Error in the SDM Services

Similar Questions

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• error 1075 the dependency service does not exist or has been marked for deletion

  Im trying to find solutions for this error with windows vista. The only solutions with microsoft in the VISTA section is for xp machines. Go figure. Im trying to reboot the Client DHCP service and this is the error I get. (error 1075 the dependency service does not exist or has been marked for deletion). I tried to fix the registry key to match a working vista machine, but it did not work. This is the registry that I corrected. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP

  Just delete the registry entry and restart the system. It should work perfectly. It worked for me.

  1. Click Start, click run, type regedit in the Open box, and then click OK.
  2. In the registry editor, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
  3. Right click on the entry DependOnService , and then click remove instead of change

• No firewall or Internet, Windows Firewall errors: "0x8007042c" and "error 1068: the dependency service or group could start.

  Problem started when the McAfee Firewall shuts off and I could not turn it back on.  Also I can't activate Windows error 0x8007042c firewall.  Also no Internet access due to firewall restrictions.  Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start.  Strangely, the McAfee Firewall seems to be OK again?

  McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Windows Vista firewall problems. Error 1068: The dependency service or group

  When I try to Active my windows firewall I get
  the following message appears:

  "Windows Firewall settings cannot be displayed because the associated.
  service is not running. You want to start the windows firewall service? »

  The yes/no option.

  If I clicked 'Yes', another message appears saying:

  "Windows cannot run the Windows Firewall service.

  Okay, so I'm trying to start this service. I looked at the service
  status and stopped her, so I guess it must be started, if I click on
  beginning. However, the message:

  «Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
  Could not start.

  What else can I do to access the windows firewall?

  Hi elcri

  My apologies to zero you answer you earlier since May 3.

  I have to assume that the problem is still there?

  Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)

  Click Start
  In the box, type start search in services of
  List programs, right-click on service , and then click run as administrator
  Scroll down the list of Services until you come to (ICS) ICS

  Is it enabled or disabled?  If on, double-click top and change startup to off and stop the service.
  Reset

  I would like to know if this solves the problem or not - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall Windows gives me "error 1068: the dependency service or group could start" I am on Vista 64 bit.

  I use Vista 64 bit and my windows firewall does not illuminate. I tried to make a running manual but I get

  Error 1068: the dependency service or group could not start
  Things I've done:
  • ("Sfc/scannow") System File Checker - he says he found a problem in the Windows Firewall, but couldn't fix it.
  • MicrosoftFixit.WindowsFirewall.Run.exe Microsoft.com... problem persists
  I've done two things on the command line for (you) help to solve this problem:
  Queryex mpssvc C:\Users\Dan>SC

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  WIN32_EXIT_CODE: 1068 (0X42C)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  PID                : 0

  FLAGS:

  C:\Users\Dan>sc qc mpssvc

  [SC] QueryServiceConfig SUCCESS

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STARTUP TYPE: 2 AUTO_START

  ERROR_CONTROL: 1 NORMAL

  BINARY_PATH_NAME: C:\Windows\system32\svchost.exe k LocalServiceNoNe

  network

  LOAD_ORDER_GROUP: NetworkProvider

  TAG                : 0

  Display_name: Windows Firewall

  DEPENDENCIES: mpsdrv

  : bfe

  SERVICE_START_NAME: NT Authority\LocalService
  Help me, please?

  Hello

  I suggest that you follow the steps in troubleshooting provided in the link below to fix the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cannot-start-Windows-Firewall-Vista/d1d764c7-8978-48da-B1F1-bb3e394a9a2a

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Wireless not connect not not set error message in "error 1747: the authentication service is unknown".

  Original title: wireless connection does not

  So, I just got a laptop that has windows 7, I had to replace the internet and it keeps poping up with "error 1747: the authentication service is unknown." IV tried it get but nothing works not all boards

  Hello

  According to the description, I understand that your wireless connection is not working and give the error code that is "error 1747: the authentication service is unknown". I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  These problems may occur if the Winsock registry keys are damaged or corrupted.

  Please follow the troubleshooting methods listed below to check if his help.

  Method 1:

  Winsock corruption can cause connectivity problems. To resolve this issue by using the Network Diagnostics in Windows 7, follow these steps:

  1. Click, and then click network.
  2. Click network and sharing Center.
  3. In the network and sharing Center , click diagnose and repair.

  Note You can also access the network and sharing Center in Control Panel.

  If the problem persists, please follow the next method.

  Method 2:

  To reset Winsock for Windows 7, follow these steps:

  1. Click on , type cmd in the Search box, right-click cmd.exe, click run as administrator, and press continue.
  2. Type netsh winsock reset at the command prompt, and then press ENTER.

     Note If the command is correctly entered, you will receive an error message. Retype the command. When the command is executed successfully, a confirmation is displayed, followed by a new command prompt. Proceed to step 3.

  3. Type exit and press ENTER.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.