"We cannot find HD Audio"

Similar Questions

• Cannot find driver audio Acer Aspire One 725 for 32-bit on the site Acer Download Driver for Windows 8

  Hello

  I'm on Acer Aspire One 725 and recently upgrade my netbook in Windows 8 Pro 32-bit.  All the driver provided by the works of perfect Acer.  But sometimes, the quality of audio playback ' by clicking on ' sounds.

  I want to download the driver audir, but I can't find an audio driver for Windows 8 32-bit download driver Acer.

  Can someone help me?

  Thanks in advance.

  Best regards

  Indraraja

  [private under the leadership of life]

  All drivers available are displayed on our site for drivers.

  If a driver is not displayed, it means that a new driver is not available or is not necessary, as Windows provides a suitable driver for the system component.

• My mx6920 gateway upgraded to windows 7 now headphone works but no delegation cannot find the audio device

  I recently updated my mx6920 gateway for windows 7 and now, for some reason any laptop speakers will not work. The headphone jack works though. I tried to install the Audio drivers high definition on the RealTek site and was unsuccessful because windows has taught me that the driver is not the right one for the type of windows. Even when using the compatibility feature, does the same thing that I tried to use the Sigmatel drivers from the site of the bridge. These drivers ended up with the same problem. I checked Device Manager and it indicates that the audio device works. Who should ask me why do I hear audio from the headphone jack, but not the laptop speakers.

  any help you could give me would be greatly appreciated

  Thank you

  Hello

  We can refer to this article and check if that helps.

  http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3155

  You can also contact Support technique Gateway here: http://us.gateway.com/gw/en/US/content/contactus

  Thank you.

• Audio beats cannot find the .startup file

  Whenever I try to use the Panel Audio Beats on my Pavillion DV6-6102AX it comes up with the error "cannot find the .startup file! I use Windows 7 64 bit and I also tried to reinstall the audio driver IDT, but that did not solve my problem.

  Hello

  Try the following.

  Open Windows Control Panel, open programs and feature, do a right click the entry for IDT Audio and choose uninstall.  Once this process is complete, restart the laptop.

  When windows has completely recharged, download (unless you already have this file) and install the latest driver IDT at the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  Yet once, once the installation is complete, reboot the laptop.

  Kind regards

  DP - K

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.

• Beats Audio cannot find the boot file?

  So, today, out of the blue, Beats Audio has stopped working.

  I didn't make any changes whatsoever still Beats Audio suddenly stopped working.

  IE error message "cannot find the file .startup!.»

  Is there a solution that does not uninstall the sound drivers? I have bad experiences with uninstall drivers and I don't want to risk losing the audio from my laptop.

  Hello

  Interface audio beats is part of the package IDT audio software, so if there is missing a definition file, you will have to reinstall.

  Try to use Recovery Manager to reinstall your original software from IDT - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  When this has completed, restart the laptop.

  If the above is not correct the problem, after return with the following details.

  1. the full model number and your cell phone Nr - see here for a guide to the location of such information.

  2 the full version of the operating system that you use (IE Windows 7 64-bit).

  Kind regards

  DP - K

• Audio service does not not after download of Creative, restarts, error 0 x 80070002, the system cannot find the file specified

  Yesterday, I downloaded and installed updated Creative to my its Soundblaster card from Windows Update.  It lead me to a large download of Creative for its console related sound and SW, and things worked fine.  When I restarted this morning, there was a horrible loud hum while Windows was loading, and I made a hard stop.  When I rebooted, the buzz was gone, but the icon in the status bar indicates that the sound was off.  The sound message indicates that the audio service is not running.  I tried to restart the computer several times, but the results were the same.  I tried to restart the audio service of the Task Manager, but got an error message 0 x 80070002, the system cannot find the file specified.  Where should I go from here?

  Hi Jfklinger,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1.right - click on the speaker icon in the notification area, and then click devices recording or reading.
  2. double-click - click the device for which you want to set the parameters. For example, double-click on Microphone.
  3. click on the levels tab.
  4. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  Method 2: use Control Panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. click on Start, click Control Panel, click hardware and soundand then click sound.
  2. click on the tab playback or recording .
  3. double click the device for which you want to set the parameters. For example, double-click on Microphone.
  4. click on the levels tab.
  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
  http://support.Microsoft.com/kb/930095

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• on windows xp, there was a windows audio converter cannot find a Windows 7

  Can not find an audio convert to windows7

  Hello

  There is no audio converters built into windows 7. I suggest you use your favorite search engine and search for audio converter.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• iPhone 6 cannot find the device bluetooth audio

  My iPhone 6 (IOS version 9.3.5) Impossible to find a new bluetooth device and keep the search bluetooth unanswered.  In addition, reception (when listening i-tune) is bad and intermittent.  Appreciate advice how to solve this problem.  Thank you.

  Hello ChengMY,

  Thank you for using communities of Apple Support.

  If I understand your message that your iPhone 6 (which is updated to iOS 9.3.5) cannot find a new Bluetooth device and don't stop looking for him. What type of device Bluetooth you are willing to pair with your iPhone? The reason why I ask, is that there are only some that the iPhone supports Bluetooth profiles. Here is a list of the supported Bluetooth profiles:

  iOS: supported Bluetooth profiles

  If the device you are using uses one of the supported Bluetooth profiles, the steps described in the following article can help solve the problem for you:

  Get help connection an accessory with your iPad, iPhone or iPod touch Bluetooth

  Best regards

• Cannot find a Beats audio Downloader.

  I reinstalled my laptop.

  So, I lost all my programs, but I have a large part of them restored.

  Find an audio Beats Installer?

  Envy17-3001er

  Hello

  Beats Audio interface is installed by the software Audio IDT - for Windows 7, the installation program you need is on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Satellite L40 - Windows Xp cannot find wireless networks

  Hello

  Ive got this Satelite L40 - 17u which I upgraded to xp, I recently installed the audio driver which is a - ok and went to install WiFi realtek RTL8187B driver ehich I got the toshiba site, which installed but cannot find all the networks, ethernet is very well and everything works perfectly except that it may not pick up all networs wireless too bad mine which works perfectly as im typing this one Acer. Any ideas how to solve this problem, guys?

  Thank you

  Steven

  Can you turn on/off wireless card using the FN + F8 key combination?

• Error 2: The system cannot find the specified file

  Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

  Help, please
  Sam

  What version of Windows, including service pack (right click on my computer > properties)

  What past just before the problem arises?

  Click Start > run > services.msc > OK
  Scroll down to "Windows Audio"

  The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

  Search for your system (probably C :) drive
          
  audiosrv. DL (it's only one L)

  Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

  You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

  If she is not there, it should be in C:\Windows\ServicePackFiles\i386

  If it's not there either, you have a file named audiosrv.dl_ in C:\i386?

• Windows tells me it cannot find the files to play in one of my music, why is this?

  When I click on any track, I get a message saying that Windows Media Player cannot find the file. Why is this and how to solve the problem?

  Hello

  (1) is this problem occurs with any format of file in particular?

  (2) what is the exact error message?

  (3) have you made recent changes to the computer before the show?

  I suggest to refer to the following articles and perform the troubleshooting steps out there.

  Method 1: Solve the video issues in Windows Media Player and other media or library

  Run the Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2:

  You receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.Microsoft.com/kb/926373

• Windows Media Player cannot find the file. 'If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'.

  Original title:

  Problems with rip audio CDs with windows media player

  Bought the CD now 82 and try to tear with the windows media player player, but keep getting the message "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted." What should I do to rip this cd please did tear previously no probs, but now seems to have a problem

  Thanks in advance

  Anne

  Hello
  1. You did changes to the computer before the show?
  2. Are you able to extract other CDs using Windows media Player?
  3. What is the file format of the file you are trying to extract?
  Method 1:
  Step 1:
  You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  Step 2:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  
  Method 2: Rebuild the windows media player.

  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder, and then click delete on the file menu.

  Note:
  You don't have to remove the folders that are in this folder.
  c. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft, and then click OK.
  c. Select the Media Player folder, and then click delete on the file menu.
  d. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.

  Method 3: Disable and enable the windows media player. Follow these steps:

  a. open the Control Panel from the Start menu.
  b. open programs and features in Control Panel .
  
  Note: If the programs and features are not available, change the view by large icons at the top right of the control panel.

  c. Select Windows turn on or off features in the left column of the window programs and features.
  d. click on the plus sign next to multimedia functions.
  e. uncheck Windows Media player and then click OK. (You may receive a warning message. Click on the Yes button.)
  f. restart your computer.
  g. to reactivate the Media center follow the same steps and place a checkmark for Windows Media player.
  h. click on the Ok button.

  
  i. restart your computer.
  Reference:
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Method 4:
  Change the location of Rip. see the steps mentioned in the link
  given below:
  To change rip settings in the Options dialog box
  
  
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
  I hope this helps!