WAV MUTE ON THE TIMELINE IN WMM FILES

Similar Questions

• As you drag the video in the Timeline, only audio files will show, not video.  Why

  Hello world!

  So I had to update to PPCC 2015 after 2014 CEP kept crashing on me while I just changed.  After having reopened the project and the program telling me to convert everything on the new 2015 PPCC, I didn't think it was a big deal.

  Well now, the old version of my project can still play all the videos, and the editing I've done, but when I try to drag in a new video to continue editing, only audio files will come in the timeline. The video will play in the window of the fine source drive, but try to get the actual image of the video in the timeline, will not be displayed.

  It makes me crazy!

  What should I do?

  It was activated at the same time. I closed my projects and rebooted my computer to see if that would do anything and now it works as usual. Thanks for your help anyway!

• Sound on the timeline problem

  Flash CS3 / Win XP
  
  -I'm simply place an audio file from the library to the stage.
  -When playback of the film, I get distorted creep "Chorus" effect.
  -I have never experienced this in previous versions of Flash or projects.
  -Audio files are all fine and it comes up with multiple formats.
  -J' I load the sound as an external file, but I need a few images of synchronization and need the wave forming in the timeline.
  
  Any ideas? Thanks in advance!

  I found it.

  It's the Audio event parameters in the publication settings dialog.

  For some reason having this set to MP3 creates the problem.

  Also sorry, this should have been posted in the General discussion area.

• Why does my audio play in the source monitor, but not in the timeline?

  I imported some MOV files in first 2015 (codec H.264, PCM Linear, timecode).  The audio plays fine in the source window, but when I drag the clip to the timeline, no audio file appears under it and there is no sound.  I followed the instructions on this link, nothing helps: no sound during playback in Adobe Premiere Pro.

  These clips were filmed on a GH4.  I was shooting 1080 24 fps.  Before this problem I was shooting on a Canon 5 d.  Is it possible that it is the codec?

  Video playback in the timeline panel is also trolling and jittering a bit, but normally play in the source monitor.

  If anyone can help, please excessively it because I am not very fluent in the first.  Thank you.

  Source patch http://forums.adobe.com/thread/1442800?tstart=0 can help

• Truncated in the output MP4 FLV files

  I have half a dozen isnerted FLV in my presentation. They play very well when I published as a SWF project.

  When I publish as MP4, FLV files is truncated; the last second or so are cut.

  Saw nothing in that regard when searching.

  Any ideas?

  I like some time on the timeline plays FLV files.

  On another less critical note, when published as MP4, loading the FLV is captured in the video. Cheesey.

  OK, my bad. I inserted in the Media drop FLV files, as opposed to video > insert video. The diff between the video and the video of the event was lost for me somewehre along the way.

  Not sure why the Media should get boogered up.

• How to restore the original interface of first Pro CC and drag the video to the timeline?

  I downloaded the trial version doesn't have the video and audio tracks on the mounting Panel. I tried to play to find, but it's what happened instead.

  

  Can I know how to restore the original interface?

  Also, how do I drag videos to the timeline when it doesn't have any audio or video track line that I can work with, unlike the CS6 version I was using?

  Thank you.

  Hi Erica,

  To restore:

  In the menu items, choose window > workspace > reset Workspace

  To add the video to the timeline:

  • Select file > new > sequence and create a sequence. Drag the video to the new sequence.

  or

  • In the project Panel, drag your video to the new article . This will create a sequence that best matches your clips properties.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• FCP 7 - file DCS stuttering on the timeline

  Hi guys,.

  I'm having some very frustrating problems editing some DCS shot on a Nikon camera files. When I put them on the timeline, they stutter like crazy making them completely non-visible.

  The file is H.264 at 23.98 frames per second and throughput of 2.3 Mbps. image size is 1920 x 1080. File size is 69.3 MB for a one minute clip.

  I used a fairly powerful 2.26 Octo-Core Mac Pro, so would not imagine the computer is a problem.

  I have even together the RT to "Use playback settings" but that did not help either.

  Any help or advice massively welcome.

  FCP - 7 never worked properly with the H.264 hardware.

  As contributor forum Shane Ross has said, this problem is made worse because it seems like it should work, but it does not work.

  You must convert your h.264 hardware in a change before ingestion as ProRes in FCP friendly format.

  If you have a lot of material to convert, you can watch an app like change the loan:

  http://www.divergentmedia.com/editready

  MtD

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• audio clip WAV plays is not in Final Cut Pro (unless in the timeline)

  I have a few audio dialog recorded externally on syncing with my videos. It is in format wav 24-bit / 48 kHz. The problem is the audio clips will not play participate in event viewer so that I can revisit. To be more precise, when I hit the space bar the cursor moves along the clip, audio level indicators move up and down as if it is being read, but I have no audio output. However, if I drop the audio clip in the timeline panel, press space - it plays perfectly!

  Clues of what happens anyone?

  Thank you.

  10.2.3 FCPX

  Try to convert the audio 16 bit @48 kHz .aiff.

  The audio as it is, very probably turned in the Timeline to conform to the parameters of the project on the fly.

  Al

• Director of Windows compress avi file when I put in the timeline

  Hello

  I am doing a project where I need to build a Web site. I use camstudio to record the process (as a proof, that this is my own work). In any case, I have my first 23 minutes of film, and it is about 230 000 KB. I put it in WMM so I could edit the images (especially for speed it up), however, when I put in the time line, it compresses the quality considerably.

  How can I stop this?

  I made a few screenshots, so you can see yourself (with the preview full screen in WMM)

  Before putting in the timeline:

  After putting:

  Hi mrguy2039,

  I suggest you to download and install Windows Live Movie Maker, which can generate better results.

  Windows Live Movie Maker
  http://explore.live.com/Windows-Live-Movie-Maker?OS=other

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• As a prelude, you can move a subelement only made from a file in the project window to the timeline

  In the clip that I swallowed, I created a subelement. Can I make only this subelement in the chronology and not the entire file?

  HI -.

  You have 2 options, I can think. You can simply drag the subitem of the timeline. This basically brings a version cut from the original item in the Timeline. The second option is to select the subclip in the project Panel and use the EXPORT MEDIA command in the FILE menu to create a single file for all content of this subelement. Then you can import that into your project and add to the timeline-, and no reference to the original source file will be present.

  Hope this helps-

  Michael

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  Please make sure that the audio and video tracks are highlighted.

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  Hi Gilad,

  It seems more an audio problem for me.

  Please select all the clips on the timeline, right-click and select 'Remove' to separate the audio from the videos.

  Once done select Audio only in the timeline and right click to select "Render and replace. Once done, save and close the project.

  Try reading to check if it works.

  You can also try to export an XML file i.e tab of project selection.

  Go to file > export > Final Cut Pro XML

  After creating a new project > import the XML file, and then open the sequence to check.

  Vinay

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk