MMIC vs IPMI on B and C series UCS

Similar Questions

• Difference between the Tecra A, M and S series

  Hello
  What really is the difference between a, M and S Tecra series? Which should I choose?
  It is obvious that the Tecra is supposed to be a high-end standard in the range of the portable Toshiba, but why they do different Tecra series?

  I'm sorry if this has never asked, but can't find the answer.
  And thanks to all who responded.

  Regars,
  -nov

  Hello

  I am user Tecra M and each series has my own opinion design and hardware configuration. The availability of different series can be nice for potential buyers and costumers let them choose the preferred product.

  If you need Tecra for business, I can really recommend laptop Tecra. I use it more than two years and it works like the first day. It is very important that you know exactly what you want to do exactly, and you can choose your favorite.

  If you want to write what you expect from a laptop. It will be perhaps easier to give you a specific recommendation.

  Good bye

• Floppy disk drives for Satellite Pro 4200 and 4300 series

  I have four portable Satellite Pro - a 4340, a 4310, a 4270 and a 4280 and I have trouble getting the 4310 and 4270 to recognize a particular floppy drive. My understanding is that Mitsumi D353G FDDs were consistent with these laptops 4200 and 4300 series but I can't get the 4270 and the 4310 for «see» They will all be two however 'see' an FDD alternative I - a Pansonic JU-226A202FC, but I only have one of them and two laptops needing a floppy drive replacement. I tried a D353G I know (from my 4280) works in the 4310 and the 4270 but nothing helped. I'm keeping an eye on for an another Pansonic JU - 226A202FC FDD on ebay but no luck so far. It's frustrating because I don't know a FDD D353G expected to operate in the 4270 4310 and I have two spare ones that I wanted to use. I looked in TSETUP.exe and you can see no settings that I can change to make these laptops see floppy D353G so any help or insight greatly appreciated readers. Someone there a 4270 a 4310 runs successfully a floppy D353G drive or is this a quirk and these two particular models were made only to work with a Pansonic JU-226A202FC floppy drive not D353G disk drives? Clues?

  Hello

  Unfortunately, I am not a technician but I guess that there is clearly a problem with compatibility. It is possible that the assignment of pins is different and you cannot use them. If you want to have a precise explanation, you should contact technicians. I'm sure they have diagrams of the motherboard and can give you a good explanation and Tips how to handle this problem.

  Good luck!

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.

• Games similar to the command and conquer series?

  Can someone recommend me a list of strategy games that is similar to the command and Conquer Series(Command and Conquer Red Alert;) Yuri revenge; Tiberium Sun, etc.) ?

  One who can run with this old PC platform:

  Microsoft Windows XP SP3
  Intel Pentium IV CPU 2.00 GHZ
  256 RAM
  Radeon 7000 / Radeon VE Family (Microsoft Corporation)

  Thank you!

  Hi saudate,
   

  Please use your favorite search engine and look for one of these programs that is used but be sure to check the system requirements for the game to check its compatibility with the operating system.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• Differences between 2000 WLC and 4400 series

  In addition to the number of access points supported, what are the differences in features between the WLC 2000 and 4400 series?

  On 2006, you have 4 ports on the back, which can support up to 3 AP directly connected and the port other than your connection to the network and it supports no LAG (aggregation of links). The ports are 10 / 100M, and he cannot be an anchor for a group of mobility.

  On the 4400, either you have a 4402 or a 4404, 2 a 2 interfaces concert and the 4404 has 4 Gig interfaces, you cannot directly connect AP to a 4400. The two 4400's support LAG, and they can serve as anchor points in a group of mobility. What are the major differences in them. They set up near the top of the same and interact with the trendy and the same wireless networks.

• Protocols for switches 300 and 500 series

  These protocols are supported by the 300 and 500 series switches?

  • TCP
  • UDP/Unicast
  • UDP/Multicast
  • UPnP
  • RTCP
  • RTSP

  Thank you

  Dear Alejandro,

  If you mean the switch weather can pass through these protocols the answer is a definitive Yes. If you meant something can else you please describe what you mean?

  For example, THAT TCP is supported in a way that it can filter traffic based on the TCP port (layer feature 3 +), so can he do to UDP. Multicast is also managed through IGMP support. About RTCP and RTSP how / why would you use it?

  Thank you and best regards,

  Zsolt

• I'm trying to generate an arithmetic and geometric series/sequence with JavaScript.

  I try to generate an average arithmetic and geometric
  series/sequence with JavaScript. The thing that makes this challenge is that
  I use user input to determine the parts of the formula that I use for
  generate each sequence. I tried running the formulas, but I learned that I was
  channels running through them and not numbers. How to generate my
  sequences/series and always use user input? PS, here's my formulas: (a1-East
  first term, d and r are difference/ratio, and n is the n-th term)
  

  1.) a1 + d * n  

  2.)a1 * r^n

  Entry user of a form is always a string. There are several ways to convert a string to a number in JavaScript:

  • Pass it as an argument to Number()
  • Pass it as an argument to parseInt() (for an integer)
  • Pass it as an argument to parseFloat() (for a floating-point number)

• I downloaded an upgrade LR6 - just got an email that took my 30 day trial period end - I and #s series LR5 LR6 - how do I turn on beyond the trial?

  I downloaded an upgrade LR6 - just got an email that took my 30 day trial period end - I and #s series LR5 LR6 - how do I turn on beyond the trial?

  Go to Lightroom > help >. Disconnect

  1. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /users/folder/Library/Application Support / Adobe / OOBE
  2. Rename the file opm.db in opm_old.db
  3. Launch of Lightroom
  4. Enter the serial number

• Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired,)

  Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired, haha)... hoping someone can help, please and thank you

  You can try with below steps if you want:

  Folder Temp light 1).

  (2) close all running Applications.

  (3) close webistes all opened browser.

  (4)disable the firewall temporarily.

  (5) open only Adobe Web site as it is safe and secure site free of all kind of threats.

  (6) then try to download CS 6 Design Standard and check.

  Note: Though the firewall is disabled. do not open applications, files or even other Web sites.

  Or if you think it is still very slow and would not turn off the firewall , you can try with 3' rd party like download managers: IInternet Download Manager , which is more efficient than the browser built in downloader.

• The maximum size of HARD drive the BIOS sees in Satellite Pro 4200 and 4300 series systems

  I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.

  I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.

  Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?

  What is the largest swap HDD that someone did with success on these machines of 4200/4300?

  Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.

  By the way: 60 GB HARD drive is not sufficient for you?

• What is the difference between the Satellite Pro 4200 and 4300 series?

  As mentioned in another thread, I have a SP4220XCDT that died on me.

  I bought a mobo on ebay which was a 4290 and today it happened, but the problem was that there was an apparently fixed CPU, which stands out much less of the Council than that of the Board of Directors 4220 and therefore does not connect with my 4220 cooling mechanism.

  At least something comes on when I start now, but unfortunately he has passed the Toshiba screen that tells you to press F2 for boot sequence.

  Having also spent money on a new CPU and memory, I don't want it let go and I've seen a motherboard available suitable for a 4320/40/60 - does anyone know if it will agree with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the motherboard 4220.

  I'm assuming that these may be compatible since I managed to find a pdf of a service manual that covers both the 4200 and 4300, although unfortunately the first page is missing, so I don't ' know if that highlights any differences.

  It's frustrating that there's no PDF for these older models, at least with the plug on them, and it is very difficult to find info.

  As usual, thanks for any help!

  Hello

  As far as I know the two series using the Intel Mobile Pentium III with MMX microprocessor? Technology.

  I discovered these details:

  Satellite 4260 series: Mobile Pentium III 450 MHz
  4270 satellite series: Intel Mobile Celeron 500 MHz
  Satellite 4280 series: Mobile Pentium III 500 MHz

  Satellite 4320 series: Mobile Pentium III 600 MHz with Intel SpeedStep technology
  Satellite 4340 series: Mobile Pentium III 650 MHz with Intel SpeedStep technology

  Portable measures should be also the same. So in my opinion, it should be possible to use the same motherboard for Satellite Pro 4200 and 4300.

• Web interface and communication series

  I just started reading on the user Web interface. It seems useful, but I could not, how do I connect an application user Web interface with some series/USB instrument, for example. Is it possible to have VISAS screws normals and other toolkits within the user Web interface? Or maybe, it would be possible to develop a stand-alone application using LabVIEW (and all the screw and tool boxes that I am used to), and then import into the user Web interface?

  Thank you

  Marcelo

  That's basically correct - LabVIEW code cannot be imported and you can not directly interface with hardware - and is the only authorized communication with web services (LabVIEW or otherwise).

  So if you have any material you want with the Web Interface Builder interface, you will need to build a web service of LabVIEW that outlined some of the features and then consuming the Builder UI with the functionality of the Web Service to import.

• X 220 and Mini Series 3 with USB 3.0

  Hello

  I am recently received a Mini Series 3 with USB 3.0 for my laptop company ThinkPad X 220 Windows 7 64 bit.

  However, after installation of the USB 3.0 driver downloaded from the Lenovo Web site, I still do not see USB 3.0 in my Device Manager device.

  I have also some test using an USB3.0 external HDD but the USB 3.0 port seems to have exactly the same speed as all the other ports.

  How can I activate USB3.0 on this Docking Station?

  Thank you

  Jeremy

  ThinkPad X 220 with i7 (i3 and i5 has usb 2.0 ports only) has a single USB 3.0 port, but the way it is connected through the motherboard, it is unable to support port additional usb 3.0 from the dock.

• Only Tx and Rx series once

  Hi all

  I have problems with my VI to communicate via a controller NewFocus serial.

  The problem is that I have to put the command and enable the control of writing until I run the VI.

  The order, for example the WORM, would then Tx and Rx the correct answer, I would be. However, I can't send another command after the initial order has been sent when the VI has been managed.

  If I'm not mistaken, I should be able to send different commands and their appropriate response while the serial port remains open.

  It is true, as I have tried with the pins Tx and Rx enough shorted for a loopback test.

  I have no problem what so ever communicates with the controller of NewFocus via Hyperterminal.

  The serial connection settings are the following: 19200 baud, 8 bits of information, 1 stop bit, no parity, no flow control.

  My VI which is a modified version of the Advance reading and writing example VI series is attached.

  I don't know what is happening...
  Any help is very appreciated. Thank you!

  You should not need to use the node property to define the character of endpoint. I'm not aware of any limitation on the stop character, albeit that it may have been a few reports of strange behavior with x 00 or Beffort.

  I think I found the problem: a careful reading of the help files seems to indicate that there is only a single character. The same value is used to read and write! Thus when the VISA series Config VI runs it affects the stop character >. Then the node property it replaces \r.  The solution is to use > Config, will turn off termination characters to write and programmatically add the \r writing in the buffer.

  It works on my serial port, when I have a backward loop connected (connected to TxD RxD) and I understand not > in the write buffer.

  Lynn