Full VM data recovery or just snapshots?

Similar Questions

• Data recovery backup job fails with error-3902

  Version of the device - 1.2.0.1131

  Data store - cifs datastore - 489 gb

  Number of backup VMS - 26

  Average size vm - 25 GB

  Question I get is "unable to create snaptshot for vmnamehere, error-3902 (file error)."

  I tried ping all the esx host, which works very well, as well as vcenter host, very much so.  I put the esx hosts and vcenter host in/etc/hosts file too.

  I restarted the vdr unit that works very well.

  I can take snapshots of the virtual machines manually as well.

  Backups have worked on those virtual machines in the past and just stopped all of a sudden.

  Integrity controls work.

  What else can I try?

  Post edited by: kdon

  If money is not a problem I suggest go for vRanger veeam backup or connection of quest. It removes all the headaches I have with data recovery.

• Pavilion p6537c: Dead Win 7 C drive, should I go direct to 10 for a new disk? Ideas on data recovery?

  Question: Installing an operating system on the new replacement drive:

  750 GB hard drive on my Win 7 Home Premium desktop is completely dead. [See data recovery? below.] With regard to the new replacement unit 1 TB, I don't have recovery discs (my bad) and can get a USB bootable HP for $30 in 5 days.  But if I will Windows 10 in any case, would it not easier to simply direct that, assuming that I can download from the MS site?  Is this possible or do I have a valid Windows installed before 'upgrade '?  I have the serial number of windows etc. since it is a 64-bit licensed machine Win 7 legit bought new at HP.  There cpu: AMD Phenom II X 4 830 (D) 2.8 GHz and 6 Gig of RAM. Tips appreciated!

  DATA RECOVERY question: C drive would not start at all in a local computer store and they refer only to the people of data recovery. Any ideas how I could do this, or at least try, me? Otherwise, any suggestions on the most cost-effective way to get what I can (if any) out of the disc?  I don't have an idea as to why/how it has failed or the status of the Board at this point.

  Thank you very much!!

  Tommy

  From W10 v1511 that you do not have to enter a key when it is stored in the bios, W10 will find that during the installation, so you can just go right to the 10 and spend 8 installation.

  Even if it is not stored in the bios, you can enter a product key valid W7 orW8 during installation of W10 and he will accept it.

• Help to remove the partition on a hard drive and data recovery

  I have two hard drives in my PC, the C: drive is 80 GB, and the F: drive is 120 GB.  The second drive (120 GB) is divided into two partitions.  I just deleted the partitions and makes the hard drive again in a single disc, however I had some important files on the F: drive that I thought I had copied to the C: drive but they are not there.  Is there anyway that is using the software I can return the drive to two drives and recover my data, please help

  Hello

  First of all, do not use the hard drive. This can make things sunk. A few things may already be unrecoverable. I would even delete the drive letter to stop inadvertently automated processes to use.

  There are two ways I can think of.

  1. buy a partitioning software disk that supports the undelete partition. On windows XP PartitionMagic was a very good product if symantec will still sell it. Given that Symantec has continued to develop, I had to switch to product partition Paragon. Sound was trash to some things, cloning in particular a double boot with loads of partitions - it has an undelete function which I didn't use. The fact that you have created a new partition could mean that the restoration may not work. You may need to delete the current, probably empty, partition everything first and then perform the restoration.

  2. buy a data recovery software that will scan the hard drives, including the unpartitioned space. I chose R-Studio and it was very good stuff even recovery from hard drives that fail. It was not 100% effective, but it is perhaps down to the severity of failure rather than the product. In situations like yours, it was very effective.

  Please mark this as useful or response if applicable.

  Tricky

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Options of data recovery for crashed HARD drive

  My friend HARD drive gone bad. She has not saved. She has her thesis on it (any resemblance to characters from the fictional movie, living or dead, is coincidentalt. "It's true).

  I know there are options to recover the data. But I'm not familiar with all of them and how much they cost.

  One of her friends which is a network administrator, and continued his studies of masters in computer security will attempt to recover the data for it. I fear that it may just try to boot from a CD and try to read the data, which can worsen the damage.

  What other options does have?

  Thank you

  If it crashed, she may need data recovery specialists.

  These are some $$$.

  You can read this:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Netflix in WMC «there was a problem of data recovery...» »

  I installed the latest round of updates (Ultimate) of Windows Vista and it apparently burst Netflix in WMC.  Now, I get the error:

  "There was a problem of data recovery. Make sure your internet connection is working and try again. »

  Internet works on the machine.  I reinstalled Silverlight (v4) and Netflix for WIndows Media Center.

  How to diagnose and repair the problem?

  Thank you!

  Keith...

  Sorry for the delay, but I've been busy (in my free time) trying to get this to work.

  I gave up trying to resuscitate MCE and installed a brand new Windows Vista Ultimate Edition with Service Pack 2.  After apply all WIndows patches and installation of Silverlight, I have the "Netflix" element in MCE.  He invites me to install, what I'm doing.  However, every time I start MCE and go to Netflix, he tells me to do reinstall - no login screen.

  I tried all the "mcupdate" article and then supported your steps above, but no go.

  I did this twice, so it wasn't just a fluke.  Apparently, the part of Netflix to MCE is not detect the plug-in that it installed.

  Any thoughts on what to do then?

  Thank you again...

  Keith...

  Later: I ran "mcupdate" after the steps you suggested, and now Netflix is gone again!

  Later: same problem on my other computer running MCE and Vista.  I don't want to mess up this computer so I left as what.

  Later: opening of a new post on problems become Netflix to work with a clean install.

• Help! Data recovery!

  Hi all

  My laptop was working fine when suddenly it became very slow access to the data for a couple of days. The next Win7 has not loaded up. Now I can't even the Dell BIOS screen upwards and the course when I turn it on. Just a black screen (is powered but).

  I thought that it would be a software problem or a virus, so I brought a small repair shop. The guy said that when he connected the HARD drive up to his machine, he makes noises and he couldn't access my data. He said that I should replace the HARD drive and to recover my data, I could send the HARD drive damaged in a laboratory where they could use their spare parts instead of those damaged to perform the data recovery for me, but it would cost around HKD$ 5,000 (USD$ 650).

  This sounds a little expensive. I recently bought an external DRIVE to backup drive and had not saved all my files at this point. My Dell warranty missed just after it happened so I don't have the chance to call on this subject. If anyone knows of any company that will perform the recovery of data on my HARD drive (or Dell will do it for a lower price), please let me know: I am desperate at this point!

  Thanks for taking a peek

  Wes

  Data recovery is very expensive.  The price is relatively cheap compared to the prices I saw here in the United States.

  It's lesson on the conduct of periodic backup on an external device.

  Dell, to my knowledge, offers no service recovery.

• Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

  Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

  HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

  Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

  Phoenix BIOS, hard drive test result: "Fail #1-08".

  I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

  However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

  How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
  Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

  I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
  I contacted HP to order recovery disks, but they are no longer available for my computer.

  Any suggestions would be greatly appreciated!
  Jon

  Update...

  I found a site that offers the following:

  http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

  Recovery Kit 435422-001 for HP model dv6108nr number

  

• Seagate Barracuda 7200.11 failed drive and data recovery

  I own a HP Pavilion Media Center m8350f PC witch came with a 750 GB Seagate Barracuda 7200.11 internal hard drive model #ST3750630AS.  After about 3 months, the system didn't recognize the hard drive.  Having initially contacted HP tech support in December, they told me to send the PC to them for hard drive replacement.  They were unable to diagnose anything other that the drive had failed.  Yet I have to send it, because I know that the drive works, it's just that it is not recognized by my system.  I need a car access.  No replacement drive.

  I discovered recently, Seagate press release that they shipped a defective lot of readers with firmware.  In their initial press release, they stated:

  "We believe that the vast majority of customers are no disruption related to this issue, and that concerned readers can be used as is. But as part of our commitment to the satisfaction of the customer, Seagate offers a free upgrade of the firmware to respond proactively products likely to be affected. This new update fixes compatibility problems that have occurred with the download of the firmware provided on our Web site on 16 January. We regret any inconvenience that firmware problems have caused to our customers... " In the unlikely case where your drive is affected and you can not access your data, the data still resides on the disk and there is no data loss associated with this issue."

  Now that the real problem has been identified, what alternative support is available from HP at this topic?  HP will push their provider, Seagate, to extend this offer to the customers of HP?  Can HP unlock these discs?  The average consumer cannot ' of the Nations United-brick ' these readers with the new firmware and I guess, it's relatively easy for Seagate (i365) data recovery company to manage.

  Bottom line: based on my understanding of the problem, readers have not suffered loss of data, they are stuck in a 'busy' State and must be unlocked.  This is a critical point, because I believe that no one really cares to know if they get a new drive.  They want to only be able to access their data and awaken the drive is all it takes.

  My previous post was the original incorrect announcement of Seagate Barracuda chess.  The message I pasted was monitoring them upward.  The correct statement is below:

  "We offer free data recovery, because the drive information is not deleted. He's just made inaccessible by this suspect firmware,"spokesman of Seagate Michael Hall.

  Seagate said it has reissued the firmware originally proposed last Friday, saying: he has isolated the bug in the firmware in a "limited number of Barracuda 7200.11 hard drives with the SATA drives based on this platform of products, manufactured until December 2008. "In some circumstances, data on hard drives can become inaccessible to the user when the host system is powered on," Hall said.

  "Although we believe that the vast majority of customers are no disruption related to this issue, as part of our commitment to the satisfaction of the customer, Seagate offers a free upgrade of the firmware to respond proactively products likely to be affected", he added.

• Why my Illustrator CC is not so much announced the visible data recovery area for me?

  I just saw that Illustrator CC has the new feature to be able to recover files after the Illustrator crashes but when I go to

  > Preferences

  > file handling and Clipboard

  ... data recovery area I've read about is not there.

  As tone said, what version you are using? Data recovery works in CC2015 (19.X.X).

• "data recovery" indefinitely in the console of vCM

  When I try to display the folder "templates", under the 'Virtual Critetre' folder under 'respect' for the vCM console section, it does not display models.  The status bar at the bottom says "data recovery" indefinitely.  Anyone seen this before?

  Most of the other files are not either.

  attached screenshot

  This is normally due to have messy stop a client system. Bad data gets cached in an XML file that is used to track the filters of the user on the nodes.

  A workaround is to connect to the VCM by using a different URL (for example the IP address instead of the computer name), or FULL domain instead of the short name. This works because the data cached by IE are associated with the URL.

  In many cases, this can be corrected by deleting the user cached data. To do this, quit all instances of Internet Explorer, and then delete the whole UserData, or four randomly-named subfolders beneath him. (The C:\Users\[user name] \AppData\Roaming\Microsoft\Internet Explorer\UserData). Note that most of this path is system and hidden, so you will need to change attributes or explore view settings and run "As Admin", in order to see and delete the folders.

  A more extreme challenge is to remove the affected user profile (computer Properties\Advanced system Settings\User Profiles\Settings...). Deleting profile removes the data cached in IE (like many other things, like office customizations, etc.).

• VMWare Data Recovery does not properly

  Hello

  I use VMWare (VDR 2.0 - with Vsphere 5) data recovery tool. I'm tempted to save a virtual machine and the VDR said the backup was successful. But I can't restore the virtual computer. When I checked the log, I found that the vmdk is not saved.

  26/07/2012 10:22:31: normal backup using Backup1
  26/07/2012 10:23:18: created snapshot '_datarecovery_ '.
  26/07/2012 10:23:19: copy "vm1' destined ' / MNT /.
  26/07/2012 10:23:19: independent labels 'vm-153. "[datastore1] vm1/vm1.vmdk ' is not saved
  26/07/2012 10:24:13: deleted snapshot '_datarecovery_ '.
  26/07/2012 10:24:14: task completed successfully
  26/07/2012 10:24:14: finished: 3 files, 26KO
  26/07/2012 10:24:14: performance: 0.1 MB/minute
  26/07/2012 10:24:14: duration: 00:01:43 (00:00:48 idle/load/preparation)

  I use the default backup device provided with the VDR. (Cent OS 5.5). I backup virtual machines on a NFS mounted in this machine (VDR) centos.

  Can someone help me understand the problem? any help would be appreciated.

  Newspapers say it all: "26/07/2012 10:23:19: independent labels 'vm-153." "" [datastore1] vm1/vm1.vmdk "unsaved."

  This VMDK is configured as independent VMDK, independently discs are "made not snapshot ' type of drives and because of this VDR will not back up these disks.

  First of all you need to know why this drive is configured as apolitical, apolitical fashion isn't really necessary then stop VM and remove "Apolitical" mode option of this hard drive in the hardware configuration of the VM.

• Restore desde Máquina con virtual instant con Vmware data recovery

  Hola,

  This is mi consulta. Al estar Máquina instant con corriendo, el data recovery me backup finishes correctamente el, pero los discos what copia son los snapshoted.

  14/05/2012 23:01:37: progressive run to the top of the disc "[NFS_PRODUCCION] MV1/MV1-000004 - flat hard" using SCSI Hot-Add.
  14/05/2012 23:18:53: progressive run to the top of the disc "[NFS_PRODUCCION] MV1/MV1_1-000004 - flat hard" using SCSI Hot-Add.
  14/05/2012 23:43:15: progressive run to the top of the disc "[NFS_PRODUCCION] MV1/MV1_2-000004 - flat hard" using SCSI Hot-Add.
  14/05/2012 23:46:55: progressive run to the top of the disc "[NFS_PRODUCCION] MV1/MV1_3-000004 - flat hard" using SCSI Hot-Add.

  MI pregunta, TR're este backup are valido y caso as perdiera Máquina, could restaurarla completely TR? Alguien lo ha hecho alguna vez?

  El tema're tendría as hacer el commit instant Los, pero me da miedo Quebec City of algun problema y no tenga backup bueno, anterior al momento in what is genero instant los

  MUCHAS Gracias

  Hola

  UNA manera consolidarlos're doing a Clon of the VM (if the apagada tienes ira mucho mas rapido). Puedes clonarla, levantarla red sin y worm than Hay datos son consistent if, you can meet con ella

  Of todas formas piensa Québec los datos updated los mas tendras in el ultimo instant, if consolidas don't lose any real dato: en solo caso come back a UN estado ordered earlier perderlo.

  Saludos

• VmWare data recovery and work with independent labels

  I read on a forum: If you want to drive the snapshot of the virtual machine is not affected, in its properties, select the "independent". Moreover, if the virtual computer is 'Independent' disks, the snapshot cannot be included in his memory.

  There was a question if the readers to all virtual machines 'Independent', would work "VmWare Data recovery?

  I'm not sure about my discoveries. SO please don't take this as a solution to your problem. My conclusions are:

  When you start to take a vDR of backing up a virtual computer that is configured with an independent record, it will not be successful. As vDR is used to take a snapshot in order to perform the backup of a virtual computer. If the capture is here, Independent disks prevents taking snapshot.

  -GaneshNetworks-