Way to change how the gradient background

Similar Questions

• Manual large editions with sensitive html setting. Is there a way to determine how the entries appear in the table of contents?

  I publish major textbooks with sensitive html setting. Is there a way to determine how the entries appear in the table of contents? If I publish a small section of the manual then 2nd level entries appear as eruptions under the chapter name, but if I publish the manual in its entirety then level 2 headings are not at all. I would like them to appear as the eruptions in the table of contents, but I need to publish the manual as a whole in order to keep the cross references. Any help will be greatly appreciated!

  I think that this would make clearer - and it would skip and tables of contents of books under.

• Has anything recently changed how the check of the Image on the forms?

  Has anything recently changed how the check of the Image on the forms?

  
  

  Problem

  In these few days we noticed the verification of the Image on our forms does not preclude the submission form when the values do not match.

  Form design

  To create our forms, we use the procedure described here: http://www.thrise.com/blog/create-business-catalyst-WebForms.htm . Basically, we create the form with all the fields we want to, including the verification of Image ({module_captchav2}) outside the BC. We then put the code form on a page in British Colombia and tap the Actions button then choose optimize the content.  This creates a Web form (Site Manager > Web Forms).

  The form will not work correctly: we could submit the form and get an email and Image verification would prevent the submission form if the values don't match.

  Test
  We have confirmed on two other sites, forms correctly thwarting form submission when the captcha does not match are now allowing these forms to submit (emails are always received).

  When we create a form in British Colombia, verification of the Image fact work. So we guess something changed with what happens when the button optimize content or how the check of the Image. 

  
  

  Although some not, we believe that we used to display the field of captcha with the other fields of the form when you look at the form in British Colombia (Site Manager > Web Forms), but we don't see it now.

  

  Notes

  JQuery validation check required fields, including the field of Captcha, are not empty.

  We create forms using the procedure described above, because we want to use controls of sensitive form of the Bootstrap instead layout table tags generated during the construction of the form in British Colombia.  Be able to generate startup code, while the form of construction in British Colombia would be ideal.

  We believe that if we were to display the captcha field with the other fields in the form when you look at the form in British Colombia (Site Manager > Web Forms) that the Image verification will not work correctly.

  Verification of image above refers to the choices under the Site Management > forms > misc. However, when you look at the page in the browser it actually says 'Enter verification word in the box below.

  

  

  Here is an example of an already optimized form on my site in sandbox (feel free to submit the form): http://robertstastyvittles.mybizzuka.com/contact-us

  Thank you

  sepyh

  This guide, that I personally would not follow because it neglects several key elements you need for BC forms work properly, I'm surprised that has no mention of the use case or notes of those somehow.

  -Because you have carved in the script BC for the captcha form part you will not get a correct script error on submit for the captcha. This is the first problem there.

  D ' other hand you him have not set to force validation captcha on the form in the admin. Under Site Settings > Captcha is where that option life.

  Nothing has changed in British Colombia for the captcha feature, your missing just parameters and code to make it work as expected.

• Is there a way to change/modify the logo of spinning during the loading of pages?

  I want to customize my browser Firefox, but the only thing that I found can be changed, it is the "Persona", which is only background images. I was wondering if there is a way to change the rotation icon that appears when loading a page and maybe even the buttons next and previous. Do you know if this is possible?

  Do not use the chrome: / / prefix with the images.
  Just use the name of the file that I posted above.
  This will work if the images are in the chrome folder.
  The chrome Protocol is used to access internal files and files that are contained in an extension.

  .tab-throbber[busy] {
    list-style-image: url("r.png") !important;
  }
  
  .tab-throbber[progress] {
  list-style-image: url("r.png") !important;
  }
  

• 12 ELEMENTS HAS CHANGED HOW THE FILES IN A FOLDER ARE DISPLAYED WHEN OPENING A FOLDER

  In the past, when I opened a file to select a file to process, the files I created were in order - first the RAW file, then the JPG file. I put the camera upwards in this way so that I could visually choose the RAW file in the process. Approximately 2 weeks, the two types of files are separated. First the RAW files, then the JPG files displayed. Given that I have maybe 20 or if the files in the folder, so it's difficult for me to choose the right RAW file in the process. I did a system restore and elements began to show the files in the desired sequence of JPG RAW. Today, it has returned again.

  Windows 7, PC. I did not any changes to the program that I know. I don't want to have to restore every week or two in order to resume the desired files opening sequence. Either way, when I open the files outside of the elements, they are in the order: RAW, JPG.

  I'd appreciate any help.

  rockyc wrote:

  Sorry to be so obtuse, but what page I'm on when I want to do a right-click on the menu bar? Thank you

  You're in Windows Explorer, not in a page of items or view:

  

  You right-click on the free space of the title bar with the file name, date etc.

  Opens the Windows menu on the right,

  and if you click on the last option (other = other), you get the full list of criteria, you can choose for another column.

• fillColor for HBox reach the gradient background.

  Hi all!

  I have a small problem, hope someone can explain to me what I am doing wrong.

  I tried to use fillColor for < mx:HBox / > with Flex 4 (flex_sdk_4.1.0.16076)

  <mx:HBox width="100%" styleName="GradientBar">...</mx:HBox>
  
  with the following stylesheet
  
  .GradientBar {  
    cornerRadius: 5;
    paddingLeft: 7;
    paddingRight: 7;
    paddingTop: 7;
    paddingBottom: 7;
    fillColors: #FFFFFF, #FF0000;
    fillAlphas: 0.1, 1.0;  
  }
  

  When I compile it, I have a white bar, instead of the gradient bar. It seems that fillColor was ignored by HBox, only 'backgroundColor' works.

  Any help is apprechiated.

  HBox does not style inherited from fillcolors... so it does not work

  http://livedocs.Adobe.com/Flex/3/langref/MX/containers/HBox.html#styleSummary

  He was not there in flex 3 and flex 4

• Cannot change how the important windows updates are installed 7

  I can't change the settings of "Windows Update".  I don't want Windows to automatically restart my system so I put it to 'Application prior to installation', but this morning it is automatically installed and rebooted.  Now, I don't have the ability to change the parameters, as if I'm not administrator.  The option is there, but not highlighted for to change me.

  Hey CGEnterprise,

  To the configurable options for automatic updates, follow these steps.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  Step 1:

  1. go to start and type regedit.exe.

  2. go to this location:

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU

  3. in the right pane, delete the two values AUOptions and NoAutoUpdate

  4. go to that location:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate

  5. in the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor

   

  Notes:

  o you must have administrative privileges to perform these tasks.

  o Group Policy Editor is only available in the professional edition, full and Windows 7 Enterprise edition. You will not have the Publisher of local group policy available in Windows 7 Starter and Home Premium editions.

  Step 2:

   

  1. Click Start, type gpedit.msc and press ENTER.

  2. navigate to the following location:

  Computer configuration > administrative templates > Windows components > Windows Update

  3 in the right pane, double-click Configure automatic updates and set it to not configured

  4. then, go to this location:

  User configuration > administrative templates > Windows components > Windows Update

  5. in the right pane, set to remove access to all Windows Update features on not configured

  For more information:

   

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you open a new tab, placing default text in the address bar, a way to change to the new page (like Google)?

  When I click on the 'plus' for a new tab, which automatically takes me to google.com so beautiful, but the cursor is in the address bar. It seems that the cursor is in the google search box, but it's not.

  When I click on "Home" the default cursor, the search field, which I think is correct. Is there a way to have FF does not by default the address for the input text bar when you open a new tab?

  I doubt it. Google controls their research and their browser and they integrate features. But you can use "Ctrl + K" to place your cursor in the search bar"in your Firefox toolbars. By pressing the key TAB a little is a waste of time since there are a lot of links before you get to the entrance area.

  There could be an extension, if it bothers some, but I don't see a valid compromise to justify the use of an extension of something that seems trivial to me.

• Any way to change/replace the EXIF data such as the date of the photo?

  I import into Lightroom several thousand photos I took with my first digital camera, in 2000-2004. Everything went very smoothly. But here's my problem:

  In my old workflow, I spent the time of photo montage liquidated as TIF files, and stripped of any program that I used to edit the EXIF from them. Thus, for example, a photo that was taken on March 4, 2001 has the information EXIF showing it was taken on March 10, 2001, the date on which I edited and made the TIF. All other EXIF data is stripped as well, the data on exposure, lens information, ISO, if the flash is triggered, etc.. Basically, the TIF file seems to have no other than my name and the size of the file EXIF data.

  I can't live without the other info, really, but the change of information on the initial date/time means that the TIF file is not sort next to the original file in Lightroom, which I want to do. There are not thousands of photos that I have hair, a few hundred maximum.

  Is it possible with a plugin or an external program to copy EXIF information in the original program and insert it in the TIF file?

  To change the date to use the Edit capture time option located under library > metadata menu.

  

• Is there a way to change all the variables of the form variables URLs?

  Is it possible to change or copy all the variables in the url, so they have a scope limited as variables of form with a single statement?

  For example:

  < cfset form.var1 = url.var1 >

  < cfset form.var2 = url.var2 >

  < cfset form.var3 = url.var3 >

  Is this possible with a single statement?

  Have you tried:

  OR

  I'm not 100% sure that you can add to the scope of the form like that in all versions of the CF.

  If not, you can work with a thrid variable that you incorperate both form and url variables in.  It is a common technique in the fuse box, I think.

• How can we change all the images in the import of ref file to copy into the doc?

  Y at - it an easy way to change all the images in a file 'import by reference' to 'copy in the document '?

  The way I currently have to do is delete and re-import and resizing an image at a time and even in a

  single document with 30 images, this can take forever! Surely it more soon than that?

  My company has always used the "Import by reference" option when you add images to our frame documents.

  But things have moved on and we are now a global business and send a large number of these files to our sister sites.

  E mailing 1 file is much more logical to emailing file 1 framework and 40 image files, especially when files

  are in a different folder structure.

  ACE,

  You have a lot of good advice here on best practices, but I don't think that someone at - it answered your question. The answer is no, there is no way easy, unless you have access to the FrameScript or the FDK.

  Russ

• Shade of color shows ONLY shades of gray on the gradient layer...?

  My color chart seems to be defaulting to only shades of gray on a gradient layer, and I can just find a way to let him replace the color I chose.  After that I created a new layer of gradient fill, when I have the layer selected in the layer list on the right side of the screen, color samples show ONLY gray.  If I click on the sample, it brings up the color selector, but no matter what color I select, the swatch shows shades of gray.  If I select the background layer, it goes back to show my color.

  There's probably a simple explanation to this problem, but I was searching Google for literally hours without finding an answer.  I found some similar questions have the response "go to Image, Mode, and make sure that RGB is selected."  Mine is already set to RGB, so it's not the question.

  How can I change the colors in a gradient fill layer, and why my color chart displays grayscale only when I selected gradient fill layer, even if by clicking on the color chart reveals the color picker?

  To change/edit the gradient colors, double click on the thumbnail of the gradient in the layers panel fill

  Then in the gradient fill box, click just to the right of the gradient word to change the colors

  In the gradient editor, click one of the stages of the color at the bottom of the gradient bar and click color to change the color of this judgment

  There is much more to the gradient to the room Editor to explain on the forum, so you can view the following for more information

  Photoshop elements help | Gradients

  Using Photoshop | Gradients

  The reason for which continues to show your color in levels of gray, is the layer mask is still active with adjustment layers in photoshop elements and layer masks are grayscale

  Photoshop elements help | Layer masks

  

• Simple way to compensate for the entry of data into an EditField?

  I'm keen to make an edit field with a small image on the left inside the parameter space. I can do it with a BackgroundFactory, but when the user enters the text, it seems bad and image overlays. Is there a simple way to push the starting point of the text box away a little so that I don't cover image?  I guess this could be done with a HorizontalFieldManager, BitmapField and aText field, but it certainly wouldn't be easy because of the border that I currently use.

  I'll respond and say I found an answer that was not too demanding.

  First of all, I place a VertFieldMan with the gradient background I wanted. Then, I set up a HorizFieldMan with the border I wanted around the domestic fields and a white Uni. Then I added a bitmapfield (the image has a white BG) and a textfield to the HFM. The trick was the TextField to draw its own border, so I changed it' to border to the one created with a simple white frame. The result is that it looks like an editable with the image field to the left and the part of editable text left to right.

• Gradient background Image problem

  I created a gradient (a gray color that goes blank) and I use it as a background image. Everything is great, except for one page, which is very long. On this page, the gradient looks terrible b/c he jumps abruptly from white to dark gray.
  
  You can see what I'm talking about here: http://www.realestatepartnersadvantage.com/test/investorsearch.php
  (Choose 'National' in the drop down below and you will see how the gradient looks like once the search results are displayed.)
  
  How can I solve this problem? Do I have to make the gradient image as long as the length of the page? Or y at - it an easier way to handle this?

  1, your gradient is repeated. Assign the no repetition.

  2nd set the page background color for the background color of the
  gradient.

  --

  Walt

  "csbridges" wrote in message
  News:euhsji$LS$1@forums. Macromedia.com...
  > I created a gradient (a gray color that goes blank) and I use
  > as
  > a background image. Everything is great, except for one page, which is
  > very
  > long. On this page, the gradient looks terrible b/c of what it suddenly jumps
  > white
  > to dark gray.
  >
  > You can see what I'm talking about here:
  > http://www.realestatepartnersadvantage.com/test/investorsearch.php
  > (Choose 'National' in the menu drop-down and you will see how the)
  > gradient
  (> look once the 'National' search results is displayed.)
  >
  > How can I solve this problem? Do I have to make the gradient image as long
  > as
  > the length of the page? Or y at - it an easier way to handle this?
  >

• Exportproblem with shadow on a gradient background box

  Hi people,

  I have huge problems to export this black box with a shadow on a ;-(gradient background What is the best way to keep the shadow?

  Each time, while I hide all other layers (and also the gradient background!) and the export of the shadow box (now on a background color!) I'll take a shade with a white color in ;-( What should I do?

  Greetings from the Germany

  PNG8 pourrait be best. Png32 requires special coding to make it work in IE6, and even in this case, it may sometimes fail. See the following article:

  http://blogs.Cozi.com/Tech/2008/03/transparent-PNGs-can-deadlock-IE6.html

  PNG8 works without special coding and gives you up to 256 semi-transparent colors. (If FW does not give you your full range, try adding more with the color picker.) See the following article:

  http://www.SitePoint.com/blogs/2007/09/18/PNG8-the-clear-winner/

  If you know that none of your visitors use IE6, PNG32 should be good, though.