Water damaged ipod data recovery

Similar Questions

• Corrupted data recovery water Iphone 6

  We know anyway to get data of an Iphone that does not turn on?

  I am desperate to get my photos from my broken phone and a loan to pay for it, but I do not know if everyone can do?

  The photos I want are not saved on icloud to bring from the phone itself are the only way.

  However, it was damaged more than a month there are water and did not put in operation since

  Thank you

  The bottom line is not. You can pay a ton of money for a service of data recovery, but it is useless with the encryption using the iOS and the iPhone with your data. All what they will recover is meaningless strings of gibberish, not files and with no way to decipher gibberish it's worthless.

  Sorry, but that the data is finished now.

• How to back up data from the iphone water damage over 6 sec.

  I dropped my iphone more than 6 s in sea water, and it seems capable of lighting (which shows a black screen). I'm trying to back up data. When I connect the iphone with the computer, the following prompt box appears on itunes. Now I'm confused. Could someone answer my questions please?

  1. This means that my iphone is still able to turn it on?

  2. that means that only the screen is broken and the motherboard still work?

  3. How can I save the data without entering the password by using the touch screen?

  Thank you very much.

  

  This means you should STOP PUTTING ELECTRICITY through your phone untreated, ack!

  Your phone has a display problem, but yes - it lights up.
  Perhaps your problem is just a bad screen (which is unfortunately a part of $250 to a 6 sec more now).  Apple cannot help you with other water damage that offers to sell you an iPhone refurbished for $349.

  But most likely, your problem is also on the logic board - usually fixable.

  There is no way around the need for touch operation and the image on the phone to access the data.

  In order to access the data on the phone, you need your advice to hold the power and start, (it does) you need of your screen image lines, and you need to contact work.  Ideally, you would also have your backlight lines works as well.

  Most of the phones in this condition have a pretty good shot in data recovery in this situation - touch, and line of the image problems are usually solvable if your phone can be detected by iTunes.   It is certainly not DIY work, this is a troubleshooting open-ended the microsoldering and level of card issues.

  Your only option for recovering data would be to find a good microsolderer experienced in data recovery.

  I recommend to replace any phone which has seen water, corrosion on the Board always weakens solder everywhere, so the phone is likely to have a shorter duration of life more problematic.

  Note: It may be possible to cancel your option for the swap of OOW $349 at Apple if you continue recovering data at the level of Council - although I've never seen this happen.

• for damaged or not data recovery software damaged a hard drive for windows that's easy to use and understand

  Hello

  I would like to know what data recovery tool is the best for professional use for deleted files, pictures ect.

  'more' to recover damaged hard drive data.    I'm looking so recovery tool for real data that is easy to use and understand who can recover all types of data from hard drive damaged or undamaged

  Thank you

  Johan

  Tuesday, January 14, 2014 15:20:06 + 0000, johan davidian wrote:

  I would like to know what data recovery tool is the best for professional use for deleted files, pictures ect.

  If you are talking about undelete programs, car brands, or
  anything else, which is better is a matter of taste. You will get different
  responses from different people.

  That said, I like http://www3.telus.net/mikebike/RESTORATION.html

  'more' to recover damaged hard drive data.    I'm looking so recovery tool for real data that is easy to use and understand who can recover all types of data from hard drive damaged or undamaged

  If you can recover data from a damaged disc depends on what the
  the damage. But in general you can not. In most cases, your only recourse
  is to bring or send the drive to a professional file recovery company.
  This kind of service is very expensive and may or may not work your
  case.

• water damaged iphone memory are accessible by others?

  So I found a place that is ready to buy my water damaged iphone 5s, problem is that they want remove me device from my icloud account and I'm not sure and didn't quite stupidly asking why they need me to do, so I am wondering here if they are able to access my memory of the iphone. I tried to connect my phone to my PC, which says that the device is discoverable but not readable, but when I used 'Wondershare Dr.Fone' it allowed me to get my data through Itunes backup file recovery. Which brings me to my assumption that if this software can access memory from my broken iphone, it means that other people can also? If so, how can I completely wipe my phone memory?

  Sea water is corrosive. It is doubtful that the phone still works.  If you are concerned about this topic, then do not sell.

• Plu heating and water damage

  my ipod fell in the pool and ive put in the rice, but it does not turn when I put load response by heating but the screen is black and nothing happens.

  Do not mix water and Electronics: strips of thin copper on the circuit board can corrode easily. It is very likely that you always have it damaged. Talk to an Apple Store - they can offer you a replacement reduced, although I don't know what their current policy (except that if it is still under warranty covering the water damage).

• to the 6s iphone water damage more

  My iphone has been inundated by sea water for about 3 seconds. I have breath-sec, put in the rice, but it won't always turn.

  However, I havn't opened the device on mine. In this case, can what support I get from Apple? I heard someone who has encountered the same problem paid about $300 and got a refurbished Apple iphone.  I understand that the liquidated damages are not covered by the warranty, but can I pay $329 for a warranty and get a new iphone more than 6 s?

  In addition, is anyway to save the data when the iphone can not turn on?

  You are right that the water damage is not covered by warranty. If you have Apple Care Plus, then it is covered as one of your accidental franchisees. If you don't have Apple Care Plus, then it would be a one off replacement under warranty. Depending on your location for the cost, it's the cost in the U.S., $329. See this link, and you can translate to your location if necessary. http://www.Apple.com/support/iPhone/repair/other/

  If you cannot turn on the unit, then the only data you have are your last backup.

• IPhone 6 s water damage, the phone turns on, is the battery just fried?

  My phone got wet almost a hot tub... was not at all.  Tekdry working on it, so its dry and did not work during a day.  Now its finally works when it is plugged in, but used to hold a charge and seems to be stuck in recovery mode.  IM more than sure that it must just be the battery.  In any case, she takes in the Genius bar, unfriendly guy told me they would not replace battery water damage indicators show?  Why wouldn't they just allow me to pay for a replacement of the battery?  I know it may or may not work and of course my phone is out of warranty damage, if Im not looking to blame future maybe problems on Apple.  Just shocked I couldn't give them $90 to a new phone?  Is this a common practice?  They said that they would only replace whole phone for $299... Please help or give advice, thank you!

  Yes, it's standard. Your only option with Apple will be to pay for a full out-of-warranty replacement device.  The costs for this in the USA are $ 299 for which you get a refurbished device to factory OEM with a 90 day warranty.

• Options of data recovery for crashed HARD drive

  My friend HARD drive gone bad. She has not saved. She has her thesis on it (any resemblance to characters from the fictional movie, living or dead, is coincidentalt. "It's true).

  I know there are options to recover the data. But I'm not familiar with all of them and how much they cost.

  One of her friends which is a network administrator, and continued his studies of masters in computer security will attempt to recover the data for it. I fear that it may just try to boot from a CD and try to read the data, which can worsen the damage.

  What other options does have?

  Thank you

  If it crashed, she may need data recovery specialists.

  These are some $$$.

  You can read this:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Samsung hard drive crash data recovery

  I recently had to replace my hard drive on my desktop Dell Inspiron 503 S.  How can I resurrect the data of the
  Fried disc.  In my view, that the bad drive has a problem with the circuit board, since I am unable to do anything with it.  Thank you for your help.

  Rgds,

  Tony

  If the disk target hard is physically damaged as you say, you cannot receive it yourself. You would need to send it to a professional data recovery company. I use savers by car, but there are others. General prices run from $500USD on-site. Investors recovered all disk data on a portable player that failed for one of my clients, and it cost $2 700. He thought that it was worth the money; only you know what's worth your data. I understand that some insurance companies now cover fresh data recovery so check with yours.

  Drive savers - http://www.drivesavers.com MS - MVP - Elephant Boy computers - Don ' t Panic!

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Help! Data recovery!

  Hi all

  My laptop was working fine when suddenly it became very slow access to the data for a couple of days. The next Win7 has not loaded up. Now I can't even the Dell BIOS screen upwards and the course when I turn it on. Just a black screen (is powered but).

  I thought that it would be a software problem or a virus, so I brought a small repair shop. The guy said that when he connected the HARD drive up to his machine, he makes noises and he couldn't access my data. He said that I should replace the HARD drive and to recover my data, I could send the HARD drive damaged in a laboratory where they could use their spare parts instead of those damaged to perform the data recovery for me, but it would cost around HKD$ 5,000 (USD$ 650).

  This sounds a little expensive. I recently bought an external DRIVE to backup drive and had not saved all my files at this point. My Dell warranty missed just after it happened so I don't have the chance to call on this subject. If anyone knows of any company that will perform the recovery of data on my HARD drive (or Dell will do it for a lower price), please let me know: I am desperate at this point!

  Thanks for taking a peek

  Wes

  Data recovery is very expensive.  The price is relatively cheap compared to the prices I saw here in the United States.

  It's lesson on the conduct of periodic backup on an external device.

  Dell, to my knowledge, offers no service recovery.

• Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

  Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

  HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

  Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

  Phoenix BIOS, hard drive test result: "Fail #1-08".

  I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

  However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

  How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
  Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

  I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
  I contacted HP to order recovery disks, but they are no longer available for my computer.

  Any suggestions would be greatly appreciated!
  Jon

  Update...

  I found a site that offers the following:

  http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

  Recovery Kit 435422-001 for HP model dv6108nr number

  

• Full VM data recovery or just snapshots?

  Hi people,

  I'm really in doubt on this subject.

  I started a job to backup with approximately 20 virtual machines, and after a while, when it finished I checked the ocupied backup size. Then I surprised because the size of the entire backup was only 64GB, and the storage space total occupied by all virtual machines is about 1 TB.

  
  So, how can I do a full backup vm?

  Example/Question: If I lost the entire data store where my vm running (one really disaster), I can restore my vm with data recovery (with backups stored in the other data store)?

  Kind regards

  sm4rtins.

  I don't know what help I can be, because my main experience with VDR is full of episodes of frustration. It could have been a reasonable product, but it seems to be deliberately crippled, and although version 2 is much more stable than the 1.x version (we meet only a few points of restore damaged about once a month or more, and not twice a week), it's always make us nervous.

  The only thing I would say is that we use fast SAN storage for destinations. VDR doesn't seem to be sensitive to the speed of disk I/O, and my assumption is that we get a restore point damaged when the disk i/o on the SAN is high (the SAN is shared with about 40 virtual machines and several physical servers that use for cluster storage databases). We do not have the data to back up this hypothesis (still trying to get a handle on how I'd get I/O stats to prove), but I don't see what it might be (other than the product being simply bugged, which might be the case).

  Could you move your store of destination from NFS to a fast SAN, just to see if the error rate?

• Data recovery when the files corrupted

  I am interested to understand if you can easily recover data if files logs damaged for some reason any. So far I do not see how this can be easily achieved db_backup requires a work environment, and because log files can have disappeared, the LSN of the file data will be higher than the last newspaper - and therefore refuse to create the environment.
  
  Ideally, I guess, I'm looking for a tool that can reset the LSN in place. It would be preferable to have access to your 100 GB of data and accept a small amount of data loss or inconsistency that have nothing.
  
  Thank you

  Hello

  NSE reset can be done using lsn-r db_load or by using the lsn_reset() method, and it is in place.

  If your log files are damaged, you will need to check the database files (you can use the BDB db_verify utility or the verify() method). The actions you take more depending on the result of checking the database files of:
  -If they check properly then you just reset the LSN and the ID file in data bases and start with a fresh environment.
  -If they don't check properly, you can restore the most recent backup data, or you can perform a dump of data recovery in database files using db_dump - r or r db_dump and reload the data using db_load. see doc Dumping and reloading databases in the Berkeley DB Programmer's reference Guide.

  Kind regards
  Andrei