Web interface for updating Subvars

Similar Questions

• Apple a day will include Messages in the web interface for iCloud?

  Hello world

  That I really like to write my text Messages on my iMac and MacBook Pro, I was wondering if, one day, we will be able to send text messages from the web interface for iCloud.

  I mean, the 'Messages' application might appear with all the others.

  

  During my short time with an Android phone, I used text powerful app. I had to associate the application phone on a Google account and connect to the web interface powerful text with the same Google account.

  It was pretty cool and useful.

  So, I'm thinking the solution to include 'Messages' to iCloud so that non-iMac users could write SMS with their keyboard too.

  THX.

  This is a user to user community, Apple will not read your comments, if you have any suggestions that you think might improve iCloud, you can send Apple your your comments here.

• M600 No. Web Interface after update to 1.11 to 1.65 iDRAC

  Hello!

  We have a few M600s which have not been updated for a while and are still ongoing iDRAC 1.11. When we update to 1.65 that they do not always have a Web Interface like some of our other M600s which have been maintained over the years. Looking at the scans Nmap and Wireshark, it seems that port 443 is blocked even if it is defined by default in cfgRacTuning. We tried to reset the newspapers, configuration and adjustment of different ports but not luck.

  We run CentOS 6.6 on these blades, and our upgrade method uses the file .bin on the Dell site. I was wondering if there may be another method of upgrading for those with them running old firmware.

  Thank you

  Stevie

  Found the solution.

  Looks like there's an old bug where when downloading a cert Active Directory it would replace the Dell SSL cert and we had a few old m600s that never have been set. To return to the original self-signed cert Dell iDRAC firmware must be 1.11 and run "racadm racresetcfg." All the foregoing 1.11 does not seem to reset the cert.

  The other solution is to download a signed CA certificate.

• Would it be possible to have the 'Messages' app in the web interface for iCloud?

  I love writing my TEXT with my iMac or my Macbook.

  But when I'm at work, I'm working on a Windows PC.

  So I was wonderning if, one day, Apple could add this app to interface web iCloud.

  This year only, I used an Android phone, I did it with a third-party application (called MightyText).

  A small part has been installed on the phone and wrote messages on the web interface of MughtyText.

  Send your request for feedback:

  Return of goods - Apple

• Unable to access the web interface for SG200-18

  Hello

  I got a new switch and I am trying to connect a UCS.  I ping the switch very well, but when I try to use IE8 or firefox, I can't go to the web interface to configure.

  Here is my configuration:

  Cisco UCS C210 M2

  IP = 192.168.1.100

  Subnet = 255.555.255.0

  Default gateway = 192.168.1.1

  Switch SG200-18

  Default IP = 192.168.1.254 (it is not DHCP)

  Any pointers?

  Tom G

  You need to set a static IP on the PC that is connected to the switch. The IP address of the PC

  must be on the same subnet as the 192.168.1.254.  You may need to try something lower to IE8. Should be

  works with Firefox and IE7. There is also a browser called GreenBrowser which works usually with switches.

  Thank you

  Rick Roe

  Cisco Small Business Support Center

• Not able to connect to the web interface for a C20

  I have a C20 running 6.0.1 and impossible to access the web interface. I checked all the IP settings using the remote and have achieved nothing out of the ordinary. I am able to ping the C20 and get the cisco logo on the tab of the internet Explorer, but cannot connect. Someone at - it experianced this before?

  Hi Justin,

  Where you can do telnet/ssh to the codec and only the web interface does not come to the top, well want to check HTTP and HTTPS mode and turn it on according to the requirement;

  xConfiguration HTTP NetworkServices Mode: on

  xConfiguration HTTPS NetworkServices Mode: on

  In addition, it is registered on any CUCM?

• ESA how to pin a specific traffic on a specific interface for mail flow?

  We have an ESA Ironport virtualized and normally he was running an interface on our DMZ, 192.168.1.200.

  On this DMZ, the firewall allows only the 10.1.1.10 to 192.168.1.200 internal mail server mail flow to and from, more obviously other traffic as DNS and web for filter updates.

  However, I would like to integrate with AD, so for this reason I had to connect to another interface on our LAN in vmware, and in config to Ironport ESA I implemented this interface on the local network of 10.1.1.200.  I have all services off the power on this interface, in order to access the web INTERFACE for spam or configuration still goes to the original interface of 192.168.1.200.

  Now, I've been able to communicate to the announcement and make an LDAP query, which is excellent, but now the incoming emails are hitting our exchange of the new 10.1.1.200 instead of the original 192.168.1.200 interface.

  When exchange sends an e-mail to, it still sends to 192.168.1.200, and Ironport addresses correctly.  But what Ironport receives by email is now send to Exchange on the new internal IP address.

  Question is can pin it so that Ironport works the 192.168.1.200 (management), the interface for all SNMP traffic?  The ONLY reason I added an internal data interface 1 is to query AD.

  Is it safe or not?

  Thank you!

  Hey Keith,.

  The details provided, I pray that ESA uses the right interface to send emails to your exchanges (192.168.1.200) instead of 10.1.1.200.

  (Assuming that the 2 interfaces, one for generally more traffic, another for only AD queries.)

  I advise you to change the following.

  GUI > System Admin > LDAP > change the LDAP interface for usage (for queries) to your new 10.1.1.200 (if you haven't already done so).

  Then, CLI > deliveryconfig

  Change the interface used for deliveries of mail to the 192.168.1.200 interface (chosen by name).

  I think that should correct the behavior.

  Kind regards

  Matthew

• LaserJet P1102w: History of how many pages each toner printed in web interface?

  Is it possible to find in the web interface for the printer, a story of when a new toner has been inserted, and how many pages it had printed upward? I know how to access this story, but from what I can tell, it only shows the current number of toner and the page.

  
  HP LaserJet p1102w

  Hi @paulri,

  I understand that you want to know the history of how many pages have been printed of each toner. I'd love to help you.

  You can print a Configuration report to get the total number of pages printed from the printer, but not individual toners.

  Printing a Configuration Page. Select the method two.

  Feel free to click on the button under the thumbs up if it helps.

  Good day!
  Thank you.

• VLAN and the SSID does not not in the Web Interface

  We have a couple of APs which do not show the VLAN and via the web interface of AP SSID.  If you go to the SSID Manager page in the web interface, the page rises but doesn't show any SSID configured.  It goes the same for Services - Vlan.  This page appears but does not show in any VLANS configured.  If you telnet to the APs, you see the mssid listed and all the SSID interfaces.  The SSID on the access point is functional and working.  It is just so hard to use the web interface for these APs.  I tried to compare configs running on APs where the web interface does not show this and APs that it shows, but cannot see any differences.

  Thank you.

  Have you tried with different browsers?

  Nicolas

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• WRT54G V3.0 Web Interface broken after FW update

  I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

  WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

  Yoohoo!

  Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

  Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

• WRT160nV2 Web Interface broken after FW update

  Hi all

  After upgrading the firmware on my router, the Web Interface is more usable. Missing buttons, etc. Even if I go directly to the 192.1681.1.1/update.asp also this page is useless and so I can't do a FW update again. The router works as all parameters was intact. But I can't make any changes to the router. How can Flash the router again? TFTP, etc.

  Best regards

  Albert

  Well, that was the problem after the firmware upgrade, you should try to downgrade the firmware of your router... Firmware build 011 v2.0.02 has some issues, so maybe after a downgrade of firmware you'll be able to see the full web interface...

  For the Downgrade of Firmware see this

  Don't forget to reset the router to factory settings after the downgrade of firmware... If the web interface is always so high an IE, click on tools > Internet Options, and then delete all files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

  If the above fails, then try another browser or another computer...

  If all above fails them, then I would say there is something wrong with the router and you should get it replaced...

• WRT54G v4 unusable web interface after firmware update

  I tried to upgrade (actually downgrade) my WRT54G v4 firmware 4.30.11 to 4.21.1. When the progress bar reaches the mark to halfway, I got the message saying that the upgrade was successful. However, now the web interface is so messed up that it is unusable. It's a sign that something went wrong.

  Power, WLAN, Ethernet 1, and Internet lights are all green solid, which should be a good sign. After the upgrade, the web interface says "WRT54G 4.21.1', which is the firmware messed up I am downloading. Browsers, then restart my computer, I have confirmed that it is a router problem, not a problem of the browser cache. I also tried to do a hard reset by pressing the reset for 30 seconds button, unplug the router while holding down the button of reset for 30 seconds and then plug the router while holding down the button of reset for another 30 seconds. This has not fixed anything.

  I encountered a similar problem after an update of the firmware several years ago and the fix to upgrade the firmware using TFTP. This time, however, the TFTP utility could not download the firmware. Using a hack that I found on the internet, I have re - download the 4.21.1 firmware, but the web interface was always messed up. I then downloaded the 4.30.13 firmware. The web interface is still messed up, but then he said "WRT54GL 4.30.13. I then went to the firmware I wanted, WRT54G 4.21.1. The web interface is still screwed up, but said «WRT54G 4.21.1»

  Anyone know how to solve the problem? Yet once, it took place immediately after a firmware update, the web interface is unusable, is not a problem of the browser cache and tried a hard reset.

  Thanks in advance if anyone can help.

  My router model is WRT54G v4. The v4 WRT54G and the WRT54GL are generally considered to be the same device with different model numbers. According to the article of Wikipedia WRT54G, "the WRT54GL is technically a reissue of the version 4 WRT54G."

  I used the firmware 4.30.X for years without problems. However, I decided to switch to the 'right' firmware for my router and something went wrong during the upgrade.

  I solved the problem. I basically just dropped the Linksys firmware and uploaded the DD open source-WRT firmware mini instead. Now everything works fine.

• SRW2016 Web Interface after Firmware Update error

  I have a new SRW2016 and after updating from 1.2.1 to 1.2.2 firmware I get an error trying to connect.  I use Firefox with IETab and the error message is:

  ... An error has occurred.

  ... You want to debug?

  ... Line 11

  ... Error: "tBodies' is null or not an object

  I tried to use Internet Explorer, but the status bar displays "error on page".

  I * really * need help!  Any ideas?

  BTW, I got the update of the firmware twice.  The first time was

  minutes and finally he stopped (I don't remember if there was a mistake

  message).  The second update seemed ends without problems.

  TIA

  Well, I was about to do the update with hypertermial/xmodem, when I thought I should check the browser interface.  And now, it's working now (even if it's really slow).

  He had to because of my recent update to Firefox v2 to v3, as well as the updated IE Tab addon.

  I hope that the web interface used the HTML standards and not require IE. It's very frustrating.