410 HDMI Cable

Similar Questions

• How can I get rid of the black border around my screen?

  After an update, my screen resolution changed for no reason. Tried to change, but now I have a black border around my screen that I can't get rid of.

  Hello

  Windows Update will sometimes offer you updates of graphics drivers; NEVER accept them.

  Only go graphics drivers of your computer or the manufacturer of the graphics Web site map.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is the information on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• my screen goes black when I plug in my HDMI cable

  I have never had a problem with the help of my my TV HDMI cable to watch movies from my laptop.  I do not know whether the windows update is causing this problem, but when I plug in my HDMI cable to my laptop, the screen goes black and the TV receives no signal.

  Hi, I had the same problem when I plugged the hdmi for the first time that I chose the 'graphics options-> output-> TV' at first by right-clicking on the desktop. Later I selected "change pc settings" section of charms and the selected tab devices add a device and while the laptop was looking I have connected the hdmi cable. This is how I got to the TV screen.
  probably, you will need to turn off the TV and the laptop first. Then put on the tv and select the desired hdmi option before you put on the laptop and pressing on the ' logo window + p "or"fn + f4"keys. Lets c if it works

• I am trying to configure my laptop so I can watch a show on my TV with an HDMI cable. It doesn, t work

  I have a Pavilion dv7 laptop.  Windows 7 64-bit.  I am watching a video from my laptop to my tv using a HDMI cable and can't seem to get that issue.  Is there a key to seting it upward?

  Hello

  1. first thing I would check: the cable itself, which is its HDMI version, you may need 1.3 or higher? What is your TV (brand, model)?

  2 with the right cable, try the following steps

  (a) turn off the television and laptop

  ends (b) connecting cable

  (c) turn on the TV menu TV allows to accept PC signals (laptop)

  (d) turn on the laptop, go to display you should see TWO screens (1 and 2), select TV

  Kind regards

• I tried to watch the show from Stephen Colbert and not only audio video. Why?

  I'm a Firefox user dedicated for about 10 years now. The new current issue is: can I watch is no longer the Stephen Colbert show for some reason any. I have always used Firefox to watch this show. Now, I get only audio no visuals. I had to go to IE and it works perfectly. I only use his show as an example that might help with your application. I was curious if it's specific to Firefox and it is. IE displays video and audio. Advice?

  You can try to disable the HTML5 Media Player by setting these false prefs on the topic: config page.

  • Media.DirectShow.Enabled
  • Media.Windows - Media - foundation.enabled

  You can open the topic: config page via the bar of address and you can accept the warning and click "I'll be careful" to continue.

• I disabled Adblock to watch the content on Att Uverse, and since then it won't work anymore.

  I disabled Adblock Plus to watch a show on Uverse TV the other day, and when I went to him, again, it had disappeared; so I re-installed, but it's still not there despite the fact that he claims to have installed on my computer.

  Disable you Adblock more addons bar or a toolbar, click the icon and choose 'Disable all' what uncheck - mark the line. Nothing should disappear from your toolbars or be disabled or uninstalled modules.

  How do you turn it off, if you have disabled the extension itself it will appear at the bottom of the list of extensions such as being turned off, turn it back on and restart Firefox and you that you be back. In the extension options enabled once click on Options and tick all the items there and it will be active and visible in the bar of the modules. The list of options in the list of modules is identical to the list 'preferences' in the module in the icon bar. The options there is the same as the options in the list modules menu options. Disable menu options is identical to the item 'disable all '. ' Ctrl + / ' will show or hide the module bar.

• When I try to go on "fullscreen" while watching the screen tube u develops and becomes empty. The sound still works. I have Firefox. Can someone help plse?

  I can't watch any of the programs in U tube on change too many full-screen. yesterday everything was ok. I tried a restore of the system without result.

  Hello

  · Is the behavior even with Internet explore?

  If Yes, then you can follow the procedure:

  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. on the performance tab or on the Troubleshooting tab, move the hardware acceleration all the way to the right (Full position).

  d. click OK and then click Close.

  e. If you are prompted to restart your computer, click Yes.

  If the problem is only with Firefox, you can post your request in the support forum of Mozilla for assistance: http://support.mozilla.com/en-US/questions

• Color cartridge loaded in the black print cartridge slot and vice-versa - now cannot remove the

  Accidentally, I loaded the new color and black cartridges in the wrong slots, and now I can't delete them.  How can I get them without breaking the printer?

  If you have a spare cartridge you can look and see a small crest on the top of the cartridge near the front.  This is the part that is stuck.  Using a blunt knife or the handle of a spoon to gently release the cartridge down a little should allow the cartridges to be released.

• Watch the keep on moving up and down

  Original title: monitor

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • monitor
  • Error messages
  • uninstalled software that is not used for a long time
  • I did a full system scan

  Hi bharnuts32,

  1. don't you make changes before the show?

  We recommend you first to check if the monitor settings are correct. Use the buttons on the monitor to adjust the setting of the correct display.

  Step 1: Adjust your display settings
  a. see change screen resolution
  b. application of the correct screen resolution and check the difference.

  Step 2: Update video card driver
  a. see update a hardware driver that is not working properly
  b. restart the computer once you have installed the right update and check the difference.

  Step 3: Check if a non-Microsoft program is at the origin of the problem
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mysterious black border (only) at the bottom of the first screen iPhone

  I have an iOS application that I wrote in 2011, and I'm trying to upgrade to the latest iOS and devices.  I have a thick black border at the bottom of the first screen of my request, for most combinations Device/Simulator and iOS. This is * not * a black border at the top and at the bottom of the screen problem, who has been treated exhaustively in the forums.

  There is only a single black border at the bottom of the screen. Also, the border is only broadcast on the first screen of my request, that has buttons to go to the rest of the application. Even if I navigate to the first screen of my request, somewhere inside the application, the border becomes visible. There is no black border in the other forms in the application, apart from the first screen.

  It is * not * seems to be a launch image problem. I have a picture of launch, [email protected], and the launch image works fine. Here are the setups I get or don't get the black border:

  iPhone 4S (iOS 9.2) Simulator - without black border

  iPhone 5 (iOS 9.2) simulator - black border

  iPhone 5 (iOS 8.1.3) device - without black border

  iPhone (iOS 9.2) 5s simulator - black border

  iPhone 5 s (iOS 9.1) peripheral border - black

  iPhone 6 sec more (iOS 9.2) Simulator - black border

  iPad 2 (iOS 9.2) Simulator - without black border

  iPad (iOS 9.2) air Simulator - no black border

  iPad 2 Air (iOS 9.2) Simulator - without black border

  Pro Simulator (iOS 9.2) iPad - thick black border all around the application window

  retina Simulator (iOS 9.2) iPad - without black border (at the bottom of the screen)

  I tried everything I could think of, but nothing seems to work.

  Hello sandpjain2,

  Everything you wrote in 2011 will likely be rewritten using the automatic formatting.

• After that I did the timeline - I get a black border on one side of all my photos

  Hello world. I'm doing a simple simple slideshow (no effect or alterations of any type) of pictures taken with my camera canon 6 d. They have been taken with the best resolution of 5184 x 3456. The ratio is 3:2. When I let fall one of the photos in the new point bin and I let first choose the sequence for me, first do not find one of its presets, but creates instead a sequence custom with dimensions that correspond to my photos of 5184 x 3456. It also corresponds to the normal of 1.0 square pixels. The dimensions of the video previews it creates are 1620 x 1080. Just after the sequence is created I get a solid red line in the timeline and at that time my photos fill the program monitor completely even during playback, but as soon as I made the timeline, then I get a solid black border to the East (from my point of view in looking at computer) all my photos, I spent a lot of time on it to try to find me a solution. I couldn't do it. So I did an experiment and I resized images in 16:9, and as soon as I did that the first matches a sequence of his presets and the problem disappeared. I think that the first sequence that is format of 5184 X 3456 with my native is not quite correct. But my question is how to find the right order? Ultimately I have trying to find a way to make a slideshow on the front using the images to their original dimensions mentioned above without the black border. the photos cannot be affected by any means, because they must be used in a demonstration of the Court of justice. Could someone please help me with this? Thank you very much. Umberto.

  Umberto, sorry for the long time between responses. Finally, I got the chance to test with your images and was able to reproduce it on my system. While I can't tell you why this is happening, I have a work around you.

  The problem is in the render files. When you return your files PP done new video files and play those back instead of the original and support for some reason to MPEG I-Frame rendering only (default) creates this black bar.

  I imported two photos into a new project in Premiere Pro v2015.1 and drag them to the new sequence button. They played back normally. Then, I made the timeline and saw your black bar on the right side.

  I open the sequence settings and changed the File Format of video preview GoPro CineForm (YUV 10 bit) and then made it and it worked fine! Personally, I normally use QuickTime ProRes codec, but I see on your screenshots that you run Windows, so the GoPro CineForm codec is probably your best option. Which should contribute, and during this time you should present this as a bug to Adobe since it is so easily reproducible.

  See you soon,.

  Matt

• ImageSharpen & black border

  When I use the ImageSharpen function, it adds a black border inside pixels - it works different from that of the "frontier" tag because it does not add the border for the dimensions of the image, it overwrites all the pixels around the image.

  How can I turn this off?

  This seems to be a known issue with some sharpening methods. I don't know if this problem has been fixed in CF9. But for CF8 workaround seems to be using a different method for sharpening.

  A brief glance confirmed these popular image components seems to use ConvolveOp class of java as a workaround for the problem of ImageSharpen

  http://www.Alagad.com/projects.imageComponent

  http://www.opensourcecf.com/ImageCFC/

  http://imageutils.riaforge.org/

  If you are interested, here is a good article explaining how sharpening works with java ConvolveOp class and how to avoid the problem of the black border. http://www.InformIT.com/articles/article.aspx?p=1013851&seqNum=5&rll=1

• Black photo using instead of the black regular for the general impression

  I have a printer C309a All In One Photosmart Premium.   He left black printing, so I replaced the black ink cartridge large and it would not print in black.  I checked ink levels in the settings and it says black of the Photo came out!

  I do not print photos.  Why he uses photography in black instead of the ordinary black?

  I have verified that my specific print settings 'General everyday printing"rather than photos, etc. I looked through all the settings on the hardware and the software, but was unable to find anything that solve this problem.

  Anyone know what I can do to make the printer to use the wide use, black General rather than the photo black ink?

  Covcomm wrote:
  

  OK, thanks for the quick response.  I tried to put into service of "plain paper" and reproduced, but still the black does not appear.  The other colors are, then it must use more black photo than the general use of the black.

  If I understand your answer, the printer requires that both black cartridges have ink to print any black, even if I'm not print photos?

  OK, if the printer goes through the motions of printing but does not print black it would indicate a problem with the print head.  Try to run up to three cycles of cleaning printhead from the Toolbox.

  While a photo of small amount black (and all other colors), ink will be used to serrvicing it will not print on paper for normal text.

• Photoshop: The black brush tool covers layers above it

  http://prntscr.com/b9r299

  The main drawing and color is on the tier 2, but to show the question, I did blacks 2 layers below that. As you can see, the Black just covers everything and the darker color on the brush, it covers the upper layers. If I use a lighter color, it'll be a little opaque, but always the cover upward and white remains on the active layer.

  I honestly have no idea how to solve this problem and it is only the application of this document. I tried to move the layer to another document, but the effect is always the same. My finger down to that but there are still a lot of unknown territory, I don't know where I go from here.

  The visible layer has an opacity of 100% and a normal blending mode. Check your other layers. Layers can be changed after the fact.

  Your current brush has an opacity of 100% and a normal blending mode. Either change would cause also this situation as you paint.

  First check the layers.

  Then try painting with different opacities and blending as a test modes to see how it works. Do it on a new layer, so you can trash.

• How to get the default border for TextField?

  In my textfields entry UI, I have them red border if the user enters invalid data. However, I need to reset the border to how it was.

  field.setStyle("-fx-border-color: gray;");
  

  It does not have the default border on windows XP (JavaFX2.2.21)

  The default border is rounded and lightgray.

  I also tried without success

  field.setStyle ("border - fx - color: null;" "");

  - and/or border - color: null; ») ; r color: gray; »

  The style sheet by default (in Java 7), caspian.css, is not actually apply a border to the text field at all but use layered backgrounds of different radii for the border effect.

  The best way to achieve the desired effect is to add and remove a style from the text box class and set the border color in an external style sheet. However, you should be aware of the https://javafx-jira.kenai.com/browse/RT-23085. One solution is to define a border radius default of zero on the text field and a different RADIUS to your "custom" css class Given that the default style sheet does not have a border that won't break anything.

  Example:

  import java.util.regex.Pattern;
  
  import javafx.application.Application;
  import javafx.beans.value.ChangeListener;
  import javafx.beans.value.ObservableValue;
  import javafx.scene.Scene;
  import javafx.scene.control.TextField;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class ErrorTextFieldTest extends Application {
  
   @Override
    public void start(Stage primaryStage) {
    final VBox root = new VBox();
    final TextField textField = new TextField();
    root.getChildren().addAll(textField);
  
    final Pattern intPattern = Pattern.compile("-?[1-9]\\d*");
    final String errorCSSClass = "error" ;
    textField.textProperty().addListener(new ChangeListener() {
        @Override
        public void changed(ObservableValue observable,
            String oldValue, String newValue) {
          if (newValue.length()==0 || intPattern.matcher(newValue).matches()) {
            textField.getStyleClass().remove(errorCSSClass);
          } else if (! textField.getStyleClass().contains(errorCSSClass)) {
            textField.getStyleClass().add(errorCSSClass);
          }
          System.out.println(textField.getStyleClass());
        }
      });
  
    Scene scene = new Scene(root, 200, 100);
    scene.getStylesheets().add(getClass().getResource("errorTextField.css").toExternalForm());
    primaryStage.setScene(scene);
    primaryStage.show();
    }
  
    public static void main(String[] args) {
    launch(args);
    }
  }
  

  errorTextField.css:

  @CHARSET "US-ASCII";
  .text-field.error {
   -fx-border-color: red ;
    -fx-border-width: 2px ;
  }
  .text-field {
   -fx-border-width: 0px ;
  }
  

  (Note: there is no space in ".text - field.error".)