We can point out 2 sites main site recovery
Hello
I've already matched 2 vCenter servers and it works very well with all the rehearsals. We can point to a different primary site (3rd vCenter) the former site of recovery even?
Basically, I have only 1 site recovery with 2 main sites. How to handle this scenario?
Kind regards
Isabelle
Good luck Shivaji.
Please mark my okay if you are satisfied with the answer.
Tags: VMware
Similar Questions
-
HP laserjet 1320: hp laserjet 1320 can get out of a main input tray
Main feeder (aka tray 2 HP LaserJet 1160, 1320, 1320n, 1320nw document c00208215 page 112, I down 1320tn, responsible) is blocked. Can't get out to load paper.
Anyone encountered this problem with this printer model?
Not with this model, but with similar models.
I've seen some with wear through, sometimes plastic guides because a plastic poster on a post on the side of the cover on the status bar is missing.
What I've done is reached through the back of the printer and pushed down on the metal plate that lifts the paper and were able to get the tray of the machine.
If you have this scenario while there might be a method to fill the broken plastic area.
-
Someone can point out by some examples of these products of catalyst?
Anyone have examples that I can see to:
-Blog engine
-Customer database
-Community forums
-Integrated modules:
News/FAQ
Ad rotator
Photo galleries
Here are a few:
Blog
http://www.britishpakistanichristians.co.UK/
FAQ and Forum
http://www.tnscomms.co.UK/fibre-optics/fibre-optic-installation-specialists
Photo galleries - you can create practically any sort using the new liquid engine.
In regards to the customer database, it is not easy to show an example, but this can show you capabilities:
http://www.findasecurityguard.co.UK/
I hope that these examples will help.
-
Unable to Google check out my Site
I glued the metadata in page properties, created a CNAME for Google and nothing works.
I have re-exported my site and still google can check out my site.
Hello DiegoMarin,
What method do you use to upload your site, via HTML or FTP?
Kind regards
Ankush
-
investigating the potential use of the Site Recovery Manager
We are looking for site recovery manager. We will use this as part of our DR solution for some virtual machines in our main data center. I gather specifications on what equipment would be needed to the main data center and the data center of failover. I was wondering if I could use the material of the Datacenter for failover as a development environment when nothing is failed over to it. When there is a failover situation either of the tests or a real failover I would have built in that the development environment is stop so resources can be used for site recovery manager.
Is that what a realistic configuration that I have not dug into the details of the Site Recovery Manager at this time.
I can't control the LULU URL - so your best to use...
http://www.RTFM-ed.co.UK/?page_id=7
In addition, it goes down as a hit of RTFM, which contributes to advertising revenue...
Concerning
Mike Landry
RTFM education
Author of the book of MRS:http://stores.lulu.com/rtfm
Free PDF or printed at price
-
As suggested by Firefox, I've cleared my history and cache. Also, I downloaded and run one of the programs malicious applications recommended Firefox. I also deleted Firefox my firewall and then added it back as suggested by Firefox. I have no problem accessing the site using Internet Explorer.
HTTPS Everywhere makes it easy for you to move site to a secure connection. It's something that you can yourself on the sites where you are displaying sensitive information, so it automates this for you, but I think that it is not essential.
If you love the comfort, the extension has a function to create your own rules, as described on https://www.eff.org/https-everywhere/rulesets. It sounds a little complicated...
-
I can't add the site to my favourites ((("Star" is not active
I can't add the site to my favourites ((("Star" is not active. I clicked and nothing happens
Go to the main site, or web page that ever page you want. Right-click
a box empty page and select bookmark this Page -
I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site?
If you select that right click menu context then you block all images from this area and not a specific image, so do not use that.
- Check exceptions in tools > Options > content: Load Images > Exceptions (for example sphotos.ak.fbcdn.net)
You can use the following steps to check if the images are blocked:
- Open the web page that has the missing images in a browser tab.
- Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
- Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
- Go to the Media of the window tab "tools > Page Info.
- Select the first link of the image and scroll down through the list with the arrow down.
- If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.
-
I can't visit a site I always used in my life help me!
Hello guys, the problem is that I can not enter on a site of a game that I play, it happened recently I tryd everything to solve this problem, https://secure.tibia.com/account/?subtopic=accountmanagement is the site so I can go to www.tibia.com, but I can not connect on my character on the secure.tibia.com I can not enter He said this in English:
Internet Explorer cannot display this webpage
This problem may be caused by a variety of issues, including:- Internet connectivity has been lost.
- The site is temporarily unavailable.
- The provider of Internet services (DNS, Domain Name Server) is not accessible.
- The Internet (DNS, Domain Name Server) service provider doesn't have a list of domain of the Web site.
- There could be a typing error in the address.
- If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced and make sure that the SSL and TLS protocols are enabled under the Security section.
hope you guys can help out me
Spybot or CCleaner is an antivirus. I suggest you do the analysis described the link I already gave you if you do not have an antivirus installed. Do not skip the preparatory work. If the computer is really clean and you leave the information on your antivirus, since you can get all the other secure sites use CCleaner and get rid of all your temporary Internet files, history, cache, etc, and try again. I wouldn't do this last piece until you're really, really sure that your computer is free of viruses/malware. MS - MVP - Elephant Boy computers - don't panic!
-
I'm so frustrated! Whenever there is an update in Muse and I opened my site it converts it back up. Tells me to save it as something else, etc... When I finally opened my website to work on it I have updated a page. Then, after all, I noticed it was not the last one, I worked on because the homepage and other pages are all wrong. Rather than redo everything that I exported the site, put on a page I've finally updated and is there a way to recover Muse? Also, I'm moving a lot. My site is in my creative cloud folder, so I can go from one computer to the other. I also have a lot of 'conflict' with the site on my laptop and desktop. How to spend it? I think I might have to 'disconnect' each time of computers also is always true? Thanks for anyone who can help out me.
So that the file be sure you want to synchronize to creative cloud and down to your other computers/devices, you must close the file in Muse. If the file is opened in two different copies of Muse, you'll end up with warnings of 'conflict' of creative clouds and the file duplicates in your Cloud Files .muse creation folder. A single .muse file cannot be updated simultaneously by two different copies of Muse.
-
I bought a picture but when I downloaded it, it always says "Adobe Stock" on it. Is this normal? I thought that once I bought article which could disappear as I would really like to use the point on Web sites, etc. Help, please.
You can also check:FAQ: where can I find useful links on the use of Adobe Stock?
I'm moving this discussion Adobe stock
-
SHARED-UNKNOWN-ERROR: 22-What does this mean? can not post the site that this error when I try.
Hello
Please sign of Muse and identify yourself again and try to publish.
You have the option of disconnecting help > Sign Out
In the case that do not fix the issue made me know.
Concerning
Vivek
-
After that download site on the internet Web browser says page not found, file 'null' is not found. Also in the Muse I can't preview the site or pages more. Never had a problem and now I don't know what to do. In Safari and Google Chrome there is no problem on the internet, but I can't be seen.
OK, so your last post, it seems the widgets are the cause of the problem. Let's see if we can understand why:
- Have you tried to create a NEW Widget of emptiness of Composition and which fill with new content?
- Have you tried a full download instead of only changed files?
- Also can you check with domain host that send you to the right directory, and whether or not they have made changes to the ftp upload?
- When you export the site in HTML format instead of FTP download and compare the files that are generated in the HTML folder, they are identical to those published via FTP?
If this does not help, it would be useful that you could provide us some screenshots of errors you are seeing, you use parameters of publication etc. (you can block-out user name and password for security reasons of course).
CARI
-
I'm re pointing to my site on my page of catalyst for business, but when I go to the page it comes up
"No Start Page cannot display this Web Site no Start Page has been configured. To configure a default start page, set one of your Web Pages to the Start Page. Please contact your administrator for more information. »
Also my designer has problems downloading design muse on my account. It goes right to his.
dose - anyone have ideas?
He is an admin user on your site (where you want the content of the forthcoming Muse), to see your site (the URL of your site) in the drop-down list when it will publish.
So if he sees not the URL of the site that he cannot publish on your site, the selection of a new site will always create a new trial on his partner's account and not yours. Check and make sure that the person (Designer) in which the Project Muse is an admin on your site, so it can be seen in the list of available sites where he can publish the project.
If you need only send me a private message with details of the URL of your site, the designer ID and I'll check more, but basically make sure that he is an admin on your site and then it should be able to publish the Project Muse to your URL.
See you soon,.
Cristian
-
Why this error is launched: "the file does not appear to point to the site.
Hello
This error comes usually when you publish your site not in the appropriate folder.
Can you republish your site to "public_html" folder since it is generally the case that most accommodation use of service to websites default host providers.
Hope this helps
Kind regards
Rohit Nair
Maybe you are looking for
-
Tool/address bar is missing & 'Still see the toolbar' is grayed out. I tried to drag / drop to customize the toolbar. Any Suggestions?
-
Why welcome to tab toolbar Yahoo continue to flock to the top?
A few days ago a Yahoo toolbar updated for Firefox updated itself automatically installed. Even after numerous attempts to get rid of the toolbar, re - download and reinstall the toolbar and even get rid of Firefox and re-installing Firefox, welcome
-
Hello I'm developing a remote monitoring application using a cRIO-9012 and various modules of e/s. I wanted to use the web services on the cRIO feature but I'm having a hard time in some areas. The first is how to get the web service running on the c
-
Windows 7 driver needed for 64 bit phaser xerox 3121
original title: xerox phaser 3121 64-bit HelloI have a Xerox Phaser 3121 printer but Windows 7 64-bit isn't the driver for it. Microsoft Web site says that it is compatible, but is not... :(Anyone know what to do, or if there is a driver for it? I co
-
After you install the updates of August 2014, my keyboard/USB wireless mouse has stopped working, and the receiver is marked as "Device USB Composite" with code 52 - cannot verify the signature of the driver. Really, the usbccgp.sys to Windows 7 file